Inventory reports are not giving output while executing in rsrt

Hi,
I am running inventory reports in RSRT. But for every report when i run, a debugger comes and its not showing any output. And the break-point in it is a standard one. so atleast standard reports must execute, but they are not giving me any output.
Please tell me what can i do to resolve the error.
Roma

Hi Roma,
Just press F8 key and keep executing report .
Usually Bex Show this when either there is some problem with Report or Some variables you have  used in query  or you have not sufficient memory .
Run the report and you will definately get some ides.
key F6 to go to next line of execution
key F8 to go to next breakpoint .
Regards,
Jaya Tiwari

Similar Messages

  • XML report is not giving heading while running from application.

    Hi Everybody,
    We are facing one issue in xml.
    XML report is not giving heading while running from application.
    Pls suggest.
    Regards
    Sreehari.
    Edited by: user1762471 on Sep 27, 2010 10:48 PM

    What application you mean?

  • Inventory Reports are not executing in Quality Server

    Hi All,
    I have done two reports  ( 1. Stock Overview & 2. Stock Ageing ) in BW-DEV and executed successfully but after moving transports to BW-QA, I am getting Zero values for Stock Overview & for Stock Ageing, I am getting errors like "Sub Routine Call failed, Could not find the form SET-ICFL, CY_SY_DYN_CALL_ILLEGAL_FORM & UNCAUGHT_EXCEPTION.
    This is for your kind Information:
    1.  I uploaded data properly to Inventory ZIC_C03
    2. I verified data in Cube, the data is available
    3. SAP BI 7.1
    Please guide me to over come the above issues.
    Thanks
    Sreeni
    Edited by: sreenivasulu.gandi on Jan 24, 2012 5:48 PM

    Hi,
    It looks you are not in developer role so it is asking access code. If you want access code you can ask Basis team they will provide based on the policies.
    Regd your issue are you getting this error for particular report or any report? Check RFC connection between Bex and BI server. You run the same report in using RRMX or RSRT, if you are able to see the output then ask your Basis team look this issue or check the Note 1600067.
    Thanks
    Riyez

  • Report not giving Output correctly

    hi all
    The problem is about Pending invoice report. But this report is not giving output correctly.
    Plz help me to solve the problem.
    Thanks
    Subhasish

    Hi Mishra,
    Invoice output is coming correctly- assuming you have calculation error then check the print program assigned to your invoice output condition type. It must be having some logic error.
    If the issue is with improper formatting then check the layout assigned to your invoice output conditon. You can check both the program and layout assingment to ouput condition at NACE transaction.
    This is regular task which abapers can do with ease. so please take their help. They can just do a simple debug to understand the issue.
    regards
    sadhu kishore

  • Crystal Report Not giving output

    GoodMorning Gurus!!!
    I created a crystal report in XI R2 based on a Multiprovider. Though the Multiprovider is active and the DSO has the Data correctly activated, the crystal report is not giving the output.
    Could someone please tell the reasons...also i have checked the server connections as well..they are right.
    Please give me the options to chk some more criterias.
    Thanks & Regards
    Jiten

    not answered

  • Early Watch Reports are not getting generated.

    Hi Experts,
    I'm new to Solution Manager.
    We were getting EWA report regularly till last month in solution manager.
    But for the past one month the reports are not getting generated and I'm getting the following error message.
    Kindly help
    The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
    Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
    Typical sources of errors are:
    The RFC connection for the SAP Solution Manager system is not working.
    The 'Task Processor' background job, which collects the session data, has been changed.
    Problems arose while data was being collected (see the detail log for the task that collects the session data).
    A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
    Session number: 1000000000704
    Thanks,
    Shanahas

    Hi,
    The maintanance package is getting executed everyday. However, it is throwing some error.
    I have checked the RFC connection and they are working fine.
    Here with I'm attaching part of the log i got for the maintance package error.
    Pls help
    Maintenance Package completed
    > Maximum number of retries reached ( 0003 )
    Updating license data completed from destination SM_SOMCLNT100_BACK [Maintenance Package]
    Error updating license data from destination SM_SOMCLNT100_BACK [Maintenance Package]
    Retrieval of license data failed from destination SM_SOMCLNT100_BACK
    > ( AGS_MK_GET_MAINT_KEYS )
    > Function module for retrieval of license data not available on Solution Manager
    Updating license data started from destination SM_SOMCLNT100_BACK [Maintenance Package]
    Error refreshing service definitions from destination SM_SOMCLNT100_BACK
    > Password logon no longer possible - too many failed attempts
    > error reading function module interface BDL_DO_SESSION_REFRESH_NEW from SM_SOMCLNT100_BACK
    > Re-entry after error
    Refresh of service definitions started from destination SM_SOMCLNT100_BACK [Maintenance Package]
    Refresh sessions from destination SM_SOMCLNT100_BACK finished [Maintenance Package]
    > Sessions cannot be refreshed from destination SM_SOMCLNT100_BACK ( SOM , 0020312095 )
    > Password logon no longer possible - too many failed attempts
    > error reading function module interface DSWP_API_SESSIONLIST_GET from SM_SOMCLNT100_BACK
    Refresh sessions from destination SM_SOMCLNT100_BACK started [Maintenance Package]
    Refresh sessions from destination SDCC_OSS finished [Maintenance Package]
    > Sessions are up to date
    Refresh sessions from destination SDCC_OSS started [Maintenance Package]
    > Not due, due every 7 day(s), last successful run 10.07.2011 21:20:24
    Delete old session and log data :
    Maintenance Package started
    Thanks,
    Shanahas

  • Reports are not called from form in browser plz help

    Hi,
    I have installed 9iAS+8.1.7 database on the same machine with NT4 server.My system's forms(.fmx) are running well but my reports are not running from my main form.i call reports from the
    from as,
    Run_Product(reports,'..\iReports\xglrxx12.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);
    Actually want to know the report's setting when calling from the from in a browser(environment variables,virtual paths etc.).
    My database is installed in drive E:\8idb_home\ and 9iAS is on
    G:\9iAS_home\.My systems .fmx & .rep files are in "iforms" and "ireports" folder respectively.
    Plz help!
    Many thanks!

    Hi,
    First of all thanks to Vincent Botteman for solving the prob.
    Yes when i changed my call of run_product by excluding the path i have specified when calling from form it then makes a result.
    Also specified the entry of your reports .rep files by giving path in reports60_path registery variable as,
    Run regedit-->Hkey_Local_Machine-->Software-->Oracle here give the full path of your .rep files as an first entry in reports60_path variable.And finally not mention the path when calling reports from form as,
    Run_Product(reports,'xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Correct way.
    Run_Product(reports,'..\iReports\xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Wrong way.
    Regards!

  • Oracle 9iAS R2 - reports are not working  - JSP Error

    dear All
    We are having issue in our Oracle 9i AS R2, the reports are not working, this thing happend suddenly , while runing any report the following messages are coming
    ==============
    500 Internal Server Error
    OracleJSP:
    JSP Error:
    Request URI:/repdemo/examples/Tools/test.jsp
    Exception:
    org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
         at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java:79)
         at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java:147)
         at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java:196)
         at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java:365)
         at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java:493)
         at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java:356)
         at oracle.reports.engine._EngineReportStub.doneReport(_EngineReportStub.java:36)
         at oracle.reports.definition.RWJspProxy.doneReport(RWJspProxy.java:261)
         at oracle.reports.definition.RWReport.done(RWReport.java:1087)
         at oracle.reports.jsp.ReportTag.release(ReportTag.java:398)
         at oracle.jsp.runtime.OracleJspRuntime.releaseTagHandler0(OracleJspRuntime.java:1109)
         at oracle.jsp.runtime.OracleJspRuntime.extraHandlePCFinally(OracleJspRuntime.java:1213)
         at examples.tools._test._jspService(_test.java:292)
         [SRC:/examples/Tools/test.jsp]
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
         at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
    -=================
    please help to resolve this issue.
    thanks in advance.
    regards

    Dear All
    Just to share the solution of the problem.
    We restarted the XServer which is on the other machine then Oracle 9i AS Middle Tiere and Infra. Once we restarted the XServer machine, and restarted the reports server , every thing back to normal.
    regards

  • Error the actual price could not be determined while executing CKMLCP

    Hi!
    we are facing the problem while executing CMLCP, the error message is "The actual price for 10VN000012/MHR could not be determined" ( error message number CKMLLA102).
    Our scenarios is as below:
    we have 4 activity types out of which activity type "MHR" are used only for Indirect activity allocaiton tracing factor that means all service costs from service cost centres will be distributed to production cost centres in the ratio of actual quantity confirmed for MHR activity type.
    for this activity type we will not have any actual cost distribution, so there will not be any actual cost for this activity type.
    So, as actual quantity is confirmed during production process and while executing CMLCP is expecting actual price for the same ( we are executing KSII for actual activity price calculation before costing run).  is there any enhancement to avoid this error, because our client don't want to allocate cost to this activity type.
    regs,
    ramesh

    Hi Ramesh,
    Message CKMLLA102 is standard system behaviour when the actual
    price of an activity is zero because cost center accounting does not
    allow actual prices to be zero.
    Unfortunately the system can't distinguish an actual activity price
    of zero from a not yet calculated activity price, so for activities
    with actual price zero the message CKMLLA 102 is sent.
    Have you check the SAP note 361379?. It provides you some options to overcome
    the issue.
    Best regards,
    MLM

  • Client not modifiable message while executing t-code ops7 and ops6

    Hi Guru's,
    I am getting "Client not modifiable message while executing t-code ops7 and ops6" in Unit test and Quality client.
    Pleae help me to resolve the error.
    Regards
    Sasikanth Reddy

    Hi
    Copy of the information I found regarding this issue:
    It is possible to allow the maintenance of 'Customizing'-tables in a       
    production client, even if the client is set to 'not modifiable'.          
    Normally this should be the case for tables TCJ04 (responsible person)     
    and TCJ05 (applicant).                                                                               
    Please could you check the settings in your system and change it if        
    necessary:                                                                               
    Transaction SE11:                                                                               
    Table TCJ04: delivery class should be set to 'C'                           
          TCJ05: delivery class should be set to 'C'                                                                               
    Transaction SOBJ -> Maintain                                                                               
    Position on V_TCJ04: Category should be 'CUST' field 'current settings'    
    should be marked.                                                                               
    Position on V_TCJ05: Category should be 'CUST' field 'current settings'                                                                               
    Please also check that your client is defined as 'PRODUCTIVE' via          
    transaction SCC4 (field client role).                                                                               
    I would also recommend that you review the attached notes with reference   
    to the usage of customizing setting "current settings": Nr. 77430,         
    Nr. 135028, Nr. 356483. These are also relevant for your release.          
    Kind regards,
    Zhenbo

  • The developers at Mozilla are not giving me what I want

    The developers at Mozilla are not giving me what I want. What I want is a program that doesn't slow down and then crash when I have too many windows open, which is what both 3.5 and 4.0 have done. Instead, I am getting new features that I don't want, like my tabs on top (an illogical place to put them) and a big orange button which forces me to make an extra click when I want to open a menu.
    The last stable version of Firefox was version 2. When I bought a new computer and got Windows Vista, version 3.5 wouldn't even open. When I upgraded to Windows 7, version 3.5 would open, but it slowed down and crashed constantly if I had too many windows open. Version 4 is doing the same thing, but this version freezes repeatedly before it crashes, giving me the message "(Not Responding)".
    So what do I do? Well, I go on the Mozilla site to send them a message, and I am confronted with condescending smiley and frown faces and a message box that is limited to 140 characters. So then I tried to find the forums, only to find no link at all to the forums. So not only doesn't the program work, but I am not allowed to send detailed feedback.
    What was once a good product is now a piece of junk, and the people who are developing it don't seem to care that it doesn't work, and they treat their users with nothing but contempt.

    Right-click in the empty space near the orange button and deselect "Tabs on Top" to get the tabs back to where they used to be.
    For the orange button, apparently this addon will get rid of it: https://addons.mozilla.org/en-US/firefox/addon/app-button-remove/
    I haven't tried the above addon because I happen to like the new button. (I also had the TinyMenu addon installed on previous versions.)
    I had a ton of problems with random crashes in 3.6, but in my experience 4 is worlds better. I've been using it for about a month and only had two crashes, while 3.6 was crashing almost every day. What addons do you have installed? It could be that your crashes and freezes are being caused by one of the addons.
    I know what you mean about Firefox developers, though. I have been increasingly disillusioned with their tendency to label bugs as new features, and if 4 hadn't been such an improvement for me, I probably would've switched to Chrome.

  • Reports are not posting with report repository webserver configured for Sin

    Hi Everyone,
    We have configured Single Signon on our Test environment (UADB1) using Sun Authentication Manager. Everything went well, we can login using our LDAP accounts except for one thing. The reports are not posting to the report repository.
    Our setup goes like this. We have used only one webserver for login and for report repository purposes. SSL certificate was configured in the webserver and we are using https in the report node. Both URLs https://dv001.test.com:8450 and http://dv001.test.com:8400 were configured for Single Signon.
    Report Node Definition
    Node Name: uadb1
    URL: https://dv001.test.com:8450/psreports/uadb1
    Connection Information
    https
    URI Port: 8450
    URI Host: dv001.test.com
    URI Resource: SchedulerTransfer/uadb1
    Below is the error I am getting. If I will use another webserver which is not the Single Signon configured as report repository the reports are posting. So, I am thinking this has something to do with the Single Signon setup and SSL. ANy idea? Thanks.
    PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) 1. Process Instance: 9499/Report Id: 8465/Descr: Process Scheduler System Purge
    PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) from directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_9499
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) (JNIUTIL): Java exception thrown: java.net.SocketException: Unexpected end of file from server
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) HTTP transfer error.
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) Post Report Elapsed Time: 0.2300
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) =================================Error===============================
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) Unable to post report/log file for Process Instance: 9499, Report Id: 8465
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Process Name: PRCSYSPURGE, Type: Application Engine
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Description: Process Scheduler System Purge
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_94

    Duplicated thread : Reports not posting if using Single Signon webserver as report repo
    Nicolas.

  • Reports are not able to run coz of Block Corruption

    Hi all,
    I have reported some Oracle finance reports are not running.
    Once i got the call i looked into the user trace file, there i found the below :
    Corrupt block dba: 0x2100f345 file=33. blocknum=62277. found during buffer read
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2100f345 file=33. blocknum=62277. found same corupted data
    table scan: segment: file# 15 block# 84
    skipping corrupt block file# 33 block# 62277
    Corrupt block dba: 0x2100f346 file=33. blocknum=62278. found during buffer read
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2100f346 file=33. blocknum=62278. found same corupted data
    table scan: segment: file# 15 block# 84
    skipping corrupt block file# 33 block# 62278
    Then i try to find out which table is affected by the below queary :
    SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 62278 between block_id and block_idblocks -1;+
    SEGMENT_TYPE      OWNER
    SEGMENT_NAME
    TABLE             GL
    GL_JE_LINES
    So this above table GL_JE_LINES is the affected table is init.
    Now what is the action i have to take. In this database there is no archive log enabled and version of this database is 7.
    Can any one sugges me what is the action i have to take now.
    Regards
    Hamid

    DB version :
    SQL> select * from v$version;
    BANNER
    Oracle7 Server Release 7.3.4.3.0 - Production
    PL/SQL Release 2.3.4.3.0 - Production
    CORE Version 3.5.4.0.0 - Production
    TNS for IBM/AIX RISC System/6000: Version 2.3.4.0.0 - Production
    NLSRTL Version 3.2.4.0.0 - Production
    Alert log :
    SID>tail -f alert_SID.log
    Tue Sep 25 14:35:03 2012
    Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
    Tue Sep 25 14:35:03 2012
    Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
    Tue Sep 25 14:35:03 2012
    Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
    Tue Sep 25 15:09:18 2012
    create tablespace tbs datafile '/stage/software/APRD/oradata/tbsnew.dbf' size 10                                                                             0m
    Tue Sep 25 15:09:27 2012
    Completed: create tablespace tbs datafile '/stage/software/AP...
    Trace file :
    SID>tail -f ora_84426_aprd.trc
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2101d366 file=33. blocknum=119654. found same corupted data
    table scan: segment: file# 15 block# 84
    skipping corrupt block file# 33 block# 119654
    Corrupt block dba: 0x2101d367 file=33. blocknum=119655. found during buffer read
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2101d367 file=33. blocknum=119655. found same corupted
    For this above :
    SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 119654 between block_id and block_id+blocks -1;
    SEGMENT_TYPE      OWNER
    SEGMENT_NAME
    TABLE             GL
    GL_JE_LINES
    Regards
    Hamid

  • Reports are not run in WAN using OAS10g R2 on MS Server2003? urgent help

    My Forms and Reports was run successfully using Oracle AS10gR2 installing on Win XP on Server in my LAN and WAN environment. So every thing is working fine using Win XP on my server Machine.
    But when I install MS Server 2003 and Oracle AS10gR2 on my server machine. Forms and reports are run successfully in LAN but in WAN forms are run successfully and reports are not running?
    Please send me the solution on urgent.
    Thanks.
    Shahzad

    Hi Paul,
    We recently upgraded our SCCM 2012 R2 servers to OS 2012 R2, Now i could not able to see the path you mention in your blog.
    mofcomp.exe “C:\Program
    Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof”
    Bear in mind that the above command is for SQL Server 2008 and it assumes that SQL is installed in its default location.
    The command for SQL Server 2012 is:
    mofcomp.exe “C:\Program
    Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”
    I can only see D:\Program Files (x86)\Microsoft SQL Server\100\<Below
    folders>
    DTS
    SDK
    Tools
    srkr

  • Reports are not matching

    Hi,
    There is a reporting problem with one of our projects. We use reports S_ALR_87013542 (Display Actual Cost Line Items for Project) and CN41(Structure Overview). The balance being displayed by these two reports are not matching. Why the different amounts are showing up in these two reports and how do I find out the correct amount which still remains in the Project.
    Your suggestions/inputs will be highly appreciated.
    Regards,
    Bala

    Hi,
    Thanks for your inputs. I have 2 queries here...
    1. Whether the reports S_ALR_87013542 & CN41 are same displaying the same information?
    2. How can I check the Balance amount still remaining in the project? Is there any report?
    Thanks & regards,
    Bala

Maybe you are looking for