Internet usb dongle not being recognised.

When I connect the usb internet dongle to my MAC it does not recognise it.

Did you install the dongle drivers for your operating system. Look on the dongle provider's site for drivers and install them in accordance with the provider's instructions.

Similar Messages

  • USB Modem not being recognised in OSX

    Sorry if this is being posted in the wrong forum.
    I have an oldish Usb modem (Intel(R) AnyPoint(R) DSL Modem 3240 http://www.intel.com/support/network/dslmodems/sb/CS-009978.htm) that I have been using for a while with my PC laptop.
    I have recently updated to a MacBook and was expecting this modem to be fine since it has worked succesfully with a friends older iBook (he simply plugged in the usb cable and was able to connect to the internet once I gave him the Username/Password. No software installation was required) but on my MacBook the modem doesnt seem to be recognised.
    I have followed the install instructions to the letter but when it comes to plugging in the usb modem nothing happens and no modem is found (the l.e.d on the front of the modem stays off)
    If anyone has any suggestions that would be great. I only need access to broadband very occassionaly and would like to avoid having to buy a new modem. Thanks
    MacBook   Mac OS X (10.4.6)  

    Generally usb modems don't work or don't work well on Macs
    IMO, that is a bit of a sweeping statement. Most people in the UK use a USB modem, not least because they were supplied free by your ISP.
    Get a modem with ethernet
    Better still get a router, which what many UK ISPs now provide free.

  • My Canon PIXMA MG2440 USB is not being recognised and I can not print anything..?

    I cannot use my printer as the USB is saying its not recognised.
    I never needed a driver for this printer before and it used to work fine. 
    I have no idea how to get my printer to work as I cant connect it to my laptop?

    Hi mrsrsimmo,
    If the printer is not being recognized, please try connecting the printer to another USB port on your computer, and also use a different USB cable if you have one.  We also recommend installing the latest drivers and software for the printer.  Since you have the PIXMA MG2440, please click here to go to the Support and Downloads page on the Canon Europe website where you can download the drivers.
    Hope this helps!
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HT4619 MEMORY STICKS IN USB PORTS NOT BEING RECOGNISED

    I am setting up a new iMac and uploading images and videos from other computers. My iMac will not recognise memory sticks inserted into the USB ports. Can anyone assist please?

    Thank you for replying. Both new sticks were used first in windows based computers at work and I tried to download images on my home iMac. I have been able to connect iPad and iPhone through the USB ports.
    I have also found that some music CD's have not been recognised in the DVD/CD slot.
    I have a lot of learning to do.

  • Qosmio F10 - USB devices not being recognised properly

    Hi there,
    I've been having major problems with the USB ports of my Qosmio F10. When ever I try to plug in a USB device, the F10 recognises there is something there, but always categorises it as an unknown device. For example, everytime I try to attach a USB mouse, it does not instantly recognise it, even after previously having gone into the device manager and manually installing a driver.
    This has been the case since I bought the laptop 5 months ago, but I cant ignore it any longer.
    I have already tried :
    - uninstalling all USB controller and hub drivers and reinstalling
    - making sure that power save for the usb devices was not ticked
    -ticking "install software anyway" in the driver signing options
    When I open up device manager my USB looks like this
    - Intel (R) 82801DB/DBM USB 2.0 Enhanced Controller - 24CD
    - Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C2
    - Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C4
    - Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C7
    -USB Root Hub
    -USB Root Hub
    -USB Root Hub
    -USB Root Hub
    Any help on this is much appreciated as its driving me nuts :-)

    Hi
    I agree with Jack. You have suggested that the USB devices were recognized but as an unknown device. In this case the device drivers are needed.
    Which USB devices did you connect?
    Sometimes some USB devices cannot be recognised properly because of the low power of the USB ports. If the USB device needs more power than 500mA standard power the OS could has some problems with the recognition.
    In this case you need a external power supply or a USB hub with the power supply.

  • USB port not being recognised

    Hello,
    When I plug in my mouse, the light leds of the mouse light up, however my mac does not recognise it (it doesnt work)
    The same goes with a USB flashstick, once i plug it in either of the 2 ports, the USB flashes, however my mac does not regonise it.
    It's been going on for a long time, resetting does not work as well as the PRAM reset
    Does anyone have any solutions?

    Hello sqvic,
    The following articles provide some useful tips and information that can help get your USB ports working.
    OS X Mavericks: If a USB device isn’t working
    http://support.apple.com/kb/PH13876
    USB: Troubleshooting Error Messages
    http://support.apple.com/kb/TA25618
    Cheers,
    Allen

  • Is anyone using VMware fusion and having trouble with USB devices not being recognised

    I have an Terratec Axon AX50 Guitar to Midi interface. The editor software is not Lion compatible so I have attempted to run that bit in Windows 7 on a virtual machine.
    The problem is that the VM machine will not recognise the USB device, even though when it asks which machine I want to connect to it names the device correctly.
    Any Ideas ?

    Device not recognized by iTune
    http://support.apple.com/kb/TS1591

  • Usb devices not being recognised

    hello my external devices such as my printer or edirol sound recoreder are not appearing on my desktop when i plug them in. After seeking advice i have located them in the system profiler (usb part) and it can read and recognises them. however i do not know what to do next does anyone know what to do as i have no idea and really need it to work for my uni work, please help cheers

    First welcome to the discussions.
    Most USB periperals come with either Cd or software to run them. Printers, Scanners, Cameras, and some don't.
    Each one can be a little differnt. I will use a Printer, If it is compatible.(OSX has some drivers installed to use these devices but not for all.)
    First let's start from scratch pull the power on your printer, and wait a minute or so. Plug it back in and restart your computer.Make sure the USB is plugged in when you do this, This will reset the printer and the computer.
    place the disc that came with the printer in and Install the software, as soon as you are done go to your printer manufactures site and search for the latest download for your Printer and Operating system. Download it.
    Go to your Mac HD and then Applications folder and you will see a folder that matches your printer,drag the folder you downloaded from there site to this folder and double click it inside that folder. Depending this printer folder can be named different things, such as (HP952c Printer) or set up or Install. It can also be located in the Utility folder.
    Open it and see if there is an Install option. click it and launch it.
    This may seem a little confusing, but it's not really,
    Most people have problems with one of a couple a different things.
    Either there printer isn't compatibble,
    Or they havent opend the folder in the Applications, or Utility folder to launch there printer drivers.
    After you read this it should be pretty easy for you. Come back and tell us if this helped. Don

  • USB Audio CODEC not being recognised.

    Hello,
    I have my my Wharfedale 802 mixer plugged into my MAC Mini (late 2012),  Processor - 2.5 GHz Intel Core i5, Memory - 4 GB 1600 MHz DDR3, via USB however it is not being recognised as USB audio CODEC what so ever. I have also tried searching for this to set the outputs in Logic and it is not recognised there either.
    I have just updated my iOS to Yosemite 10.10.2 and also my Logic X does anybody know why my mac is not recognising my USB audio CODEC for an input or output?
    Please help.
    Thanks

    I just posted this problem I had also. The USB audio Codec is for PPC macs only. I couldnt get a PYLE USB cassette deck to work in AUDACITY because it needed that codec.Windows users use this codec for many devices including the one you are trying to connect.
    My post in Snow leopard forum:
    I have come to the conclusion that this codec only worked on Macs that used PPC chips,not Intel Macs.Apple must have dropped it when switching to Intel.No where on the net can I find anything about this codec on newer mac OS's and newer Macs.
    Judging from this user's comment and others,they are working with OSX10.4 or newer OS that has PPC support like the first Mac Pro and other PPC's.I think the comments below answer my own original question.Hope this helps anyone with the same kind of problem with USB devices that need USB audio CODEC.
    In Audacity prefs, I selected:
    "USB Audio CODEC" for both Input and playback.
    I even tried lower sample rates and such. Record button stays grey and readouts don't show any input whatsoever even though I am sending a signal.
    Mac is a 533Ghz g4 (Digitial audio) running 10.4.11
    It is plug into a USB port on back of machine.

  • My iphone 3GS is not being recognised by my PC?

    My iphone 3GS is not being recognised by my PC, either in itunes or My Computer as a drive. iPad and iPod work fine.
    Phone also not found on other computers I have tried.
    Tried resetting the phone. Reloaded iTunes. Stumped now.

    Now sorted thanks. It was the cable, seemed identical, would charge the phone through the USB port but did not show up as a drive.

  • Ipod not being recognised, but with a twist

    Hi,
    My ipod nano 5th Gen is not being recognised on my computer. It is now being recognised by the computer itself sometimes, but not itunes. However, when I plug my ipod into my partners laptop, its fine. More to the point, when they plug their's into my laptop, it recognises them. To me, this suggests that both my laptop and my ipod, individually at least, are working.
    I have been through the ipod support page, and gone through all the steps, and to no avail.
    Final details. I'm Windows 8, and my itunes is totally up to date. I have re-installed iTunes, and have reset my ipod to factory settings on another computer. It still doesn't work, please help if you know anything about this!!
    Cheers,
    Ralf

    I have the same issues. itunes 5.0.1.4 doesn't recognize my mini. ipod updater doesn't recognize my mini either. i have uninstalled itunes 5 and reinstalled 4.9, but it didn't work still. something in itunes 5 changed something in my system that reinstalling 4.9 doesn't fix it. updater just shows that i have no ipod connected. if i try to get updater to check for my ipod during the updater installatin, it just sits there and says "waiting for ipod". it's not my usb port because i can read and write to my ipod. i did the entire list of chores that apple suggests on the site including disabling all other functions and services, reinstalling the com port, uninstalling everything, reinstalling everything, getting windows install clean up, e v e r y t h i n g! nothing worked.
    I then installed itunes 4.9 and updater 1.4 in my other laptop. i was able to update to firmware 1.4 using that computer. when i put the ipod into that computer w/ itunes 4.9, everything works fine. of course, it asks me if i want to link that laptop w/ my ipod. i said no, because i want to use my original laptop w/ the ipod.
    anybody have a solution for this? it's like we all have the same symptoms and going to the same doctor and we end up having to diagnose ourselves. this is extremely annyoying and inefficient.

  • IPhone 3G not charging and not being recognised by PC

    I plugged my iPhone 3G into my laptop today to charge it, as the battery was extremely low and for some reason, it's not being recognised by my computer at all, and it's not charging at all.
    I've tried plugging it into a powerpoint in the wall as well, and it still doesn't charge.
    I plugged my iPod into my computer with the same USB cable, and it worked fine.
    If I hold in the power button at the top, the battery picture comes up with a tiny bit of red in it and the power cable -> charge pictures come up underneath, then the screen just goes black again.
    I've never had this problem before, so I'm not sure what to do.
    Any help would be greatly appreciated.

    I had the same problem after the upgrade, but think I may have a solution. The problem doesn't seem to be that the phone isn't charging, it's that the indicator isn't showing that it has charged. Try this:
    1. Plug into the wall socket.
    2. Push and hold the power button, you should get a "slide to turn off" kind of message -- do it.
    3. Let the phone power off, and leave it that way for a slow count of ten.
    4. Turn it back on by pushing and holding the power button -- you'll get that black screen with the apple logo, don't panic, it just takes a minute to power up, you haven't lost anything.
    When it came on, the indicator showed it was fully charged from the night before. My concern is that the indicator got hosed by the upgrade.
    Try that out, let me know if it works -- and at your own risk. It worked for me as written, but I can't guarantee that will do the trick or not wipe your phone. I don't think so, it seems innocuous enough, just wanted to make sure you're aware there could be another resynch needed if it does do something else for you.

  • Nokia X6 16GB not being recognised by PC Suite/OVI...

    Hi,
    I bought my Nokia X6 16GB around november...the phone was working fine and was able to connect to PC as Mass storage device.
    2 days back when i tried to connect to OVI suite to download maps...my phone was not being recognised by OVI suite/PC suite. But i can still connect it as Mass Storage Device.
    I browsed through other posts...and tried eveyrthing...i.e... I tried uninstalling PC SUITE, OVI SUITE, Connectivity Cable Driver,etc...Removed all entries from registry!....Tried reinstalling again all these to my PC....Reformatted by Mass Storage in the Phone. Tried resetting to factory settings....but no luck!
    Also under USB connections in the mobile, i get only 4 options...
    1. OVI Suite
    2. Mass Storage
    3. Image Transfer
    4. Media Transfer
    I dont see any PC Suite option.
    Also whenever i connect the phone to the PC...i get a found new hardware wizard with the following message.
    Cannot install this Hardware
    There was a problem installing this hardware
    Nokia X6-00 USB Phone Parent
    An error occurred during the installation of the device.
    The system cannot find the file specified.
    Nokia Ovi Suite 3.0.0.290
    Nokia PC suite 7.1.60.0
    PC Connectivity Solution 10.50.2.0
    Connectivity Cable Driver 7.1.36.0
    Operating system: Microsoft Windows XP 32-bit Edition, Service Pack 2
    Pls help at the earliest...really spend a lot of time to fix this issue....my last option is hard reset...which m not eager to do!...is there any other way out?
    Attachments:
    nokia err msg.JPG ‏30 KB

    had this problem after doing a hard reset on my x6, pc suite and ovi suite would not recognise phone.
    The solution above worked great although i had to restart the pc after repairing drivers for it to connect.
    reason for hard reset was because the screen kept going all washed out/scrambled every now and then tho could get it back to normal after playing with lock button. hard reset did not fix this issue which i am still having.

  • Ipod nano 3g is not being recognised by my laptop(running win XP sp2) nor it is getting charged by an AC adapter

    My i pod nano is not being recognised by the computer(XP SP2) nor it is getting charged by an AC adapter..iTunes does not recognise it.
    Used all the troubleshooting tips and enabled disc use too..all these efforts were in vain....Need some quick tips!

    Big Big thank you to Varun at Apple Service & Support e-mailed me the following article and after following the instructions, I'm up and running. Thank you ......
    Link: http://www.info.apple.com/kbnum/n305136
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

  • My "iPod Classic (60GB) Click Wheel" is not being recognised in iTunes although the iPod shows up in 'my computer'.

    My iPod Classic (60GB) Clickwheel is not being recognised in iTunes although the iPod shows in 'My Computer'.  The problem started with an error message in iTunes saying "Could not complete sync as devise may have become corrupt" and suggested I restore the iPod to factory settings which I have done several times.  I've carried out an error check in the iPod properties.  I've completely removed iTunes and all related software components in the correct order and reinstalled version 10.5.3. I have been through the 5 R's numerous times but still the iPod is not being recognised in iTunes. I have Windows XP, I'm tearing my hair out now so any help or suggestions would be great

    Try and force iPod into Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPod
    Note: You need to be patient and repeat the above many times to recover your iPad

Maybe you are looking for

  • Unable to log into Presence after AD migration

    Presence 8.0.2.98000-5. CUPC clients receive 'Invalid User ID or Password' when attempting to log in. System was working fine prior to migration from Windows 2003 AD to Windows 2008 AD which necessitated a change to the LDAP Host Configuration IP Add

  • WAD: Push button not displaying some Web Items

    Hi All, I have a web template 7.x in which there is a push button for "Export to PDF". There are some changes carried out to this web template, to include one radio button web item. My requirement is to display this Web Item on the export to PDF page

  • Can't Install iTunes ANYMORE!!!!

    Okay, I had iTunes 7.1.1.5 installed on my computer and it was working fine, but I decided to update and I can't get iTunes 7.2 to install. I've NEVER had this problem with any version. I keep getting this message: "THE SYSTEM CANNOT OPEN THE DEVICE

  • Losing hyperlinks when linking word documents

    We use RoboHelp version 9.0 Project description We have a Parent project with 7 child projects. Each child project has, on an average, 40 files. The files in each child project are linked to word documents. Every time we have updates to content, we u

  • Verizon Web Pages (unable to view)

    I can not view media or web pages related to ringtones/ringback tones...anyone else having this problem now?