Internet works on pc but not on mac

Hey everyone,, my internet that always bene working fine with my PC does not work so well with my powerbook, many pages that is working 100% correctly on my PC can not be seen in Safari.
I would like to point out that internet does work on my mac but not even close to as good as on my PC.. any ideas how to fix this issue?

I am using Safari and Internet Explorer for mac & is connected too internet with my ADSL modem (0,5mbit). The problem is that webpages at random does not work. It can be apple.com, Cnn.com, etc. Any webpage at all. Webpages that is working without any problems att all when I use my PC

Similar Messages

  • Slide show works on PCs but not on Macs

    A parent at the school where I teach has just created a
    website for us. She used Dreamweaver and photoshop to create it.
    There are some pages where there should be a looping slide show
    (that runs on its own). These slide shows work on PCs but not on
    Macs (it just stays on one photo on Macs). For the slide show she
    "just added a timeline to the jpg image, changing the imagesource
    every 60 frames, that you can do in dreamweaver." Is there some way
    to fix this so it works on both?
    Here's the school's website: www.smash.smmusd.org

    Unfortunately, the timeline function may not be the best way
    to do this.
    Notwithstanding Joe's comments about 508 compliance, there
    have been issues
    reported in the past regarding the use of timelines on Macs.
    It may be
    better to seek some 'banner rotation' scripts using Google,
    and replace the
    timelines with that script. Your volunteer may or may not
    know how to do
    that....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Joe Makowiec" <[email protected]> wrote in
    message
    news:[email protected]..
    > On 16 Jun 2007 in macromedia.dreamweaver, Mana Hale
    wrote:
    >
    >> A parent at the school where I teach has just
    created a website for
    >> us. She used Dreamweaver and photoshop to create it.
    There are some
    >> pages where there should be a looping slide show
    (that runs on its
    >> own). These slide shows work on PCs but not on Macs
    (it just stays
    >> on one photo on Macs). For the slide show she "just
    added a timeline
    >> to the jpg image, changing the imagesource every 60
    frames, that you
    >> can do in dreamweaver." Is there some way to fix
    this so it works on
    >> both?
    >>
    >> Here's the school's website: www.smash.smmusd.org
    >
    > I'd worry about accessibility/Section 508 issues before
    I worried
    > about slideshows. That page is all images.
    >
    >
    http://www.contentquality.com/mynewtester/cynthia.exe?rptmode=-1&url1=http%3A%2F%2Fwww.sma sh.smmusd.org%2F
    >
    http://www.contentquality.com/mynewtester/cynthia.exe?rptmode=2&url1=http%3A%2F%2Fwww.smas h.smmusd.org%2F
    >
    > --
    > Joe Makowiec
    >
    http://makowiec.net/
    > Email:
    http://makowiec.net/contact.php

  • Password on apple id works on iPad but not on Mac Pro

    Pass word on apple id works with iPad but not on Mac Book Pro, what is the solution, I have tried to reset password but that does not seem to solve the problem.

    It kind of depends on where you're entering the password on the MacBook Pro. iTunes Store? App Store?
    Try the password on this website https://id.apple.com/ (click on [manage my apple id]
    If it works on that website there's nothing wrong with your apple id or password. In that case we really will need to know exactly what you're trying to do when you're getting the password error.

  • AIRPORT WORKS ON WINDOWS BUT NOT ON MAC OSX

    I own a Mac Mini Intel and I have installed Windows XP with bootcamp. In Windows XP I can connect to my wireless router (and Internet)without problem, but not in Mac OSX. I had this problem with the 10.4.x version, and although I have upgraded to Leopard, the problem continues the same. I can access the router in Windows and change any settings (I say that for if someone knows the solution and it includes changes in the router). Has someone had this problem before? Has someone any solution to this problem? Thank you.

    Yes i Seem to be experiencing a similar problem as you, in which connecting to a router on OS X is easy but as soon as i try it on windows xp it cannot establish a connection but my router is already connectingto other windows pcs. Maybe this is because windows cannot recognizethe built in airport, or perhaps it needs to be configured in a way to work with both Xp and os X

  • Safari without flash works on iPad but not on mac

    I decided to remove flash from my mac, because I have found that a lack of flash really wasnt causing me any major problems on my ipad.
    However, when I access some sites, like this one.....  http://www.dailyfrail.com  on my ipad the embedded video works just fine, but on my mac it wants a plugin. 
    I tried using the develop option to pretend to be an ipad, but it still wants a plugin.
    How do I make safari on mac work as good as safari on an ipad?

    The site requires Flash.
    The 10.6 Flash plugin works on v10.7.
    Adobe - Install a different version of Adobe Flash Player

  • Internet works on partition but not on my mac

    Hello. My internet on my MacBook Air was working just fine, but suddenly it stopped being able to load any page stating the connection has timed out. It happens will safari, firefox and chrome. However, it works just fine in my Windows XP partition I have set up with VirtualBox. I'm not sure if relevant, but I recently updated from Lion to Maverick. Any recomendations?
    Thanks!

    Ah, after repeated restarts it seems to be working for the moment. Hopefully it is not a recurring incident.

  • New shuffle works with Windows but not with Mac

    Just got a new 2nd gen shuffle. Initially it was formatted as Fat32 per Disk Utility on Mac. I reformatted to Mac OS (journaled). iTunes was recognizing the new shuffle on the mac and I created a playlist that showed it took up disk space in the "summary" tab. However nothing played on the shuffle when I disconnected it. I was trying to update the software but that function is greyed out. I tried to click "enable disc use" and when I applied it, it says it can't find the ipod. It wont let me update anything. The only thing I can do is create a playlist that the summary says is on the ipod but it doesnt play.
    I then connected it to my Windows XP machine and it asked me to reformat the drive, which I did, then everything worked flawlessly. I would really prefer to download things to the shuffle from my Mac than Windows XP but it just won't let me. I tried using "iPod Updater" and the most recent one from the list was 03/2006 and that didn't help anyhting. "iPod Reset Utility" would not recognize the ipod to reset it even after I sucessfully set it to Mac OS journaled in Disk Utility.
    I am very frustrated. This also happened to my Nano I purchased a few months ago and I have to organize it on the PC as well.
    I am running iTunes 7.2

    I have exactly the same problem with my two
    computers, both of which are Macs. The shuffle is
    recognised on one, but not the other.
    Here's a screenshot of iTunes ->
    http://www.simongbrown.com/blog/images/2007/shuffle-no
    t-recognised.png
    BTW, I also have an older white iPod in use on the
    Mac that doesn't work.
    I've tried a few things (including running iTunes
    under a different user account, reinstalling iTunes)
    but nothing seems to help. The only thing left to do
    is reinstall the OS, but that sounds a little extreme!
    That's way too extreme... Use the shuffle Reset Utility.
    http://www.apple.com/support/downloads/ipodresetutility10formac.html

  • Internet works on guest but not main network

    We have an airport extreme connected to a Dsl modem. The internet works fine when connected to the guest network but when connected to the main network the browser just times out and says server is not responding (for any website we try). Same thing on several computers (iMac, 2 different MacBook Pros).
    The internet settings look the same for both guest and main network so I don't understand why one would work and not the other.
    I tried getting rid of the guest network but the main network still failed to load webpages (even though it appears to be connected to internet).

    Are you connecting the AirPort Extreme to a simple modem (it will only have one ethernet port), or is the device a gateway (combination modem/router with 3-4 ethernet ports)?

  • Internet works in VM but not native OS

    I am running an Ubuntu 9.04 virtual machine in VirtualBox on my Macbook pro. As I understand, VirtualBox tricks the guest OS to think there's an wired ethernet connection and redirects traffic through the hosts' connection. So I find it very strange that the internet works perfectly well inside my virtual machine, but it doesn't work in the host OS. Any ideas?

    Definitely strange. But, many have internet connection problems no matter what their circumstances. There are no good solutions yet. You could try what is suggested in this thread, but ....: http://discussions.apple.com/thread.jspa?threadID=1924527.

  • Internet works on Win7, but not Lion

    Okay, I've tried everything I can think of and I have no idea what to do next, as I've never really been a "networking" guy. I have a mid-2010, 15" MBP. I recently installed Win7 through Boot Camp, though this problem has existed since before that. Whenever I try to access the Internet while on the OSX partition, it is possible to usually load one or maybe two pages. After that, my connection comes to a virtual standstill and no other pages will load. If I am in Chrome, the browser keeps displaying "Sending request..." until it times out. It doesn't matter which brower I use though, all have the same problem. All the while, my Mac says that I have a solid connection. If I try to load something in more than one tab at once, then the connection stops almost immediately. Even if I have an ethernet cable connected and Wi-Fi disabled, the problem still persists.
    Now for the strange part. If I switch over to the Win7 partition and try to access the Internet, it works fine. I can open as many things in as many tabs as I want and it'll still work great. I've never had any problems with it while running Windows, so I'm guessing that it's something goofy in the settings on the Mac side, but for the life of me I can't find out where. Here are some of the things that I've tried doing:
         - I've tried changing the DNS settings and possibly using some other services (i.e. OpenDNS, Google DNS, etc.) but it doesn't help. I don't think it's      necessarily a DNS problem at this point, as I've tried directly going to an address (http://74.125.224.82/ instead of google.com, for example) and I have the      same problem.
         - On a recommendation, I've tried deleting /Library/Preferences/SystemConfiguration/preferences.plist to try and reset my network settings. Nothing.
         - I've deleted all wireless networks and tried re-entering the information for my Wi-Fi connection, but still get the same problem.
         - I've reset my cable modem (NetGear CG3000D) more time than I can count.
    And like I said, since I'm not a networking guy I can't think of anything else to try and fix it off the top of my head. I've been getting ping times of ~35ms, which seems pretty reasonable. A small amount of packet loss (~14%) occurs every now and then, but for the most part it's solid.
    So does anyone out there have any ideas what could be wrong? I can provide additional information if needed. Any and all help is greatly appreciated!

    Are you connecting the AirPort Extreme to a simple modem (it will only have one ethernet port), or is the device a gateway (combination modem/router with 3-4 ethernet ports)?

  • Wi-Fi card will work on OS9 but not with mac OS X

    I've been having a lot of problems with my imac until I brought to a repair center last year. They had to replace the motherboard and a few other compenents to get it working. Anyway, the end result would be that the wi-fi card wouldn't work. I can detect it and the computer can 'see' it in MAC OS X 'Tiger' but no wi-fi networks are detected. Now what's really strange is that networks are detected when I boot into mac os 9. I've looked for drivers for the airport card but nothing seems to work. Any ideas? One other thing...my internal modem does not work as a fax, it keeps saying modem busy (even though I have an ethernet connection). Please help. Thanks.
    iMac G4 flat panel   Mac OS X (10.3.8)  

    Proxy Settings may be set by connection however - that does not imply that all of the services provided by Apple Utilise these connections.
    *iPod Touch - No Firmware Updates Applied*: Able to use services like Google Maps, YouTube, Weather
    (Confirmed on 3 iPod Touches)
    *iPod Touch - Latest Firmware Updates Applied:* Unable to use services like Google Maps, YouTube, Weather. (Confirmed that this connection fails on 2/3 that have been upgraded, one is still pre v2 firmware and connects fine)
    Both iPod Touches are configured identically - with a static IP address, differing by one digit.
    Same DNS, Same Gateway, Same Proxy IP Address, Same Username/Password.
    The issue is not caused by configurations, it is caused by a difference in how authenticate proxy configurations are handled between the firmware supplied with a pre v2 iPod Touch, and the updated v2 firmware.
    Perhaps v3 will resolve this issue, but at this time if you have any choice, do not upgrade further iPod Touches to v2 if you require internet access via an authenticated proxy in applications such as Maps, Weather, Mail etc.
    Message was edited by: Caledai

  • Facetime works on iphone but not on mac using snow leopard?

    Face Time is synced to my iphone 4S, and Face Time works on it. But when I try to make calls on my imac (snow leopard) using Face Time, it doesn't work, it says that the 'call failed'. I've turned off Face Time on my iphone, so that the calls will go to the mac only, and calls i make will go from the mac only.
    Any ideas?

    The Version of Snow Leopard is 10.6
    My only thought as to why Facetime is not working is because of the recent changeover to iOS 6.
    Apple are obviously trying to get everyone on to Mountain Lion, but some users, including myself
    prefer to wait a while to let the gremlins get sorted.
    Any ideas on the above will be welcome

  • Works on PC, but not on Mac - 2 Monitors??

    When I plug a 2nd Screen into my MBP, and use the MBP screen for 2 independent programs How come that the Menu's and editing (at the top) only appear on the main screen??
    This can be confusing and irritating at times, switching back and forth
    When I try this with 2 monitors on a PC with 2 programs, both screens are 'self-contained' and work properly?
    Is there anyway around this on a Mac so it behaves like a PC, and uses two seperate monitors to use 2 seperate programs without switching back and forth to access the menu's?  

    No, the Mac only displays ONE menu bar also if you connect two monitors. You can select the monitor which should display the menu bar in System Preferences -> Displays.
    Also there is a tool called Secondbar? But never tried it myself.

  • Dynamic spelling works on PC but not on Mac CS5.5

    I have a simiar issue as ebookaficiando in a previous thread. in our group we use indd file cs5.5 on a pcs and macs, when we open the file in a mac  the dynamic spelling does not work. If we make a file from scratch on the mac, the dynamic spelling works normally.
    We need dynamic spelling to work on both PC and mac since we work on these same files on both PCs and Macs.
    Any ideas?

    Thanks Peter
    Yep - Checked the prefs and all the usual suspects and suggestions from a few previous threads, also updated to latest the version.
    The problem seems to be on all the files that were originally created in a PC environment. When we open the file in our Mac environment the Dynamic Spell check function no longer works - checked all the settings, the charcter language tab is on (US English), we're not in overprint preview mode etc. The dynamic spelling works fine in the PC environment. I guess not so many users are working in groups with a cross-platform environment.

  • Keynote for iPhone works with iPad but not with Mac

    I purchased Keynote for iPhone and is working well with my iPad but can't seem to transfer it to my Mac. Do I need to buy it separately?

    Keynote for iOS and Mac, are incompatible as they are written for different operating systems.
    You must install the Mac version on a Mac which is a separate purchase. It is free to users who purchased a Mac from mid-October 2013.

Maybe you are looking for

  • Creating a new report in 11.5.9

    I am trying to create a new report for Oracle Sales Online. I don't want to just do a simple JSP, I want to use some of the existing functionality that the existing pages are using. Take the Organization Summary page for example. Its the page called

  • Error While Configuring Receiver JDBC ADAPTER

    HI Experts,      while configuring the JDBC Receiver(Stored Procedure),I got the the follwing error's .PLease find the used data types and the exceptions (got) as follows. 1.Exception <SAP:AdditionalText> com.sap.aii.af.ra.ms.api.DeliveryException: E

  • How can I install adobe flash for my iPad 2

    How can I install adobe flash for my iPad 2

  • SELECTs in user exists (P/S modules)

    Hi, I am implementing user exist triggered when an accounting document is posted ... P/S event no. 00001030. The problem is, that I need to read some records from BSID table ... this event is triggered right before a commit is executed, therefore I s

  • Where do I get Toshiba Tools for Tecra A9 after HDD formatting?

    Hello. I've purchased a Tecra A9 notebook with Vista Business. I'd like to format it because there are a lot of tools and programms on it the notebook already that I do not need, and it's very slow. There is a "hidden partition", but if I use that to