Internal speakers are very quiet
I got my MacBook in Summer 2006 and I am wondering if this is something to do with early models. The speakers work fine, but my problem is that they are veeeeery quiet. The room has to be next to silent for anyone to hear anything, even with everything turned up to maximum. Using headphones isn't a problem either.
I didn't think this was an issue until I met someone else with a later model MacBook whose speakers are a lot louder than mine.
Does this mean my speakers are broken or something? The MacBook has had some repairs done so if anything had happened to them, would they have noticed it or is it just how the first generation work? Any input would be appreciated.
Message was edited by: bessfn
If that is so, then why are newer models outfitted with louder speakers? I don't have the option of getting another computer any time soon, this one was a graduation gift, so I won't be getting anything else for a long time.
I also know other people with Mac and non-Mac lap tops. All of their speakers are a lot better than mine, and I just find it really odd and somewhat annoying.
Similar Messages
-
TS1630 ringtones on my iphone 3gs are very quiet volume at max
I have recently been given a iphone 3gs. Everything works fine except the ringtones and alerts are very quiet. I have turned up the volume to max. but this has little or no effect. Any help would be appreciated otherwise I have a phone which is of no use because I can't hear it when someone is calling!!!!
iPhone: Can't hear through the receiver or speakers
-
Internal speakers are gone.
My internal speakers are gone. They just disappeared. When I go to my sound preferences, I can only select bluetooth and digital line out--which I don't remember being there before.
Have you tried SMC and PRAM resets?
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Ciao. -
Satellite A50 - internal speakers are dead
Hi
My both internal speakers are not working. I plug earphone sound is ok.
Driver is ok, hardware too.
I tried to get new speakers with no success.
Can I replace the speakers with small one (I took of from my small battery radio)?
It will work or affect the MB?Hi
> I tried to get new speakers with no success.
Did you try to order the compatible speakers from the ASP in your country?
In my opinion they would be able to provide the right and compatible speakers.
In worst case (speakers are not on stock) they could order the needed parts from a Toshiba headstock.
> Can I replace the speakers with small one (I took of from my small battery radio)?
I would not recommend using any parts which are not compatible with the notebook.
The smaller speakers would not match with the notebooks chassis and you could get some problems with the installation. -
My MacBook Pro internal speakers are not working, what happened?
My MacBook Pro internal speakers are not working, what happened? If I plug in earbuds or external speakers, there is sound. In sound preferences, internal speakers are not a choice. Why doesn't my internal speakers work?
Hopefully one of these steps should solve the problem.
1. Remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
4. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it.
Best. -
HT1338 my internal speakers are not working
I went to the sound preferences, thru my system preferences menu, and my internal speakers are not listed as a choice in the "select a device for sound output". It's like the computer doesn't acknowledge their presence. I can get sound thru my headphones but not thru the built in speakers
First reset the PRAM:
http://support.apple.com/kb/PH14222
If that doesn't do it, reset the SMC:
http://support.apple.com/kb/ht3964 -
The internal speakers are not working on my macbook pro
the internal speakers are not working on my macbook pro
Are they selected under System Preferences>Sound? Or do you see something such as "Digital Output" listed instead of "Internal Speakers"?
It may be that your digital out switch is 'stuck.' This usually happens after using headphones and you can usually see a red light coming from the audio out port. You can 'fix' this by plugging and unplugging a headphone jack repeatedly until the switch is reset.
Clinton -
My computer's speakers are not putting out sound. They worked fine yesterday, and I just now started up my computer and began using it today. The internal speakers don't show up on my list of output devices in settings, and I can't adjust the volume. Any help is really appreciated!!!
They are all in the same folder and it says all images are there, but it is only showing 1 card's images at a time. Does anyone know how to fix this?
This is kind of confusing, on the one hand you say "it says all images are there" and then you directly contradict this by saying "it is only showing 1 card's images at a time".
Could you explain in a lot more detail what you see (and don't say "it", say exactly what part of Lightroom or what part of your operating system you are looking at), or show us a screen capture? -
After connecting Jawbone as headset, internal speakers are no longer usable
Hi everyone,
Thanks in advance for the help.
Powerbook Aluminum 15 inch
1.67 ghz G4
1 gig Ram
10.5.1
I paired my jawbone to my mac, and it works fine as a headset. When I decided I wanted to turn off the headset, I had a difficult time. I would disconnect it from the bluetooth preference pane, and before I could turn it off, it would try to reconnect again. Additionally, every time I would restart my computer, it would ask about the headset even when bluetooth was off.
The real problem, though, is that after finally disconnecting the headset, I would want to switch back to the internal speakers, but they won't show up as an output option on my sound preferences anymore. This can be fixed with a restart, but is very very annoying.
Any thoughts? Seems like this may just be a bug with Leopard...1.5 hours with a Genius last night and it is sorted. He tried overwriting with 10.8.2 but it would not take it so wiped drive and did fresh install of 10.8.2. Then upgraded again to 10.8.3 and all still worked.
As soon as I got to the store he booted from a network version of 10.8.2 and the speakers and cameras were fine so it was obviously not a hardware problem.
Disk utility showed issues with directory counts and that is the only thing he felt may have affected the upgrade process. My drive regularly gets very full and when I delete things it corrupts the directory.
Good news is that I have a recent backup so no permanent harm done. -
My internal speakers are not working, but my computers says they are
I get no sound with or without headphones it. I have gone into settings and made sure that I have selected internal speakers as the output device, and that they are not muted. Everything in the settings indicates that the sound is working fine, but I can't hear anything through the speakers. I have also checked to make sure sound is turned on in the applications I am using.
First reset the PRAM:
http://support.apple.com/kb/PH14222
If that doesn't do it, reset the SMC:
http://support.apple.com/kb/ht3964 -
My internal speakers are not showing up in output preferences
Head phones work fine. As soon as I unplug the head phones the sound icon goes from black to greyed out. The port works fine because if it was stuck it would not go from black to greyed out every time I plug and unplug the headphones. So the sensor is working and letting me know when the head phones are plugged in so please don't suggest a jammed port as an option. If it was stuck the icon would stay on constantly. When I look under system preferences>sound>output I only have headphones and Apple TV as an option. The internal speakers have disappeared from the list. When I reboot the macbook I get the familiar sound of the start up so I know the speakers work. I believe the problem started when we got Apple TV AirPlay but it could be a coincidence. Also I have been looking through the forums dating back to 2006 and have not found any thing that works. Thanks for any new information.
Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM -
Pv7 internal speakers are showing "not plugged in" no sound at all.
My computer was working fine and all of a sudden I had no internal sound, have a red "x" over my speaker in the corner and then speakers are showing not plugged in. I
Hi,
Could be you have disabled it by mistake. Please try this:
Right click the speakers icon,
Select Playback devices
Right click and enable something like this
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Sound from speakers is very quiet.
I was wondering if there is a way to make the sound that comes from my speakers louder. I have the volume all the way up on the computer itself and there is no volume control on the speakers. They are Polk speakers if that makes a difference. It is pretty quiet and annoying when trying to listen to music and other files. Is there a way to make this louder? Is it the sound card? Or maybe just the speakers?
Any advice would be great! Thanks!Most external speakers are self-powered (plugs into power supply) with a volume control. If these speakers are not powered, that's probably the problem. You can check by plugging in a set of regular headphones. It the headphones have a good volume range, then the output from the Mac is fine.
-
The internal speakers are making are making a strange noise on my mac
the internal speakers on my mac are making a strange noise they are working but its almost like there is some interfierence or something
Try one or both - Intel-based Macs: Resetting the System Management Controller (SMC)
OS X Mountain Lion: Reset your computer’s PRAM -
My Laptop says my internal speakers are unplugged?
I turened on my laptop and have reset it several times to attempt to fix this but when my computer tries to find a solution is says my speakers are unplugged when their internal so i cant like just plugg them in ?? Please help
Can you check the laptop's full model and part numbers from the label on the bottom? Don't include the serial number.
Turn off your laptop, unplug all wires, remove the battery, and hold the power button for thirty seconds. Afterwards, reattach the battery and connections.
- Peter
Maybe you are looking for
-
Brain battery on IPad affter update ios 8.1.2
Hi, I am using IPad 4, wifi, 16G. After i update ios to ios 8.1.2, it drains my battery. I use ~ 5 minutes, it has been worst with this drain faster by ~10%. Help me Thanks
-
I am trying to add 2 administrators to my Adobe Team. I am the Administrator (primary) I followed the instructions. Click Administrators in the left navigation pane to open the Administrators tab. Click +Add more link located at the bottom of the tab
-
Hello, I am trying to find out how to set the default Hero image when using a Muse slideshow widget and in the Layout section I have the "Free Form Thumbnails" box checked. In other words, when the page loads I want to define which image displays as
-
Exposing services with transactional interface
Hi. I'm researching the capability of offering a transactional service in the world of ESBs. I'm talking about exposing a service on the bus to the outside world with transactional capabilities, not about using transactions inside the bus. I didn't f
-
Some error in logic. unable to decipher
This program is not giving the desired output. It is accepting a two dimensional array of marks and subject code.in the super class constructor. Calculating the points of the marks with the formula, of the respective subject code, and sorting for the