International SSRS report printing for both A4 and Letter

I've been reading a few articles on the net about making reports either A4 or Letter and I am aware of how to change the layout of the page to be specific for either
The problem we have is that we have some users that use A4 paper, and other users that use Letter size paper.
We would ideally like the user to press the print button from the browser window (note not exported to PDF) and for the report to be printed off on their favourite printer
We have modified the layout to be the lowerst common denominator size (210mm x 279mm).  When we print to our printer which uses A4 paper, it errors because the paper size is odd and needs confirmation to use A4 instead.  I am making the assumption
that using a printer with Letter size has the same problem.
We do not want our users to have to deal with errors on their printer every time they try to print a report, it doesn't look good.  We don't want to write 2 versions of each of our reports as that will be time consuming and a maintenance nightmare
Has anyone managed to make SSRS reports printer agnostic or at least be able to print out on either A4 or Letter without additional intervention on the printer?
Tony

Hi Tony,
What version of SSRS are you using? Are you seeing this from the Report Viewer control or Report Manager?
In my Report Manager, when I try to print a report (SSRS 2008 R2), the Layout defaults to Letter. When I look at the report (RDL) property in BIDS, the PageSize property is set to 8.5in (Width), 11in (Height), which refers to PageWidth and PageHeight respectively.
The following blog explains these properties:
http://blogs.msdn.com/b/bwelcker/archive/2005/08/19/alien-lanes-_2800_logical-and-physical-pagination-rules_2900_.aspx
In SSRS 2005, for the Report Viewer control, due to a VS 2005 issue, we had a situation where it would not allow custom paper size. By modifying the report page size to the exact Letter size (279.4mm = 11 inches), for example, we would be able to see the
Letter size in that situation. This should be fixed on and after SSRS 2005 SP2.
In general, after rendering a report, Reporting Services sends the height and width information to the printer driver when we try to print a report, which selects the appropriate paper type based on the report size.
In my test, when I tried to print, it chose Letter with Portrait Orientation. I was able to change it to A5 from the Print Dialog and was able to print in both ways (A5/Letter) without any error message.
Thanks,
Cathy Miller
Microsoft Online Community Support

Similar Messages

  • Need a printer for both Tiger and Classic

    I posted a question before (July 13) about trying to get my HP psc 1315 All-in-One to print from Classic applications when running Classic in OS 10.4.7 on my new pre-pentium G5. Now I just want to know if anyone out there knows if there is any All-in-One unit that I can buy that will print in both Classic and Tiger.
    The problem seems to be that the new Mac is emulating OS 9.2 rather than just running 9.2 as a background system. Because of that, printer drivers will not mount in Classic -- at least that's what HP and Epson and Apple all tell me.
    So if anyone can tell me of a reasonably priced All-in-One that will do what I want, I'd be extremely grateful.
    S/R
    G5   Mac OS X (10.4.7)   Pre-pentium so it supports Classic

    If you don't want to buy any more hardware and have a printer connected to a desk top or laptop computer you could try printjinni. You would need to share the printer to make it available to the app (locate the printer in printers & faxes right click the printer and select share from the content menu)

  • Creating one design for both A4 and Letter Sizes

    Hi There!
    I'm new to the forum. I've been tasked with creating individual catalogue pages for a global company. Some divisions in the US use 'Letter' and here in the UK we use 'A4'.
    I was wondering if there's a way of creating a one page design - say in A4 - that when exported as PDF will print to both page sizes? I wondered if I could set the print settings in advance so the page automatically prints to fit page? Unfortunately haven't been able to find any advice on this.
    Any other suggestions would be very much appreciated.
    Hayley

    The answer is that the same page can be printed, scaled, in both formats, but it won't be pretty if you do it that way. In CS6 you can create an Alternate Layout in the same document so that you have both page sizes and can adjust the layout to fit the differnt shapes, then choose which to output. You can use Linked Stories so that you only need to edit one and the other will update.

  • Wireless Printing for Both Windows and Mac

    I can now print wirelessly from my windows PC, but not from a secondary PC and a Mac Laptop. Help Please!

    What brand/model router?  What operating systems?  Did you get the latest software for your printer from the "Support & Driver" link at the top of this page?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • ABAP List formats to cater for both A4 and Letter environments

    We have an environment where now both Letter and A4 stationery is used.  Where can we get ABAP list formats for the Letter stationery and should we define them separately e.g. X_65_80 and X_65_80_LTR?
    Secondly what is the transaction path for copying and modifying ABAP list formats?

    Hi
      You cann;t change the font size thru report.
    Go for either Script/smartform for the same.
    Regards,
    Sreeram

  • How can I print BOTH legal and letter on my duel tray printer????

    How can I print BOTH legal and letter on my duel tray printer from my mac? on a pc you can choose "print according to pdf size" and the mixed document will print in both legal and letter auto-selecting the printer tray.

    Hello CKAY,
    My old printer does not show 8x10 either.
    In the printing preferences under the Paper/Quality tab, do you see a "Custom" option or button? There should be one in there somewhere in your preferences.
    Click on that and create a custom size of 8 in for the width and 10 in for the length. Be sure to "Name" it 8x10 Photo and click ok.
    Now give it whatever attributes you want under the other tabs and click Apply and OK (or just OK).
    Close out the printer and open it again and the new size you created should show in the list.

  • Output determination and Printer determination for  both PO and GR

    Dear all,
    Can anyone please help me in congiguring the output determination and printer determination for  both PO and GR. please give me detailed configuration including the paths as i am stuck with the configuration.
    Thanks & Warm Regards
    Somashekar Anand

    hi Somashekar
    follow he steps
    Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    *4. Message Determination Schemas*
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
    Output of GR
    After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
    Reward points if helpful
    Thanks and regards
    Ravikant Dewangan

  • Printing from Airport Extreme for both Mac and PC

    I have both a mac and a PC. Both are connected to the internet using the Airport Extreme. Here's my problem. Currently I can only print from the Mac but not the PC. I was told that I would be using the airport extreme I would be able to use one printer for both computers. The printer I am using is an HP Office Jet 6310, which is compatible with both a Mac and a PC. Can anyone help me?

    I recently purchased a Canon Pixma MP610 and it is connected to an AE. My Macbook prints fine to it. My PC laptop doesn't. I used to have a Canon Pixma 1600 that printed fine for both computers (I used iFelix's 1004.html steps to install for the PC)
    I have tried the Add Printer on the PC using the same 1004.html steps with no luck. I have also used the 1008.html steps to install using the Bonjour Wizard with no luck.
    When I say no luck, I mean it sees the printer, it has the proper drivers, but when I print a test page, it can't connect.
    I Add a Printer and test and it fails, I then delete the printer and install it a different way. The weird thing is hours later, the test page will be there sitting on my printer. But I don't know why it took so long or which printer install method worked.
    I have now installed 4-5 different printers and hit Test Page on all of them. I named each printer something different so in case the Test page comes out, I'll know which printer works.
    I'm almost there I feel, but just can't get it.
    Any suggestions iFelix or anyone else?

  • Use Sign.xml and Encrypt.xml for both request AND response within WSDL?

    Hi,
    ALSB: 2.6
    I was wandering if it's possible to use abstract outof the box WS-Policy file within WSDL file to specify encryption
    (Encrypt.xml) and digital signature(Sign.xml) with X509 for both request and response???
    So far, it only works for either request or response BUT not both. i.e. within WSDL file
    <!-- following WSDL works for encrypting and signing request with X509 in test console -->.....
    <wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
        <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
        <wsdl:operation name="Message">
                <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                              <wsdl:input>
                               <!-- WS-Policy file applied here -->
                             <wsp:Policy>
                                            <wsp:PolicyReference URI="policy:Sign.xml"/>
                                            <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                       </wsp:Policy>
                                     <soap:body use="literal" />
                               </wsdl:input>
                             <wsdl:output>
                                  <soap:body use="literal" />
                               </wsdl:output>
        </wsdl:operation>
      </wsdl:binding>
               Or
    <!-- following WSDL works for encrypting and signing response with X509 in test console -->
    <wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
        <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
        <wsdl:operation name="Message">
                <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                              <wsdl:input>
                                     <soap:body use="literal" />
                               </wsdl:input>
                             <wsdl:output>
                                       <!-- WS-Policy file applied here -->
                                       <wsp:Policy>
                                            <wsp:PolicyReference URI="policy:Sign.xml"/>
                                            <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                       </wsp:Policy>
                                  <soap:body use="literal" />
                               </wsdl:output>
        </wsdl:operation>
      </wsdl:binding>
    But not both
    <!-- following WSDL doesn't work for encrypting and signing both response and request with X509 in test console -->
    <wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
        <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
        <wsdl:operation name="Message">
                <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                              <wsdl:input>
                                        <!-- WS-Policy file applied here -->
                                       <wsp:Policy>
                                            <wsp:PolicyReference URI="policy:Sign.xml"/>
                                            <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                       </wsp:Policy>
                                     <soap:body use="literal" />
                               </wsdl:input>
                             <wsdl:output>
                                       <!-- WS-Policy file applied here -->
                                       <wsp:Policy>
                                            <wsp:PolicyReference URI="policy:Sign.xml"/>
                                            <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                       </wsp:Policy>
                                  <soap:body use="literal" />
                               </wsdl:output>
        </wsdl:operation>
      </wsdl:binding>
    ...      Instead, I got error message like
    <15/01/2008 10:15:04 AM NZDT> <Error> <ALSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: Fault
    , message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fdb, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: Message]
    --- Error message:
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault><faultcode>soapenv:Server</faultcode>
    <faultstring>Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3</faultstring></soapenv:Fa
    ult></soapenv:Body></soapenv:Envelope>
    weblogic.xml.crypto.wss.WSSecurityException: Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#
    X509v3
    at weblogic.xml.crypto.wss.SecurityBuilderImpl.addEncryption(SecurityBuilderImpl.java:308)
    at weblogic.wsee.security.wss.SecurityPolicyDriver.processConfidentiality(SecurityPolicyDriver.java:280)
    at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:75)
    at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
    at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:86)
    Truncated. see log file for complete stacktrace
    >
    <15/01/2008 10:15:24 AM NZDT> <Error> <com.bea.weblogic.kernel> <000000> <Failed to build CertPath
    java.security.cert.CertPathBuilderException: [Security:090603]The certificate chain is invalid because it could not be completed. The trusted CAs did not inclu
    de CN=x509,OU=x509,O=x509,L=Wellington,ST=Wellington,C=NZ.
    at weblogic.security.providers.pk.WebLogicCertPathProviderRuntimeImpl$JDKCertPathBuilder.engineBuild(WebLogicCertPathProviderRuntimeImpl.java:669)
    at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:194)
    at com.bea.common.security.internal.legacy.service.CertPathBuilderImpl$CertPathBuilderProviderImpl.build(CertPathBuilderImpl.java:67)
    at com.bea.common.security.internal.service.CertPathBuilderServiceImpl.build(CertPathBuilderServiceImpl.java:86)
    at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
            Truncated. see log file for complete stacktrace
    >
    <15/01/2008 10:15:24 AM NZDT> <Error> <ALSB Security> <BEA-387022> <An error ocurred during web service security inbound request processing [error-code: Fault,
    message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fd8, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: null]
    --- Error message:
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault xmlns:wsse="http://docs.oasis-open.or
    g/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><faultcode>wsse:InvalidSecurityToken</faultcode><faultstring>Security token failed to validate. weblo
    gic.xml.crypto.wss.SecurityTokenValidateResult@3c5347b[status: false][msg [
      Version: V1
      Subject: CN=x509, OU=x509, O=x509, L=Wellington, ST=Wellington, C=NZ
      Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
      Key:  Sun RSA public key, 1024 bits
      modulus: 13052787793731294943682394984664645854838424340012907077330623....
      The 'System Error Handler' from 'Invocation Trace' in ALSB test console is something like
    [pre]     
    $fault:
    <con:fault xmlns:con="http://www.bea.com/wli/sb/context">
         <con:errorCode>BEA-386201</con:errorCode>
         <con:reason>
              A web service security fault
              occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Failed
              to get token for tokenType:
              http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3]
         </con:reason>
         <con:details>
              <err:WebServiceSecurityFault
                   xmlns:err="http://www.bea.com/wli/sb/errors">
                   <err:faultcode
                        xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
                        soapenv:Server
                   </err:faultcode>
                   <err:faultstring>
                        Failed to get token for tokenType:
                        http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3
                   </err:faultstring>
              </err:WebServiceSecurityFault>
         </con:details>
         <con:location>
              <con:path>response-pipeline</con:path>
         </con:location>
    </con:fault>
    So is this a feature not supported in ALSB 2.6 yet or am I missing something dead simple?
    Thanks in advance
    Sam

    Instead of specifying policies for input and output separately you could place the policy reference only once in the operation element. Maybe will this solve your problem...
    http://e-docs.bea.com/alsb/docs26/security/ws_policy.html#wp1061166

  • PGI for both main and sub items (Sales BOM)

    Hello SD friends,
    I'm trying to map some BOM scenario.
    Only main item should be relevant for princing.
    Here's what I've done :
    1. Create sales BOM via CS01
    2. Maintain item category group ERLA for main item and NORM for sub item MM01
    3. Maintain item category TAQ for main item and TAE for sub item VOV4
    When I wanna do PGI, system creates material document only for main item.
    Which means that PGI has not been done for sub items.
    Is there any way to make PGI possible for both main and sub items ??
    Regards,
    Bahia.

    Can you clear, that why you want to issue both Main item/Sub Item, where your pricing is @ main item level.
    in Main item level Pricing, Main item itself includes components. Once you issue the main item. from Inventory this main item wil be reduced.
    Eg:  In Case of Main Item- Computer (Assume Components - Monitor , Keyboard , CPU & Mouse)
    Price for Computer - $1200.   Component prices individually- $300 , $100, $700, $100 - These prices applicable only when you sell as BOM at Subitem level Pricing Or Seperately )-
    In SO: - Order Computer (System explodes Components to verify,which are the subitems consists in Main Item)
      DEL:-  Components will be copied in Delivery , but not for dispatch (Sch Line Cat:CT has these controls)
    Inv: Only Main item will be displayed for print.
    NOTE:  for your requirement, you can change the Schline Category from CT - CN- which is relevant for delivery with movement type i601 -in SO. Then you can dispatch components & these components will not copied into Invoice ,as they are not relevant for billing.
    If you want CN has to determined automatically, maintain Schline Category determination accordingly.
    Hope it helps,
    Any info, please revert

  • Can you print using both USB and Wireless on HP M175nw?

    I am having a problem with my new LaserJet 100 colorMFP M175nw. When I initially set it up with Setup wizard, I selected the "USB" option, since that was how my old printer was hooked up to the computer. That worked fine and the printer works perfectly with my desktop. Now I can't figure out how to also set up the printer to be used wirelessly. I specifically bought this printer because I wanted to be able to Airprint from an ipad. I've tried several of the fixes listed on this website, but I'm not able to get a list of wireless networks to appear on the printer's menu. I am using a Linksys wireless G router, which is hardwired to my desktop, but which I use to wirelessly access the internet with my laptop and ipad.
    What is the best way to be able to use the printer with my both my desktop (non-wireless), laptop, and ipad (both wireless)? Can I leave the printer hardwired to my desktop with a USB AND connect the other devices wirelessly? If so, what is the best way for me to connect the printer to my router - wirelessly or wired? What steps do I need to take to do that and get the printer connected?
    Thanks for your help!

    Hi,
    Before Christmas 2011, I ran few tests and I've posted elsewhere on this forum. My printer is a different model but I believe same technology. My tests indicated we can connect printer using BOTH wireless and USB. Printer will show busy/not available during direct print (ie USB) but it knows job(s) is/are on the queue and print after that.
    One thing I could not test successfully: scan and print at the same time.
    Regards. 
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Updated 2.3.3 for both x10i and x10a (ALL KITS)

    Updated 2.3.3 for both x10i and x10a (ALL KITS)
    http://www.topsony.com/forum/local_links.php?catid=4556
    download FlashTool
    http://forum.xda-developers.com/showthread.php?t=920746
    or
    http://androxyde.github.com/Flashtool/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)
    Solved!
    Go to Solution.

    this is how to add more Internal Memory it's a long process but its worth it
    1) backup everything (Check above)
    2) backup your SD card
    on your PC
    1) open any folder -> click on tools -> properties -> view -> show hidden files
    2) mount the SD card, go to your SD card, press Ctrl + A then Ctrl C, on your desktop create a new folder, open it, then press CTRL + V
    now this is where it gets AWEOME-ER
    Guide to using Link2SD on your Xperia smartphone
    This guide may seem lengthy, but trust us when we say it is straightforward. All steps have been documented which makes it look daunting. Read each section carefully and follow the steps outlined to install Link2SD.
    1. PREPARATION
    Please make sure you have completed all of the following before starting the tutorial.
    On your PC:
    – Install the necessary drivers for your Xperia smartphone onto your PC/laptop. The easiest way to do this is to ensure that Sony Ericsson PC Companion is installed on your PC. Once installed, connect your phone to complete the process.
    – Download and install MiniTool Partition Wizard onto your PC or laptop.
    On your Xperia:
    – Enable USB de-bugging mode: Setting –> Applications –> Development –> Tick ‘USB debugging’
    – Enable the ability to install unknown apps: Setting –> Applications –> Tick ‘Unknown sources’
    – Install Link2SD from Android Market onto your Xperia smartphone. It is a free download.
    2. ROOT
    3. BACKUP MEMORY CARD
    As we will be creating a partition on your microSD memory card, make sure you create a backup just in case anything goes wrong.
    a) Create a new folder on your PC and name it anything you want, such as ‘SD_Backup’
    b) Connect your phone to the PC, navigate to your memory card and copy the contents to the backup folder.
    4. CREATE SECONDARY PARTITION
    You now need to create a secondary partition on your microSD memory card that will enable you to use Link2SD.
    Note: We will use MiniTool Partition Wizard to create a secondary partition on your microSD card. This partition can be ext2, ext3, ext4 or FAT32. We will use FAT32 as it is supported on all phones and should lead to less troubleshooting later. You can use any partition manager of your choosing, but the steps below guide you through MiniTool Partition Wizard.
    There is no need to wipe your memory card when going through this process, just ensure you have at least 0.5GB to 1.0GB of free space to make it worthwhile. You also do not need to use a microSD card adaptor as the process below creates the partition whilst the phone is connected to your PC.
    a) Connect your handset to the PC via USB and then launch MiniTool. You should see the details pop up under ‘Disk 2′.
    b) Click on the memory card under Disk 2 in MiniTool and then in the left pane, press ‘Move/Resize Partition’. On the blue bar under ‘Size and Location’, move the right arrow towards the left to create the size of the secondary partition desired. In the example below we created a secondary partition with 1018.63MB of space. This value can also be typed in manually in ‘Unallocate Space After’.
    c) Once this is done you should see that your memory card is now split into two partitions under Disk 2 of MiniTool. Right click this new partition and then press ‘Create’.
    If you see this pop-up below, just press ‘Yes’ to continue.
    d) You should then see this ‘Create New Partition’ window. Under ‘Create As’ click Primary and then under ‘File System’ click FAT32. Leave the cluster size as default and you can assign whichever drive letter you want. Once finished press OK.
    e) This should bring you back to the main MiniTool screen. Now hit the ‘Apply’ button on the top-left of the screen, denoted by a tick symbol.
    This will bring up another pop-up window and will take several minutes to both resize and create the secondary partition.
    If successful, you should see message below. Congratulations your card is ready to use in conjunction with Link2SD.
    5. LINK2SD
    This application makes it easy for users with root privileges on their phone to move applications to the SD card.
    a) Open the Link2SD app on your phone. You should be greeted with the following menu, check the FAT32 option and click OK.
    You will then see the Superuser Request, click ‘Allow’.
    Once you see the following message, restart your phone. The app should now be ready to use.
    b) To make sure everything is installed correctly. Click the Menu button and go to ‘Storage Info’. This will show you the internal memory and your two partitions on the memory card. In our case, you can see that the second partition has 1GB free.
    c) Now you need to move the apps of your choice to the memory card. Click the Menu button and press ‘Multi-select’.
    Choose which apps you want to move by clicking the tick box next to the app. System apps are greyed out and cannot be selected. Link2SD can only move apps that are already on the internal memory. If you have apps already on your SD card, you will need to move them back to the internal memory before you can link them with Link2SD.
    If you want to move all of your apps, pressing the menu button will bring up another menu allowing you to do this.
    d) Once you have chosen which apps you want to move, you then need to hit the menu button and press ‘Actions’, which will bring up the following menu. Press ‘Create Link’.
    Leave all three check boxes ticked and press OK. Link2SD will now do its work and move/link the selected apps to your memory card.
    Once finished, you should see that the apps you have moved have ‘Linked -> SD Card’ in red font in the Link2SD app list. Reboot your phone.
    e) Congratulations your phone is now using Link2SD! You should now go to Settings by pressing the menu button and configure how you would like Link2SD to work. The main decision here is whether you want to Auto Link newly installed apps to the memory card. Given that you’ve gone through the hassle of installing Link2SD we suggest you enable Auto Link and make worrying about your internal memory a thing of the past.
    Special Thanx to the Xperiablog
    http://www.xperiablog.net/2011/12/12/link2sd-guide-never-worry-about-internal-memory-limits-again/

  • I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

    I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
    Thanks

    You are mixing up a couple of things here.
    The TC drive cannot be partitioned without removing it.. did you do that?
    If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
    You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
    There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
    Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
    Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
    You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

  • I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Element

    I have Photoshop Elements 12 for both PC and Mac (I use both). I have a new camera, Nikon D810. I downloaded the latest version of Camera Raw, 8.8. My D810 is listed as a supported camera model. However, when I try to open a raw photo in Photoshop Elements, I keep getting the message "Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. I have tried reinstalling Camera Raw many times, and have tried to open many different raw files in Elements, and still get the same error message. Please help.

    How did you try to install ACR 8.8.  The only way I know of that works with Elements is to use the Updates Choice on the Help menu.
    There are two charts supplied by Adobe that explain your RAW dilemma.  This one tells you what your camera needs:  http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html   This one tells you what version of software you need:  http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    In your case, the Nikon D810 needs Adobe Camera Raw (ACR) 8.6 or Lightroom 5.6.  (Congratulations on buying a new camera!)
    To get to that level with Photoshop Elements, you will need to replace your Photoshop Elements 12 with version 13.   Adobe caps ACR updates on version 12 at 8.5.
    The most convenient way to get around it without spending any money is to use the FREE from Adobe DNG Converter.  Download and install it from here for FREE:  http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5855&fileID=5890  Once it is installed you can convert your D810 raw files to an Adobe RAW version with the .DNG file extension that most, if not all, versions of the various Adobe software programs can use.  That includes old versions of Photoshop, Elements and Lightroom.  DNG converter can be used as the tool to move your files from your memory card to your computer, is efficient, will convert in batches and is completely lossless.  There is no risk of any image quality degradation or RAW functionality.

  • HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

    I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

    Hi Jamesdwills,
    Welcome to the Support Communities!
    If you are using the same Apple ID on both devices, the Game Center profile should be the same.
    Check out this information from the iPad User Guide.  Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
    Using Game Center
    http://support.apple.com/kb/ht4314
    Game Center settings - iPad User Guide
    http://help.apple.com/ipad/7/#/iPad9a13d039
    Game Center settings
    Go to Settings > Game Center, where you can:
    Sign out (tap your Apple ID)
    Allow invites
    Let nearby players find you
    Edit your Game Center profile (tap your nickname)
    Get friend recommendations from Contacts or Facebook
    Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
    Change restrictions for Game Center. Go to Settings > General > Restrictions.
    Cheers,
    - Judy

Maybe you are looking for