INVENTORY REPORT for customer but not consignment company owned

HI Everyone,
I am working on creating an inventory report and sending it out to a customer.
We have a customer who needs to see their inventory we are going to ship. we are making materials for them on an MTS scenario based on a forecast... So the customer before placing a PO should be able to look at the inventory levels we make for them. on a daily basis.... No what I am trying to is execute a program that sends out an inventory report (the programs I am using are( RSMIPROACT and ROEMPROACT)... I try to fill in the fields and save as a variant and we run it as a background job every morning and we send out an idoc to the customer...
The above process is a scenario that still needs to be worked on...
THe customer should be able to look at only his stock and not any other stock....
Now can we use a display of listing/exclusion function to send out the material stock report.... we need to send the total inv as well as the mat numbers... can we acheive it with the listing/exclusion funtion..
Or is there a program that pulls all the data from the tables which store the customer material info record where we maintain all the materials for a customer...
If there i a better way through which this can eb done please suggest me... thank you..
Once again the above stock is not consignent stock... we are manufacturinng based on the forecasts and we need the customer t be able to look at the stock on a daily basis.... Please help...

There is no report / funtionality is SAP to acheive this. Custom program is the only solution. Your logic looks ok, where there is a CMIR maintained, you may pick the total stock from table MARD put into a format/layout and transfer via idoc to the customer.
Thanks & regards
AHP.

Similar Messages

  • Report for delivered but not billed orders

    Hi All,
    I am trying to build a query using logical database to extract all orders for which delivery has been done, but not yet billed. I believe i can extract this data using VAV logical database, but not quite sure if i should use VAV or VFV.
    Can someone let me know, which database to use & also what input conditions i need to maintain to extract only the information which i am looking for?
    Hope my question is clear, await inputs.
    Vivek

    Hi Vivek,
    What I wanted to say that you won't get information from VAV about billing since as far as I know it doesn't contain any relevant table.
    You should try create a query using LIKP-LIPS-(joint type: left outer)-VBRK. This will connect deliveries to billing document, you can also get SO number. Please try this.
    (Sorrowully I don't know which logical database would be good for you)
    BR
    Csaba

  • Inventory Report For Special Stock (Project Stock)

    Dear Sir,
    We are in Make -To - Order scenario and procure the material against  the WBS element . For getting the Inventory List , we use MBBS tcode but it has following limitation :
      a) It give the Stock Status as on date basis . While we need Stock Inventory on a cut off date , say on
          31/Jan/2007 .
      b) We are not able to get the Inventory Report , Material Group wise
    I request to kindly guide me , as how to take the Inventory Report for Project Stock .
    Regards
    B Mittal

    Hi Shailesh,
    Is there any way we can include some extra fields into this MC.9 report - i tried but could not find anything.  Can you please help.
    Regards,
    Laxmi

  • Inventory report for stock category B

    Hi everyone,
    We are trying to generate a customer stock inventory report with stock category B. The table MARD is not displaying any values annwe also looked at table MKOL. Its not giving us any. How do i get the inventory report for this stock type B. Kindly Advise.

    it is customer owned stock. We receiver materials from customer for repair and we recondition them and we give it back. for this we maintain it in stock type B. it is specifically used in aerospace industries. We want to make an inventory report for this customer owned stock in our inventory . i am unable to get the table. Kindly advise

  • Annual tax report for customer/vendor (Italy) - RFIDITCVL program

    Hello,
    we're using the Annual tax report for customer/vendor (Italy) in the ECC 6.0 version but we've the following problems:
    - We only see a list of records in the List error section, where the field "Group" is not valued, so we don't know if the list is really an error list or not.
    - We don't see anything in the results list
    Do you know if there is some OSS Note we can apply or some customizing activity we have to do. Thank you.
    Maria

    Hi,
    Use Report MIR5
    MIR5 - Display List of Invoice Documents
    You can use the report Display List of Invoice Documents (RMMR1MDI; transaction code MIR5) to display a list of the invoice documents.
    In addition to the existing program Invoice Overview (transaction code MIR6), here you have extended selection criteria and display options:
    o   Gross invoice amount
    o   Unplanned delivery costs
    o   Currency key
    o   Exchange rate
    o   Entry date
    o   Entry time
    o   Choice between invoice and credit memo
    o   One-time customer with a one-time account
    In the Invoice Overview program you can also change invoices, whereas in this report you only have display options.
    By entering the following data you can increase your selection criteria:
    o   Entry type
    o   Invoice status
    o   Restrictions
    Output: -
    In the output list, the report displays the numbers of the posted and the parked invoice documents. The system does not display invoice documents that do not have a corresponding FI document, for example, invoice documents that are planned for verification in the background, or that have already been verified with errors.
        From the output list, you can display the following:
        o   Invoice document
        o   FI document or list of FI documents
            If more than one FI document is assigned to an invoice document, then you can display a list of all corresponding FI documents.
        o   List of all follow-on documents for an invoice document.

  • E Recruitment -Candidate applied for job but not reflected candidate name

    E Recruitment
    Candidate applied for job but not reflected candidate name Recruiter Dashboard
    Please any one suggests me what is problem?
    Regards
    Eshwar

    Hello Sri,
    the solution to your first question might be very easy. In EhP 4 the entries in the dashboard do not appear automatically. In most cases you have to refresh the dashboard (be aware this is only effecting the current dashboard work list, not all if you do not use the refresh all button). Soclick the "My new Applications" and then refress this workset.
    If this does not help we will have to look closer into this issue (overall I assume you have EhP4 SP 6 applied).
    For question 2. It is a quite common requirement that an external publication is nearly only based on the posting texts while the internal publication includes much more specific information (org. management, cost center, pay scale group). As you are free in designing you own company specific internal and external publications they can look however you want (in the general restriction what a smartform can do of course). For different publication texts companies create different postings one for internal and one for external publication. The additional information are in some cases entered directly into these texts, in some cases maintained in e-rec fields not needed for other requirements, in customer own fields or directly gathered from the HR core system. It depends a bit on the exact requirement which is the best solution. For the fields you mentioned I'd probably go for OM integration for e-rec (assigning positions to requisition) and get the Information via customer RFC function module directly in the smartform (if the security guys allow the access to the HR system from the e-rec system).
    For question 3. The manager should be able to see the decision maker data overview. Here you can include whatever you want as you can replace it with a customer developed smartform.
    Kind Regards
    Roman

  • QLD -query based customised report for customer aging

    Hello Expert,
    I want to write a query for the QLD  and this report is a customised report for customer statement-aging
    Requirements
    1. The QLD report  query should have selection criteria Posting date range[user must input]
    2. The QLD report  query should have also another selection critreria Customer code[If user input it then report must display details for only that particular customer, if it is blank i mean not inputed by user then this report should display details of all customers with page break., I mean start with first customer.. show details and page break  start second customer show all details  and so on
    Let us sec the QLD details                                                                               
    at the header Level customer detals name/address/balances(3429.4) etc
    Code|| Name||Doc Type || Doc number||Posting date||Debt Amount||Credit Amount||
    C00001  || ABC LtdII AR Inv     || 12/01/2011||12000|| 0
    C00001  || ABC Ltd|| AR Memo|| 12/15/2011||0        || 5600
    C00001  || ABC Ltd|| Incoming || 12/15/2011||0        || 4000
    C00001  || ABC Ltd|| OTHER   || 12/20/2011||1000  || 0
    Summary
    Balance||        0-30         ||  31-60         || 61-90||          91-120          || 121+
    3429.4     3400     200     300     -300     -170.6
    100%     99.14%     5.88%     8.75%     -8.75%     -5%
    Page Break
    at the header Level customer detals name/address/balances(969.4) etc
    Code|| Name||Doc Type || Doc number||Posting date||Debt Amount||Credit Amount||
    C00002  || ABC LtdII AR Inv     || 12/01/2011||15000|| 0
    C00002  || ABC Ltd|| AR Memo|| 12/15/2011||0        || 3600
    C00002  || ABC Ltd|| Incoming || 12/15/2011||0        || 3000
    C00002  || ABC Ltd|| OTHER   || 12/20/2011||5000  || 0
    Summary
    Balance||        0-30         ||  31-60         || 61-90||          91-120          || 121+
    969.4     1440     500     -500     -300     -170.6
    100%     148.55%     51.58%     -51.58%     -30.95%     17.6%
    and so on
    Note #1 If the balances for a customer is zero then I should not be the part of the report
    Note #2 In the existing report system is showing summary  details only for the date range , but here I am looking for all dates
    Thanks
    Arun K Singh

    Hi Arun,
    Try this...
    SELECT T1.CardCode, T1.CardName, T1.CreditLine, T0.RefDate, T0.Ref1 'Document Number',
         CASE  WHEN T0.TransType=13 THEN 'Invoice'
              WHEN T0.TransType=14 THEN 'Credit Note'
              WHEN T0.TransType=30 THEN 'Journal'
              WHEN T0.TransType=24 THEN 'Receipt'
              END AS 'Document Type',
         T0.DueDate, (T0.Debit- T0.Credit) 'Balance'
         ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')<=-1),0) 'Future'
         ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=0 and DateDiff(day, T0.DueDate,'[%1]')<=30),0) 'Current'
         ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>30 and DateDiff(day, T0.DueDate,'[%1]')<=60),0) '31-60 Days'
         ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>60 and DateDiff(day, T0.DueDate,'[%1]')<=90),0) '61-90 Days'
         ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>90 and DateDiff(day, T0.DueDate,'[%1]')<=120),0) '91-120 Days'
         ,ISNULL((SELECT T0.Debit-T0.Credit WHERE DateDiff(day, T0.DueDate,'[%1]')>=121),0) '121+ Days'
    FROM JDT1 T0 INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode
    WHERE (t0.BalDueCred !=0 or T0.BalDueDeb != 0) AND T0.RefDate <= [%1] AND T1.CardType = 'C' and T0.TransType in ('13','14','30','24')
    ORDER BY T1.CardCode, T0.DueDate, T0.Ref1
    Thanks,
    Srujal Patel

  • Projected Stock-Inventory Report for APO

    Hi All,
    I have to develop Projected Stock-Inventory Report for APO.
    I need to fetch data from APO and need to store it in BI for reporting purpose.
    Do you have any idea about how to get the required data from APO system?
    Where does stock data resides along with projected stock in any SNP aggregate or any table?
    Regards,
    Krunalkumar Rathod

    Hello,
    I suppose you mean you want to export the data "stock on hand" in SNP planning book to BW.
    This key figure is an auxiliary key figure that calculated by macro. The data is only diplayed in the planning book but not saved to any database table or liveCache.
    In order to save it, you can add your own time-series key figure to save the stock on hand. And you'll need to create your own macro to calculate or copy from the auxiliary key figure.
    A good way is you can  create a macro by copying the "stock balance" macro and just change the stock on hand key figure to your own time serires key figure. Then when you need the data, you can run the macro in background job. By doing this, the stock data will be saved to the time series key figure. Then you can extract it from liveCache as normal key figures.
    Please notice the time-series key figure must be assigned to correct aggregates in an SNP planning area.
    Best Regards,
    Ada

  • Inventory report for Previous Periods

    Hi Experts ,
    I would like to have an inventory report for all materials in a Particular Plant for the Periods Sep 2009 and Sep 2010 . Could you please help me in providing the reports for the same .
    Thanks
    Moderator message: Basic frequently asked question - Please search forum for answers and read the docu in help.sap.com 
    See as well our rules of engagement: http://scn.sap.com/docs/DOC-18590
    A good way to search the forum is with google. See this blog with details for a good search
    http://scn.sap.com/community/support/blog/2012/04/16/getting-the-most-out-of-google-optimizing-your-search-queries
    This blog describes how to use the SCN search: http://scn.sap.com/community/about/blog/2012/12/04/how-to-use-scn-search
    The discussions are not a replacement for proper training
    Thread locked
    Message was edited by: Jürgen L

    You can well run these reports on background..
    Go to SE38 Enter the program name "J_1HSTCD"
    Then press Execute / F8.
    Enter you selection date as 01.09.2009 to 31.09.2010 and enter the plant and leave the all selection as per SAP standard..
    Then press F9 or Go to Program

  • Report for Customer wise Payment

    Hi All,
    I want a report for Customer who has been maintained on Cash Basis ( One Time Customer). The customer are sold on cash so there is only one entry passed inm FI that is
    Bank A/c Dr
    To Sales A/C Cr
    That means we donot have record customer wise in SAP. But since billing document is created for these customers too, we might be having some report.
    I want if there is any report in SD or FI which can give e cutomer wise payment details
    Thanks in Advance. I am quite liberal in assigning points.
    Rg
    VK

    Hi,
    You can write a custom report to pull the data , say from BSID, BSEC with documnetnumber as key field.
    Hope this helps.
    Thanks,
    Vamsi

  • Annual tax report for customer/vendors(RFIDITCVL

    Hello,
    I am running Annual tax report for customer/vendors and it appears no data in the list.
    Then the system says:
    "1   files created successfully"
    Why is there no data in the list?
    Thank you very much

    Hello,
    I have tried S_ALR_87019598 and S_ALR_8709598 and they do not exist.

  • How to  Export/Import "report for the query" to another company

    Hello,
    I do this:
    1.create query in SQL analizer
    2.copy paste into SBO query generator and save
    3.create report for the query
    Then, How to Export/Import "report for the query" to another company ?
    Thanks for your HELP.

    Look for SAP Note number 600813
    That's the note Adele means, I guess.
    <b>Edit (@13:18)</b>
    The direct link:
    https://websmp101.sap-ag.de/~sapidb/012006153200000183292003E.ITF
    ---- Replace *SOURCE* with the source database name.
    ---- Replace *DEST* with the destination database name.
    insert into [*DEST*].[dbo].[RDOC]
    select [*SOURCE*].[dbo].[RDOC].*
    from
    [*SOURCE*].[dbo].[RDOC],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf]
    where [*DEST*].[dbo].[cinf].[lawsset]=[*SOURCE*].[dbo].[cinf].[lawsset]and [*DEST*].[dbo].[cinf].[version]=[*SOURCE*].[dbo].[cinf].[version] and [*SOURCE*].[dbo].[RDOC].[Doccode]NOT IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
    insert into [*DEST*].[dbo].[RITM]
    select [*SOURCE*].[dbo].[RITM].*
    from [*SOURCE*].[dbo].[RITM],[*DEST*].[dbo].[cinf],[*SOURCE*].[dbo].[cinf] where [*SOURCE*].[dbo].[RITM].[Doccode] NOT IN (select Doccode from [*DEST*].[dbo].[RITM])AND [*SOURCE*].[dbo].[RITM].[Doccode]IN (SELECT Doccode from [*DEST*].[dbo].[RDOC])
    Hope it helps...
    Grtz, Rowdy

  • Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all??  Looks like I can set it for one but not others.  All, one, or nothing

    Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all??  Looks like I can set it for one but not others.  All, one, or nothing

    Hey Eric,
    Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
    Again, thanks for trying, it is appreciated.

  • How can i check for posted but not yet commited changes in a form

    Dears
    I make changes programmatically in a form then i post it using (Post built in).
    If the user exits the form, i make check for any changes in the form to commit it using the system variable :system.form_status
    Unfortunately the value of this system variable is 'Query' not 'Changed' because of using the post built in.
    Is ther another system variable ( or any another way ) that check for posted but not yet commited changes in the form ?
    Thanks a lot
    Mostafa Abolaynain

    I had faced similar situation. Using of package variable which identifies, what is the user's latest action.
    This is just a workaround.
    Capture what the user has performed into a variable say, PKG_VAR.ACTION,
    This will be assigned values like List L, and Create C, Update U and Saved S.
    If commit is executed,assing the status S to the variable.
    So while closing,
    IF :system.form_status = 'CHANGED' or PKG_VAR.ACTION in ('C','U') THEN     
    -- validate the data, n perform commit.
    else
    -- just close the form.
    end if;
    Regards
    Deepz : )

  • I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

    I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.)  It happens for about 10 of 30/40  files approximately . Thank you, Kathryn

    I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

Maybe you are looking for

  • This is going to be a tad long: Cannot Get Adobe XI to download

    Okay, so I originally did the 30 day trial for All of the Adobe apps in Creative Cloud and once the trial was up, our company wasn't ready to buy.  When I tried to open a PDF, it would ask me buy the software so I couldn't open up any PDFs. I deleted

  • MBP15 2009 won't recognize Panasonic TV

    Hi, I have a MBP15 that since I've installed Lion (I'm up to date and have 10.7.2) has not been able to connect from my mini-display HDMI convertor by Moshi to my Panasonic Viera television.  It had always worked without a problem before the upgrade.

  • CUP 5.3 SP09 - delete connector

    Running CUP 5.3 SP09...attempting to delete connector (not used in any roles or in "User Data Source") and I get the error msg "Cannot delete since referred in User Data Source".  Both items in User Data Source are listed as UME.  Is this a SP9 error

  • Can't stream on Netflix.

    Having a problem with Netflix when I try to view movie on streaming. Error code N8103-103 keeps coming up. Worked with Netflix tech and did all the things suggested. Still get error code and cannot view videos. Has anyone had this problem? I dumped S

  • Email Button to Submit 1 page of Multipage Report

    I currently have a multipage pdf designed that I would like to be able to have a button at the end that will just email the last page of the pdf. Can this be done? Thanks, Wendy