Internal Error has occurred . Check the log file for details 11g r2 on windows 8 64bit
Hi Friends,
I Have just installed on my laptop
Database : oracle 11g 64bit , on windows 8 64bit
I was successfully able to install the Database without any problem... I am able to connect from command prompt both as sys and hr user....
But when I tried to connect through EM by sys credentials...
https//localhost:1521/em
I am getting Error Internal Error has occurred . Check the log file for details....
When I checked the emoms.trc this the last few lines...
https://localhost:3938/emd/main:A००००००००३३.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 32 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:35,544 [MetadataLoad https://localhost:3938/emd/main:A००००००००३४.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 33 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:36,275 [MetadataLoad https://localhost:3938/emd/main:A००००००००३५.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 34 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:57,105 [MetadataLoad https://localhost:3938/emd/main:A००००००००३६.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 35 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:57,832 [MetadataLoad https://localhost:3938/emd/main:A००००००००३७.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 36 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:22:58,625 [MetadataLoad https://localhost:3938/emd/main:A००००००००३८.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 37 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:23:02,529 [MetadataLoad https://localhost:3938/emd/main:A००००००००३९.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 38 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:23:03,307 [MetadataLoad https://localhost:3938/emd/main:A००००००००४०.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 39 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
2013-09-02 22:23:04,107 [MetadataLoad https://localhost:3938/emd/main:A००००००००४१.xml] ERROR eml.XMLLoader markFileAsError.858 - Error repeated 40 times: ERROR-400|ORA-01841: (full) year must be between -4713 and +9999, and not be 0
ORA-06512: at "SYSMAN.EMD_LOADER", line 1779
ORA-06512: at line 1
Thanks and Regards
You could try reading what I said: change the port in the URL to 1158.
My release of windows is this,
c:\Users\John>ver
Microsoft Windows [Version 6.2.9200]
c:\Users\John>
You can ignore that junk about editions.
And by the way, there is a problem with your keyboard, it keeps inserting multiple "...." character strings.
Similar Messages
-
Internal Error has occured, Check the log file
Hello all,
After i login to my OEM grid console, i get the message
"Internal Error has occured. Check the log file for details."
once i press the OK button, i directs me to the home page as if noting has occured. I was happening rarely previosly and now its a regular thing.
Which log file am i supposed to check?
TIA,
JjHey:
I know it was a month ago when you posted. I'm getting the same messages now. Win 2K3, SP2 + all patches. Walked through basic install with Oracle's help. They're interested in emoms.trc/log and the alert log (although the alert log has been clear).
Thx
Tony -
Internal Error has occurred. Check the log file for details.
Hello Experts,
After installing Oracle 11g R2 in Windows XP (32-bit), I get the following error message when logging into https://localhost:1158/em - "Internal Error has occurred. Check the log file for details." I have extracted the following files onto one directory and used it for installation: win32_11gR2_database_1of2.zip, win32_11gR2_database_2of2.zip, p10098816_112020_WINNT_1of6, p10098816_112020_WINNT_2of6, p10404530_112030_WINNT_1of6, p10404530_112030_WINNT_2of6. I get no errors during the install. I selected "Create and configure a database". I selected "Desktop Class". I took the default locations (in step 5). Can someone please assist me?
Thank you.internal error occur with some java exception?. some tabs are accessed like administration and when you click on performance than you are get logout??
this is the problem which you are facing??> -
Folio Builder: An error has occurred opening the source file for the article layout.
I have been working on a Folio. When I sat down to work on my folio, I was instructed by indesign to update my Folio producer tools, which I did.
Since then I can no longer view any article layout from that folio in indesign. Indeed any folio that I create that does not reside on my desktop give the same problem. I can import articles, add articles and they all upload to the proper place at adobe and I can view them. But I simply cannot open them up through folio builder as I previously.
The exact error message is as below:
An error has occurred opening the source file for the article layout.
The InDesign file for the layout cannot be found.
Another strange thing that seems to be happening is that the folio will randomly reoder the articles in the folio.
I have dumped my indesign prefs, tried creating an entirely new project, made a new account and even reinstalled the entire software.
But the problem of opening an article that I have imported or added to a folio, simply not being found to open has got me stumped. I can't proceed with a major project until I can sort this out.
Can anyone help.
Many thanks
Steve
The problem initially seemed very similar to the one linked below, but I dont get the content generation error
http://forums.adobe.com/thread/901804?decorator=print&displayFullThread=trueQuestions about the Adobe Digital Publishing Suite should be posted in the DPS Forum.
http://forums.adobe.com/community/dps -
Error: License File Exception (check the log file for details): ENT_PE_NODE not found in datastore
Hi;
i have install 2 MCS 7816 (publisher and suscriber) with call manager version 6.1, i have load the files licenses for the publisher and the phones, but when i load the file license for the suscriber in publisher server i had the error messeage :
Error : License File Exception (check the log file for details): ENT_PE_NODE not found in datastore
what s the solution.
Thanks for your helpHello,
I seen this issue before, all you have to do is Contact Cisco Licensing team. In order to generate new licenses for your server.
Thanks, -
Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account. -
C1001: An internal error has occurred in the compiler on WEC2013 in VS2013
Has anyone experienced random internal compiler errors:
BUILD: [02:0000013759:ERRORE] c:\wince800\osdesigns\mytidevkit\mytidevkit\wince800\am33x_evm_bsp_armv7_retail\cesysgen\sdk\inc\crt\string.h(189) : fatal error C1001: An internal error has occurred in the compiler. {log="C:\WINCE800\platform\AM33X_EVM_BSP\SRC\DRIVERS\sd45\bldsys.log(1062)"}
BUILD: [02:0000014134:ERRORE] NMAKE : fatal error U1077: 'C:\WINCE800\sdk\bin\i386\ARM\cl.exe' : return code '0x1' {log="C:\WINCE800\platform\AM33X_EVM_BSP\SRC\DRIVERS\sd45\bldsys.log(1063)"}I experienced it in earlier WEC2013. i fixed it by disabling the code anaysis option from sources.cmn file. Just check the following variable is enabled in sources.cmn of your BSP.
CODE_ANALYSIS=1
if enabled, clear it like this
CODE_ANALYSIS=
and try again
Please mark as answer, if it is correct.
Please vote,if it is helpful post.
Vinoth.R
http://vinoth-vinothblog.blogspot.com
http://www.e-consystems.com/windowsce.asp -
Internal error has occurred in the program xla_accounting_engine_pkg.RunPAD
Hi;
I have upgrade R12.0.4 to R12.0.6 on linux system.
But it seems running slower than before, and when running the request "Create Accounting", I encontered an error as follow:
"An internal error occurred. Please inform your system administrator or support representative that:
An internal error has occurred in the program xla_accounting_engine_pkg.RunPAD."
I tried to solve the problem, followed the metalink note 466074.1, but It did not work:
https://metalink2.oracle.com/metalink/plsql/f?p=130:14:4238294359615099028::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,466074.1,1,1,1,helvetica
Is anyone know how i can do now?
Thanks
Edited by: user569417 on 2009-3-9 下午10:02Hi,
Did the concurrent program 'Validate Application Accounting Definitions' complete successfully? If yes, I suggest you enable FND debug to collect more details about the error.
Note: 458371.1 - R12: How To Get Level 12 Trace And FND Debug File For Concurrent Programs
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=458371.1
Note: 787727.1 - How to Obtain Debug Log in R12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=787727.1
Regards,
Hussein -
An internal error has occured in the secLdap plugin
I am facing an issue that I can not login to the BOE via LDAP authentification. The error returned in a message box is as follows:
"An internal error has occured in the secLdap plugin."
I tried to login to the Enterprise server from two different workstations, and it works fine. It happens only from a specific station, and it also means, that a different user can not login from that workstation. So I took traces of the communication between the workstation and the BOE, and found, that the LDAP bind request is successful, but the following GIOP request from my workstation
to 'ContinueLogon' is answered by the BOE with a GIOP 'User Exception'.
The exception id has a little more details and reads as follows: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
In a trace where the user logon request is answered correctly, this error returned from the BOE is not seen. By the way, I tested the same with completely disabled firewalls, did a complete re-install and SP install without success. I also tried two different product license keys. I am running on Windows XP, and Crystal Reports Developer v10 installation: CR Developer Product Version 10.0.5.1506 (Crystal 10 with SP6 (cr10win_en_sp6)).
I am out of ideas now. Any suggestions would be greatly appreciated.
Reagrds,
ChristianThis error generally occurs when there is a patch difference on the client machine from the server machine.
Check the version of "secldap.dll".
1. Go to the "<installation directory of BO>:\Program Files\Business Objects\Business Objects Enterprise 11.5\ win32_x86\plugins\auth\secLDAP"
2. Right click on the file secldap.dll and go to Properties.
3. Select the version tab and check the file version.
Check the same on both the client and server machines, if it is different bring the client machine to the same patch level as of the server.
Regards,
Anisa -
Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB -
Error C1001: An internal error has occurred in the compiler.
Hello,
I'm trying to a old project (VC6++) on Visual Studio 2013.But it gives me an error i don't know how to solve.I've searched google but can't find any solutions.
Here is an error:
Error 1
error C1001: An internal error has occurred in the compiler.
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\include\mutex
46 1
Shared
Compiler Output
1>------ Build started: Project: Shared, Configuration: Release Win32 ------
1> stdafx.cpp
1>C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\include\mutex(46): fatal error C1001: An internal error has occurred in the compiler.
1> (compiler file 'msc1.cpp', line 1325)
1> To work around this problem, try simplifying or changing the program near the locations listed above.
1> Please choose the Technical Support command on the Visual C++
1> Help menu, or open the Technical Support help file for more information
1> INTERNAL COMPILER ERROR in 'C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\bin\CL.exe'
1> Please choose the Technical Support command on the Visual C++
1> Help menu, or open the Technical Support help file for more information
2>------ Build started: Project: AIServer, Configuration: Release Win32 ------
2> StdAfx.cpp
2>C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\include\mutex(46): fatal error C1001: An internal error has occurred in the compiler.
2> (compiler file 'msc1.cpp', line 1325)
2> To work around this problem, try simplifying or changing the program near the locations listed above.
2> Please choose the Technical Support command on the Visual C++
2> Help menu, or open the Technical Support help file for more information
2> INTERNAL COMPILER ERROR in 'C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\bin\CL.exe'
2> Please choose the Technical Support command on the Visual C++
2> Help menu, or open the Technical Support help file for more information
========== Build: 0 succeeded, 2 failed, 0 up-to-date, 0 skipped ==========
I've tried on Visual Studio 2012 successfull but on Visual Studio 2013 gives me that error.
How can i solve this ?
Thanks...
[Sorry About English]
mbpakalin.netOne thing that smells a little funny: VC6 didn't have a mutex header. Did you add std::mutex stuff as part of your porting process? If not, it is possible that the project itself has a #include <mutex> that is now resolving to the
standard library version of mutex, but was resolving to a project file in VC6. -
LDAP configuration - An internal error has occurred in the secLdap plug-in
Hi,
I am trying to configure my BOE to a LDAP (Microsoft Active Directory Application).
After completing all the configuration steps, I get the following error:
"An internal error has occurred in the secLdap plug-in"
I chose "No SSL" and "No SSO" and used all the default values in the "Please configure how new LDAP users and aliases are created by BusinessObjects Enterprise" screen.
Can someone assist?
-DoronHi,
I'm having the same type of problem as Doran authenticating against LDAP.
The LDAP configuration is syntactically clean, not sure whether it is correct though.
Adding LDAP groups failed miserably for all listed entries, see below in Config Parms:
Configuring without LDAP groups fails with the Login Error,
Login Error Message: Account Information Not Recognized: LDAP Authentication could not log you on.
Please make sure your logon information is correct.
If your account is under any root other than dc=lgc,dc=com you must enter your dn.
(FWM 00007)
The DN for my local account,
uid=hb37406,ou=people,o=hou,dc=lgc,dc=com
Crystal Report Server 2008 authenticated against an Sun iPlanet LDAP Server.
Build Date: 2008/09/13:08:31:32
Build Number: 882
Product Version: 12.1.0.882
Config Parms:
LDAP Host:hourdldap01.lgc.com:389,ldap.corp.halliburton.com:389
LDAP Server Type: Sun Directory Server
Base LDAP Distinguished Name: dc=lgc,dc=com
ou=people,o=hou,dc=lgc,dc=com
LDAP Referral Credentials:cn=cmldap,dc=lgc,dc=com;
Password:xxxxxxxx
Number of Hops: 1
SSL authentication:Basic
LDAP single sign-on authentication:Basic
Configure new LDAP users:
Assign each added LDAP alias to an account
Creae new aliases only when user logs on
New users are created as concurrent users
Mapped LDAP Member Groups
Add LDAP group (by cn or dn)
LDAP search on local account **
uid=hb37406,ou=people,o=hou,dc=lgc,dc=com
cn=dev
cn=dev,ou=group,o=hou,dc=lgc,dc=com
ou=people,o=hou,dc=lgc,dc=com
ou=people,dc=lgc,dc=com
o=hou,dc=lgc,dc=com
dc=lgc,dc=com
dc=lgc.com
lgc.com
ou=HalUsers,dc=corp,dc=halliburton,dc=com
ou=people,dc=corp,dc=halliburton,dc=com
dc=halliburton,dc=com
LDAP configuration Error: The secLdap plugin failed to get the dn for the group xxx. -
An internal error has occurred in the secLdap plugin - CR XI (Login to Ent)
Hi,
We recently changed the authentication type on BO XI R2 Enterprise from Enterprise to LDAP mode and have been able to add and configure all the LDAP groups. We know that the authentication is successful as users have been able to successfully login via the Infoview/CMC.
However, we are facing a problem from certian workstations (for example mine) when ever we try to login to BO Enterprise via the Crystal Reports XI client thorough LDAP as it gives the error 'An internal error has occurred in the secLdap plugin'. (PS: The Enterprise Authentication mode works) From what I have understood that this error is workstation specific as the same login is successfull from another workstation.
The CR XI client on all the workstations are of the same version (11.0.0.1282) but the Windows Updates differs. For e.g.: I have Windows XP SP 3 (with the latest of the updates with IE 8)
Is there any updates to CR XI Client to solve this issue or am I missing something here?Your client is CR R1, your server is XI R2. This is a known bug. To fix you need BOE XIR1 SP3 or above. I'm not sure this was fixed in a CR service pack. Sorry I can't find a link for that right now.
Or use [this link|http://resources.businessobjects.com/support/additional_downloads/service_packs/crxir2.asp] to get CR R2, uninstall CR R1, and replace with CR R2. NOTE: they should still use the same license keys. If using CR to XIR2 you should always keep the same version so this is the preferred method.
Regards,
Tim -
"An error has occurred opening the package file" in InCopy
Hi there,
I have created an InCopy package file from InDesign CS3 (Mac). I am able to open this package file in InCopy CS3 (Mac) without error. However, two editors working in InCopy CS4 (Windows) on different machines receive the following error message when trying to open the .incp file:
"An error has occurred opening the package file"
I have read AnneMarie's excellent cautionary tales about working in a mixed CS3 / CS4 environment, but my understanding was that simply opening the initial .incp file was unlikely to produce an error.
Can anyone suggest what might be causing the error? Should we conclude that the error stems solely from a CS3 / CS4 conflict?
Thanks!
--StephenGreat tip about the masked filetype, I hadn't realized these packages were so easily extractable.
However, the error message you're receiving is adding a new layer of complexity. A quick search on these forums reveals this thread:
http://forums.adobe.com/message/2278850
That thread suggests to me that the error may be related to Snow Leopard. We're using Mac OS 10.5.7 here at work. Could I trouble you to open the file on your Windows machine to attempt to replicate the same error we're receiving in Windows here?
And are there any known issues that could prevent a user from opening a package file?
Thanks.
--Stephen -
Error updating LDAP properties: An internal error has occurred in the secLdap plugin
Post Author: kbd_vijey
CA Forum: Authentication
Hi,
We are using Environment / Tools : BusinessObjects Enterprise XI R2 ,Sun Soloris 10,Active Directory.
To Configure the LDAP, we have done from CMC - > Authentication -> LDAP.
The below steps we have followed.
1) Please enter the LDAP hosts you are using. => Here, we have entered our AD's hostname:port (Ex: 192.168.0.8:389) (Is it correct?)
2) We have passed all the required informations for all other tabs.
3) SSL - Basic(no SSL), Authentication - Basic(no SSO)
Finally its providing the error as " Error updating LDAP properties: An internal error has occurred in the secLdap plugin."
If any one have solution or faced same problem, Kindly help us to resolve it.
Thanks & Best Rgds,VijeyPost Author: TAZ
CA Forum: Authentication
There are 3 things needed to get the LDAP plugin configured.
1) Host:port
2) Base DN, usually dc=domain, dc=com
3) LDAP Administrator DN (this is not a visible attribute in AD unless you use a tool like ADSIedit or ADExplorer). You probably have to enter the Base DN instead of the username.
There are other AD specific issues when using the LDAP plugin to AD such as picking custom attributes, rules for multi domains, etc
Regards,
Tim
Maybe you are looking for
-
How can I prevent my new Mac Air from freezing in Safari
How can I prevent my new Mac Air from freezing in while using Safari?
-
I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!
I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!
-
Hi, dont know if this is the right forum but i am looking for images of the ipad to put on to our works web site. Does anybody know where i could download some that are Royality free or safe to use on a commercial website? It is to show the ipad as a
-
Transactions that reconcile sales between FI and CO
Hi, Is there any transaction that reconcile sales between FI and CO? Thanks, Stanislas
-
Hello to everybody, I looking for the meaning of the last digit in the description of oracle patchsets. For example I have the 9.2.0.4.0 patchset. I never found an 9.2.0.4.1 or an description in metalink or otn. Is there anybody can describe the mean