Inventory managment Snap Shot scenario.Urgent

Hi,
I am doing snapshot scenario for inventory management in BI 7.0. , when i am doing that i have small doubt , as said in stepo by step process of that document i am doing, for the non-cumulative key figures we need to use cumulative key figures as inflow and out flow.
my question is when we create transformation i could not see my non-cumulative key figures where in i am supposed to write routines at traansformations level, i could see only cumulative key figures.
Can any one give me idea why it is happned.
i am using ODS and as well as cube.
Regards
Ram

You need not to write any routine or do any assignment for non-cummulative kyf.
In the definition of non-cummm kyf u have already defined inflow and out flow which will take care. U may not also see the data for non-cumm kyf in display data of ods but in report  u will see the data.
Regards,
Mahendra

Similar Messages

  • Inventory Management in Retail Scenario

    Hello Gurus,
                     We are implementing BI7 and SAP IS retail. I have tried using 0IC_C03 cube but it is not giving correctresults. Can anyone suggest for implementing inventory management in retauk scenario.
    Regards,
    Baljit Singh

    Hello OJ,
               Thanks for your reply/ I have also tried 0RT_C36 cube. Values are still coming negative. I have used 2LIS_03_BX instead of 2LIS_40_S278.I have also choosen industry sector as retail. I have also checked BW in tcode BF11. There is no data as of now in 2LIS_40_REVAL. But still the values are negative and not matching with stock in ISR systems.I have also done compression and marker updates the way we do for 0IC_C03.
    Can you please advise. Is there any special config for ISR scenario.
    Regards
    Baljit Singh

  • Inventory Management, New Snapshot Scenario

    We are planning to implement the New Snapshot scenario for Inventory Management. This is based on the "How to...." document. As per what is shown in the document, all the 3 extractors feed into the same DSO. However, when I try to create the Update Rules for <b>BX</b>, I get a error that there is no key figure. However, the DSO (Standard) has the Key figures. These are cummulative. Maybe, because of that I get the error when I create update rules for BX. But then, in the document the key figures appear. How is this possible.
    Has anyone tried this and has been successful. If so, I'd appreciate if you could send some tips.
    Thanks

    hello
    can you please take a screenshot of your data model and update rules (inside) and send me to (see email in card)
    It will really help me!
    Alex

  • Handling Inventory managment

    Hi Friends,
    May be this topic might have delt many times in this forum ,
    I am new to handling 0IC_C03 Cube where in i went through the doucument How to handle the inventory managment(snap shot scneriao).
    I went through some OSS notes regarding the Marker settings and Compressions.
    I have some basic answers and very enthusiastic to know more abt the cube.
    I do know we have to set the marker when you load data source 2LIS_03_BX,and do not set the marker when we load/delta load with out marker(no marker).My question is.
    1) when opening balance is taken we do set the marker and compress,is that we set marker only first time we we load BX data source.
    2) how frequently we should compress the request
    3) BX data soure is loaded only for one time.
    4)How will be fact table look like when we set marker.
    Thanks & Regards
    Ram
    Edited by: Ram on May 31, 2008 8:30 PM

    hi,
    1) when opening balance is taken we do set the marker and compress,is that we set marker only first time we we load BX data source.
    Ans - yes, this compression will update the reference point (markar) for the non cumaltive key figures used in cube.(BX load is done only once)
    2) how frequently we should compress the request
    Ans - once the init is compressed, delta loads were not mandatory to compress, but if you do compression then report performance will be good.(non cumulative KFs will get values only at the report run time with the help of markar set for them.
    3) BX data soure is loaded only for one time.
    Yes
    4)How will be fact table look like when we set marker.
    Ans- All the data from F table will be moved to E table as in ordinary compression the reference point is get updated.
    Ramesh

  • Snap shot in inventory management

    Is it recommended to use the snap shot scenario in Inventory management cube 0ic_c03?
    If yes can you please tell me the procedure to finish the process or creating it?
    I have already loaded the data in to the cube from the Data sources 2LIS_03_BX AND 2LIS_03_BF.
    thanks,
    Naveen

    Please check this http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328&overridelayout=true

  • Regarding update rules activation in inventory management(2LIS_03_BF)

    Hellow gurus,
      i am working on inventory management with snap shot scenario for that we are using 3 business content datasources they are (2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM), now i want to activate the update rules for infosource(2LIS_03_BF) & cube, when i check the update rules it shows every thing is ok, but not activating ,please could you give me the suggestions
    Regards,
    Chandra.

    bf setuptable filling based on posting date
    give the posting date and give the name of job run
    give the termination date and time
    execute in background.you you can start the more jobs
    depending on your data.you have bulk data you can divide the
    jobs in based on posting date.
    after that check the status in sm37.

  • Inventory management snapshot model using Datamart Interface

    Hi,
    We have implemented Inventory management NON-CUMULATIVE scenario.
    Now for reporting needs we are adding snapshot model and trying to use datamart interface to fill up snapshot cube.
    But how to get value of KF say "ZTOTALST" becuase NON-*** cube has only changes stored as "0RECTOTSTCK" and "0ISSTOTSTK". If anyone has implemented or has any ideas on using snapshot model  with datamart interface , please help .
    regards,
    Daljit Boparai

    Try out with this
    http://help.sap.com/bp_biv335/BI_EN/index.htm
    Regards
    Kumar

  • Urgent-Inventory Management in case of a glass or ply industry

    A typical scenario.
    I am facing a problem in inventory management for a client of mine who is into glass cutting and supply. The glass sheets are purchased in sheets from the vendor and is cut into various shapes and dimensions according to the order recieved by him. now in most of the cases the entire sheet is not used in a particular order. the remaining part which is not  used goes to the inventory. Now for a next order all the remaining part may be used if it matches the lengthXBreadth specifications. So the inventory items should show the length X Width specification. The dimensions are not fixed and there may be  "n" number of variables.
    Example- A default sheets of sizes 10"X10" is purchased form vendor. Seperate shapes of 6"X4" and 4"X 4" is cut out from it. Then the remaining part will have a dimension of 6"X10", which goes to the inventory. Now whenever he will see te inventory report he should be able to see that 1qunty of 6"X10" is ther in the inventory. So that when if he recieves an order of 6"X8" or 6"X10" he can use that and save cutting a new sheet (10"X10"). This will minimise the wastages.
      I had planed to do it by the area but then that does not solve the perpose as the inventory total will show the sum area of all the dimensions in the inventory in "sq@units". Makong item masters for different dimensions will involve a huge inventory management and the users may land up in making numerous masters evry day and also risk of the duplication of the same masters will prevail.
    Please anyone who has done any implementation for such clients or of similar type or any one having a suitable solution to this issue........please help!!!

    Debraj,
    In that case the option you could try is to enable batches and store the size as a batch number
    For example: The inventory could have 10 pieces of item A
    Qty......Batch
    ..2.......6x10
    ..3.......6x8
    ..5.......6x6
    Now when ever you want to add a cut piece of item A which is of size 6x10, you simply enter Batch 6x10 and this will not only increase stock by1 but also you now the visiblity of what the stock is made up of by running the Batch report.
    If you want to do it in a much better way then you need to probably go with an AddOn
    Suda

  • Snapshot scenario or non cumulative key figure  in inventory management

    Hi
    We are currently using Inventory Management with non-cumulative key figures but we get very high performance problems due to so big number of lines in info cube.
    We are analyzing the other scenario with snapshot and I am asking if it would be very realistic to use it to satisfy our requirement: to be able to get inventory management at day level for about 2 000 000 combinations article-site and about 100  000 stock movement lines per day (we are retailer!).
    Is there somebody to give me advice about it?
    Tanks a lot
    Anne

    Being a non-cumulative KF, total stock is automatically takes care of that.
    Try putting all the restrictions which you have included for total receipts and total issues, for eg,  restrict Total Stock with the movement types used in Receipts as well as Issues.
    Check and revert.
    Regards
    Gajendra

  • Inventory Management Scenario

    Hi BW Experts,
    I was working on the Inventory Management screnario as in How to Handle Inventory Management Scenarios in BW with cumulative KFs. I read many of the forum postings but I am still little bit confused about the sequence of the loading. As per my understanding, BX goes to 0IC_C03 bus. content cube and snapshot ODS. BX load in 0IC_C03 is compressed. Then BF and UM goes to snapshot ODS, snapshot infocube and 0IC_C03 (initilized for Delta). Then the generic extractor from snapshot ODS goes to snapshot infocube as monthly load and also to ODS itself. Now the questions are:
    1-) Is the sequence above correct? If not could you pls. explain? What are reasons behind of this?
    2-) What are the functions of these objects exactly, in detailed? How do you validate data (by comparing 0IC_C03 and snapshot cube)?
    3-) Why the generic extractor goes to infocube and ODS together, what is the reason?
    4-) Is snapshot infocube loaded with BF and UM as delta daily? After initialization am I going to load the snapshot infocube every night or just the 0IC_C03?
    5-) Do I have to put 0CALDAY into Agg. Ref. char. in the maintenance screen of the defined custom KFs (Z* keyfigurs for this scenario) or just in the report enough?
    6-) Are the routines working correctly except for
      diff_month(2) type i-> "i" is going to be changed into "n"
    After I loaded in the above sequence when the bx is loaded into 0IC_C03 cube transferred data records are less than added. What is the reason?
    Contributions are highly appreciated. Thanks.
    Best Regards,
    Message was edited by: John Seker
    Message was edited by: John Seker

    Hi Loic
    Can u please see if all the steps listed below are OK.
    While setting up  the IM Scenario
    I have jotted down the steps with valuable inputs from you  and paper 'How to Hanlde IM scenarios'
    Please find the steps below. Kindly review them and let me know in case I have got anything wrong or missed out on anything.
    1. Transfer Business Content Datasources 2LIS_03_BX , 2LIS_03_BF, AND 2LIS_03_UM in RSA5.
    2. Go to Transaction LBWE, Activate Datasources 2LIS_03_BF, AND 2LIS_03_UM.
    3. Go to Transaction MCB_ select SAP BW usage 'Standard' Radio button.
    4. Save it.
    5. Go to Transaction MCNB, enter name of run ‘Stock_init’. Enter Termination date in future. Enter Datasource as 2LIS_03_BX.
    6. Execute the initialisation.
    7. Entries can be found in SETUP Table MC03BFSETUP & MC03BFSETUP.
    8. Run SETUP for 2LIS_03_BF, AND 2LIS_03_UM using TCodes OLI1BW and OLIZBW respectively.
    9. Run the extraction for 2LIS_03_BX in BW.
    10. Compress the request with ‘No Marker Update’ NOT SET i.e. unticked or unchecked.
    11. Run the extraction for 2LIS_03_BF in BW.
    12. Compress the request with ‘No Marker Update’ SET i.e. ticked or checked.
    13. Run the extraction for 2LIS_03_UM in BW.
    14. Compress the request with ‘No Marker Update’ SET i.e. ticked or checked.
    Steps 1 and 2 shall be executed in Development and transported to production and step 3 onward should be carried out in Production itself with Posting Block.
    Thanks in advance.
    Regards
    PB

  • Inventory Management - Snapshot Scenario

    Hi,
    We are implementing the Snapshot scenario for inventory management based on the "How to Handle Inventory Management Scenarios in BW" and am facing the problem on the point 51 in the document.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    "51. Create a start routine to multiplicate the old row with minus 1, set the record mode to R “Reverse-Image” and create a new row with the month “12.9999”, if the ...."
    the logic seems to be incomplete. Has anyone implemented this scenario. Please let me know what is the missing piece.
    Thanks
    RK

    I am only in design phase. I have post this message because the How to guide is old and I would know if someone have find a new solution ( with less step to reduce development phase).
    As not recent solution is provided, I use the how to guide and adapt because I have more indicator to implement in my solution.

  • Posting block Question in How to handle inventory management scenarios

    Hi all - I have a question in document
    <b>"How to...Handle Inventory Management Scenarios in BW"</b>
    can anyone please tell me what a posting block is in this document...
    also I did not understood what a Validity table is?
    thanks,
    Sabrina.

    Hi Sabrina!
    A 'posting block' period is something that now you are facing in inventory management, but you have to consider it in ALL logistic cockpit flows (what you can see in LBWE).
    This requirement can be easily explained in this way: as you know, to fill a setup table you have to activate the extract structure of the datasource for which you want to run the setup job (otherwise the system says that no active extract structure exists, do you remember ?); but, by doing so with the posting operations open (in other words, users can create new document or change the existing ones), you run the risk that these records are automatically included in the extraction queue (or in SM13 if you are using unserialized method) AND also collected in setup table ! And you will have the same records with the initial load (from setup table) and then the same from delta load (from the queue): a nice data duplication.
    To avoid this situation, a "posting block" (or a "free-posting period" or a "downtime") is requested. No one can post new document during your setup job...
    Hope now is clearer...
    Bye,
    Roberto

  • How to handle inventory management scenario

    Hi All,
    In How to handle inventory management scenario whitepaper, I fail to understand the basic difference between 'Inventory Management with non-cumulative Key Figures' and 'Inventory Management with Snapshots'. Can anyone please explain me the basic difference.
    Thanks
    PB

    Hi Loic
    Can u please see if all the steps listed below are OK.
    While setting up  the IM Scenario
    I have jotted down the steps with valuable inputs from you  and paper 'How to Hanlde IM scenarios'
    Please find the steps below. Kindly review them and let me know in case I have got anything wrong or missed out on anything.
    1. Transfer Business Content Datasources 2LIS_03_BX , 2LIS_03_BF, AND 2LIS_03_UM in RSA5.
    2. Go to Transaction LBWE, Activate Datasources 2LIS_03_BF, AND 2LIS_03_UM.
    3. Go to Transaction MCB_ select SAP BW usage 'Standard' Radio button.
    4. Save it.
    5. Go to Transaction MCNB, enter name of run ‘Stock_init’. Enter Termination date in future. Enter Datasource as 2LIS_03_BX.
    6. Execute the initialisation.
    7. Entries can be found in SETUP Table MC03BFSETUP & MC03BFSETUP.
    8. Run SETUP for 2LIS_03_BF, AND 2LIS_03_UM using TCodes OLI1BW and OLIZBW respectively.
    9. Run the extraction for 2LIS_03_BX in BW.
    10. Compress the request with ‘No Marker Update’ NOT SET i.e. unticked or unchecked.
    11. Run the extraction for 2LIS_03_BF in BW.
    12. Compress the request with ‘No Marker Update’ SET i.e. ticked or checked.
    13. Run the extraction for 2LIS_03_UM in BW.
    14. Compress the request with ‘No Marker Update’ SET i.e. ticked or checked.
    Steps 1 and 2 shall be executed in Development and transported to production and step 3 onward should be carried out in Production itself with Posting Block.
    Thanks in advance.
    Regards
    PB

  • Analysis Process Designer and Inventory Management

    In the How to guide for Inventory Management it mentions that you can you can intialise stock in the Snap shot Cube using the Analysis Process Designer (APD).  Has anyone done this and if so can you explain how or outline some steps? Thanks

    Hallo,
    the APD does`nt be a useful tool for modeling a performant 
    data flow. A lot of SAP BW user think so.
    The performance problems are given by the ddic intern table, using to uploading the extracted data into the apd used wa_table and structures.
    To have the best performance on your scenario, please use the following scenario as possible.
    Step 1.
    upload the extracted data from the psa into a data layer
    there you can reduce and harmonize the data by using a transactional ods
    Step 2.
    build a infoset that joins the data
    Step 3.
    build one query to reducing data and make two copies of ist
    Step 4.
    build a useful data mining model
    Step 5.
    upload the results of the data mining model into a transactional ods
    Step 6.
    link the uploaded data into a infoset ore write back into a standard ods
    Step 7.
    query the data
    If you use this scenario you have a lot of benefits. Better performance, better quality of persistent data and actual and traininged data.
    The recommend next step (if you want a alerting) is to build a reporting agent report - if you have usefull processes in  the query.
    There are a workshop for Data mining and APD, named BW380.
    I hope I helped you.
    Otherwise give me a message.
    [email protected]

  • Inventory Management Data Model

    Can I have a combined Inventory Management Snapshot and Non Cumulative?  By this I mean as follows:
    1.     Use the Business Content model to load to the Inventory Management (0IC_C03) cube on a daily basis (loading delta from 03_BF and 03_UM)
    2.     Create a Snap Shot model which is loaded on a monthly basis using 03_BF and 03_UM
    Thanks

    Hello Niten,
    Absolutely. You can use these two scenarios in combination. In fact, it is highly recommended to use snapshot scenario in combination with non-cumulative model and not as a stand alone solution.
    But you need to evaluate the business requirement before taking the decesion of going with combined solution. Snapshot scenario is used to improve the query prformance.
    Regards,
    Praveen

Maybe you are looking for

  • JSP is not getting displayed.

    Hi experts, I am developing and application , in which the user select a entry from select box and clicks on the button. This should open the 2nd JSP but surprisingly it is not doing that. It just the let 1st JSP on and blinks. The switching between

  • Case #0184201928 - I want an anwser from ADOBE that gives a solution

    Case #0184201928 Tuesday, April 9, 2013  8.52 AM Australia eastern standard time Opened Thursday, April 4, 2013 3:21:24 PM PDT Status Open - Pending Adobe Response Product Creative Cloud Indiv 1.0 Support contract Adobe Support Program Subject not ab

  • Has anyone else noticed that Iphone 3G tray is larger than AT&T's sim card?

    Hello, Just a brief history of my iphone to start. Purchased in December of 09 via Best Buy. About 3 months ago I started to have connectivity issues with the Iphone. I would not receive notices of people calling and my text messages would come 12-48

  • Silent install\uninstall of Photoshop CS4

    Can Photoshop CS4 be silently installed\uninstalled without the source files for 64bit? Since Photoshop CS4 is 3 times the size of CS3 I would like to know if CS4 can be silently installed\uninstalled without using the payloads for the 64bit versions

  • Corrupt AlbumData.xml - no shared pictures

    Hi, I'm referring to this problem here: http://derivadow.com/2006/12/30/iphoto-photos-not-appearing-in-front-row/ it just occurred at my parent's MAC using iPhoto 09: the pictures didn't show up on their Apple TV. After long investigations I found th