(internal) Tables obsolete as parameter in function modules in ECC 6.0

Hi All,
I followed Steps 1 and 2 in the thread but when I use the following select statement I get a dump with the error enclosed.
Step1. Created a structure ZDFKKCOHI which is a replica of DFKKCOHI.
Step2. Created a table type ZDFKKCOHITABLE with line type as ZDFKKCOHI.
Step3. In my function module I have a changing parameter ZDFKKCOHIPARAM of type ZDFKKCOHITABLE.
Step 4. When I use the following select clause I am getting a dump.
DATA: wa_zdfkkcohi LIKE LINE OF zdfkkcohiparam.
SELECT *
FROM dfkkcohi
INTO CORRESPONDING FIELDS OF TABLE zdfkkcohiparam
WHERE cotyp EQ zcotyp
AND gpart EQ zgpart
AND corr_status EQ zcorr_status.
LOOP AT zdfkkcohiparam INTO wa_zdfkkcohi.
*Move IT_ZDFKKCOHI to ZDFKKCOHIOUT.
*Append ZDFKKCOHIOUT.
*Clear IT_ZDFKKCOHI.
ENDLOOP.
Error: Das laufende ABAP-Programm wollte eine Open SQL-Anweisung ausführen,
bei der die Treffermenge mit 'INTO CORRESPONDING FIELDS' in
namensgleiche Felder der Zielbereichs gestellt werden soll. Hierbei
müssen die namensgleichen Felder des Zielbereichs einen flachen Typ
haben, oder vom Typ STRING oder XSTRING sein.
Im vorliegenden Fall enthält der Zielbereich " " aber ein
namensgleiches Feld "MANDT " mit dem verbotenen internen Typ "l".
What could be wrong?
Thanks for all your help in advance.
Regards,
Divya

Translating the error message -;)
The running ABAP-program wanted to carry out an opus SQL-direction, with which the hit quantity with 'INTO
CORRESPONDING FIELDS' is supposed to be placed into name same fields the goal area. Herewith the name same
fields of the goal area must have be a flat type, or of the type STRING or XSTRING.
In the existing case, the goal area "" contains however a name same field "MANDT" with the forbidden internal type "l".
You should check you structures and assign the correct TYPE to the fields -:)
Greetings,
Blag.

Similar Messages

(internal) Tables obsolete as parameter in function modules,

Hi
As you probably can see by the question, my ABAP Knowledge isn't exactly overwhelming !
anyway:
I'm trying to create a function module in NW2004s, This functionmodule should take an internal table, based on a structure as (import) parameter.
In the earlier version, I've done this by defining it under the TAB 'Tables' in the function builder - But know its telling me that "Tables Parameters are obsolete", and that I should define it under "Changing" instead.
I have tried that, but I'm only allowed to pass a single line, and if I try to do a Loop, in the function module, it tells me that ity isn't created as an internal table.
So please - what is the "best practice" here ?
Regards
Morten Nielsen

Hi All,
I followed Steps 1 and 2 but when I use the following select statement I get a dump with the error enclosed.
Step1. Created a structure ZDFKKCOHI which is a replica of DFKKCOHI.
Step2. Created a table type ZDFKKCOHITABLE with line type as ZDFKKCOHI.
Step3. In my function module I have a changing parameter ZDFKKCOHIPARAM of type ZDFKKCOHITABLE.
Step 4. When I use the following select clause I am getting a dump.
DATA: wa_zdfkkcohi LIKE LINE OF zdfkkcohiparam.
SELECT *
FROM dfkkcohi
INTO CORRESPONDING FIELDS OF TABLE zdfkkcohiparam
WHERE cotyp EQ zcotyp
AND gpart EQ zgpart
AND corr_status EQ zcorr_status.
LOOP AT zdfkkcohiparam INTO wa_zdfkkcohi.
*Move IT_ZDFKKCOHI to ZDFKKCOHIOUT.
*Append ZDFKKCOHIOUT.
*Clear IT_ZDFKKCOHI.
ENDLOOP.
What could be wrong?
Thanks for all your help in advance.
Regards,
Divya

Accessing internal table of main program inside function module...

I have function module say ZFUNC and main program say ZMAIN and internal table defined as IT_TAB inside ZMAIN but not passed as parameter to Function module ZFUNC.
If I want to access the field value of IT_TAB of main program ZMAIN inside ZFUNC during debugging then, I simply put (ZMAIN)IT_TAB-amount in ABAP debugger and then change it when the debugger is inside ZFUNC.
How can I write code to change the value of internal table of main program in function module ZFUNC instead of doing in debugger ? I guess I have to use some field symbols, but not sure. Please suggest.
Regards,
Rajesh.

Yes, you do need to use a field symbol. Say for example, you had a internal table called IMARC in your program and you want to access it later in a funciton module, you would do something like this.
data: xmarc type marc.
field-symbols: <imarc> type marc_upl_tt.
* Assign an internal table
field = '(ZPROGRAM_NAME)IMARC[]'.
assign (field) to <imarc>.
loop at <imarc> into xmarc.
write: / xmarc-matnr, xmarc-werks.
endloop.
Regards,
Rich Heilman

How to Send Internal table to SAP Spool using Function Modules or Methods?

Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
Kiran

This is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
 W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
 P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
 MY_MONTH type T549Q-PABRP,
 STR_MY_MONTH(2) type C,
 MY_YEAR type T549Q-PABRJ,
 STR_MY_YEAR(4) type C,
 CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
 ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
 INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
 CMD like PC408-LTYPE value '/:', "command
 TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
 DOCDATA like SODOCCHGI1,
 OBJTXT like SOLISTI1 occurs 10 with header line,
 OBJPACK like SOPCKLSTI1 occurs 1 with header line,
 RECLIST like SOMLRECI1 occurs 1 with header line,
 OBJHEAD like SOLISTI1 occurs 1 with header line,
 it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 gd_buffer type string,
 l_no_of_bytes TYPE i,
 l_pdf_spoolid LIKE tsp01-rqident,
 l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
 spool_id type rspoid,
 line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
 ITAB-PERNR = P0001-PERNR.
 ITAB-ABKRS = P0001-ABKRS.
 ITAB-ENAME = P0001-ENAME.
 ITAB-USRID_LONG = P0105-USRID_LONG.
 append itab.
 clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
 clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
 refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
 select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
 and FPBEG ge W_BEGDA
 and FPEND le W_ENDDA
 and SRTZA eq 'A'.
* Produce payslip for those payroll results
 if SY-SUBRC = 0.
 call function 'GET_PAYSLIP'
 EXPORTING
 EMPLOYEE_NUMBER = ITAB-PERNR
 SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
 PAYSLIP_VARIANT = PAY_VAR
 IMPORTING
 RETURN = RETURN
 P_INFO = P_INFO
 TABLES
 P_FORM = P_FORM.
 check RETURN is initial.
* remove linetype from generated payslip
 loop at p_form.
 objbin = p_form-linda.
 append objbin.
 line_cnt = line_cnt + 1.
 endloop.
 file_length = line_cnt * 1022.
* create spool file of paylsip
 CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
 EXPORTING
 i_file_length = file_length
 IMPORTING
 e_spoolid = spool_id
 TABLES
 it_textdata = objbin.
 IF sy-subrc EQ 0.
 WRITE spool_id.
 ENDIF.
 DESCRIBE table objbin.
 DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
 CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 SRC_SPOOLID = spool_id
 NO_DIALOG = ' '
 DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
 TABLES
 PDF = pdf
 EXCEPTIONS
 ERR_NO_ABAP_SPOOLJOB = 1
 ERR_NO_SPOOLJOB = 2
 ERR_NO_PERMISSION = 3
 ERR_CONV_NOT_POSSIBLE = 4
 ERR_BAD_DESTDEVICE = 5
 USER_CANCELLED = 6
 ERR_SPOOLERROR = 7
 ERR_TEMSEERROR = 8
 ERR_BTCJOB_OPEN_FAILED = 9
 ERR_BTCJOB_SUBMIT_FAILED = 10
 ERR_BTCJOB_CLOSE_FAILED = 11
 OTHERS = 12
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 filename = 'C:\itab_to_pdf.pdf'
 filetype = 'BIN'
 TABLES
 data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
 OBJHEAD = 'Objhead'.
 append OBJHEAD.
* preparing email subject
 concatenate W_ENDDA(6)
 ' Payslip-'
 ITAB-ENAME+0(28)
 ITAB-PERNR+4(4) ')'
 into DOCDATA-OBJ_DESCR.
 DOCDATA-OBJ_NAME = 'Pay Slip'.
 DOCDATA-OBJ_LANGU = SY-LANGU.
 OBJTXT = 'Pay Slip.'.
 append OBJTXT.
*prepare email lines
 OBJTXT = DOCDATA-OBJ_DESCR.
 append OBJTXT.
 OBJTXT = 'Please find enclosed your current payslip.'.
 append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
 read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
 clear OBJPACK-TRANSF_BIN.
 OBJPACK-HEAD_START = 1.
 OBJPACK-HEAD_NUM = 0.
 OBJPACK-BODY_START = 1.
 OBJPACK-BODY_NUM = 3.
 OBJPACK-DOC_TYPE = 'RAW'.
 append OBJPACK.
* Create Message Attachment
 ATT_TYPE = 'PDF'.
 describe table OBJBIN lines TAB_LINES.
 read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
 OBJPACK-TRANSF_BIN = 'X'.
 OBJPACK-HEAD_START = 1.
 OBJPACK-HEAD_NUM = 0.
 OBJPACK-BODY_START = 1.
 OBJPACK-BODY_NUM = TAB_LINES.
 OBJPACK-DOC_TYPE = ATT_TYPE.
 OBJPACK-OBJ_NAME = 'ATTACHMENT'.
 OBJPACK-OBJ_DESCR = 'Payslip'.
 append OBJPACK.
* Create receiver list refresh RECLIST.
 clear RECLIST.
 RECLIST-RECEIVER = itab-USRID_long.
 translate RECLIST-RECEIVER to lower case.
 RECLIST-REC_TYPE = 'U'.
 append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
 call function 'SO_DOCUMENT_SEND_API1'
 exporting
 DOCUMENT_DATA = DOCDATA
 PUT_IN_OUTBOX = 'X'
 COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
 tables
 PACKING_LIST = OBJPACK
 OBJECT_HEADER = OBJHEAD
 CONTENTS_BIN = pdf
 CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
 RECEIVERS = RECLIST
 exceptions
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 DOCUMENT_TYPE_NOT_EXIST = 3
 OPERATION_NO_AUTHORIZATION = 4
 PARAMETER_ERROR = 5
 X_ERROR = 6
 ENQUEUE_ERROR = 7
 others = 8.
 if SY-SUBRC NE 0.
 ITAB-MTEXT = 'Message Not Sent to : '.
 else.
 ITAB-MTEXT = 'Message Sent to : '.
 endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
 else.
 "SY-SUBRC Not = 0
 ITAB-MTEXT = 'Payroll data not found : '.
 endif.
 "end of SY-SUBRC = 0.
 modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
 at new MTEXT.
 uline.
 write : / ITAB-MTEXT color 4 intensified on.
 write : / 'Emp. Code' color 2 intensified on,
 12 'Emp. Name' color 2 intensified on,
 54 'Email ID' color 2 intensified on.
 endat.
 write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop.

Pass internal tables in Export Parameters of Function Module

Hi
How to pass internal tables through export parametes of the calling function module. i
think i can pass it by reference ....
if so can anyone suggest how to do it?

Hi,
You can Export values of an Internal table in two ways, by :
1) specifying in Tables tab
(Not recommended since it's an obsolete in ECC 6.0)
If used, will reduce the performance of the FM
Tables are always passed by reference
2) specifying in Exports tab.
The parameter should be a Table type (created in se11)
having a Line type that refers to the structure of the data.
Pass by Value is not used for Normal Function modules.
Used usually for RFC enabled FMs.
Cheers,
Remi

Fetch data from table(ET_) which is exporting parameter of function module

Hi,
I m new to ABAP programming.
I have to develop a smartform that has to be filled in with fields from few tables.
These tables have the naming convention ET_<XXX> (i.e. exporting parameter of function module).
I m not able to directly view its contents in se11 or use select query for it.
I have a report program which i can execute to view these parameter names.
Now, how do i fetch data from these parameters/tables and pass it from my driver program to smartform??
Someone pls guide me...
Thank You.

Hi,
I have done that using Field-Symbols.
Thanks,
Preetha

Passing parameter in function module

hi friends,
I have created one function module in which i need to pass PO/SO number from standard EKKO/VBAK tables through the select option parameter S_POSONO. Inside the function module I have a select query which fetches the records from a Z-table which has a field called 'REFERENCE' which is 16-char long. Hence the length mismatches with PO/SO no which is 10-char long. the first 10-char from 'REFERENCE' is PO/SO number, next 3-char is line-item num, and the last three char is schedule item num. It is required to match only first 10-char with the parameter passed i.e, S_POSONO and display only those datas.
The function module is as follows.....
Function :
CALL FUNCTION 'YFIIN_RETRIEVE_SOURCE_DATA'
EXPORTING
 LT_RANGE_BUKRS = S_BUKRS[]
 LT_RANGE_DOCNO = S_POSONO[]
 LT_RANGE_DOCDATE = S_DATUM[]
 LT_RANGE_CURRENCY = S_FCURR[]
TABLES
 IT_TEMEXPOSU = LT_TEMEXPOSU
EXCEPTIONS
 INVALID_SELECTION = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Source code inside function module:
SELECT * FROM ZFIGL_TEMEXPOSU INTO TABLE IT_TEMEXPOSU
 WHERE COMPANY_CODE IN LT_RANGE_BUKRS
 AND currency in LT_RANGE_CURRENCY
 and REFERENCE in LT_RANGE_DOCNO
 and doc_date in LT_RANGE_docdate.
IF SY-SUBRC = 0.
SELECT COMPANY_CODE ATTRIBUTE_01 REFERENCE CREATION_DATE FOREIGN_CURR
 FROM TEMT_RAWEXPOS APPENDING CORRESPONDING FIELDS OF
 TABLE IT_TEMEXPOSU WHERE COMPANY_CODE IN LT_RANGE_BUKRS
 AND REFERENCE in LT_RANGE_DOCNO
 AND CREATION_DATE IN LT_RANGE_DOCDATE
 AND FOREIGN_CURR IN LT_RANGE_CURRENCY.
 ENDIF.
Import Parameter of Function Modules :
LT_RANGE_BUKRS - type - BUKRS
LT_RANGE_DOCNO - type - EBELN
LT_RANGE_DOCDATE - type - DOKDATS
LT_RANGE_CURRENCY - type - WAERS
please help me to solve this problem..

Hi Ram Tej,
Try this.
First Read all the records without Checking REFERENCE field with LT_RANGE_DOCNO into an internal Tbale.
Then looping at that internal table delete records from the same internal table where REFERENCE(10) <> LT_RANGE_DOCNO.
Hope this may help ur requirement.
Award points if useful.

Checkbox as import parameter in function module

Hi all,
how to create a checkbox as import parameter in function module,
thnx in advance

?? Function modules don't have screens...they do have import, export parameters.
If you look at how "checkboxes" are stored in db tables, you'll see that the previous replies are precisely correct. A check box is a char1 field...it is on when 'X' (ABAP_TRUE) and off when blank (initial)....you would call your FM with an import field of type char1 set to 'X' or set to space, and handle accordingly in your FM code.
If you have a checkbox on a selection screen, then the value of that parameter is either 'X' or space, depending upon whether or not the user checked the box.

Table to find out the function modules used in a particular program

Hi,
Is there any standard table to find out the function modules used in a particular program?
Such as there is a table D010TAB to find out the tables used in a program .

Hello
There is no exist such table.
But try this snippet:
REPORT ZSEARCH.
PARAMETERS: P_NAME LIKE D010SINF-PROG.
DATA: PROGTXT(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: TMP(72) TYPE C OCCURS 0 WITH HEADER LINE.
DATA: FUNCT TYPE RS38L_FNAM OCCURS 0 WITH HEADER LINE.
DATA: INCL TYPE RSEUINC OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'RS_GET_ALL_INCLUDES'
     EXPORTING PROGRAM    = P_NAME
     TABLES    INCLUDETAB = INCL.
LOOP AT INCL.
READ REPORT INCL-MASTER INTO TMP.
APPEND LINES OF TMP TO PROGTXT.
REFRESH TMP.
ENDLOOP.
READ REPORT P_NAME INTO TMP.
APPEND LINES OF TMP TO PROGTXT.
LOOP AT PROGTXT.
IF PROGTXT CS 'CALL FUNCTION'.
    SEARCH PROGTXT FOR ''''.
    IF SY-SUBRC = 0.
      DO.
        SHIFT PROGTXT LEFT BY 1 PLACES.
        IF PROGTXT(1) = ''''.
          SHIFT PROGTXT LEFT BY 1 PLACES.
          DO.
            SHIFT PROGTXT RIGHT BY 1 PLACES.
            IF PROGTXT+71(1) = ''''.
              SHIFT PROGTXT RIGHT BY 1 PLACES.
              CONDENSE PROGTXT.
              FUNCT = PROGTXT. COLLECT FUNCT. EXIT.
            ENDIF.
          ENDDO.
          EXIT.
        ENDIF.
      ENDDO.
    ENDIF.
ENDIF.
ENDLOOP.
SORT FUNCT.
LOOP AT FUNCT.
WRITE: FUNCT. NEW-LINE.
ENDLOOP.

WS_FILENAME_GET is obsolete function module in ECC 6.0

Hi Guys,
The function module "WS_FILENAME_GET" was obsolete in ECC 6.0, could you please suggest me which is relevant function module in ECC 6.0.
Thanks,
Gourisankar.

Hello,
Take a look at class CL_GUI_FRONTEND_SERVICES.
Regards,
John.

Obsolete function module in ECC 6.0 - BAPI_COSTESTIMATE_CREATE_SPLIT

Hi Guys,
The above function module obsoleted in ECC 6.0, I need related function module in ECC 6.0.
Could you please suggest me, which is the related function module in ECC 6.0?
Please take a high priority. Advance thanks guys.
Thanks,
Gourisankar.

Hello,
Take a look at class CL_GUI_FRONTEND_SERVICES.
Regards,
John.

Add parameter in Function Module

hi all,
I'm trying to add a parameter to function module HRGPBS_HER_GET_SURNAME_NINO.
However, the system is telling me to carry out modification comparison first.
Can someone guide me on using SPAU or SE95, as I don't understand what to enter in the selection area?
thanks

If you go to transaction code: SPAU, you can find the item (program, function module, screen, etc) in question, open the tree to the lower levels. On the lower item, you can choose to save your changes or revert back to original.
The developers should be able to tell what has been changed. In most cases, we wanted to keep our changes with the exception of when a change was made and later a note was released to produce the same result or if new functionality is released related to the item in question.
Hope this helps.

How to pass internal table values to parameter

hi,
 how to pass internal table values to parameter in selection screen.if is it possible means please sent codeings.
thanks.
stalin.

hi,
tables : mara.
data : begin of itab_mara occurs 0,
 matnr like mara-matnr,
 ernam like mara-ernam,
 end of itab_mara.
selection-screen : begin of block blk1 with frame title text-001.
parameters : p_matnr like mara-matnr.
selection-screen : end of block blk1.
select matnr ernam from mara into corresponding fields of itab_mara
 where matnr = p_matnr.
loop at itab_mara.
write :/ itab_mara-matnr,
 itab_mara-ernam.
endloop.
<REMOVED BY MODERATOR>
Message was edited by:
 Alvaro Tejada Galindo

Function module in ECC 6.0

Hi Experts ,
I have an issue in using Function module in ECC 6.0 , while passing data in table parameter is showing an error as ' Table parameter is obselete'. Can u please suggest any other way of passing table in function module.
<removed_by_moderator>
Edited by: Julius Bussche on Oct 20, 2008 10:35 AM

use table types:
types: ty_struc type ...,
ty_tab type standard table of ty_struc.
data: it_tab type ty_tab.
call function ...
changing it_tab
Don't use TABLES parameters any more, they have implicit header lines, which is a no-no in ABAP Objects context.
Thomas

Absolete Function Modules for ECC 6.0

Hi guys,
iam doing upgrade project, i want know absolete for this function modules
CALL FUNCTION 'NAMETAB_GET'
EXPORTING
TABNAME = 'BKPF'
TABLES
NAMETAB = HNAMTAB
EXCEPTIONS
OTHERS = 0.
CALL FUNCTION 'WWW_USER_AUTH_MESSAG'
plz give me suggestion for me.

Hi Veera,
To find obsolete function modules in ECC 6.0.
The table is RODIR.
Go to SE11.
Give table name as RODIR.
click on display.
Then , in the selection criteria.......
For the field OBJECT TYPE give FUNC
and for OBSOLETE give 'X'
Execute and you will be able to see all the function modules which are obsolete.
Regards,
Hari Kiran

(internal) Tables obsolete as parameter in function modules in ECC 6.0

Similar Messages

Maybe you are looking for