Invalid tincan object name
I am trying to stream video from a Flash Media Server using
AS3. I am getting an error that I cannot figure out. In my
NetStatusEventHandler I am getting event code
"NetStream.Play.Failed". The error is: "Invalid tincan object name
(stream ID: 1)" This means absolutely nothing to me and I have been
unable to find any documentation on the meaning of this error.
ISSUE RESOLVED: I was including the filename in the
netconnection.connect method's URI
NOTE: I have also posted this in the Flash Media Server forum
as I was unsure where this question best fit.
Glad that you figured it out. Here are a couple of things
that could help in the future. It would have helped if you had
posted the code you were using. Somebody would probably have seen
something like that right off.
The other thing is that it is helpful if you don't edit
posts, but rather make a new one. Folks who use Newsreaders on the
forum don't see the edits.
Similar Messages
-
Invalid DataStore object name /BIC/B0000173: Reason: No valid entry in tabl
Hi gurus,
I recently transported the 0FI_GL_10 datasource to preproduction. when i am trying to load the data in PrePod we are getting this error message.
<b>Invalid DataStore object name /BIC/B0000173: Reason: No valid entry in table RSTS</b>
Any help is appreciated with points.any more detailed messages,sm21 or st22??
did you try doing RSRV on the datastore object??
are you using the nw2004s data flow??
if using 3.x data flow ,skip PSA and try reloading it.
Hope it Helps
Chetan
@CP.. -
Invalid DataStore object name /BIC/B0005712
Hi Frnds,
I was trying to execute a PSA deletion step on one Datasource. In that process I got the below error.
Error msg: Invalid DataStore object name /BIC/B0005712: Reason: No valid entry in table RSTS.
Do, I need to maintain anything related to this Datasource in the table RSTS. if so....what it could be ?
Or Do we have any other solution ?
Thank you.
NGR.Hi,
In my case,
Inspite of going through several valid NOTES & program, my issue didnt resolve.
I have resolved the issue by adjusting the PSA table for the same.
Procedure:
Take the psa name --> go to table rstsods --> find the ODSNAME_TECH name for the relevant psa --> se38 t.code --> enter ODSNAME_TECH and click on 'adjust & activate database table' (make sure you have selected 'save data' radio button.
Just in case anyone who come across this problem, can do the above steps.
Regards,
Dubbu. -
Invalid DataStore object name error when running process chain after EHP1
Hello,
We recently upgraded our BW Dev platform to NW7.01 EHP1 SP6. I noticed that the layout for "Delete PSA Request" process in the Process Chain has changed after the upgrade. We can no longer specify the actual PSA table to delete eg, /BIC/B0001645. Instead we need to specify the Datasource name and the Source System.
Now after the upgrade when I run one of my process chains, it fails at "Delete PSA Request" step with error message "Invalid DataStore object name /BIC/B0001645: Reason: No valid entry in table RSTS". This datasource is based on the flat file source system and the PSA table for this Datasource is /BIC/B0001653.
Unfortunately the process chain is picking up an older PSA table for this datasource and there is no way for me to specify the current PSA table name after this change in layout with EHP1 upgrade. Any suggestions on how to resolve this issue.
Many Thanks,
AlHi,
Please implement OSS 1345331.
If this does not help try the below steps:
1. Run the report 'RSAR_PSA_CLEANUP_DIRECTORY/_MS' in check mode for a
particular PSA table for finding the inconsistencies.
2. After that please analyze the logs and if there is any problems related to partition, you need to correct them using the report u2013
3. 'SAP_PSA_PARTNO_CORRECT' in repair mode for the
PSA tables. Run the report again after this
4. 'RSR_PSA_CLEANUP_DIRECTORY/_MS' in check mode to
double check that the invalid partitions are
corrected.
Once this is done you can execute the report
'RSR_PSA_CLEANUP_DIRECTORY/_MS' in repair mode.
-Vikram -
I am new to SSRS and I am trying to migrate reports from 2008 to 2012. As I have so many reports to migrate, I simply got the back up of ReportServer,
ReportServerTempDB, and Encryption Key and restored them to test environment. I made necessary configuration from RS configuration tool. I am able to see the reports now when I browse //hostname/reports. But when I open any particular report I am getting some
error.
· An error has occurred during report processing.
(rsProcessingAborted)
Query execution failed for dataset 'dataSet'.
(rsErrorExecutingCommand
Semantic query execution failed. Invalid object name
'RPT. ******'. (rsSemanticQueryEngineError)
****** - I am assuming this is a custom data class.
Does anyone have insight on this? or any better way that I can migrate the reports to new server with less efforts.
I don’t have the reports solution file to deploy the reports, so I have followed backup and restore process.Hi Kishore237,
According to your description, you migrated some reports from Reporting Services (SSRS) 2008 to 2012. Now you get error when accessing the reports on SSRS 2012. Right?
In this scenario, did you modify the report data source in database after migration? You can try to open the report in Report Builder or Report designer and check the report dataset. If you can preview the report in Report builder or Report designer,
please try to redeploy the report to Report Server. If it is still not working, please try to restore the database from backup. And for migrating reports, please follow the "Content-Only Migration" in the link below:
http://msdn.microsoft.com/en-us/library/ms143724(v=sql.110).aspx
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
Report error, Invalid object name 'v_lu_cpu'
Hi
I have a report that I have imported from another SCCM server that has it working. I have changed the datasources after the import but when I try to run the report I get this error message:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DataSet0'. (rsErrorExecutingCommand)
Invalid object name 'v_lu_cpu'.
Does anybody know what this means?Ok, then I understand.
I'm not that good at reporting so if anybody can help out with replacing the code that uses v_lu_cpu with
something else, it would be very kind. Thank you
SELECT DISTINCT
v_r_system.netbios_name0 AS "Computer Name",
v_r_system.Description0 AS "Description",
v_gs_system_console_usage.topconsoleuser0 AS "Top Console User",
v_GS_PC_BIOS.serialnumber0 AS "PC Bios Serial Number",
v_gs_computer_system.manufacturer0 AS "Computer Manufacturer",
v_gs_computer_system.model0 AS "Computer Model",
CASE
WHEN v_gs_computer_system.manufacturer0 LIKE 'Dell%'
THEN 'http://support.dell.com/support/topics/global.aspx/support/my_systems_info/details?servicetag=' + v_gs_system_enclosure.serialnumber0
WHEN v_gs_computer_system.manufacturer0 LIKE 'Hewlett%'
THEN 'http://h20000.www2.hp.com/bizsupport/TechSupport/WarrantyResults.jsp?sn=' + v_gs_system_enclosure.serialnumber0 + '&country=US'
WHEN v_gs_computer_system.manufacturer0 LIKE 'HP%'
THEN 'http://h20000.www2.hp.com/bizsupport/TechSupport/WarrantyResults.jsp?sn=' + v_gs_system_enclosure.serialnumber0 + '&country=US'
ELSE '(Not available)'
END AS "Warranty Information"
FROM v_gs_processor
INNER JOIN v_r_system
ON v_gs_processor.resourceid = v_r_system.resourceid
INNER JOIN v_gs_system_enclosure
ON v_gs_system_enclosure.resourceid = v_r_system.resourceid
INNER JOIN v_GS_PC_BIOS
ON v_GS_PC_BIOS.resourceid = v_r_system.resourceid
INNER JOIN v_gs_computer_system
ON (v_gs_computer_system.resourceid = v_r_system.resourceid)
LEFT JOIN v_gs_system_console_usage
ON v_gs_system_console_usage.resourceid = v_r_system.resourceid
LEFT JOIN v_lu_cpu
ON Lower(v_lu_cpu.cpuhash) = Lower(v_gs_processor.cpuhash0)
WHERE v_GS_SYSTEM_ENCLOSURE.ChassisTypes0 <> 12
AND
v_gs_computer_system.manufacturer0 NOT LIKE 'VMware%'
AND
v_gs_computer_system.model0 NOT LIKE 'Virtual Machine'
AND
v_R_System.Operating_System_Name_and0 LIKE 'Microsoft Windows NT Workstation%' -
Invalid object name 'dbo.v_R_System'
Hi,
About six months ago I implemented SCCM in our domain and it's been working great. This morning, when I attempted to run one of the Asset Intelligence reports in the console, I received the following error...
An error has occurred during report processing. (rsProcessingAborted)
...uh oh! So I logged onto our SQL database server, opened up the Report Manager in IE and attempted to run the same report. This time I got a bit more...
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DataSet0'. (rsErrorExecutingCommand)
Invalid object name 'dbo.v_R_System'. Could not use view or function 'fn_rbac_R_System_Valid' because of binding errors.
...I'm no SQL admin, so time to ask Mr Internet. The only related post I could find was the first one you get when you search "dbo.v_R_System missing" on any search engine (the ones I tried anyway).
...which wasn't particularly helpful.
One thing I did try, which I thought was worth a shot, was to create a new database in Reporting Services Configuration Manager. After a few minutes that populated nicely with all the reports,
but I'm still getting the same problem.
We've got a really simple environment. Two Windows Server 2008 R2 servers for SCCM,
one running the site database and reporting server and the other doing everything else. Database is running on Microsoft SQL Server 2012.
Any ideas?
Cheers,
DaveI was also missing that same view. I can't believe it. In production and in my test environment we are on ConfigMgr 2012 SP1 CU3. I started the upgrade on my test environment and it failed saying that it couldn't find that view.
I went to our production environment and the view existed. I scripted the creation of the view and then created the view in our test environment. The upgrade successfully completed after that. Thanks for leading me in the right direction! -
Why its showing error : Invalid Object Name 'table name' when we try to insert data ?
Hi,
When i try to insert data in the database with the following query
con.Open();
cmd = new SqlCommand("insert into good(ID,Name) values('" + textBox1.Text + "','" + textBox2.Text + "')", con);
cmd.ExecuteNonQuery();
MessageBox.Show("Insert success");
con.Close();
its showing following error Invalid Object Name 'good'Use 3-part naming like: MyDatabase.dbo.good(ID,Name) .
Also consider using stored procedure for database INSERTs.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014 -
Error Invalid object name 'mbrGROUPS'.
I'm attempting to validate the standard elimination logic for Intercompany eliminations. I'm getting the following error when I try to validate:
Invalid object name 'mbrGROUPS'. in:select [ID] from mbrGROUPS where [REPORTING] = 'Y'
Below is my logic for this. I'm trying to use this logic for a Legal consolidations application.
//=============================================
// Default Intercompany Eliminations
//=============================================
*INCLUDE SYSTEM_CONSTANTS.LGL
*SYSLIB ICELIMWITHCURR.LGL
//=============================================
// Elimination logic for three organization(H1, H2, H3)
//=============================================
INITIALIZE_ELIM()
ELIMINATE_ORG(H1)
ELIMINATE_ORG(H2)
ELIMINATE_ORG(H3)
*COMMITI fixed this myself. I forgot to change the "CURRENCYDIM" in the ICElimWithCurr file to my Reporting Currency, which in this case is "ConsolView"
Logic can be so humbling sometimes. -
Invalid object name 'dbo.uf_GetRateSrcMember'
Hello Friends,
We recently applied the SP3 (CPMBPC03P_1-20002499) for BPC 5.1. We are in Single Server environment. Our BPC 5.1 build was 5.0.486 which was required to install the SP3. After the installation it is 5.0.502
We are getting the error below when we are trying to change the appliction sets from from the main page.
Any help to resolve the issue is appreciated
Server Error in '/OSoft' Application. Invalid object name 'dbo.uf_GetRateSrcMember'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: Invalid object name 'dbo.uf_GetRateSrcMember'.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
Add the following section to the configuration file of your application:
<configuration>
<system.web>
<compilation debug="true"/>
</system.web>
</configuration>
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
Stack Trace:
[Exception: Invalid object name 'dbo.uf_GetRateSrcMember'.]
Microsoft.VisualBasic.CompilerServices.LateBinding.LateGet(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack) +905
OSoft.Consumers.ZFP.WebBase.PageBase.GetCurrentView() +518
OSoft.Consumers.ZFP.WebBase.PageBase.get_CurrentView(String strDimension) +43
ASP.Landing_aspx.__Render__control1(HtmlTextWriter __output, Control parameterContainer) +95
System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +27
System.Web.UI.Control.Render(HtmlTextWriter writer) +7
System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +243
System.Web.UI.Page.ProcessRequestMain() +1926
Really looking forward for answers.
I would really really really appreciate any help
ThanksKaji,
I had the same problem. Here is the solution:
Dear customer,
This issue looks similar to a previously reported bug.
In general there is the possibility that some service/process
remained in a bad status and this can be fixed by restarting the server
But could you please also check, whether this description fits
to your scenario:
This issue occurred because when there are no secured dimensions
in an appset,
The modified application process remove the user function
which is used for checking secured dimension.
In case there is no secured dimension in the appset the
problem occurres.
This issue looks similar to a previously reported bug.
In general there is the possibility that some service/process
remained in a bad status and this can be fixed by restarting the server
But could you please also check, whether this description fits
to your scenario:
This issue occurred because when there are no secured dimensions
in an appset,
The modified application process remove the user function
which is used for checking secured dimension.
In case there is no secured dimension in the appset the
problem occurres.
When modify application is run , the user function has been removed.
A workaround is this:
if you make Entity and RateSrc as secured dimension,
the user function will be made in the appset again.
Then you can change the user function as other name in database
by renaming. After finished the rename,
you can change the dimension as unsecured dimension like current.
Then, you have to replace the user function name
as original function name.
Because the user function name is dependent on dimension name.
If you can#t connect BPC Admin due to web page error,
you have to execute the EverestAdmin.exe file
in "C:\Program Files\BPC"
Hope it solves the prob...
Nic -
Invalid Object Name When Executing from Report Manager
I ran some code to create a modified view of ExecutionLog3 on a SQL Server 2012 instance. The ReportServer and ReportServerTempDB were transferred from a 2005 instance and are still on that compatibility level. After creating the new view, I
created a report in SSDT and it runs fine. I deployed the dataset followed by the report. I went to Report Manager to test it and the report fails with the following:
An error has occurred during report processing. (rsProcessingAborted)
The execution failed for the shared data set
'ExecutionLog'. (rsDataSetExecutionError)
Query execution failed for dataset ''. (rsErrorExecutingCommand)
Invalid object name 'ExecutionLog3_Modified'.
The code for the view is below and it came from MSSQLTips. Why does the report run fine from SSDT and fail in Report Manager?
USE [ReportServer]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE VIEW [dbo].[ExecutionLog3_Modified]
AS
SELECT
EL.InstanceName,
COALESCE(C.Path, 'Unknown') AS ItemPath,
EL.UserName,
EL.ExecutionId,
CASE(EL.RequestType)
WHEN 0 THEN 'Interactive'
WHEN 1 THEN 'Subscription'
WHEN 2 THEN 'Refresh Cache'
ELSE 'Unknown'
END AS RequestType,
-- SubscriptionId,
EL.Format,
Parameters,
CASE(EL.ReportAction)
WHEN 1 THEN 'Render'
WHEN 2 THEN 'BookmarkNavigation'
WHEN 3 THEN 'DocumentMapNavigation'
WHEN 4 THEN 'DrillThrough'
WHEN 5 THEN 'FindString'
WHEN 6 THEN 'GetDocumentMap'
WHEN 7 THEN 'Toggle'
WHEN 8 THEN 'Sort'
WHEN 9 THEN 'Execute'
ELSE 'Unknown'
END AS ItemAction,
EL.TimeStart,
YEAR(EL.TimeStart) AS Start_Year,
MONTH(EL.TimeStart) AS Start_Month,
DATENAME(MONTH,EL.TimeStart) AS Start_Month_Name,
DATENAME(DW,EL.TimeStart) AS Start_Day_Of_Week,
DATEPART(WEEKDAY,EL.TimeStart) AS Start_Day_Number_of_Week,
EL.TimeEnd,
EL.TimeDataRetrieval,
EL.TimeProcessing,
EL.TimeRendering,
CASE(EL.Source)
WHEN 1 THEN 'Live'
WHEN 2 THEN 'Cache'
WHEN 3 THEN 'Snapshot'
WHEN 4 THEN 'History'
WHEN 5 THEN 'AdHoc'
WHEN 6 THEN 'Session'
WHEN 7 THEN 'Rdce'
ELSE 'Unknown'
END AS Source,
EL.Status,
EL.ByteCount,
EL.[RowCount],
EL.AdditionalInfo,
C.Name,
C.CreatedByID,
C.ModifiedByID,
C.Description,
C.CreationDate,
C.ModifiedDate,
CASE
WHEN C.TYPE=1 THEN 'Folder'
WHEN C.TYPE=2 THEN 'Report'
WHEN C.TYPE=3 THEN 'XML'
WHEN C.TYPE=4 THEN 'Linked Report'
WHEN C.TYPE=5 THEN 'Data Source'
WHEN C.TYPE=6 THEN 'Model'
WHEN C.TYPE=8 THEN 'Shared Dataset'
WHEN C.TYPE=9 THEN 'Report Part'
END AS Type_Description
FROM
ExecutionLogStorage AS EL
LEFT OUTER JOIN Catalog AS C ON (EL.ReportID = C.ItemID)
GO
Lee MarkumHi Lee,
According to your description, you can't process the dataset when viewing the report on report server. Right?
In this scenario, as you can see the dataset name in error message is empty, and it says "Invalid Object Name". Because you have already created a view in your database. When you run this report again, this query be executed again so that you can
not create another view with same name. So you just need to query the view directly when creating dataset.
Select * from ExecutionLog3_Modify
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
ERROR - JBO-25005: Object name for type View Object is invalid
Hi All,
I am getting this error "JBO-25005: Object name for type View Object is invalid" while executing my VO query in Controller code. Can any one please tell me the reason behind this error?
I am creating a VO dynamically and .xml file of a VO is placed in a proper directly. Please let me know some inputs to resolve this.
Thanks & Regards,
-AbmI found the below explanation for the error mentioned. Check if your package name, Object names confirm to the standard specified
JBO-25005: InvalidObjNameException
Cause: An attempt has been made to associate a business component name with an object for which it is not valid.
Action: The name should be a valid Java identifier with no spaces or punctuation. Names are of the format myProjectPackage.BusinessPackage.BusinessComponent -
Hello,
When trying to perform an Upgrade of a BW3.0B to BW3.5, Prepare Phase, an error occurs in script MSSCONCHECK.SQL.
- Msg 208, Level 16, State 1, Server SRVDW, Line 1
Invalid object name 'SVERS'.
Can anyone help?
Thank you.
Regards,
PTI have similar eror message during upgrade from ECC 5.0 to ECC 6.0 on MS SQL 2005. The output from my sapup is as shown below:
>> 07:39:34 PREPARE: START OF PHASE INITPUT_PRE
Supply the following information:
Confirm the name of your SAP system: [AWD]
SAP SYSTEM ID =
The hostname of your central SAP server: [SERVER01]
SAP SYSTEM HOST =
Enter the SAP instance number: [02]
INSTANCE NUMBER =
The system identifier of your database: [AWD]
DATABASE ID =
The hostname of your database server: [SERVER01]
DATABASE HOST =
Executing script MSSCONCHECK ...
MSSCONCHECK: Connection check failed for the user specified
SAPup message
SAPup> Errors were found in the logfile MSSCONCHECK.LOG
after execution of the script MSSCONCHECK.SQL.
SAPup> SAPup cannot proceed until these errors are fixed.
Please, examine MSSCONCHECK.LOG, fix reported errors and then call R3
gain
- "continue"
- "cancel"
Enter one of these options [continue] :=
SAPup message
SAPup> SQL-scripts must be executed by the NT user account SERVER01\awdadm.
Check your installation of the integrated security procedure
on host SERVER01 and make sure that a login for the NT user
SERVER01\awdadm exists with the following rules:
- user SERVER01\awdadm owns the role System Administrators
- user SERVER01\awdadm has the default database AWD
SAPup> Integrated security installed correctly?
- "no"
- "yes"
Enter one of these options [no] := yes
Executing script MSSCONCHECK ...
I'm currently running both Solution Manager 4.0 and mySAP ERP 2004 SR1 on the same box in Development environment.
Has anyone gotten a breakthrough on this error messages? Mode set to both SQL and Windows Authentication, can do selct * from SVERS for solution manager database but not for ECC 5.0.
Urgent!!!! -
Test-SPContentDatabase : Invalid object name 'Webs'
I am trying to upgrade from SP 2010 to 2013.
For this I am following the database detach and attach process.
I have taken the backup of my content DB from SP2010 and restored it on SP2013 SQL server.
After this, I am running the following powershell command on SP2013 powershell:
Test-SPContentDatabase -name "WSS_Content" -webapplication "http://servername"
After running this, I am getting the following error:
Test-SPContentDatabase : Invalid object name 'Webs'.
At line:1 char:1
+ Test-SPContentDatabase -name "WSS_Content" -webapplication
"ht ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo
: InvalidData: (Microsoft.Share...ContentDatabase:
SPCmdletCheckContentDatabase) [Test-SPContentDatabase], SqlException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletCheckContentDatabase
I even tried to use the Mount-SPContentDatabase command also, but still getting the same error.Looks like there is a table named "Webs" which doesn't exist in normal SharePoint 2010/2013 content databases. What you can do is create a new Content Database, in SharePoint 2010, attached to that Web Application, and use Move-SPSite on each Site Collection
in the WSS_Content database to move them to the new Content Database.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Maybe you are looking for
-
No access via webinterface possible
hey, i'm working with oracle 11g for a few weeks now. But now i have a problem and need some help. Yesterday, i deleted the database and created a new one. afterwards i configured the listener. during the listener configuration i recieved a port erro
-
Show custom EditForm from a specific document library view
Hello, I've created a custom EditForm that I would like to show when the user clicks the "<label for="ShouldDisplayEdit">Edit" (link to edit item)</label> icon; however I just want to show this EditForm for a specific view. I have a listview webpart
-
Iphone 4 will not fully restore
i have an iphone 4 with ios 7.1.2 and it went into recovery mode and when i plugged it into itunes like the screen showed me to it said there is an iphone in recovery mode that needs to be restored so i tried to restore it and it went through the fir
-
Can I install Photoshop stand alone upgrade and Creative Suite on same machine?
I'd like to be able to install my Photoshop CS6 Upgrade on the same machine as I am running Creative Suite 5.5. I'm using Windows 7 64bit. I have one running on a laptop and one on my main machine.. is this possible without conflicts?
-
Is Oracle free for science?
Hi Can anyone explain me is Oracle RDBMS free for scientific research (because research is non-commercial and non-production)? Thank you in advance