Invalid page fault (only on one computer)

I keep receving a whole set of invalid page fault errors when I try to open my VI.
It is strange because the VI works perfectly on another, less powerful, computer running the same OS (Win98) and same version of LV (6.1)
Does anyone have any advice?

What all is in your code? Are you doing anything with ActiveX? Which module does the fault occuring in? This is possible a hardware issue at this point. It is possible that this could be cause by faulty memory. A page fault is generated when errors occur while moving pages in between your system memory and virtual memory. Is this a very large application? Try running other large programs (large Word or Powerpoint documents, etc.) to see if you can reproduce the page fault there. Are there any other VIs that will generate this same fault? What other software do you have on your system?
Just a few guiding questions that might help determine were this page fault is generated.

Similar Messages

  • LabVIEW 4.0 Invalid Page Fault Errors

    I've got myself stumped on this problem - we had a LabVIEW based PC/DAQ system that started giving invalid page fault errors and crashing in Win95. This may have been concident with a revision to a vi file. To rectify the problem I've tried the following:
    1. Reinstall LabVIEW 4.0 with NI-DAQ 6.6
    2. Wipe HD, reinstall Win95, LV 40, NIDAQ 6.6
    3. Full HD scan and MEMTEST86 memory test
    4. Install on another PC
    The PCs are P5-60 Gateways with 128 MB of RAM. DAQ config is 1 AT-AO-10 and 1 AT-MIO-16DE-10
    Nothing seems to help. With a reinstall of LV40, I can get it to run, but once I copy the .vi files back into User.lib LV crashes.
    Does LV40 look in User.lib upon startup and crash if it finds something it doesn't like? A corrupted vi?
    Thanks!

    Blair Hogg wrote:
    ...guess the next step is to go in and load each .vi manually to see if there is one that is causing problems. Hopefully some of you out there are finding this somewhat interesting, and I'm not just cluttering up the forum...
    Hi Blair Hogg,
    I like your sence of humor ;-) Don't worry, even if nobody reads your
    thread (well... I just did) you need to write MUCH more for it to be
    considered clutter. Now, if you had created 25 duplicates of the same
    thread, then  we would be talking about cluttering...
    I'm curious about this issue even thought NI only supports LabVIEW two
    versions back - officially. My guess is that a VI is corrupted and
    kills LabVIEW when the VI loads. Therefore I do aggree that the
    procedure from now on is to load every single VI one by one and then
    notice what VI will make LabVIEW crash. I might be able to repair that
    VI if you submit it to the thread.
    Another thing to try is to mass compile the user.lib. The log after the
    mass compile will show if any VIs were bad or had problems getting
    compiled.
    Well, I hope you find the source for this issue - even if I'm the only one that cares ;-)
    Have Fun!
    - Philip Courtois, Thinkbot Solutions

  • Hotsync Crashes (invalid page fault) - address book

    Help - I know I have an old setup, but I really need help ...
    I'm trying to sync between a Samsung i500 and my win 98se computer using Palm desktop 4.1 and Hotsync Manager 4.0.4. It's been working great for YEARS but I did something and now it always crashes. I CAN'T update - I have a full office of these computers running software that CAN'T run on newer systems.
    I usually sync between REA (a little organizer program) and Palm and my phone, but that crashed so I EXPORTED the address database (in a comma delimited form) then brought up the database in Works and cleaned it out of comma's and any bad records I could find.
    I've tried uninstalling Palm Desktop AND doing a HARD reboot on my phone, then syncing with NO addresses.  That worked once.  But then when I imported the addresses in Palm Desktop, on the next HotSync it crashed again (invalid page fault). 
    My address book is about 10,700 records, I don't know if that is the problem.  HELP
    Post relates to: None

    No one replyed ... but I managed to call Palm One (866-751-7256) paid tech support.  Herb correctly pointed out article 24515 that points out a maximum of 10,376 records that can be synced.  So I need to (somehow) delete some records.  Then I'll try reloading software and syncing.
    Post relates to: None

  • How to open a pdf file only in one computer

    I would like to sell pdf publications by allowing  the user to open them only in one computer. I learnt that this has been done  the past when I bought  some publications but I don't know the way to do it. Could you help me?
    thank you
    Marco

    thank you for your support
    Best Regards
    Marco
    Da:     Mylenium <[email protected]>
    Per:    MARCO1 <[email protected]>,
    Data:   09/10/2013 11:09
    Oggetto:        How to open a pdf
    file only in one computer
    Re: How to open a pdf file only in one computer
    created by Mylenium in Downloading, Installing, Setting Up - View the full
    discussion
    You will havwe to sign up for some service that supports rights
    management, use protected PDFs via LiveCyle/ Acrobat Connect or learn how
    to create your own ePub stuff using Digital Publishing Suite. In any case,
    it will probably cost you money upfront before you make any revenue.
    Mylenium
    Please note that the Adobe Forums do not accept email attachments. If you
    want to embed a screen image in your message please visit the thread in
    the forum to embed the image at
    http://forums.adobe.com/message/5746873#5746873
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/5746873#5746873]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/5746873#5746873]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up at Adobe
    Community
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.
    Il messaggio trasmesso può contenere informazioni di carattere
    confidenziale rivolte esclusivamente al destinatario. Ne è vietato l'uso,
    la diffusione, la distribuzione o la riproduzione da parte di altre
    persone e/o entità diverse da quelle specificate. Nel caso aveste ricevuto
    questo messaggio per errore, siete pregati di segnalarlo immediatamente al
    mittente e cancellare quanto ricevuto.
    This electronic mail transmission may contain confidential information
    addressed only to the person(s) named. Any use, distribution, copying or
    disclosure by any other person and/or entities other than the intended
    recipient is prohibited. If you received this transmission in error,
    please inform the sender immediately and delete the material

  • Invalid page fault in module cvirte.dll

    I have updated two old programs using LabWindows 7.0 which were perviously created with an earlier version of LabWindows. I am having problems though updating a third program. I get an error stating...
    Characerization (the name of the program) caused an invalid page fault in the module cvirte.dll at 0167:684b77f5.
    The operating system that I am installing these program on is Windows 95.
    I'm not sure where this error is coming from but I'm assuming there might be a problem when I build with LabWindows 7.0 and install to Windows 95. But, the previous two programs updated before this one have had no problems at all. Any help is greatly appreciated.

    JuanCarlos,
    Thanks for you help. Since I have been getting this error, we did some system monitoring and noticed that when the system crashes, the CPU is running at 100%. It also crashes during debug mode as well. I have been putting in break points to specifically find a location. What we have come down to is that its writes the test information to a file, but crashes when the file is recalled within the program to process some results. As far as GPIB drivers, everything is correctly installed and since we are using old ISA slots, I have made sure there are no IRQ conflicts.
    The funny thing is...this exact program works perfectly fine on another station but crashes on this current station! We need both fully functional though.
    Is there a
    nything I should look for specifically to tell if its a GPIB problem? Anything specific for CVI problems?
    Thanks for you help!
    Paul

  • Invalid Page fault in IMM32.dll on Japanese Win 98

    Hi
    First of all, let me say that I'm new to internationalization fundamentals.
    My Java application uses i18n.jar for internationalization support(primarily Japanese) and everything seems to be fine on all OSes(Win2k,NT,98,Solaris etc), except that in particular menu options in Japanese version of Win98(m/c has MS-IME 98 running), a Windows fatal error pops up saying "Javaw caused a invalid page fault in module IMM32.dll". IMM32.dll, I understand, is the dll required for i18n support in Windows.
    This error comes up if we exit immediately after launching application or when trying to launch new windows for charts etc.
    Could you please suggest a workaround or a fix to this issue? What could be the root cause of the problem, I mean, does i18n.jar use the IMM32.dll, or is it just a conflict? Have there been other such cases?
    Thanks for all your advice in advance
    Regards
    Santosh

    If Javaw is causing the page fault, that's very much a bug in native code (i.e. Windows-only stuff) within the VM.
    Search through the bug database on this site, and you'll more than likely find a corresponding bug report for this if it's been around a while and is fairly easy to produce. If you can't find it, submit it - I'm sure the Sun guys would be concerned to hear that Javaw is crashing and burning.
    Hope that helps!
    Martin Hughes

  • How can I remove the Apple ID authorization only on one computer and authorize another in his place?

    how can I remove the Apple ID authorization only on one computer and authorize another in his place?

    De-authorize the computer in question.
    Then authorize the new computer.
    Or de-authorize all computers and authorize only the ones that actually exist.

  • Some of my songs in iTunes show up but they won't play. I get the message that my computer isn't authorized to play them when I only have one computer.

    I recently did the update for iTunes and after I did that I got the error message: MSVCR80.dll file not found.  I followed the suggestions from someone in this community to fix it and now some of my songs aren't playing.  And they are the ones that I purchased from iTunes not CDs that I have and ripped to my iTunes library. I can see the songs listed in my iTunes library as well as on my iPod but yet they won't play.  On my computer I get the message that this computer is unauthorized to play them and to authorize it.  I only have one computer, so I have no idea why I'm getting this message.  And does anyone have any suggestions as to how to get all of the iTunes songs to play again?

    Hello Angel82co,
    It sounds like you have some songs in your library that are not playing, and when you try to play them you are being told the computer is not authorized to play them. I would start by verifying that your computer is still authorized, and take note of the Apple ID that you sign in with:
    To authorize a computer, follow these steps:
    Open iTunes.
    Choose Store > Authorize This Computer from the menu bar.
    You may need to show the menu bar to see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
    Enter your Apple ID and click Authorize.
    If your Apple ID uses an expired MobileMe account, you can still authorize your computer.
    From: iTunes Store: Authorize or deauthorize your Mac or PC
              http://support.apple.com/kb/ht1420
    If the issue persists, next I would use the following article to double check that these songs were purchased under the same Apple ID you used to authorize the computer:
    Recovering a forgotten iTunes Store account name
    http://support.apple.com/kb/ht1920
    Open iTunes
    Highlight one of the items you have purchased (You can find your purchases in your Purchases playlist).
    Choose File > Get Info.
    Click the Summary tab.
    The Account Name area will list the account used to purchase the item. Unless you have changed accounts, this is your iTunes Store account name.
    If it is the same Apple ID then I would next delete the song, and re download it from your purchased history, with this article named:
    iTunes 11 for Windows: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12491
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • JAVA caused an invalid page fault in module KERNEL32.DLL at 016f:bff7b9a6

    Hi All,
    This problem is bugging me for last two days. Actually I am trying to embed Internet Explorer inside Java application. Everything is working fine till I dont close the application window. But just when I close the window everything goes down. I am working on win98 platform and not sure if it is this reason. The exact error message I am getting is:
    JAVA caused an invalid page fault in
    module KERNEL32.DLL at 016f:bff7b9a6.
    Registers:
    EAX=00000000 CS=016f EIP=bff7b9a6 EFLGS=00000246
    EBX=00000001 SS=0177 ESP=0c08fb7c EBP=653cfbd0
    ECX=004271ec DS=0177 ESI=653cfbd0 FS=443f
    EDX=00427310 ES=0177 EDI=0042701c GS=0000
    Bytes at CS:EIP:
    ff 76 04 e8 13 89 ff ff 5e c2 04 00 56 8b 74 24
    Stack dump:
    004272e4 653a8f88 653cfbd0 0042701c 004272e4 004271fc 00000000 653aaf7b 0042701c 0b1df32c 5f3ed308 0c08fc70 00000000 5f3e5adc 004272e4 5f3ed6d8
    Also since JVM is also crashing it is creating a log file which reads:
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x6D0670CD
    Function=[Unknown.]
    Library=(N/A)
    NOTE: We are unable to locate the function name symbol for the error
    just occurred. Please refer to release documentation for possible
    reason and solutions.
    Current Java thread:
         at sun.awt.windows.WToolkit.eventLoop(Native Method)
         at sun.awt.windows.WToolkit.run(WToolkit.java:240)
         at java.lang.Thread.run(Thread.java:536)
    Dynamic libraries:
    0x7CC00000 - 0x7CC1D000      C:\WINDOWS\SYSTEM\IMAGEHLP.DLL
    Local Time = Tue May 14 18:46:45 2002
    Elapsed Time = 616
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.4.0-b92 mixed mode)
    I am not getting any clue about this error. Please help me out. :-(

    aman ghus jao bans balli bamboo lekar..

  • F50DBG32 caused an invalid page fault in module MSVCRT40.DLL at 0167:7967d7f0.

    HI all,
    I trying to run a multi-tabbed form built in forms 5.0 with Oracle 8.1.7 db running on a solaris m/c.
    The client m/c os is windows '98.
    but when trying to run it, i get the following error:
    F50DBG32 caused an invalid page fault in
    module MSVCRT40.DLL at 0167:7967d7f0.
    Registers:
    EAX=796aadff CS=0167 EIP=7967d7f0 EFLGS=00010286
    EBX=00aef3f4 SS=016f ESP=00aef284 EBP=00aef290
    ECX=008e56c0 DS=016f ESI=00357365 FS=586f
    EDX=0000001f ES=016f EDI=008e579c GS=0000
    Bytes at CS:EIP:
    8a 06 46 8a 27 47 38 c4 74 f2 2c 41 3c 1a 1a c9
    Stack dump:
    00aef3f4 00aef43c ffffffff 00aef2a8 617e7573 008e579c 00357365 008e56c0 008e56a8 00aef3a8 617d8bae 0101343c 008e56c0 00aef43c 00000001 00aef3f4
    . The problem is tat the same form runs fine in a Win-NT machine.
    Unfortunately, we have a mixed group of users for this form. some of them have NT and some others have Win95/98...
    Any help?
    Regards
    -Sree Ram

    Hi all,
    Found the prob' or atleast the workaound for this...
    APart from setting the fill property of the canvases to Transparent, set the same for all the DB blocks too...
    Now my form is working fine in both OS.
    Regards
    -Sree Ram

  • I only have one computer assigned to our ID and am trying to authorize my other computer for home share but it keeps telling me to deauthorize other computers.  we do not have any other computers hooked up to the account.  how do i get past this?

    i only have one computer assigned to our ID and am trying to authorize my other computer for home share but it keeps telling me to deauthorize other computers.  we do not have any other computers hooked up to the account.  how do i get past this?

    Understanding Home Sharing
    Troubleshooting Home Sharing

  • Invalid Page Fault Error

    I an running PLUS80W on a P3 1GHz machine and
    when I start up the SQL Plus 8.0 application I get an invalid page fault in ORA805.dll
    If I use forms6i or reports 6i no problems.
    Is this a known problem and how do I solve it.
    Thanks
    null

    This sounds like a problem to work with Oracle Support on.
    - CJ

  • Invalid page faults

    Good day. I am attempting to install 8i Lite on an HP Kayak XA.
    It is a pentium based box with 32 mb ram and adequate disk.
    When I run the 8i install it presents the background grey screen
    and then it says;
    An Invalid Page Fault has occurred in module OIBKND32.DLL and
    will terminate, (or quit or whatever it says at the end). Anyway
    it dies.
    If you have any ideas on this please let me know. I have
    rebooted and powered off and on just in case and to no avail.
    Eric,
    null

    Yes I also have the same problem.
    In the meantime, do you have any solution for this. Please reply to me.

  • _INS5567 caused an invalid page fault in module PFMODINTL.DLL at 0167:01651

    Can someone help me with this I had to reinstall windows 98se and because of that I had to reinstall the drivers for my sound blaster pci28 sound card and that error comes up every time it trys to install the drivers for it, it happens when it gets to the 00% mark of the setup for the installation. This is the full error's details.
    _INS5576 caused an invalid page fault inmodule PFMODINTL.DLL at 067:065e0.
    Registers:EAX=005b0000 CS=067 EIP=065e0 EFLGS=0000202EBX=003037 SS=06f ESP=006bf78c EBP=006bfcb8ECX=2000690 DS=06f ESI=00000000 FS=447EDX=006bf7a8 ES=06f EDI=00000000 GS=0000Bytes at CS:EIP:8b 08 52 56 50 ff 5 40 85 c0 7c 0a 39 5c 24 44 Stack dump:006bf7dc 006bf7a4 00000000 00000000 005b0000 0980c20 00000000 0700000 006bf7d0 0044790 0054afc2 00000004 00040005 0054ad8 00440004 003037
    please if you can help me with this please do thank you.

    Hi all,
    Found the prob' or atleast the workaound for this...
    APart from setting the fill property of the canvases to Transparent, set the same for all the DB blocks too...
    Now my form is working fine in both OS.
    Regards
    -Sree Ram

  • NIMAX caused an invalid page fault in module PDM.DLL at 0167:4a01259d

    When I closed the MAX 2.2 and get the following problem~~
    NIMAX caused an invalid page fault in
    module PDM.DLL at 0167:4a01259d.
    Registers:
    EAX=00000000 CS=0167 EIP=4a01259d EFLGS=00010246
    EBX=00761f04 SS=016f ESP=022cfe44 EBP=00000000
    ECX=007700b0 DS=016f ESI=00781a10 FS=3f87
    EDX=00000004 ES=016f EDI=00761ef4 GS=0000
    Bytes at CS:EIP:
    8b 10 ff 52 08 83 c6 04 eb c9 53 ff 15 f4 00 02
    Stack dump:
    00000000 00849070 00761ee8 00000001 4a01275a 00761ee4 00849070 00000000 4a012fed 00761ee8 4a012b06 0084a020 00000000 00000000 00000000 00760630
    Can anyone help me to solve this problem?

    Hello Ivan ,
    Thank you for your inquiry regarding problems closing MAX 2.2. It sounds like MAX crashes causing an invalid page fault in module PDM.DLL. This problem can happen when Microsoft Visual Studio is installed. The following link is a great resource when dealing with this issue.
    http://digital.ni.com/public.nsf/websearch/1F1B0B6A05772B6A86256BC1005634D3?OpenDocument
    Other resources similar to this can be found on the ni.com website by clicking the support tab at the top of the home page. Then search for �PDM.DLL� from Technical Resources at the top of the page or topics similar to this. I hope these resources help. Let me know if I can further assist you.
    Shea C.
    Applications Engineering

Maybe you are looking for

  • I want to send data from One server to another

    Hi all, My requirement to send data from one server's  application server path(data in one directory in Al11 of the source server) to another server's application server(TO another directory in Al11 transaction of the destination server). What are al

  • How to map between child objects in a Siebel Data Map

    Hello. I need to map a field from one child object to another child object using a Siebel Data Map. Specifically, I have an Integration Object set up for FINS Group Policy with 2 child components (Action and Proposal). I want to map the Proposal's na

  • How to avoid the repeated Print window, for range printing in a smartform

    Hi I developed one smartform for the single/multiple Outbond deleviry.  When I execute the query with same range then print window opened and after click print button Document priented. But when I try to execute the query with range suppose 0001 to 0

  • How to expdp and impdp in oracle 10g

    i want to expdp data from user.how to follow the steps.please give me steps.

  • Links in database

    I am trying to find out if it is possible to set up links in database (Appleworks 6), and if so, how. Right now, the links screen pops up, but won't actually let me do anything. Any suggestions?