International Address Gets Deleted in R/3

Hi,
we're facing an issue that "International Address" in R/3 Customer Master gets deleted each time we update "Communication Data" such as phone, email, fax in CRM Customer Master.
the program that cause the problem is LBUPA_INTERFACE_OUTBOUNDB26
we've been trying to find any SAP notes, but so far no luck.
any lead is really appreciated.
Thanks.

Hi Kevin,
We are having same issue..could you let me know what Sapnote you have implemented.
Thanks,
Siva

Similar Messages

Cisco ISE 1.1.4 Patch 7 (Internal Endpoint Mac Addresses Getting Disppeared)

Hi Folks,
I am having issue that mac addresses which we are trying to add under Internal Endpoint Group for MAB getting disappear automatically after few minutes. We tried multiple mac addresses but result same. We can see the mac address which we added earlier but new mac address getting disappear. Is there any limit to add mac address under Internal Endpoint. We have following licenses.
L-ISE-ADV-1K-M= Cisco ISE 1000 EndPoint Advanced + Base Migration License
Thanks

Tabish,
We'll update the latest patch and then look for the work around from any one of our Cisco experts

Unable to delete internal Address via EDIT INTERNAL ADDRESSES option

Friends,
When I login as administrator, the EDIT INTERNAL Addresses option allow me to Add new address and change existing address. but there is no option avialable to delete internal address.
Can any one tell me how to delete internal address from WEB GUI screens.
Alternate way is to delete the internal address from SAP GUI business partner transaction. but i do not want user to access SAP GUI client.
is it an authorization problem?
Regards,
Sandeep Parab

Hi Sandeep
You are correct. no way to delete address number via web.
if you want to delete adress no. eye on adrc table.
if you want permanently delete all adress related to BP .
one bp is related to more adress number.
bupa_test_delete - so if you delete one BP and may delete all adresses it linked with.
regards
muthu

HT201269 I am trying to save memory on my iPhone 4S/ ios6. Can I back up all photos to icloud and the external hard disk I normally use for photos? If I then delete photos from the iPhone do the get deleted on iCloud?

I am trying to save memory on my iPhone 4S/ ios6.
1) Can I back up all photos to icloud and the external hard disk I normally use for photos? If I then delete photos from the iPhone do the get deleted on iCloud?
2) Can I back up the newsstand to iCloud and save memory on the iPhone?
3) Can I back up the bookshelf to icloud and save memory on the iPhone?

1. What format is the external drive? It sounds like it's ina format that Macs can't write to. Is it a NAS or NTFS?
2. Easiest thing: just move your iPhoto Library to the external
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Isync Motorola Razver and Address Boks delete all contacts

Mu first sync betweem my cellphone and my macbook was fine and I transfer all my contacts from the phone to Adress Book. In the second time that I tried, I lost all the contacts in both Address Booka dn cellphone. How recover that?

Paul O' wrote:
Address Book is syncing correctly now. Initially I was getting many duplicates. I took deleted all the contacts in Address Book, deleted the Address Book folder under Application Support, and then resynced with Google. It's been solid ever since. Could I have deleted something that was needed to make Address Book and Mail work together?
no. Mail uses the address book database directly. the one that I had you delete. it was rebuilt from metadata on restart. did you quit both Mail and address book when you did it? I would still strongly suspect sync data being at fault. first try this again. quit both Mail and address book and delete the AB database file again along with homedirectory/library/Caches/com.apple.AddressBook
then start address bok and Mail. alos, do you have any mail or address book plugins? have you installed ANY kind of new software recently?

I have an apple id but the email address that they send a reply to is one I no longer use. How do I change this in my profile? It does not show up as an add'l email address to delete

I have an apple id but the email address that they send a reply to is one I no longer use. How do I change this in my profile? It does not show up as an add'l email address to delete

"The reply" as in the Rescue email to reset your Security Questions? If so, then you will have to contact iTunes Support directly to get them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

Values in table control getting deleted on vertical scrolling

I have a table control which is associated with an internal table.Whenever I scroll down the values in the table control gets deleted.
I tried solving the issue of scrolling by keeping another internal table as reference and syncing the values to my internal table; but after doing that whatever changes I make after scrolling is not reflected in the internal table.I'm using a db structure with abt 130 fields for my table control and there are no fields defined as primary keys.I tried using the modify statement but it's giving sy-subrc = 4 everytime.
Could anyone suggest a solution?

Debugging will solve your problem.
The solution for this question is /h -> hit scroll button

How do you get deleted data from the app Tote M'Notes back on iPad ????

How do I get deleted data from app Tote M'Notes back???...Not displaying in my notebook anymore...also how do i retrieve data from apps stored in Icloud?

Why don't you use the fully-qualified-domain-name (FQDN) of your GW and perform a re-direct to this ?
This should be known (and everytime the same), addtionally you won't have any problems if there's any load balancer in between or in fron of the GWs.
Secondly you'll have problems to get the IP -address if there's any proxy server involved.
/ulf

Import and export of international address

Hello all,
I need help with the international address version. I want to import greek data to our system using the ELM, because of the duplicate check already in place in our ELM.
Has anybody experience with that?
Then I also need to export the international address again via a campaign with the channel data export. Is there an easy way to achieve this?
Or is it possible to configure the serach result list for accounts/contact persons that I can see and export the information there directly?
Thanks a lot for your help!
Regards Anne

Hi,
Right click on the DCs which you want to get in the IDE and select Create Inactive Project.
If it prompts for the dependencies select them.
Once this is done u will be able to see the project in the WD perspective.
Now right click on the DC and select Development Component -> Build .
then Development Component -> Deploy.
If its there are any errors related with hard references deploy those DCs first and try.
Regards
Ayyapparaj.

Internal Addresses - BP Address for Org Unit representing a Company Code

Dear All
We are on SRM Server 5.5 and are experiencing an annoying issue. It might be standard, but I do not recall having the problem earlier on, at other customers.
The internal address of BP ## representing a company code, automatically gets Name1 filled out with the Object Name in the Org structure (Typically Company name).
This is ok, but what we see is that Name 2 is also filled out with this name. This gives us an issue when printing the PO in the backend system (classic scenario) as the PO will have both Name1 and Name2 printed as delivery address.
We have tried to change the address in BP, which works ok - until someone makes a change in the org structure, then the BP address is updated again!
Can anyone enlighten me whether this is standard functionality or what? And if is there anyway of mitigating this behavior?
Best Regards, and thanks in advance
;O)
Maria

Dear all,
five years later, but we have currently the same problem as Maria described.
In my company, we are filling the fields SHORT and STEXT of the structure P1000 (transaction PPOMA_BBP) with more or less technical names or terms.
So far, that was working very well.
But in the future, we need to use the fields NAME_ORG1 and NAME_ORG2 of the transparent table BUT000 as the first two fields of the delivery address.
That leads to the situation that technical term/names are used in the delivery address, which is not realy beautiful.
We cannot enter the correct delivery data into the fields SHORT and STEXT in the PPOMA_BBP, because the fields have not enough spaces.
Do you have any ideas how we can solve this issue?
Kind regards
Ignatius

2 BM Servers Natting to Same Internal Address

Can this be done? I'm changing my BM server that does natting, to a different server on a different external subnet. To test it's functionality, without downing the old server, I've set natting up the same on the new as the old. This means that during the testing phase, I've got 2 different external addresses natted to the same internal address. I've been having some erratic problems with this. Could it be that this is causing a conflict?

What you can do is to set up a second BM server in parallel to the
first one, (and eventually perhaps cluster the two) for testing.
Make all addresses you point to secondary addresses (except VPN) on the
old server. This means the internal proxy address needs to be a
secondary address, which can be done by readdressing the private side
of the BM server and adding the old address back as a secondary.
Once the proxy address is a secondary, it becomes much more portable.
You would have one or two NCF files to add the secondary addresses as
needed. (Do not add them in inetcfg). And another NCF to delete the
secondaries.
Unload proxy on the old server, then load it on the new one (once it
has been configured with old server addresses). Unload secondaries on
old server (with NCF) and add to new one (with NCF file) - NAT's and
filtering need to be set up in advance. All your traffic will move to
the new server as long as you avoided address duplication. You test
and see how things work.
Reverse the process to go back to the old server.
This is what I call a 'poor man's cluster', as you are doing manually
what simple cluster scripts would do (unload proxy, add addresses...)
Process is documented in my BMgr book - see URL below.
Craig Johnson
Novell Knowledge Partner
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

If I want to change my Apple ID will my apps from the previous Apple ID get deleted?

If I want to change my Apple ID will my apps from the previous Apple ID get deleted?

No, it will just ask you for the password to your old Apple ID to update the apps in the future. Unless your talking about simply changing the email address associated with your Apple ID account.

International address printout in INVOICE

Dear All,
I need to get the international address maintained for different languages in customer master to pass this information to SAPscript to print out invoices. At present it is getting ADRRESS FOR ENGLISH as follows;
TITLE    &VBDKR-ANRED_WE&
NAME     &VBDKR-NAME1_WE&, &VBDKR-NAME2_WE&, &VBDKR-NAME3_WE&, &VBDKR- >
STREET   &VBDKR-STRAS_WE&
POBOX    &VBDKR-PFACH_WE& CODE &VBDKR-PSTL2_WE& CITY &VBDKR-PFORT_WE&
POSTCODE &VBDKR-PSTLZ_WE&
REGION   &VBDKR-REGIO_WE&
CITY     &VBDKR-ORT01_WE&, &VBDKR-ORT02_WE&
COUNTRY &VBDKR-LAND1_WE&
FROMCOUNTRY &ADRC-COUNTRY&
ADDRESSNUMBER &SHIPADDR_NUMBER&
Could you please tell me how to read and get a address for customer maintained in CHINESE/JAPAN LANGUAGE under INTERNAITONAL versions.
I would appreciate your time and help in this regard.
Many thanks in advance.
cheers
good guy

hi
In the <b>Table ADRC</b> give the address number and<b> NATION =</b> I means english in international vertion, if you want chainees give Nation = 'C' then it is chainees vertion.
international vertion id are examples like
A      Arabic
B      Hebrew
C      Chinese
G      Greek
H      Hangul
I      International
K      Kanji
M      Chinese trad.
N      Katakana
R      Cyrillic
T      Thai
all the veritions in adrc are international verions
Please let me know u r problem is solved or not

International Addresses support in I-Supplier Portal

Hello:
Has anyone been able to setup international address support in I-Supplier Portal ?
When supplier enters address, it asks for County and then there is no validation at state, city, zip code level.
So Supplier can enter: County: United States .... and then State, City, Zip codes are all free-form text fields ...
Any ideas how to get validation for these fields ..
Yesh

Hi
Has anybody knows how to limit file type attachments in I-Supplier Portal.
We do not want the suppliers to be uploading jpeg, mp3 files .....
Yesh

When I delete emails , they just get deleted and do not get moved to trash

When I delete an email , it just gets deleted and does not get moved to trash. Its pretty frustrating as I regularly hit the delete by mistake and I lose the email because it just does not get moved to trash .I have checked the preference to find some setting that might cause this ( like delete trash immediately) in mail preferences to no avail. I also have ran file system check and cleaned and repaired the Mac-HD in hope of solving the problem to no avail. This has been happening only for a few days. The funny thing is , I also noticed that a folder I was trying to copy from My main HD to a secondary one ( not in mail but just on the computer), suddenly disappeared and I could not locate it . Am I going crazy? Someone please help.

Hi hadjibaba. You’re welcome.
Report the names of the files and folders present at the first level of the ~/Library/Mail/POP-username@mailserver/ account folder in the Finder.
In order to post the exact file names and avoid typing mistakes, proceed as follows. In the Finder, go to ~/Library/Mail/POP-username@mailserver/. With that folder open, if you’re looking at it in View > as List mode, first collapse any expanded folders so that the Finder only shows the files and folders at the first level. Now, do Edit > Select All (⌘A), then Edit > Copy (⌘C), and paste it in your reply to this post.
BTW, if you’re running Mac OS X 10.3 (Panther), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Mac OS X 10.3 & earlier forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

International Address Gets Deleted in R/3

Similar Messages

Maybe you are looking for