Internet Application Downloads and Inability to View Them

When trying to download applications from the internet, the iPhone allows the process to occur and the icon appears on the phone; however, when I try to access the icon on the phone, the initial page of the application pops up and then immediately disappears. Any idea why the phone is doing this?  It's the first time I've attempted to download applications - I'm one of those people who use the phone as a phone only...Help...
Also, how do I find out what iOS version I'm currently using.  The information on the web is not correct - I cannot access it through the Settings > General button.

First, here's the version information.  If you cannot find what version of iOS you are using at Settings > General, then you could certainly find it by attaching your iPhone to your computer's iTunes.  It will appear on the "Summary" page showing your iPhone's info when your iPhone is plugged in.  Assuming you have the latest iTunes (11.0.1), you should then upgrade your iPhone's software as it is undoubtedly quite old.
Regading the download behavior, there are three likely possible causes:
1.  Very old iOS software (likely);
2.  Restrictions (check Settings > General > Restrictions); or
3.  The application cannot be run on an iPhone (e.g., apps that require Adobe Flash).

Similar Messages

  • I am trying to delete duplicate content in my iTunes library. I have stopped the download and I can see them on VIEW Displaying Duplicates, but cannot delete them with the Delete button. Can anyone assist?

    I am trying to delete duplicate content in my iTunes library. I have stopped the download and I can see them on VIEW>Displaying Duplicates, but cannot delete them with the Delete button. Can anyone assist?

    If you've paused the download (they are partially greyed out on the duplicates screen ?) then you will need to delete them from download window, you can't (as far as I know) delete partially downloaded items from that screen. When you have items downloading, or downloads that are paused, you should have a downward pointing arrow at the top right of the iTunes screen
    If you click that arrow you should get a popup window with the items that are downloading/paused - and you should be able to select and delete them (or resume their download) from there.

  • I cannot view pdf files on Safari, instead they download and open in viewer. How do I change this?

    Does anyone have a solution for this???
    "I cannot view pdf files on Safari, instead they download and open in viewer. How do I change this?"

    Back up all data. Please read this whole message before doing anything, so you'll know what to expect.
    Open Safari's preferences dialog and make notes of everything you would need to recreate the basic settings, such as your home page. That includes the settings of Safari extensions, if any are installed.
    Triple-click the line below to select it, then copy the selected text to the Clipboard (command-C):
    ~/Library/Preferences/com.apple.Safari.plist
    Quit Safari. In the Finder, select
    Go ▹ Go to Folder
    from the menu bar. Paste (command-V) into the box that opens and press return. A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open.
    Launch Safari. Its settings will have reverted to what they were they first time you launched it. Your bookmarks, history, and AutoFill data will be preserved.
    Test. If Safari now works as expected, recreate its settings and delete the file you moved to the Desktop. Otherwise, quit Safari again and put the file you moved back where it was, overwriting the newer one created in its place. Post your results.

  • MII Reports - How and where to view them

    Hi Gurus,
    Few  quick questions on MII reports : Please see if you can answers one , few or all of them .
    1. after the MII composite applications are built, how to view the reports... i.e is SAP recommending to use a different portal (for example the already existing  Enterprise portal) or the the portal on its MII is installed it self .....
    In short which portal is recommended...
    2.  MII 14.0 to be installed on just NW 7.31 with pure java stack or - NW CE 7.3 ... what is advantage of installing MII on CE 7.4 rather than on a pure java stack
    Sincerely,
    Neni.

    Hi Rakesh,
    MII has its own portal where you can create the links for the reports build in MII.(<protocol>://<server>:<port>/XMII/Illuminator?service=Personalization or Click on the the Home link in the home page of MII)
    Also every report has its own URL which then can be called from anywhere.
    So it depends on your business case whether you what to use MII portal or use reports from anywhere else.
    Regards,
    Rohit Negi.

  • HT201302 I have successfully downloaded my pics from my iphone to my mac, and they show having been downloaded, but I cannot view them.

    So I synched and downloaded all my pics from my iphone to my mac, and now for whatever reason I cannot actually see them.  I go into iphoto, itunes and cannot access them.  I see them in itunes and yet do not have th option to view.  Any ideas...?

    You can't open iPod touch, iPad and iPhone apps on the Mac. They use different operating systems that need different applications, so it's not possible to use your iPhone apps.
    Instead, you have to look for other applications in the Mac App Store or the Internet, because you can install applications from wherever you want

  • 531 Pending Downloads and can't start them.

    Hi guys,
    I recently had the support guys reset my account since I lost all of my data, to include backups.
    I see in iTunes that there are 531 Available Downloads, but whenever I try to check for downloads to get them running I get his error:
    'Unable to check for available downloads. The network connection was reset.
    Make sure your network connection setting are correct and your network connection is active, then try again.
    According to the Network Diagnostics test I cannot establish a secure connection to the iTunes store.
    I can access the secure account info page though and I am having zero issues with other applications on this machine.
    I have attempted this with the firewall both on and off. (Also verified that iTunes does have an exception.)
    Flushed DNS.
    Verified that TLS 1.0 and 3.0 were turned on.
    Rebooted several times.
    Still no dice. Anyone have any ideas?
    Also, it seems that this problem just started today.

    I should have mentioned, I'm running Windows 7 Home Premium 64-bit.
    Weird, as I was trying to generate the log file from diagnostics to post it here, the secure link test passed. Unfortunately, this didn't last and now I'm back to the above-mentioned error.
    Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
    ASUSTeK Computer Inc. G73Jh
    iTunes 10.1.1.4
    QuickTime 7.6.9
    FairPlay 1.10.14
    Apple Application Support 1.4.1
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.3.0.69
    Apple Mobile Device Driver not found.
    Bonjour 2.0.4.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number
    Current user is not an administrator.
    The current local date and time is 2011-01-23 12:48:14.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., ATI Mobility Radeon HD 5870
    ** External Plug-ins Information **
    No external plug-ins installed.
    iPodService 10.1.1.4 (x64) is currently running.
    iTunesHelper 10.1.1.4 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {2E89ED57-C8CB-4616-BCE3-FB71F4A30844}
    Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 172.20.1.1
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Wed Dec 31 19:00:00 1969
    Lease Expires: Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name: {7458FC49-7AC8-49EB-B4E1-2DD96902F3A5}
    Description: Intel(R) Centrino(R) WiMAX 6250
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: Yes
    DHCP Server:
    Lease Obtained: Wed Dec 31 19:00:00 1969
    Lease Expires: Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name: {2A589DD7-891A-4768-99BF-37A3E3AF5D22}
    Description: Atheros AR8131 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
    IP Address: 172.20.8.150
    Subnet Mask: 255.255.0.0
    Default Gateway: 172.20.1.1
    DHCP Enabled: Yes
    DHCP Server: 172.20.1.1
    Lease Obtained: Sun Jan 23 11:57:06 2011
    Lease Expires: Mon Jan 24 11:57:06 2011
    DNS Servers: 66.255.85.8
    66.255.85.9
    Adapter Name: {EE8B1491-2F5D-49B7-8AFD-16FF6450252B}
    Description: VMware Virtual Ethernet Adapter for VMnet1
    IP Address: 192.168.0.1
    Subnet Mask: 255.255.255.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: No
    DHCP Server:
    Lease Obtained: Wed Dec 31 19:00:00 1969
    Lease Expires: Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name: {1CD62D00-20BD-4586-8D69-5D238C0A3F85}
    Description: VMware Virtual Ethernet Adapter for VMnet8
    IP Address: 192.168.226.1
    Subnet Mask: 255.255.255.0
    Default Gateway: 0.0.0.0
    DHCP Enabled: No
    DHCP Server:
    Lease Obtained: Wed Dec 31 19:00:00 1969
    Lease Expires: Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Last successful store access was 2011-01-23 12:46:33.
    Message was edited by: cjthibs

  • On iPhone 5s, I cannot see more than 11 messages.  I have NOT deleted older ones and need to view them.  How?  Scrolling in the list of 11 does not help.

    On iPhone 5s, when I click on "Messages" I can only view eleven when I scroll.  I need to view the older ones which I have NOT deleted.  How can I do that, please?

    You need the version of iPhoto that you wan tot use installed and then follow the IPLM directions
    http://www.fatcatsoftware.com/iplm/Help/downgrading%20a%20library%20to%20an%20ea rlier%20version%20of%20iphoto.html
    Downgrading a library to an earlier version of iPhoto
    If you have a library from a newer version of iPhoto that you simply want "downgrade" to an older version of iPhoto, the easiest way to do that is with the "Rebuild Library" command. You will want to be running iPhoto Library Manager on the machine that has the older version of iPhoto you want to convert the library to. This will create a new library and import the entire contents of the original library into the new one using the older version of iPhoto. As with any rebuild, there are some items that will not be included (most notably, hidden photos, books, calendars, and slideshows), but if you have none of these items or don't mind losing them in the downgrading process, then this is a decent option for converting a library to an older version.
    LN

  • How do i find audiobooks I downloaded and then listen to them on ipad

    I recently bought my first iPad.
    Using my MacBook Pro, yesterday, I bought my first audiobook from the iTunes store and it is in the Macbook iTunes.
    However, when I couldn't find it with the iPad, l looked up a discussion here and found that audiobooks only download to one device and that I had to sync the devices, which I did. The book showed up under "Audiobooks" on the Music app, but it wouldn't play on the iPad.
    The discussion said something about needing to buy and download a book onto the iPad to get audiobooks to work. Therefore, today I bought and downloaded a book to the iPad.
    Now I cannot find that book or the first book. And the Audiobooks category has disappeared from the bottom of the Music app window.
    What's going on? How do I find where the iPad has stored these books and how can I listen to them?

    The audio books do not show up on iBooks—only books and PDFs.
    I synced iPad with MacBook Pro and found my Library. Both audiobooks are there. Neither will play on the iPad.
    When I touch one to play it, or when I tap the play arrow, the line at the top indicating where I am in the book blinks on for a only second. The play button will briefly become pause button then goes back to play as if I had not tried to play it al all.

  • Inconsistent downloads and inability to use iTunes

    Hi
    I have a problem with my isa570. Ever since I started using it it sometimes takes me two or three clicks to get a website to load. Also connecting to iTunes is almost impossible. It does work sometimes but then very slowly. I have switched off application control. Can anybody help?
    Sent from Cisco Technical Support iPhone App

    Hi Neels, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. I apologize for your inconvenience you are having, to resolve the Itunes issue you can create an ACL allowing this web page, gs.apple.com. about your performance issue, sometimes your device CPU is at 100%, the cause of this problem could that you are overloading the device, you could have performance problems due to the amount of services you have activated, for example if you have enabled the IPS, if you have too many VPN,  routes, too many access-rules and others features enabled it could affect the performance I recommend you disable the features you are not using, you can also perform a factory reset and configure just the necessary features you need. Other think that you could check is the MTU size, try with 1450.
    I hope you find this answer useful
    “Please rate useful posts so other users can benefit from it”
    Greetings, 
    Johnnatan Rodriguez Miranda.
    Cisco Network Support Engineer.

  • When trying to view mi vid clips and exclamtion symbol appears and i cant view them

    When i click onto a video clip i have stored in itunes, and exclamation symbol appears beside it saying its missing and would i like to try and locate the clip myself. I have tried this and nothing seems to work, how can i removed the symbol and watch my video clips please help.

    When i click onto a video clip i have stored in itunes, and exclamation symbol appears beside it saying its missing and would i like to try and locate the clip myself. I have tried this and nothing seems to work, how can i removed the symbol and watch my video clips please help.

  • Help! I already purchased music, but I clicked download and it purchased them again.

    Ok so theres music that I already purchased on my itunes, and I went to my purchases and hit the download button because the albums all had the icloud symbol on them and it never allows me to play the music on my phone or laptop. Anyway, I hit download and it like bought them all again! So I'm trying to figure out who I can contact to get my money back. Thanks! <3

    Click here and ask the iTunes Store staff for a refund. If they got charged to a credit card, you can also contact the card’s issuer and dispute the charge.
    (116882)

  • Any ideas on how to step up my internets download and streaming speed?

    I just purchased a NEW computer 10 days ago and every since it's installation, my internet (specifically downloads and streaming) is slower than it was on my previous computer. Downloads on my xbox take a lot longer as well as it's setup in my wireless network. I live in Buffalo NY and have Verizon DSL with a westell 6100 modem and a Netgear router. I have done 3 speed tests in the past two days with these results:
    #1 - 1.01 Mb/s download 0.65 Mb/s upload 50 ms latency 
    #2 - 1.01 Mb/s download 0.67 upload Mb/s 48 ms latency
    #3 -  0.52 Mb/s download 0.62 Mb/s upload 58 ms latency
    #3 being the most recent.
    Any ideas on how to step up my connection speed? The stop and go of video buffering is driving me insane!

    Does the speed improve when you remove the new PC from the mix? What operating system does the old computer and new computer have?
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Build internet application I e-copy

    hi all
    when can i find e-copy of buid internet application I and II material?
    thank you

    Are you referring to Education material? If so, you'll have to contact them.
    Regards,
    Robin Zimmermann
    Forms Product Management

  • What do I do? CS6 how to download and install?

    I just bought full Creative Suite CS6 educational edition. It's taking quite a bit of time to download, how long is it supposed to take? I have CS4, do I need to deactivate it before installing CS6? Three of the component have finished their download and when I opened them, all there was were the font for Illustrator and InDesign and the pdf instructions. What's next to do?

    I also downloaded the Akamai NetSession Interface and the InDesign contents and Illustrator contents, these last two contain files of fonts. My question is where do I save these files so that they open when I open the applications? Do I save the Akamai too?
    Thank you for your reply.

  • Clients finds updates that is not deployed and fails to install them! Code: 80242006

    Hello!
    I have SCCM 2007 SP2 R2 and trying to setup the Software Update Point!.
    The weird thing is that the computers finds updates that is not deployed or not even downloaded and tries to install them but the fail with the error code: 80242006.
    See Pic:
    http://img51.imageshack.us/img51/3180/errorjo.jpg
    Some of those updates in the picture actually are downloaded and deployed but many of them are not.
    "Computer Configuration --> Administrative Templates --> Windows Update --> Specify Intranet Microsoft Update Service Location" is pointing to our SCCM.
    "Install Software Uppdates" in Task Sequance are disable.
    The Update package is distrubuted to all DPs
    Why does my computer find updates that is not is deployed or downloaded and why does it fail to install those that are?
    Where do i start the troubleshoot?
    // Clint eastwood!

    First check the windowsupdate.log and see which WSUS server that is being used. A Configmgr controlled client will not install non-deployed updates.
    Kent Agerlund | My blogs: blog.coretech.dk/keaand
    SCUG.dk/| Twitter:
    @Agerlund| Linkedin: Kent Agerlund
    Hi!
    I Reinstalled the computer through our Task Sequence and when i logged in the first time all the failed updates where there!
    http://www.2shared.com/file/eZ_CYzDC/WindowsUpdate.html
    I Have uploaded the WindowsUpdate.log
    Some interesting things from the log:
    2012-03-27 17:12:43:808 1008 848 PT +++++++++++ PT: Synchronizing server updates +++++++++++
    2012-03-27 17:12:43:808 1008 848 PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
    2012-03-27 17:12:44:931 1008 848 PT WARNING: Cached cookie has expired or new PID is available
    2012-03-27 17:12:44:931 1008 848 PT WARNING: PTWarn: Anonymous plug-in skipped for WU
    2012-03-27 17:12:46:478 2584 a1c Misc =========== Logging initialized (build: 7.1.6001.65, tz: +0200) ===========
    2012-03-27 17:12:46:478 2584 a1c Misc = Process: c:\bc396c964f9a1206ade01b43a1\wusetup.exe
    2012-03-27 17:12:46:478 2584 a1c Setup Evaluating CBS package "c:\bc396c964f9a1206ade01b43a1\WUClient-SelfUpdate-Core-TopLevel.cab"
    2012-03-27 17:12:47:823 2584 a1c Handler FATAL: UH: 0x8007047f: CreatePackage failed in CCbs::CreatePackage
    2012-03-27 17:12:47:823 2584 a1c Setup WARNING: Failed to evaluate applicability, will try to install anyway, error = 0x8007047F
    2012-03-27 17:12:47:823 2584 a1c Setup Evaluating CBS package "c:\bc396c964f9a1206ade01b43a1\WUClient-SelfUpdate-ActiveX.cab"
    2012-03-27 17:12:47:823 2584 a1c Handler FATAL: UH: 0x8007047f: CreatePackage failed in CCbs::CreatePackage
    2012-03-27 17:12:47:823 2584 a1c Setup WARNING: Failed to evaluate applicability, will try to install anyway, error = 0x8007047F
    2012-03-27 17:12:47:823 2584 a1c Setup Evaluating CBS package "c:\bc396c964f9a1206ade01b43a1\WUClient-SelfUpdate-Aux-TopLevel.cab"
    2012-03-27 17:12:47:854 2584 a1c Handler FATAL: UH: 0x8007047f: CreatePackage failed in CCbs::CreatePackage
    2012-03-27 17:12:47:854 2584 a1c Setup WARNING: Failed to evaluate applicability, will try to install anyway, error = 0x8007047F
    2012-03-27 17:12:47:854 2584 a1c Setup wusetup has finished. Exit code is 47f. Reboot is NOT needed
    2012-03-27 17:13:11:539 1008 848 Agent WARNING: Failed to evaluate Installed rule, updateId = {818701AF-1182-45C2-BD1E-17068AD171D6}.101, hr = 80242013
    2012-03-27 17:13:12:337 1008 848 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
    2012-03-27 17:13:12:337 1008 848 Misc Microsoft signed: Yes
    2012-03-27 17:13:12:384 1008 848 Misc Validating signature for C:\Windows\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\muv4wuredir.cab:
    2012-03-27 17:13:12:384 1008 848 Misc Microsoft signed: Yes
    2012-03-27 17:13:12:384 1008 848 PT +++++++++++ PT: Synchronizing extended update info +++++++++++
    2012-03-27 17:13:12:384 1008 848 PT + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, Server URL = https://www.update.microsoft.com/v6/ClientWebService/client.asmx
    2012-03-27 17:13:13:948 1008 848 DtaStor WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/secu/2011/01/windows6.1-kb2475792-x64_2e8f675625883458482042e128f54167f0193f9b.msu for file Lo9nViWINFhIIELhKPVBZ/AZP5s= when file has not been previously added to the datastore
    2012-03-27 17:13:13:948 1008 848 DtaStor WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/secu/2011/01/windows6.1-kb2425227-x64_0749e0e8531479e1de9347fe584e61d43c209c0f.msu for file B0ng6FMUeeHek0f+WE5h1DwgnA8= when file has not been previously added to the datastore
    2012-03-27 17:13:13:948 1008 848 DtaStor WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/secu/2011/01/windows6.1-kb2485376-x64_7082a10a94b6cfffdd28f5f57f02e15a5345f5a7.msu for file cIKhCpS2z//dKPX1fwLhWlNF9ac= when file has not been previously added to the datastore
    2012-03-27 17:13:13:948 1008 848 DtaStor WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/dflt/2011/02/4114643_f51f1bdeb794bd3966e7fc1745b9f697584b6912.cab for file 9R8b3reUvTlm5/wXRbn2l1hLaRI= when file has not been previously added to the datastore
    2012-03-27 17:13:13:948 1008 848 DtaStor WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/dflt/2011/02/4114639_25270be196f84651a08b6578559a014e067b04b9.cab for file JScL4Zb4RlGgi2V4VZoBTgZ7BLk= when file has not been previously added to the datastore
    2012-03-27 17:13:13:948 1008 848 DtaStor WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/dflt/2011/02/4114417_7f54b04997e2e7a214de150fed8cbec149c31011.cab for file f1SwSZfi56IU3hUP7Yy+wUnDEBE= when file has not been previously added to the datastore
    2012-03-27 17:13:13:948 1008 848 DtaStor WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/dflt/2011/02/4114242_dc45445930326e31180748cd5a2afa8f575c61f5.cab for file 3EVEWTAybjEYB0jNWir6j1dcYfU= when file has not been previously added to the datastore
    2012-03-27 17:13:13:948 1008 848 DtaStor WARNING: Attempted to add URL http://download.windowsupdate.com/msdownload/update/software/secu/2011/01/windows6.1-kb2479628-x64_a774713ef62d45373a08d4a7c0acfa18e8ec87c8.msu for file p3RxPvYtRTc6CNSnwKz6GOjsh8g= when file has not been previously added to the datastore
    2012-03-27 17:13:16:624 1008 848 Agent * Found 103 updates and 17 categories in search; evaluated appl. rules of 489 out of 647 deployed entities
    I guess the computer is still in the OS installation during this time.
    Then 13 Minutes after it finds our sccm:
    2012-03-27 17:26:07:641 980 c70 Agent *********** Agent: Refreshing global settings cache ***********
    2012-03-27 17:26:07:641 980 c70 Agent * WSUS server: http://<SCCM-SERVER>:8530 (Changed)
    2012-03-27 17:26:07:641 980 c70 Agent * WSUS status server: http://<SCCM-SERVER>:8530 (Changed)
    2012-03-27 17:26:07:641 980 c70 Agent * Target group: (Unassigned Computers) (Unchanged)
    2012-03-27 17:26:07:641 980 c70 Agent * Windows Update access disabled: No (Unchanged)
    2012-03-27 17:26:07:641 980 c70 AU AU received policy change subscription event
    2012-03-27 17:26:07:641 980 c70 AU Sus server changed through policy.
    2012-03-27 17:26:07:641 980 c70 AU AU Refresh required....
    2012-03-27 17:26:07:641 980 c70 AU AU setting next detection timeout to 2012-03-27 15:26:07
    2012-03-27 17:26:07:656 980 c70 AU Need to reset accelerated install required state
    2012-03-27 17:26:07:656 980 c70 AU Accelerate Install required state reset
    2012-03-27 17:26:07:656 980 c70 AU Auto-approving update for download, updateId = {4AE85C00-0EAA-4BE0-B81B-DBD7053D5FAE}.104, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
    2012-03-27 17:26:07:656 980 c70 AU Auto-approving update for download, updateId = {C5306702-92EC-4E99-9C77-2B70FB60078B}.101, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
    2012-03-27 17:26:07:656 980 c70 AU Auto-approving update for download, updateId = {C5171A07-B024-44B4-B74A-A2EC2EEC177C}.102, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
    2012-03-27 17:26:07:656 980 c70 AU Auto-approving update for download, updateId = {1FE1AC0A-7B22-470B-A317-5DA507385409}.101, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
    2012-03-27 17:26:07:656 980 c70 AU Auto-approving update for download, updateId = {609AEF10-0A3C-4484-BD38-86BB38E3EFA3}.104, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
    2012-03-27 17:26:07:656 980 c70 AU Auto-approved 65 update(s) for download (NOT for Ux)
    This is the Updates that i see when i log on for the first time nad all of them is Failed! Still, Many of those updates does not exist on the SCCM server.
    And here comes the error:
    2012-03-27 17:26:07:937 980 914 Agent WARNING: fail to get update deployments with error 0x80248007
    2012-03-27 17:26:07:937 980 a10 Agent WARNING: Failed to get deployment data from data store, error 80248007
    2012-03-27 17:26:07:937 980 914 DnldMgr *************
    2012-03-27 17:26:07:937 980 914 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
    2012-03-27 17:26:07:937 980 a10 AU WARNING: GetUpdateDeployment3 failed, error = 0x80248007
    2012-03-27 17:26:07:937 980 914 DnldMgr *********
    2012-03-27 17:26:07:937 980 914 DnldMgr * Call ID = {B6C9F0ED-9900-42BC-9BBE-61ADE865CADC}
    2012-03-27 17:26:07:937 980 914 DnldMgr * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
    2012-03-27 17:26:07:937 980 914 DnldMgr * Updates to download = 1
    2012-03-27 17:26:07:937 980 914 Agent * Title = Security Update for Windows 7 for x64-based Systems (KB2584146)
    2012-03-27 17:26:07:937 980 914 Agent * UpdateId = {4AE85C00-0EAA-4BE0-B81B-DBD7053D5FAE}.104
    2012-03-27 17:26:07:937 980 914 Agent * Bundles 1 updates:
    2012-03-27 17:26:07:937 980 914 Agent * {112FA241-E8C9-4EE7-A8B4-D3A4C65F7FEB}.102
    2012-03-27 17:26:07:953 980 c70 AU AU received handle event
    2012-03-27 17:26:07:984 980 914 PT +++++++++++ PT: Synchronizing file locations +++++++++++
    2012-03-27 17:26:07:984 980 914 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://<SCCM-SERVER>:8530/ClientWebService/client.asmx
    2012-03-27 17:26:10:652 980 914 PT WARNING: GetFileLocations failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
    2012-03-27 17:26:10:652 980 914 PT WARNING: SOAP Fault: 0x00012c
    2012-03-27 17:26:10:652 980 914 PT WARNING: faultstring:Server was unable to read request. ---> There is an error in XML document (1, 369). ---> The string '' is not a valid AllXsd value.
    2012-03-27 17:26:10:652 980 914 PT WARNING: ErrorCode:(null)(0)
    2012-03-27 17:26:10:652 980 914 PT WARNING: Message:(null)
    2012-03-27 17:26:10:652 980 914 PT WARNING: Method:(null)
    2012-03-27 17:26:10:652 980 914 PT WARNING: ID:(null)
    2012-03-27 17:26:10:652 980 914 PT WARNING: PTError: 0x8024400d
    2012-03-27 17:26:10:652 980 914 PT WARNING: GetFileLocations_WithRecovery failed: 0x8024400d
    2012-03-27 17:26:10:652 980 914 PT WARNING: PTError: 0x8024400d
    2012-03-27 17:26:10:652 980 914 DnldMgr WARNING: SyncFileLocations failed with 0x8024400d.
    2012-03-27 17:26:10:652 980 914 DnldMgr WARNING: PopulateFileUrlsForCall failed with 0x8024400d, but continuing with call {B6C9F0ED-9900-42BC-9BBE-61ADE865CADC}.
    2012-03-27 17:26:10:652 980 914 DnldMgr *********** DnldMgr: New download job [UpdateId = {112FA241-E8C9-4EE7-A8B4-D3A4C65F7FEB}.102] ***********
    2012-03-27 17:26:10:652 980 914 DnldMgr * Queueing update for download handler request generation.
    2012-03-27 17:26:10:652 980 914 DnldMgr Generating download request for update {112FA241-E8C9-4EE7-A8B4-D3A4C65F7FEB}.102
    2012-03-27 17:26:10:652 980 914 Handler Generating request for CBS update 112FA241-E8C9-4EE7-A8B4-D3A4C65F7FEB in sandbox C:\Windows\SoftwareDistribution\Download\9214be182ea0ec97ce8a55beaa608a67
    2012-03-27 17:26:10:652 980 914 Handler FATAL: Self-contained package file does not exist or is not on server.
    2012-03-27 17:26:10:652 980 914 Handler FATAL: Request generation for CBS update complete with hr=0x80242006 and pfResetSandbox=0
    2012-03-27 17:26:10:652 980 914 Handler FATAL: Error source is 105.
    2012-03-27 17:26:10:652 980 914 DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80242006.
    2012-03-27 17:26:10:652 980 914 DnldMgr Error 0x80242006 occurred while downloading update; notifying dependent calls.
    2012-03-27 17:26:10:668 980 914 Agent *********
    2012-03-27 17:26:10:668 980 14b8 AU >>## RESUMED ## AU: Download update [UpdateId = {4AE85C00-0EAA-4BE0-B81B-DBD7053D5FAE}]
    2012-03-27 17:26:10:668 980 914 Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
    2012-03-27 17:26:10:668 980 14b8 AU # WARNING: Download failed, error = 0x80242006
    Any ideas? :)

Maybe you are looking for

  • Unable to add aspx file to document library using REST and JSOM in SharePoint Hosted App

    Hi, I am unable to add an aspx file to document library.  I was actually trying to create a WIKI page and upload to Pages library but that wasn't working so I tried simple document library.  It keeps failing with Access Denied error.  I have checked

  • Trying to take the little lock off the song when i drag the song to my desk

    Please help when i drag a song from itunes to my desktop thiers a lock on the top left coner of the song i tryed to put the song on my mp3 but it wont play how do i take the little lock of because my friend does the same but he has no lock on his son

  • Help - iPod updater hangs/doesn't recognize

    Any help will be appreciated..I am just sick n tired of this gadget.. - My iPod mini displays an folder with exclaimation mark (not sure why). - So after reading this forum/support site, i decided to restore my mini. - Now, if i start iPod updater to

  • StuckThead on Process.waitfor

    Version Weblogic 9.2.1 OS: Solaris 10 We are encountering StuckThread when we are execing out to a process from within a MessageDrivenBean. The error seems to occur after high volume of JMS messages to the queue (around 3000 in a hour time frame). Th

  • Dense_rank() question

    My question when is best to use dense_rank(). Looking for an example.