Invalid DataStore object name error when running process chain after EHP1

Hello,
We recently upgraded our BW Dev platform to NW7.01 EHP1 SP6. I noticed that the layout for "Delete PSA Request" process in the Process Chain has changed after the upgrade. We can no longer specify the actual PSA table to delete eg, /BIC/B0001645. Instead we need to specify the Datasource name and the Source System.
Now after the upgrade when I run one of my process chains, it fails at "Delete PSA Request" step with error message "Invalid DataStore object name /BIC/B0001645: Reason: No valid entry in table RSTS". This datasource is based on the flat file source system and the PSA table for this Datasource is /BIC/B0001653.
Unfortunately the process chain is picking up an older PSA table for this datasource and there is no way for me to specify the current PSA table name after this change in layout with EHP1 upgrade. Any suggestions on how to resolve this issue.
Many Thanks,
Al

Hi,
Please implement OSS 1345331.
If this does not help try the below steps:
1. Run the report 'RSAR_PSA_CLEANUP_DIRECTORY/_MS' in check mode for a
       particular PSA table for finding the inconsistencies.
2.   After that please analyze the logs and if there is any problems related to partition, you need to correct them using the report u2013
3. 'SAP_PSA_PARTNO_CORRECT' in repair mode for the
      PSA tables. Run the report again after this
4. 'RSR_PSA_CLEANUP_DIRECTORY/_MS' in check mode to
     double check that the invalid partitions are
     corrected.
     Once this is done you can execute the report
     'RSR_PSA_CLEANUP_DIRECTORY/_MS' in repair mode.
-Vikram

Similar Messages

Error when run Process Chain via BPC NW

Hi Gurus,
I am implementing SAP BPC 7.5 NW in a customer and I´m facing the following error when try to run a process chain via Data Manager: "Failed to analyze instruction ,TAB,%TAB% ".
Here is the scenario: we created a process chain that will be able to capture values recorded in a BPC application, load them into an DSO (make some transformations there) and finally send those transformed values to an specific table at ECC. This process will be started after some simulations at BPC and, when the user ends its simulation, start this process chain via BPC; this process chain is named as PC_ECC.
We made a copy of /CPMB/DEFAULT_FORMULAS and named it PC_FORMULA and, before step /CPMB/CLEAR, I assigned my process chain PC_ECC.
So, at Data Manager, I add this process chain (PC_FORMULA) and in Advanced button, I put this statement:
INFO(%EQU%,=)
INFO(%TAB%,;)
TASK(PC_FORMULA,TAB,%TAB%)
TASK(PC_FORMULA,EQU,%EQU%)
TASK(PC_FORMULA,SUSER,%USER%)
TASK(PC_FORMULA,SAPPSET,%APPSET%)
TASK(PC_FORMULA,SAPP,%APP%)
//TASK(PC_FORMULA,LOGICFILENAME,DEFAULT.LGF)
//TASK(PC_FORMULA,REPLACEPARAM,TESTE3%EQU%%TESTE3%%TAB%ASARENT%EQU%%ASARENT%%TAB%SOURCE%EQU%%SOURCE%%TAB%TARGET%EQU%%TARGET%)
As we do not have any script logic to be executed, we commented the two last statements.
When we run this package via DM, it gives us the message error: "Failed to analyze instruction ,TAB,%TAB% "
Looking through SDN forum we found two posts similar to this issues:
But the suggestion to supress the statement TASK(PC_FORMULA,TAB,%TAB%) do not work; when we comment this statement, the message error gives us the message:"Failed to analyze instruction ,EQU,%EQU% "; when we comment the statement TASK(PC_FORMULA,EQU,%EQU%) and the previous (with TAB). the DM gives us the message: TASK(PC_FORMULA,SUSER,%SUSER%) and so on, until nothing has left to comment.
Anyone of you view or has some similar case of error?
Thanks in advance to you all
Best Regards
Adriano

Hi Rich,
Thanks for your answer.
I checked the parameter at my process chain and it has a variant (/CPMB/DEFAULT_FORMULAS_LOGIC) with the parameters:
TAB
SUSER
SELECTION
SAPPSET
REPLACEPARAM
MEMBERSELECTION
LOGICFILENAME
EQU
So, when I put in the task PC_FORMULA, TAB, %TAB%, it will be able to be recognized by the task...and the other parameters too. And when I take one of them off the task instructions, the system complains.
Any other suggestion?
Once again, thanks..a.nd best regards
Adriano

Invalid DataStore object name /BIC/B0000173: Reason: No valid entry in tabl

Hi gurus,
I recently transported the 0FI_GL_10 datasource to preproduction. when i am trying to load the data in PrePod we are getting this error message.
<b>Invalid DataStore object name /BIC/B0000173: Reason: No valid entry in table RSTS</b>
Any help is appreciated with points.

any more detailed messages,sm21 or st22??
did you try doing RSRV on the datastore object??
are you using the nw2004s data flow??
if using 3.x data flow ,skip PSA and try reloading it.
Hope it Helps
Chetan
@CP..

Invalid DataStore object name /BIC/B0005712

Hi Frnds,
I was trying to execute a PSA deletion step on one Datasource. In that process I got the below error.
Error msg: Invalid DataStore object name /BIC/B0005712: Reason: No valid entry in table RSTS.
Do, I need to maintain anything related to this Datasource in the table RSTS. if so....what it could be ?
Or Do we have any other solution ?
Thank you.
NGR.

Hi,
In my case,
Inspite of going through several valid NOTES & program, my issue didnt resolve.
I have resolved the issue by adjusting the PSA table for the same.
Procedure:
Take the psa name --> go to table rstsods --> find the ODSNAME_TECH name for the relevant psa --> se38 t.code --> enter ODSNAME_TECH and click on 'adjust & activate database table' (make sure you have selected 'save data' radio button.
Just in case anyone who come across this problem, can do the above steps.
Regards,
Dubbu.

Getting error when running process flows in oem

Hi all,
I'm trying to run a process flow in oem (using oem_exec_template.sql script), but it keeps failing with error "nms-1013: sqlplus does not exist". I tried running a map too and it failed with same message.
Any idea anyone?
Thanks!
Yanet

Hi,
Looks like you have an obvious code error, invalid cast operation in your code. Do you get this error when running in local emulator.
You can try the following article on how to debug published cloud service, assuming you have VS ultimate.
https://msdn.microsoft.com/en-us/library/azure/ff683671.aspx
Regards,
Nithin Rathnakar

Error when running process

Hi I get following error when executing process in htmldb. Process type used is Anonymous PLSQL block executing following >> EXEC PRE_AUD.TRANS.DBSTAT_ALL
error is ORA-06550: line 1, column 12: PLS-00103: Encountered the symbol "PRE_AUD" when expecting one of the following: := . ( @ % ; The symbol ":=" was substituted for "PRE_AUD" to continue.
Can I not execute package/proc > EXEC PRE_AUD.TRANS.DBSTAT_ALL as anonymous block?
thanks

Vinat,
"EXEC" or "EXECUTE" is a SQL*Plus command. Your PL/SQL process should simply be:
PRE_AUD.TRANS.DBSTAT_ALL;
Joel

Duplicate Object Name Error When Publishing Crystal Reports from BW to BOE

Hi,
We recently upgraded our systems (all client and server) to SP2.7 in order to solve a problem with saving Crystal Reports to BW. Now we are experiencing a new error when trying to publish a Crystal Report from BW to BOE (either all in one step from Crystal Reports application or directly from within BW).
Upon trying to publish a Crystal Report from BW to BOE, we get the following error:
"An error occurred while saving and / or publishing. The return code 1 was returned from the server. Logon to Crystal Enterprise failed. Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : Duplicate object name in the same folder."
We have repeated this issue numerous time with different reports, users and logon credentials and have verified that there are NOT any duplicate object names.
Additionally, in some cases, the report ultimately publishes to BOE, but with the above error interruption along the way.
Any ideas?
Thanks,
Josh
Edited by: Josh Crawford on May 10, 2010 9:46 AM

Ingo,
Apologies for the delayed response. We've spent a few days poking around with this issue, and had even opened a customer message for it (13641).
In the end, it seems that the problem was somehow associated with the "Prepare this report for translation." flag in the "Save to BW Options" dialog box of Crystal Reports. If we try to Save & Publish with the Translation flag selected, we get the duplicate entry error. If we Save & Publish without the Translation flag selected, everything is fine.
There are still some details we need to look into, but for the time being it looks like we don't have an issue anymore(assuming we ever did) as we're not concerned with Translation capabilities.
If we come across the problem again, I'll post again.
Thanks,
Josh

Error when collect process-chain

hi all,
When I collect the process-chain to transport in the transport-connection,an error occured in the below windows:
Object 'ATTRIBCHANEVEN_485MDFX3NYUF8PKGN9RSFATRD' (RSPV) of type 'Process Variants' is not available in version 'A'.
Could anybody help me?
The BI is 3.5 version
Best rgds!

the system tip of the error as below:
Object 'ATTRIBCHANEVEN_485MDFX3NYUF8PKGN9RSFATRD' (RSPV) of type 'Process Variants' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name 'ATTRIBCHANEVEN_485MDFX3NYUF8PKGN9RSFATRD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System response
The object was not taken into account in the next stage of processing.

Error when running root.sh after 11.g2 standalone rac installation

OS: redhat 5.8
After completing the installation, when running root.sh , I get error:
[root@vmorarac1 oracle]# ./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2/oracle
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
Unrecognized character \x03 in column 3 at /u01/app/11.2/oracle/perl/lib/5.10.0/File/Basename.pm line 1.
Compilation failed in require at /u01/app/11.2/oracle/crs/install/roothas.pl line 115.
BEGIN failed--compilation aborted at /u01/app/11.2/oracle/crs/install/roothas.pl line 115.

Based on error messages you are getting it narrows down to perl issue and invalid character present in perl script.
Have you or someone modified the perl script? Usually it is required to modify the scripts to point toproper perl location. Sometimes when you modify the script, the text editors could insert some characters in wrong encoding, etc. So I suggest to do comparison to perl scripts from the nodes with the same psu levels where installation was sucessfull., just compare filesize and if its different, then you could possible copy right scripts over current ones.
The GI installations are very hard to investigate remotely, there could be too many things that can be wrong, so oracle support is your friend.
As general thing I always recommend to install latest PSU before root.sh script execution.
Ed Rudans
erudans.blogspot.com

Error while running Process Chain

Hello all,
I am getting following error while running the process chain.
"Process Activate ODS Object Data, variant PROCESS PSA_TO_ODS_ZFIGL_O1 has status Canceled (instance )".
Due to this others are get affected..
Plz provide solution.
amit

Hello all,
I am getting following error while running the process chain.
"Process Construct Database Statistics, variant DB_STAT_0PY_C02 has status Canceled (instance) ".
Due to this others are get affected..
Plz provide solution.
amit

Verification error when run the game after download the jad/jar by OTA on BB 8300

On BB 8800, the jad/jar can be downloaded to the device, when run the game, there is a error msg "Error starting xxxx Module xxxx has verification error xxxx at offset xxxx", the version is OK on BB 8310, but failed on BB 8800 and 8300. I make the version by using proguard 3.8 and WTK22 preverify. I try RAPC preverify and failed again, use proguard 3.3.2 failed too.It seem that it is a compatible problem.
I check the article "Support - MIDlet has verification error at offset", and have no harvest.
BTW, the alx/jad/cod format works fine on BB 8800 and 8300.
How to fix the bug?
Thanks for your help.

Hello,
I gather for your lack of details that you are wanting to get an application that you have written working on the device?
Otherwsie can you specify the name of the application and the details of the error. Someone may have expericne with it.
Lacking this however, the software needs to be fixed.
You'll have better luck looking on the Java forums, not here...
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Server name message when triggering process chain through ABAP PROGRAM

Hi all,
When I am trying to execute one process chain with variant as a APD ( In this APD data is getting loaded form one Query to Transactional ODS.) This process chainis being executing through one ABAP program using the following code
CALL FUNCTION 'RSPC_API_CHAIN_SCHEDULE'
EXPORTING
I_CHAIN = 'XYZ'. ( Dummy Process chain name)
While executing this program I am getting following message :
You can specify the name of the application server here
on which all jobs in the chain are scheduled
If you do not specify a name, the jobs from batch
management are divided between the available servers
How to avoid this message.
Can we write any code in the above program to assign any fixed server name so that it will not ask for any server name.
Your help is much appreciated.
Thanks,
Uday.

Hi Shanthi,
How to write exception handling for this.
Quick reply is nedeed.
Thanks,
Uday.

What causes the "Invalid annotation object." error when trying to remove headers, footers from a PDF

using Acrobat X (10) Professional?
There are no layers, attachments, signatures, or security settings on the PDF.

Dear Siva
Thank you for your reply. I did not know that. Although I often use an alias, as I was just figuring out how to do the query I didn't do this.
Is this the case with many of the GeoRaster related select statements? Does anyone know the reasons why this needs to be the case?
Kind regards
Tim

Error when running ./netca after clone of oracle home

Hello,
Databas version : 11.1.0.7
OS version : RHEL 5.5
To clone oracle_home on the target system, followed the below steps.
1. Not ran adpreclone.pl on the source as i am doing only database oracle_home clone.
2. Sutdown database and listner of the source db, ziped oracle_home, moved it to target server.
3. Unzip the folder and ran the script clone.pl in the target system, clonning is successfull.
Now i need to configure connection using ./netca (not created database using dbca yet) getting below erros.
[orarman@devtest bin]$ ./netca
****DISPLAY environment variable not set!
Oracle Net Configuration Assistant is a GUI tool
which requires that DISPLAY specify a location
where GUI tools can display.
Set and export DISPLAY, then re-run.
So i have set display as
[orarman@devtest bin]$ export DISPLAY=192.168.1.6:0.0
If i run ./netca getting an below error
[orarman@devtest bin]$ xhost +
xhost: unable to open display "192.168.1.6:0.0"
and
xclock
Error: Can't open display: 192.168.1.6:0.0
[orarman@devtest bin]$ ./netca
Oracle Net Services Configuration:
java.lang.NullPointerException
at oracle.ewt.lwAWT.BufferedApplet.<init>(Unknown Source)
at oracle.net.ca.NetCA.<init>(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1
Please suggest..
Thanks ..
Edited by: 955685 on Sep 16, 2012 11:55 PM

Are you using putty to connect to the server or you are directly login into the server

Object Referenced Error When calling the Windows Form during Runtime

Hi,
I am getting Object reference errors when running windows form during runtime. In debugging mode in MS Visual studio 2005, I am not getting this error. I'm calling the window form from menu and called the window in a thread as suggested in one of forums . I don't see anyone in the forum mentioned this problem I have. Any help would be deeply appreciated. Below are the error and code samples.
ERROR Message
Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
   at Project1.Loadxml.Loadxml_Load(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Edited by: Albert Tio on Feb 16, 2011 9:55 AM

Here is the code.
Option Strict Off
Option Explicit On
Friend Class GetEvents
    Public WithEvents SBO_Application As SAPbouiCOM.Application
    Public SboGuiApi As SAPbouiCOM.SboGuiApi
    Public oForm As SAPbouiCOM.Form
    Public oDBDataSource As SAPbouiCOM.DBDataSource
    Public oCompany As SAPbobsCOM.Company
    Public RS As SAPbobsCOM.Recordset
    Public oPrev_Bank As String, oPrev_AcctType As String
    Public oLoadXml As Loadxml
    Public Sub SetApplication()
             'Dim SboGuiApi As SAPbouiCOM.SboGuiApi
        Dim sConnectionString As String
        SboGuiApi = New SAPbouiCOM.SboGuiApi
        ' by following the steps specified above, the following
        ' statment should be suficient for either development or run mode
        sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
        ' connect to a running SBO Application
        SboGuiApi.Connect(sConnectionString)
        ' get an initialized application object
        SBO_Application = SboGuiApi.GetApplication()
    End Sub
    Public Sub SetCompany()
        Dim ret As Long
        Dim MsgStr As String
        Dim Cookie As String
        Dim ConnStr As String
        Try
            oCompany = New SAPbobsCOM.Company
            Cookie = oCompany.GetContextCookie
            ConnStr = SBO_Application.Company.GetConnectionContext(Cookie)
            '//before setting the SBO login context make sure the company is not connected
            If oCompany.Connected = True Then
                oCompany.Disconnect()
            End If
            ret = oCompany.SetSboLoginContext(ConnStr)
            If Not ret = 0 Then
                Exit Sub
            End If
            ret = oCompany.Connect
        Catch ex As Exception
            SBO_Application.MessageBox(ex.Message)
        End Try
        MsgStr = ""
        If Not ret = 0 Then
            oCompany.GetLastError(ret, MsgStr)
            SBO_Application.MessageBox(MsgStr)
        Else
        End If
    End Sub
    Public Sub New()
        MyBase.New()
        ' set SBO_Application with an initialized application object
        SetApplication()
        SetCompany()
        AddMenuItems()
    End Sub
    Private Sub SBO_Application_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.MenuEvent
        Dim myThread As New System.Threading.Thread(New System.Threading.ThreadStart(AddressOf LoadXmlMainThread))
        Try
            If (pVal.MenuUID = "MySubMenu") And (pVal.BeforeAction = False) Then
                'SBO_Application.MessageBox("My sub menu item was clicked")
                '// Create a form to be launched in response to a click on the
                '// new sub menu item
                myThread.SetApartmentState(System.Threading.ApartmentState.STA)
                myThread.Start()
                'Loadxml.ShowDialog()
                            End If
        Catch ex As Exception
            SBO_Application.MessageBox("1." & ex.Message)
        End Try
        'If (pVal.MenuUID = "MyGoToMenu") And (pVal.BeforeAction = False) Then
        '    SBO_Application.MessageBox("My GoTo Menu was clicked")
        'End If
        'If (pVal.MenuUID = "MySecondGoToMenu") And (pVal.BeforeAction = False) Then
        '    SBO_Application.MessageBox("My Second GoTo Menu was clicked")
        'End If
    End Sub
    Private Sub LoadXmlMainThread()
        'Dim lLoadxml As New Loadxml
        Try
            oLoadXml = New Loadxml
            oLoadXml.WindowState = FormWindowState.Maximized
            oLoadXml.ShowInTaskbar = True
            oLoadXml.TopMost = True
            oLoadXml.Activate()
            Application.Run(oLoadXml)
        Catch ex As Exception
            SBO_Application.MessageBox("2." & ex.Message)
        End Try
    End Sub
    Private Sub AddMenuItems()
        '// Let's add a separator, a pop-up menu item and a string menu item
        Dim oMenus As SAPbouiCOM.Menus
        Dim oMenuItem As SAPbouiCOM.MenuItem
        Dim i As Integer '// to be used as counter
        Dim lAddAfter As Integer
        Dim sXML As String
        '// Get the menus collection from the application
        oMenus = SBO_Application.Menus
        'Save an XML file containing the menus...
        'sXML = SBO_Application.Menus.GetAsXML
        'Dim xmlD As System.Xml.XmlDocument
        'xmlD = New System.Xml.XmlDocument
        'xmlD.LoadXml(sXML)
        'xmlD.Save("c:
mnu.xml")
        Dim oCreationPackage As SAPbouiCOM.MenuCreationParams
        oCreationPackage = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_MenuCreationParams)
        oMenuItem = SBO_Application.Menus.Item("43520") 'moudles'
        Dim sPath As String
        sPath = Application.StartupPath
        'sPath = sPath.Remove(sPath.Length - 3, 3)
        If sPath.EndsWith("\") = False Then
            sPath = sPath & "\"
        End If
        '// find the place in wich you want to add your menu item
        '// in this example I chose to add my menu item under
        '// SAP Business One.
        oCreationPackage.Type = SAPbouiCOM.BoMenuType.mt_POPUP
        oCreationPackage.UniqueID = "MyMenu01"
        oCreationPackage.String = "Unbridle Menu"
        oCreationPackage.Enabled = True
        oCreationPackage.Image = sPath & "unbridle.bmp"
        oCreationPackage.Position = 15
        oMenus = oMenuItem.SubMenus
        Try ' If the manu already exists this code will fail
            oMenus.AddEx(oCreationPackage)
            '// Get the menu collection of the newly added pop-up item
            oMenuItem = SBO_Application.Menus.Item("MyMenu01")
            oMenus = oMenuItem.SubMenus
            '// Create s sub menu
            oCreationPackage.Type = SAPbouiCOM.BoMenuType.mt_STRING
            oCreationPackage.UniqueID = "MySubMenu"
            oCreationPackage.String = "Unbridle Monitoring"
            oMenus.AddEx(oCreationPackage)
        Catch er As Exception ' Menu already exists
            'SBO_Application.MessageBox("Menu Already Exists")
        End Try
    End Sub
End Class
Public Class Loadxml
    'Inherits System.Windows.Forms.Form
    Public sBPpath As String
    Public sGLpath As String
    Public sBillpath As String
    Public bRun As Boolean
    Private Sub Loadxml_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
        Me.TextGL.Text = System.Configuration.ConfigurationSettings.AppSettings("GLAcctDownloadPath").ToString()
        Me.TextBP.Text = System.Configuration.ConfigurationSettings.AppSettings("BPAcctUPloadPath").ToString()
        Me.TextBill.Text = System.Configuration.ConfigurationSettings.AppSettings("BillUPloadPath").ToString()
        Me.NotifyIcon1.Visible = False
    End Sub
End Class

Invalid DataStore object name error when running process chain after EHP1

Similar Messages

Maybe you are looking for