Invalid Region Changes??

I've been trying to load a song I recorded and saved, but for some reason I get an error message during the load that says "2 invalid region(s) changed." When the song opens two of the instruments are missing. The actual tracks and all the settings are still there, but the recordings are not. I've searched everywhere on my computer, but I can't find them. I'm very disappointed because everything was sounding so good. Please help me figure out what went wrong and how I can get these recordings back. Thanks.

See if you can recover the recordings from the project package:
http://www.bulletsandbones.com/GB/FAQPages/AIFFsStored.html

Similar Messages

  • One invalid regions changed! what does this alert mean?

    when I open one of my sessions I get an alert saying "1 invalid regions changed!" then i have to click ok to get rid of it. I also get other ones saying audio files missing and i have to click ok to continue. Im just wondering how to get rid of these and what understand what they mean.

    It means between quitting your project and opening it again something has changed about your audio files. You may have edited or renamed or relocated them, or renamed the folder they were in, or renamed the disk they are on etc., or OSX may have renamed longer-than-31-characters-filenames to something usercryptic.
    Or the Logic Song is becoming corrupted.
    regards, Erik.

  • Invalid Regions Changed

    Hi all,
    Any help here would be appreciated. I have a song that when I open it now I get the error message, "23 invalid regions changed". When I play that song I don't get my original audio clips but they have been replaced by other audio clips from a different song.
    Any advice on how to get my original clips back?
    Thanks.

    Something's terribly messed up with these two songs. Your first thing to try is to recover the audio files from the original song:
    http://www.bulletsandbones.com/GB/FAQPages/AIFFsStored.html
    (Hope you didn't save the song in the meantime!)

  • Invalid regions

    Hi all ...here's a new one ( at least for me ...)
    Opened a project folder and 143 invalid regions were moved ( that' the actual message text in lp7.1..).So instead of the drums ( 5 audio tracks .... 4 were spared ) an exact copy of the voice and guitar are playing back now...offset of course .
    ALL Other tracks remained unchanged. Only the top 5 changed.
    Any thoughts ?
    Everything was saved on a single folder with audio files in it ( they are still there...) .
    Nothing strange was done to my project, no power loss, only a couple of force quits but not with this project open, another one was open and it appears to be fine.
    I replaced the audio files, saved the project under xxx2.iso and when I opened it for the second time ... AGAIN ...65 invalid regions were moved ....
    I have no Idea what I might have done this time ...
    Any help is appreciated Thanks
    Sergio

    hi sergio i ran into the same problem couple times with different songs never had as many invalid regions changed as in your case but i had like 2 or 4 or max at 6 . this was very annoying where a different part played in place of that region and i had to re record some parts. I looked in the audio recordpath folder for that song and the audio file was never there to be found. you were lucky you still had the audio files . mine just vanished . i did not erase them in another song because i never deleted audio files in the first place. But i am getting nervous to work with Logic express 7.1. if it keeps saying invalid regions changed after a day when it was fine the day before and i have'nt done anything weird with the disks. If you got anyideas or work arounds. it would be very helpful.. of course now i am saving projects and copying everything and renaming any new audio files going in to songs.

  • Invalid Region(s) Changed !!!

    I am trying to share Garageband sessions with my musician Buddy via mobile me (iDisk). He'll upload a project, archived and compressed, no bigger than 30 mb. I'll then copy & paste it to my drive, open it in GB, maybe add a track or two, save it under a different name archived & compressed then when I try to copy and paste it to my iDisk I get (Error - 36) something about certain files cannot be read or written. That's one issue.
    Here's my main problem.
    I will work on a New GB project w/ several tracks involved. Save it to my drive, not archived or compressed, open it later and work a little more with no problems. I will then save a version for my buddy, archived and compressed under a different name to be uploaded to my iDisk for him to download. Before i even attempt uploading, I will reopen that archived version immediatly and receive a warning that "3 invalid region(s) have been change." He gets this message after he downloads it and opens it. Then he is unable to upload his version due to what I discussed prior. (ERROR - 36) What is that?! I've been doing this for sometime now prior to Leopard. Could it be Leopard?

    That sounds like a very good idea — but make sure everything is backed-up first (since of course when you re-format a disc you lose all the data on it).
    I'm surprised you were able to record to the disc in the first place! Perhaps you didn't use it to record onto, but simply copied the files onto it from somewhere else?

  • INVALID REGION(S) CHANGED!!!!!!!!Help

    Since two weeks....sometime when I open some sessions a window say "invalid region(s)changed".....result: some audio tracks lost! (definitively lost also in the audio window!!)...or some tracks move or change position.
    I can find a solution....it did not happened since several years as a Logic user.
    What can I do?...maybe my new external U.S.B. Packard Bell hard disk (500gyga) don't work well with mac?
    Help

    That sounds like a very good idea — but make sure everything is backed-up first (since of course when you re-format a disc you lose all the data on it).
    I'm surprised you were able to record to the disc in the first place! Perhaps you didn't use it to record onto, but simply copied the files onto it from somewhere else?

  • Why is there a limit on the number of times a "DVD player region" can be changed, and can it be adjusted for more region changes, or an indefinite number of region changes?

    Why is there a limit on the number of times a "DVD player region" can be changed, and can this numbert be adjusted for more region changes, or an indefinite number of region changes?

    Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
    http://support.apple.com/kb/HT2397
    Once you have set the region in DVD Player five times it cannot be changed.
    Instead, use VLC to view videos from different regions:
    http://www.videolan.org/vlc/download-macosx.html

  • Query Region - Changing "Go" Button

    Using JDeveloper 10.1.3.3 with R12.
    I was going through the tutorial and I completed the "Search" tutorial. After I was done, I wanted to customize it and play around with it and I'm trying to change the "Go" button to something different, but I can't seem to find where to change the text of the button.
    I guess because when you tell it to make a query region and search panel etc it automatically puts in those buttons? But how do I change the text of the buttons.
    Thank you in advance.
    Edited by: Pierre on Jun 14, 2012 12:09 PM

    Pierre,
    Yes this is possible. The trick here is to not start with the webBean, but the OAPageLayoutBean. Also you need to attach this controller as the controller of the table beneath your query region so that when it is called, the GO button exists.
    Here is the code (presume simpleSearchRN is the name of your query region, change to match your query region name):
    OAPageLayoutBean pl = (OAPageLayoutBean) pageContext.getPageLayoutBean();
    OAQueryBean qb1 = (OAQueryBean)pl.findChildRecursive("simpleSearchRN");
    OASubmitButtonBean sb = (OASubmitButtonBean) qb1.findChildRecursive(qb1.getGoButtonName());
    sb.setText("SmartyPants");
    Hope this helps.
    Kristofer Cruz

  • Error 70001 when changing DVD region (changes still allowed)

    I still have allowable DVD region changes left on DVD player, but when I try to apply a region change, error message 70001 appears.
    Does anybody know how to solve this problem? I've looked on various online forums and tried using VLC - but this doesn't work - and used MacTheRipper to no avail either.

    Are you sure the DVD is region 1 ONLY? You can't always trust the label. I have a three DVD boxed set that says region 1. One of the DVDs is multiple region.
    <http://docs.info.apple.com/article.html?artnum=31304>

  • DVD region change isn't needed anymore?

    When i first got my macbook pro i set the dvd region to 4 not allowing to play some of my dvds which were region 1 which was fine as i didn't want to use up 1 of the 5 times to change the region.
    I only watched region 4 dvds and whenever i inserted a dvd with region 1 the screen came up asking if i wanted to change the region so i could play the dvd, i always declined.
    I recently got dvds which are region 4 and they are also region 'all'.
    I then got a new dvd which was region 1 and i thought i would just try it out and i put it in and it automatically started playing and the screen never came up asking me to change my region.
    I thought it would be just that dvd but now all my other region 1 dvds work as well.
    I thought maybe i did accidentally change it to region 1 but my region 4 dvds also work without asking me to change the dvd region.
    I was wondering if by doing this, if it is still using up the 5 changes allowed?
    Or if it isn't as the screen is not coming up anymore and that i'm free to play any dvd now?

    wayne.jensen,
    you could download, install, and run DVD Info X 3 to find out the region change status of your SuperDrive.

  • Keynote is not free in Mac Appstore after Region Change

    Hello
    The following issue. MacBook Pro 13 Retina (Late 2013) was activated when I was still in the Austrian Appstore.
    Due to temporary loacation change, I've switched to the Russian Appstore.
    Pages, Numbers downloaded just fine, while Keynote is priced at ca. 15 USD (or 20 USD with old exchange rate).
    Logistically, this is nonsense because Late 2013 MBP ships with iWorks for free.
    Problem sits somewhere in the store change routine.
    NB: on iPad and iPhone, Keynote is free (!!!!) despite the region change
    Can someone help?
    Thanks!
    Yakor

    Please don't type in all capital letters. It makes your post harder to read.
    Have you checked the Applications folder to see if the programs are there? If they are, drag them to Launchpad.

  • Region Change from UAE to America??

    Hi everyone! I have been thinking of buying an iPhone 5c (or 5s I haven't made a decision yet) in the United Arab Emirates, but the thing is that the phones here don't have FaceTime, not that that's that big of a deal for me, but I am going back to the United States in June. I talked to a friend who told me that one she took her phone to the states it was harder for her to hold on to her 4G and she kept getting the E symbol on the top left of her phone. Now I am not sure if it is because of the phone itself or the carrier (T-Mobile) but were I to buy a phone here, I would like to be assured that my phone wont have many problems going back to the states. I would like to buy a phone soon as the phone I am currently using is garbage and I can not stand it a second longer. So basically my questions are 1. Will my phone be slower in the United States because of the region change and what are the other problems I might face? and 2. Is there ever a way to get facetime on my phone? (1 is more important than 2) Thank you for your time and help.

    If you buy one from Du or Etisalat, it will be closed for use only in their networks. I bought a factory unlocked 5S from the US, no problems at all using it in Dubai, UK, France. Don't know if it was because I bought my 4S in Dubai or the model itself, but it would not work with my foreign SIMs and service was extremely dodgy outside of the UAE with my UAE chip. In short, I think you should wait...

  • Original regions change like copie!

    Hi there, I'm stuck with a problem: when I change a copied region (eg length), the original region changes as well! This also happens when I re-load the file from the audio window. Does anybody know how to solve this?
    iMac G5/10.3.9/1.8ghz/768Mb     I'm stuck

    sorry, or add a bit of silence from another region (file) and glue them together then select create (when asked) for a new file.

  • Only 3 region changes left?! Didn't flash anything!

    Hi all!
    Title says it all: since I'm experiencing SuperDrive issues (see my topic: http://discussions.apple.com/thread.jspa?threadID=1914325&tstart=0 ), I've tried, so far unsuccessfully, to bring my SD back online. Thought about re-flashing the firmware, so I downloaded a firmware that's supposed to let me read all kinds of DVD, regardless of the region they're designed to. My thinking was, maybe if I flash the firmware, it would bring my drive back to life; I don't much care about reading DVDs from other continents, mind you.
    I read on various forums that a small application called DVD InfoX could tell me more about the reading abilities of my DVD drive, so I downloaded it and ran it; aside from the fact that it sends my CPU into overdrive (don't ask why, I dunno), it tells me my DVD drive can only experience three more region changes (before what? it get confiscated...?), out of the authorized four.
    How come, since I haven't flashed my firmware yet?

    It has nothing to do with the changing the firmware. If you insert a DVD that has a different region code than the MBP is currently set to it will ask if you want to change the region code. If you agree, it is changed and the count is reduced. If it is not currently set to your home region code or the region code that you want to use permanently, I suggest that you insert a DVD for your preferred region and change the MBP to your preferred region. Then never insert a DVD from a different region in the future.

  • All the applications gone after region change.

    Hi,
    I'm just wondering why there is no warning or something for the user who is changing his accounts region settings?
    Everithing he purchased before will be lost and I guess it is important enough to be underlined once again during the region change
    It doesn't seem fair that user would need to buy everithing once again and is not warned about that even with a single word.
    The procedure is the following now:
    - user opens his account information
    - user checks information and realises that it is not correct now because he moved lets say from Russia to Poland.
    - user changes the region using the information about his new credit card (Itunes crashes during this procedure, but maybe it is OK :/ )
    - all the application are gone.
    - PROFIT (but not for the user of course).
    It is easy to guess that this user was me
    If I had been warned somewhere in the middle I wouldn't change the region of course, I would rather create new account for Poland.
    But who cares about the user, right?

    Im having the same issue. It didnt happen right after the update. I updated at 1pm and it happened at 9pm. My memory is still there for them when i plug it into iTunes but the memory is now under "other" instead of apps.

Maybe you are looking for

  • How do I transfer all music and apps to my new gen 5 touch?

    My old touch is gone and now I have a new touch 5 but all the music and apps I have purchased I can't figure how to get on my new touch?

  • How do I UNINSTALL my CS4(Vista) from my WIN 8 NEW PC? It wont INSTALL, and NOW wants me to PAY TO UPGRADE to UNINSTALL.

    I purchased CS4 back when. And I never had any problems running it on my laptop (Vista). I finally used up all my 250gb hard drive and my husband just bought me a new WIN 8 desktop. I tried INSTALLING using my CD but WIN 8 wouldnt allow me to install

  • Vendor master record TITLE_MEDI

    Hi all, I would like to add one entry to TSAD3T-TITLE_MEDI (Vendor master record). There is a previous thread on the subject but I have no access to SAP Netweaver: [SAP ERP - Logistics Materials Management (SAP MM); Is there another way to customize

  • Add new input field in vendor master

    Hi all, I need to add a couple of <b>new columns</b> to the "Alternative payee" screen in the vendor master (screen <b>SAPMF02K 1130</b>). Is this possible? Can I use a BADI, or maybe an enhancement/user exit? Thanks for all your replies, answers wil

  • FlashVars not working in CS3 anymore?

    Ok, I'm at the end of my patience and is considering to bring ducktape, some napalm and a lot of matches to this party. I'm using Flash CS3 on a Vista Ultimate box that has Appserv installed (PHP4, MySQL and Apache). I am trying to send some data fro