Invalid regions

Hi all ...here's a new one ( at least for me ...)
Opened a project folder and 143 invalid regions were moved ( that' the actual message text in lp7.1..).So instead of the drums ( 5 audio tracks .... 4 were spared ) an exact copy of the voice and guitar are playing back now...offset of course .
ALL Other tracks remained unchanged. Only the top 5 changed.
Any thoughts ?
Everything was saved on a single folder with audio files in it ( they are still there...) .
Nothing strange was done to my project, no power loss, only a couple of force quits but not with this project open, another one was open and it appears to be fine.
I replaced the audio files, saved the project under xxx2.iso and when I opened it for the second time ... AGAIN ...65 invalid regions were moved ....
I have no Idea what I might have done this time ...
Any help is appreciated Thanks
Sergio

hi sergio i ran into the same problem couple times with different songs never had as many invalid regions changed as in your case but i had like 2 or 4 or max at 6 . this was very annoying where a different part played in place of that region and i had to re record some parts. I looked in the audio recordpath folder for that song and the audio file was never there to be found. you were lucky you still had the audio files . mine just vanished . i did not erase them in another song because i never deleted audio files in the first place. But i am getting nervous to work with Logic express 7.1. if it keeps saying invalid regions changed after a day when it was fine the day before and i have'nt done anything weird with the disks. If you got anyideas or work arounds. it would be very helpful.. of course now i am saving projects and copying everything and renaming any new audio files going in to songs.

Similar Messages

  • Invalid Region(s) Changed !!!

    I am trying to share Garageband sessions with my musician Buddy via mobile me (iDisk). He'll upload a project, archived and compressed, no bigger than 30 mb. I'll then copy & paste it to my drive, open it in GB, maybe add a track or two, save it under a different name archived & compressed then when I try to copy and paste it to my iDisk I get (Error - 36) something about certain files cannot be read or written. That's one issue.
    Here's my main problem.
    I will work on a New GB project w/ several tracks involved. Save it to my drive, not archived or compressed, open it later and work a little more with no problems. I will then save a version for my buddy, archived and compressed under a different name to be uploaded to my iDisk for him to download. Before i even attempt uploading, I will reopen that archived version immediatly and receive a warning that "3 invalid region(s) have been change." He gets this message after he downloads it and opens it. Then he is unable to upload his version due to what I discussed prior. (ERROR - 36) What is that?! I've been doing this for sometime now prior to Leopard. Could it be Leopard?

    That sounds like a very good idea — but make sure everything is backed-up first (since of course when you re-format a disc you lose all the data on it).
    I'm surprised you were able to record to the disc in the first place! Perhaps you didn't use it to record onto, but simply copied the files onto it from somewhere else?

  • INVALID REGION(S) CHANGED!!!!!!!!Help

    Since two weeks....sometime when I open some sessions a window say "invalid region(s)changed".....result: some audio tracks lost! (definitively lost also in the audio window!!)...or some tracks move or change position.
    I can find a solution....it did not happened since several years as a Logic user.
    What can I do?...maybe my new external U.S.B. Packard Bell hard disk (500gyga) don't work well with mac?
    Help

    That sounds like a very good idea — but make sure everything is backed-up first (since of course when you re-format a disc you lose all the data on it).
    I'm surprised you were able to record to the disc in the first place! Perhaps you didn't use it to record onto, but simply copied the files onto it from somewhere else?

  • One invalid regions changed! what does this alert mean?

    when I open one of my sessions I get an alert saying "1 invalid regions changed!" then i have to click ok to get rid of it. I also get other ones saying audio files missing and i have to click ok to continue. Im just wondering how to get rid of these and what understand what they mean.

    It means between quitting your project and opening it again something has changed about your audio files. You may have edited or renamed or relocated them, or renamed the folder they were in, or renamed the disk they are on etc., or OSX may have renamed longer-than-31-characters-filenames to something usercryptic.
    Or the Logic Song is becoming corrupted.
    regards, Erik.

  • Invalid Region Changes??

    I've been trying to load a song I recorded and saved, but for some reason I get an error message during the load that says "2 invalid region(s) changed." When the song opens two of the instruments are missing. The actual tracks and all the settings are still there, but the recordings are not. I've searched everywhere on my computer, but I can't find them. I'm very disappointed because everything was sounding so good. Please help me figure out what went wrong and how I can get these recordings back. Thanks.

    See if you can recover the recordings from the project package:
    http://www.bulletsandbones.com/GB/FAQPages/AIFFsStored.html

  • Invalid Regions Changed

    Hi all,
    Any help here would be appreciated. I have a song that when I open it now I get the error message, "23 invalid regions changed". When I play that song I don't get my original audio clips but they have been replaced by other audio clips from a different song.
    Any advice on how to get my original clips back?
    Thanks.

    Something's terribly messed up with these two songs. Your first thing to try is to recover the audio files from the original song:
    http://www.bulletsandbones.com/GB/FAQPages/AIFFsStored.html
    (Hope you didn't save the song in the meantime!)

  • Java.lang.IllegalStateException:Attempt to validate already invalid Region

    Hi,
    i am using jdev 11.1.1.2
    I am working in region, I drag drop the table and so on.Suddenly i start getting this error -”java.lang.IllegalStateException: Attempt to validate an already invalid RegionSite”.
    any idea how to solve it.

    check all these points..
    - Check all bindings of page. if you not able to find it then delete it and create again.
    - Add the “-Djbo.debugoutput=console” in JAVA options of the Run/Debug/Profile to see the error
    - Check if all the library references for the UI project are proper and that is also accessible.

  • Please help.....error message "4 invalid region(s) changed!"

    i received this message when i opened a song i was working on in garageband. the last time i worked on it i saved my changes like i always do and everthing was fine. then i open it today and get this message. when i click ok and the file opens many of the tracks are in the wrong spot and/or on the wrong channels...any help would be greatly appreciated....thanks

    I only experienced this once, a couple of years ago, on a project where I really pushed things (basically it was three separate projects pieced together into a fourth).
    I spent several days trying to track down the cause/fix, and after three days admitted defeat and salvaged what I could from previous iterations and re-did what I had to. 
    <hr width="250" align="left">
    HangTime [Will Compute for Food] B-(>
    ♪♫ The Bullets and Bones Band ♫♪
    Disclaimer<hr width="250" align="left">

  • What is this "6 invalid region(s) changed!" crap?

    and why is deleting my track and replacing it with bits and pieces of another one? and why when i try to re-copy the same track from somewhere else and pasted it does it paste something completely different from what i copied, and is actually bits and pieces of something from somewhere else? what bunk.

    I get this and its very annoying. If you change an audio file within one project, say in one .ISO and then save as a different .ISO, just the .ISO is changed but both .ISO's are still getting their audio from the same folder. Hence, if you change an audio file within one song, it'll change it in the other and you get that messsage. The workaround is to save the audio as a copy. That way, you can alter one version without affecting the other. Definitely not efficient.

  • Time zone region not found

    Hai All,
    I m using 11g JDeveloper. I am facing one problem while running one sample program, which has been downloaded from the net.Error is - "Time zone Region not Found" Where I can set the Time zone property?
    Could u please help me to solve this error.
    Thanks in advance
    Jithesh
    Edited by: Jithesh on Feb 3, 2009 6:18 PM

    From Oracle Messages 'Cause and Action'
    http://www.oracle.com/technology/products/designer/supporting_doc/des9i_90210/cmnhlp72/messages/ora_messages.htm
    ORA-01882, 00000, "timezone region %s not found"
    Cause: The specified region name was not found.
    Action: Please contact Oracle Customer Support.
    Maybe invalid region in NLS_LANG?
    "select * from v$nls_parameters"
    Starting this script in all developer program and compared result...

  • Trying to query data from a view - ORA-01882 and ORA-02063 Errors

    Hey there,
    I tried to query data from a view that was provided by a colleague. This view works fine and gives correct data using PL/SQL Developer or SQLPLUS, but in SQL Developer, I get the following error:
    ORA-01882: Time zone region not found
    ORA-02063: preceding line from SYSTOOLS
    01882.00000 - "timezone region %s not found"
    * Cause: Specified reason name was not found
    * Action: Please contact Oracle Customer Support
    Vendor Code 1882
    Where comes this error message from?! SYSTOOLS is the database link.
    Can't see an obvious reason for this error.
    OS is Windows 2000 SP4, SQL Developer is v1.1.1.25 BUILD MAIN-25.14
    Regards,
    Thomas

    From Oracle Messages 'Cause and Action'
    http://www.oracle.com/technology/products/designer/supporting_doc/des9i_90210/cmnhlp72/messages/ora_messages.htm
    ORA-01882, 00000, "timezone region %s not found"
    Cause: The specified region name was not found.
    Action: Please contact Oracle Customer Support.
    Maybe invalid region in NLS_LANG?
    "select * from v$nls_parameters"
    Starting this script in all developer program and compared result...

  • Creating row in a recursive view having read-only attribute

    Hi All,
    I am using Oracle JDeveloper 11g Release 2.
    I have a view AppMenusVO with the participation of following entities:
    1. AppMenusEO *(Updateable)* with columns like MenuId, MenuName, MenuIcon, MenuParentId, MenuTaskflowId
    2. AppTaskflowsEO *(Reference)* with columns as TaskflowId, TaskflowName, and TaskflowURL
    3. AppMenusEO as ParentMenus *(Reference)* with columns as ParentMenuId, ParentMenuName
    Next I created a One..Many view link where source and destination entity is the AppMenusVO based on relation (MenuId=MenuParentId). The name of the view accessor is MenuChildren.
    This view is used to create af:treeTable component on the adf page. In order to create new row I am following the blog entry at http://jobinesh.blogspot.com/2010/05/crud-operations-on-tree-table.html.
    I created a business method in the application module with the following specification:
        public void createMenuChildren(RowIterator ri, Key selectedNodeKey) {
            if (ri != null && selectedNodeKey != null) {
                Row[] found = ri.findByKey(selectedNodeKey, 1);
                if (found != null && found.length == 1) {
                    System.out.println("Node found for : " + selectedNodeKey + " Parent Id : " +
                                       found[0].getAttribute("MenuParentId"));
                    Row foundRow = found[0];
                    RowSet childRows = (RowSet)foundRow.getAttribute("MenuChildren");
                    while (childRows.hasNext()) {
                        Row r = childRows.next();
                        System.out.println(r.getAttribute("MenuName"));
                    Row childrow = childRows.createRow();
                    childrow.setAttribute("MenuParentId", foundRow.getAttribute("MenuParentId"));
                    childRows.insertRow(childrow);
                } else {
                    System.out.println("Node not Found for " + selectedNodeKey);
        }When I invoke this method from the adf page it is giving the exception An attemp is made to validate an already invalid region site.
    The Jdeveloper console is also throwing the exception oracle.jbo.ReadOnlyAttrException: JBO-27008: Attribute ParentMenuName in view object AppMenusVO_MenuChildren_ParentMenusVL_AppMenusVO cannot be set.
    I searched Google and OTN but unable to resolve the error.
    The solution I have tried are:
    The default activity on the BTF is marked and is pointing to a valid view.
    Set the activation property of region to immediate ... etc.
    BUT the issue persists.
    Any help to create row programmatically in recursive view where some of the attributes are read-only?
    Thanks in advance
    Best Regards
    Bilal

    Hi Frank,
    Thanks for the response.
    The updateable property of ParentMenuName attribute is Never and is being disabled so I am unable to change its value. Moreover, never in my code I am changing value of this field. What I am doing is trying to create a new row and then insert it into rowset. I don't know how to proceed further.
    One more thing is that I have an LOV on another column MenuParentId which returns value in this field as well. It might be the reason? ...
    Any help will be highly appreciated.
    Thanks
    Regards
    Bilal

  • 10.6.7 Update Combo failed to install. Please help!

    I have a MacBook Pro that is currently running the 10.6.4 Mac OS. I am trying to update it to the 10.6.7 Update Combo and when the installation seems to be complete it says an error occurred and installation was not successful.
    I've read other discussions and one said that my Disk might need to be repaired. I have done this already and still no luck with the 10.6.7 update.
    Is there anyone who can help me PLEASE?!
    Thank you!!!

    I began trying to Update on the 15th... then tried again on the 18th. I also tried installing 10.6.5 and 10.6.6, thinking that it was only a problem with 10.6.7, but to no avail.
    I appreciate you taking your time to help me like this! Thank you!!!
    6/15/11 12:12:01 PM    Software Update[417]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.server.SystemImageUtility"></bundle>
    6/18/11 10:52:04 AM    com.apple.launchd[1]    (com.apple.suhelperd[419]) Exited with exit code: 2
    6/18/11 10:52:04 AM    Aware[117]    Application Terminated: Software Update
    6/18/11 10:52:33 AM    Software Update[7691]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
    6/18/11 10:52:34 AM    Software Update[7691]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
    6/18/11 10:52:34 AM    Software Update[7691]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.server.SystemImageUtility"></bundle>
    6/18/11 11:43:07 AM    Aware[117]    Application Terminated: Software Update
    6/18/11 11:45:30 AM    Software Update[11109]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
    6/18/11 11:45:30 AM    Software Update[11109]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
    6/18/11 11:45:30 AM    Software Update[11109]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.server.SystemImageUtility"></bundle>
    6/18/11 12:30:11 PM    [0x0-0x42042].com.apple.SoftwareUpdate[11109]    Sat Jun 18 12:30:11 Jennifer-Ariass-MacBook-Pro.local Software Update[11109] <Error>: kCGErrorIllegalArgument: CGSUnionRegionWithRect : Invalid region
    6/18/11 12:30:11 PM    [0x0-0x42042].com.apple.SoftwareUpdate[11109]    Sat Jun 18 12:30:11 Jennifer-Ariass-MacBook-Pro.local Software Update[11109] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    6/18/11 12:30:11 PM    [0x0-0x42042].com.apple.SoftwareUpdate[11109]    Sat Jun 18 12:30:11 Jennifer-Ariass-MacBook-Pro.local Software Update[11109] <Error>: kCGErrorIllegalArgument: CGSGetRegionBounds : Invalid region
    6/18/11 1:35:31 PM    [0x0-0x42042].com.apple.SoftwareUpdate[11109]    Sat Jun 18 13:35:31 Jennifer-Ariass-MacBook-Pro.local Software Update[11109] <Error>: kCGErrorIllegalArgument: CGSUnionRegionWithRect : Invalid region
    6/18/11 1:35:31 PM    [0x0-0x42042].com.apple.SoftwareUpdate[11109]    Sat Jun 18 13:35:31 Jennifer-Ariass-MacBook-Pro.local Software Update[11109] <Error>: kCGErrorIllegalArgument: CGSGetRegionBounds : Invalid region
    6/18/11 2:41:34 PM    Installer[3223]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.server.SystemImageUtility"></bundle>
    6/18/11 2:41:34 PM    Installer[3223]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
    6/18/11 2:41:34 PM    Installer[3223]    The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
    6/18/11 2:50:13 PM    Installer[3821]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
    6/18/11 2:50:13 PM    Installer[3821]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.server.SystemImageUtility"></bundle>
    6/18/11 2:50:13 PM    Installer[3821]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
    6/18/11 2:50:54 PM    Installer[3821]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
    6/18/11 2:50:54 PM    Installer[3821]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.server.SystemImageUtility"></bundle>
    6/18/11 2:50:54 PM    Installer[3821]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
    6/18/11 2:50:54 PM    Installer[3821]    The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
    6/18/11 3:00:01 PM    Software Update[4384]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.NetworkUtility"></bundle>
    6/18/11 3:00:01 PM    Software Update[4384]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.remoteinstallmacosx"></bundle>
    6/18/11 3:00:01 PM    Software Update[4384]    PackageKit: Missing bundle path, skipping: <bundle id="com.apple.server.SystemImageUtility"></bundle>
    6/18/11 6:45:55 PM    Installer[17034]    <ZeroSliderSplitView: 0x10034d200>: the delegate <TargetSelectPage: 0x100352900> was sent -splitView:resizeSubviewsWithOldSize: and left the subview frames in an inconsistent state:
    6/18/11 6:45:55 PM    Installer[17034]    Split view bounds: {{0, 0}, {402, 104}}
    6/18/11 6:45:55 PM    Installer[17034]        Subview frame: {{0, 0}, {0, 32}}
    6/18/11 6:45:55 PM    Installer[17034]        Subview frame: {{0, 0}, {402, 104}}
    6/18/11 6:45:55 PM    Installer[17034]    The outer edges of the subview frames are supposed to line up with the split view's bounds' edges. NSSplitView is working around the problem, perhaps at the cost of more redrawing. (This message is only logged once per NSSplitView.)

  • Opening GB3 files in GB4

    I have been using GarageBand 3 on my old computer (PowerBook G4 with OS 10.4).
    My files contain mostly recorded instruments (no samples) with some MIDI tracks.
    I just got a new computer (iMac) with MacOS 10.5 and GarageBand 4.
    I am unable to open my GB3 files in GB4 without getting errors.
    If i try to open the files with my new computer, GB4 gives an error saying that the GB3 files are in an unknown format. It then proceeds to open the files and gives further errors saying that a certain number (different depending on the file) of "invalid region(s) changed". Once i clear these errors, either GB4 crashes, or it opens up the main window and then gives me errors stating that certain audio regions are in 8-bit format and can not be played back.
    I have not seen any other problems on line with GB4 not being able to read GB3 files. Was there some setting in my GB3 that was not correct. I can not find anything in GB3 that specifies the quality of certain audio tracks. However, since all tracks were recorded in the same manner, and i never changed any of the settings, they should all be the same, but GB4 is only complaining about certain ones.
    Any suggestions.
    I am currently unable to load any of my GB3 files into GB4 and use them.
    This is very distressing since i will be losing over a year's worth of work if i have to rerecord all of my files to get them onto my new computer.
    TP

    Hmm, that is odd, and I don't recall hearing about problems like that from other users.
    Photoshop always treats 32 bit/channel data as gamma 1.0, and always corrects for the display.
    If you send me one of the files in question, I can take a look.
    Photoshop CS45 Standard is only limited in 32 bit/channel in that it can't create layers or use many of the brush tools.
    But Photoshop CS5 no longer has that limitation.

  • During switchover operation in IE shows error "503 Service Unavailable".

    Hi,
    I have installed Oracle Enterprise Manager 10g Release 2 (10.2.0.2) on Windows 2003 server service pack 2.Everything works fine, but when I go for switchover/failover operation firstly error comes as “500 Internal Server Error” and then after refreshing the page “503 Service Unavailable”. Following are the logs.
    I applied the patch Grid Control Release 3 (10.2.0.3.0), but still same error occurs.
    Both database status is up and EM console home shows 100% up.
    Some Collected errors from emoms.trc
    2007-11-03 12:24:35,453 [Thread-25] ERROR em.dataguard updateDGStatus.453 - ConfigBean:updateDGStatus(): Exception java.lang.NullPointerException
    2007-11-03 12:25:01,703 [Thread-26] ERROR em.dataguard updateDGStatus.453 - ConfigBean:updateDGStatus(): Exception java.lang.NullPointerException
    2007-11-03 12:25:11,156 [Thread-27] ERROR em.dataguard updateDGStatus.453 - ConfigBean:updateDGStatus(): Exception java.lang.NullPointerException
    2007-11-03 12:25:17,906 [EMUI_12_25_17_/console/targets] ERROR jdk.NLSUtil getFormattedDateWithTZ.407 - Invalid region name format: GMT+05:30
    2007-11-03 12:25:17,906 [EMUI_12_25_17_/console/targets] ERROR jdk.NLSUtil getFormattedDateWithTZ.407 - Invalid region name format: GMT+05:30
    2007-11-03 12:25:19,343 [EMUI_12_25_19_/console/home] ERROR jdk.NLSUtil getFormattedDateWithTZ.407 - Invalid region name format: GMT+05:30
    2007-11-03 12:30:16,562 [Thread-34] ERROR db.rac getEMDFromRep.806 - Closed Connection
    java.sql.SQLException: Closed Connection
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:239)
         at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:928)
         at oracle.jdbc.driver.PhysicalConnection.prepareStatement(PhysicalConnection.java:824)
         at oracle.jdbc.OracleConnectionWrapper.prepareStatement(OracleConnectionWrapper.java:72)
         at oracle.sysman.util.jdbc.ConnectionWrapper.prepareStatement(ConnectionWrapper.java:467)
         at oracle.sysman.db.rac.util.ClusterUtil.getEMDFromRep(ClusterUtil.java:795)
         at oracle.sysman.db.rac.util.ClusterUtil.getEMD(ClusterUtil.java:888)
         at oracle.sysman.emo.util.DBVerify.getDBProperties(DBVerify.java:2454)
         at oracle.sysman.emo.util.DBStateUtil.doDatabaseShutdown(DBStateUtil.java:703)
         at oracle.sysman.db.dg.util.RemoteCtrl.shutdownDB(RemoteCtrl.java:596)
         at oracle.sysman.db.dg.util.ClientOperation.doClientOp(ClientOperation.java:368)
         at oracle.sysman.db.dg.util.ClientOperation$BounceThread.run(ClientOperation.java:215)
         at java.lang.Thread.run(Thread.java:534)
    2007-11-03 12:30:16,562 [Thread-34] ERROR emo.util verifyDBProperties.2073 - DBStateUtil.verifyDBProperties: EMD URL was null or empty.
    2007-11-03 12:30:23,265 [EMUI_12_30_23_/console/database/dataguard] ERROR em.dataguard onEvent.1233 - Data Guard: found errors during role change: Unable to retrieve the URL from repository. Check the specified target name and its corresponding target type. Other possible causes: remote EMD is not pointing to the web server, or remote target information has not been loaded.
    2007-11-03 12:30:41,328 [ApplicationServerThread-5] ERROR app.SessionObjectManager sessionDestroyed.128 - java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1
    ORA-01219: database not open: queries allowed on fixed tables/views only
    2007-11-03 12:30:42,968 [PingHeartBeatRecorder] WARN emdrep.pingHBRecorder resetConnection.305 - SQLException caught while resetting connection ORA-00604: error occurred at recursive SQL level 1
    ORA-01219: database not open: queries allowed on fixed tables/views only
    2007-11-03 12:30:43,093 [Job Dispatcher Thread] ERROR em.jobs mainTask.2346 - encountered error:
    java.sql.SQLException: ORA-01092: ORACLE instance terminated. Disconnection forced
    2007-11-03 12:30:44,046 [SeverityLoad https://ashok:3872/emd/main/] ERROR eml.XMLLoader markFileAsError.854 - Error repeated 2 times: ERROR-400|ORA-00604: error occurred at recursive SQL level 1
    ORA-01219: database not open: queries allowed on fixed tables/views only
    2007-11-03 12:30:46,796 [AJPRequestHandler-ApplicationServerThread-6] ERROR eml.OMSHandshake processFailure.806 - OMSHandshake failed.(AGENT URL = https://ashok:3872/emd/main/)(ERROR = INTERNAL_ERROR)(CAUSE =java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1
    ORA-01219: database not open: queries allowed on fixed tables/views only
    2007-11-03 12:33:29,843 [AJPRequestHandler-ApplicationServerThread-6] ERROR conn.ConnectionService verifyRepositoryEx.817 - Invalid Connection Pool. ERROR = ORA-00604: error occurred at recursive SQL level 1
    ORA-01219: database not open: queries allowed on fixed tables/views only
    Regards,
    S Reddy

    Hi,
    Thanks for your reply.
    Steps Performed while configuring data guard.
    - Install Oracle Enterprise Manager 10 g with new database option on windows server 2003 enterprise edition service pack 2.
    - Applied patch of Oracle database 10g Release 2 (10.2.0.3)
    - Applied patch of Oracle Enterprise Manager 10g Grid Control Release 3 (10.2.0.3.0)
    Primary Database=GOOGLE
    Secondary Database=YAHOO
    Run the following commands in CMD.
    Microsoft Windows [Version 5.2.3790]
    (C) Copyright 1985-2003 Microsoft Corp.
    C:\Documents and Settings\oracle>set oracle_home=C:\Oracle_NET\db10g
    C:\Documents and Settings\oracle>set oracle_sid=GOOGLE
    C:\Documents and Settings\oracle>sqlplus /nolog
    SQL*Plus: Release 10.1.0.4.2 - Production on Thu Nov 8 09:44:58 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> CONNECT SYS/infodb1 as sysdba
    Connected to an idle instance.
    SQL> startup;
    ORACLE instance started.
    Total System Global Area 536870912 bytes
    Fixed Size 790068 bytes
    Variable Size 162525644 bytes
    Database Buffers 373293056 bytes
    Redo Buffers 262144 bytes
    Database mounted.
    Database opened.
    SQL> show parameters unique;
    NAME TYPE VALUE
    db_unique_name string GOOGLE
    SQL> select log_mode from v$database;
    LOG_MODE
    NOARCHIVELOG
    SQL> create pfile from spfile;
    File created.
    SQL> shutdown immediate;
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> exit
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Pr
    oduction
    With the Partitioning, OLAP and Data Mining options
    C:\Documents and Settings\oracle>sqlplus /nolog
    SQL*Plus: Release 10.1.0.4.2 - Production on Thu Nov 8 10:38:31 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> CONNECT SYS/infodb1 as sysdba
    Connected to an idle instance.
    SQL> [b]STARTUP NOMOUNT PFILE=C:\Oracle_NET\db10g\database\INITgoogle.ORA;
    ORACLE instance started.
    Total System Global Area 536870912 bytes
    Fixed Size 790068 bytes
    Variable Size 162525644 bytes
    Database Buffers 373293056 bytes
    Redo Buffers 262144 bytes
    SQL> create spfile from pfile;
    File created.
    SQL> shutdown immediate;
    ORA-01507: database not mounted
    ORACLE instance shut down.
    SQL> exit
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Pr
    oduction
    With the Partitioning, OLAP and Data Mining options
    C:\Documents and Settings\oracle>sqlplus /nolog
    SQL*Plus: Release 10.1.0.4.2 - Production on Thu Nov 8 10:41:32 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> CONNECT SYS/infodb1 as sysdba
    Connected to an idle instance.
    SQL> STARTUP MOUNT;
    ORACLE instance started.
    Total System Global Area 536870912 bytes
    Fixed Size 790068 bytes
    Variable Size 162525644 bytes
    Database Buffers 373293056 bytes
    Redo Buffers 262144 bytes
    Database mounted.
    SQL> alter database archivelog;
    Database altered.
    SQL> alter database force logging;
    Database altered.
    SQL> select log_mode from v$database;
    LOG_MODE
    ARCHIVELOG
    SQL> exit
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Pr
    oduction
    With the Partitioning, OLAP and Data Mining options
    Then I login to site https://ashok:1159/em by using SYSMAN account which is the console for em.
    -     Then I created standby database through.<TARGETS-DATABASES-GOOGLE- MAINTENANCE -DATA GUARD- SET UP AND MANAGE-ADD STANDBY DATABASE- CREATE A NEW PHYSICAL STANDBY DATABASE>
    -     Then I verify the configuration it shows the following log.
    Initializing
    Connected to instance ASHOK:yahoo
    Starting alert log monitor...
    Updating Data Guard link on database homepage...
    Data Protection Settings:
    Protection mode : Maximum Performance
    Log Transport Mode settings:
    GOOGLE: ARCH
    YAHOO: ARCH
    Checking standby redo log files.....OK
    Checking Data Guard status
    GOOGLE : Normal
    YAHOO : Normal
    Request ID: 2: 1: 638446177, Operation: CTL_GET_STATUS
    Checking Inconsistent Properties
    Checking agent status
    GOOGLE ... WARNING: No credentials available for target ASHOK
    Attempting agent ping ... OK
    YAHOO ... WARNING: No credentials available for target ASHOK
    Attempting agent ping ... OK
    Switching log file 90.Done
    Checking applied log on GOOGLE...OK
    Processing completed.
    Following are the files:
    Additional parameters in[b] INITgoogle.ora
    *.db_unique_name='GOOGLE
    *.LOG_ARCHIVE_CONFIG='DG_CONFIG=(GOOGLE,YAHOO)'
    *.log_archive_dest_1='location=C:\Oracle_NET\ALD_DEST_1','VALID_FOR=(ALL_LOGFILES,ALL_ROLES)','mandatory','arch','DB_UNIQUE_NAME=GOOGLE','REOPEN=30'
    *.log_archive_dest_2='SERVICE=YAHOO','LGWR','ASYNC','VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)','DB_UNIQUE_NAME=YAHOO'
    *.LOG_ARCHIVE_DEST_STATE_1=ENABLE
    *.LOG_ARCHIVE_DEST_STATE_2=ENABLE
    *.REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE
    *.LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
    *.LOG_ARCHIVE_MAX_PROCESSES=10
    *.fal_server=YAHOO
    *.fal_client=GOOGLE
    *.standby_file_management=auto
    *.db_file_name_convert='YAHOO/YAHOO','GOOGLE/GOOGLE'
    *.log_file_name_convert='C:\Oracle_NET\OD\YAHOO\YAHOO','C:\Oracle_NET\OD\GOOGLE\GOOGLE'
    listener.ora
    # listener50312.ora Network Configuration File: C:\DOCUME~1\oracle\LOCALS~1\Temp\listener50312.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = GOOGLE)
    (ORACLE_HOME = C:\Oracle_NET\db10g)
    (PROGRAM = extproc)
    (SID_DESC =
    (GLOBAL_DBNAME = GOOGLE_DGMGRL)
    (ORACLE_HOME = C:\Oracle_NET\db10g)
    (SID_NAME = GOOGLE)
    (SID_DESC =
    (GLOBAL_DBNAME = YAHOO_DGMGRL)
    (ORACLE_HOME = C:\Oracle_NET\db10g)
    (SID_NAME = YAHOO)
    (SID_DESC =
    (GLOBAL_DBNAME = YAHOO_DGMGRL)
    (ORACLE_HOME = C:\Oracle_NET\db10g)
    (SID_NAME = YAHOO)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ashok)(PORT = 1521))
    Tnsnames.ora
    # tnsnames.ora Network Configuration File: C:\Oracle_NET\db10g\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    GOOGLE =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ashok)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = GOOGLE)
    YAHOO =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ashok)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = YAHOO)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    -     Then Both databases are running
    -     It showing the data guard home page.
    -     Then I go for switchover operation the error occurs.

Maybe you are looking for

  • Imac G4 black screen - darwin/BSD??? bash - 2.05a$

    Wow what does this mean!!?? We were installing the operating software when we were asked for a password, we had to reset password which we did, started up the computer again, got to log in screen, entered password and then............ black screen co

  • User Exit or BADI For MRP Planning

    Dear all ,            I want to Control the MRP Planning ( MD01 ) only for Demand Orders.. Tell me any User exits / Badi for that Issue.. i checked in this enchancement M61X0001, this is correct or wrong ,,,, With Regards ,    GJ

  • Negate colors of a window in openbox

    I have been running ubuntu for the past few months with compiz enabled, and I have really enjoyed the ability to negate the colors of any window with Super-n. It's great for readability at night. Anyway, now that I am back on my arch machine, I am wo

  • Error:Release outside field of responsibility

    Dear All, Error:Release outside field of responsibility in Function module:BAPI_PO_RELEASE I given the Inputs: Purchase Order:xXXXXXXXX PO_REL_CODE: 01 Exceptions: X it showa the Error:Error:Release outside field of responsibility can any one help me

  • Camera RAW and Elements 8

    I have Elements 8 running under Windows 7. Elements 8 does not support my camera (Nikon D3100) so I have downloaded the DNG converter to turn my NEF files into DNG files. When I open the DNG files in Elements I do not get the Camera RAW interface pan