Invisible lines on

My Creative MuVo v200 came and when turned it on there are some missing Lines on LCD, what can i do?I?ve alredy sended it to Creative but when it came it was same as when i sended..waf?
Pls , help me

I've the last firmware version and lines still there..maybe with an older version?I dont knowMessage Edited by claudiosantos5 on 05-28-2005 09:37 AM

Similar Messages

Invisible Lines showing on Export

Hello,
I have done quite a bit of research before posting this however if I missed an article about it feel free to link me. I have designed artwork that uses lots of colors and lines. Everything was pretty much designed with lines and shapes and then I used live paint to paint in certain sections. The artwork looks perfect when exported as a GIF and it appears fine in Illustrator. The problem happens when I export the document as a PDF. When I export it as a PDF, tiny white lines show up where I have invisible lines in Illustrator. These invisible lines were put there in the first place so I could have set regions for the live paint without them showing. I'm not sure why they are showing up when I export.
I have tried multiple PDF settings and also tried flattening the layers and attempting to use Transparency Flattener Presets and export it as a PDF 1.3 but it is still greyed out in the export options when I try.
I've attached a screenshot of the PDF after it has been exported to see the lines. You will notice black lines and thicker white lines (like the one at the top), these are intentional. the ones that are undesired is the thin one near the bottom whre you can see theres a break point in color and then multiple ones going up. Deleting these with live paint selection, expanding the art, using direct selection tool to delete all ruin the art flow or do not work.
Exported image:
How it looks in illustrator:
Thanks!

They appear at any zoom.
The last one is how it appears in Illustrator.
These are going to be printed for cover art and more material but as of now I need a nice PDF to send out so it can be zoomed in.
Interesting enough, I just checked on another computer using Adobe Acrobat Reader, and to your point they do not show up. So it appears they are only showing up when I view the PDF on my Mac using Preview. I also viewed it in Safari and Chrome and they showed up there as well.

SVG Invisible Lines

I have a series of SVG files that I want to play with and then convert to tif. When I open them in illustrator CS2 the strokes are huge and the rest of the file is tiny. I have already dealt with this by developing a neat script to fix all the scaling issues. My problem is now that some of the lines appear to be invisible but they are still present. Is there some way to force them visible? I could easily set all strokes to a certain value so that the lines would appear but I would rather not do that as different lines have different strokes. For now I have to go through each file and assign them strokes by hand. Any help on this issue would be appreciated.

Bruce, I don't use SVG and there for know very little about it but this opens the file for me…
#target illustrator
var svgFile = new File('~/Desktop/Testing.svg');
var docRef = app.open(svgFile, DocumentColorSpace.RGB);
with (docRef) {
// do stuff here

My iPad screen appears to be unresponsive in an invisible line noticeable when using various apps.

My iPad seems to have an unresponsive lnvisible line down the centre so when playing various apps such as words with friends you can't move a letter tile across that line. Occasionally the screen goes crazy like a hundred buttons are being pushed at the one time and it flicks between different screens despite the screen not being touched.

Hm... That's very strange. Are the apps made by the same developer? If so, it may have something to do with that. There may be a fault in the programming.

Invisible lines showing and Disappearing in InDesign when Printed

This problem does not happen in Adobe CS4 products and I recently switched to Adobe CS6 indesign and photoshop. I keep running to many problems (well its more than when I worked with CS4 products).
I'm asking this because clients keep sending me horrible 72 dpi rasterized files. How do I deal with it if the program deals with this differently?
I know this has been asked before I think but what if the files are coming from the client's side?
The left circle is the original pdf file the client has sent me. The right circle is when I placed the file in Indesign CS6.
Except that the logo is rasterized. The rest is vector.
The left is rasterized, exported from indesign using 100 dpi. Usually my customers send in files that are 72 dpi. And then I have to manually create bleeds on them. The right is an exported pdf.

What are you expecting? The original files you're getting are not suitable for print.
that said, how are you outputting these files?

Logical diagram's relation lines invisible

In my logical diagram and its subviews, a few of the lines (maybe 10%) representing relations aren't appearing between the entities. The relations exist and appear to be defined just as the ones that do appear. In "Show/Hide Relationships", they're flagged as selected, and I've tried clicking them off and on but it doesn't help. In Preferences=>DataModeler=>Diagram=>Format, I've tried messing with the line widths to see if the change would affect the invisible lines, but no. When engineered to a relational model, the corresponding foreign key's lines do appear. If I create a subview from the entities that have relations between them, the lines don't appear on the subview either. If I change the logical diagram's background color to red, the relations do appear in white (or maybe yellow), though in the narrowest width. (That is, if I change the line width to fat and blank in Preferences, the 90% of the lines that usually appear are there in fat black, but the usually invisible ones are thin and white/yellow.)
How can I get the missing lines to appear? (SQLD 3.3.0.747)

I guess all I needed to do was report it here in order to figure it out!
How I fixed them: Set diagram color to red so that they'd be visible. Right-click the now-visible line to bring up a submenu. Under Format, "Use default" was clicked off. Click it on.
How they managed to become un-default, I don't know, but they're better now. I'll mark this answered but leave this here in case someone else stumbles into the same problem.

Magic wand tool that will select broken-line shapes?

I'm an illustrator... working in both digital & real artwork.
I work mostly in Photoshop CS, but I have been searching for a solution to a digital problem that I can't quite seem to find using either Photoshop or Illustrator.
What I wish to do is scan a pencil drawing and then create selected shapes in a quick and easy method using a magic wand tool.
But it needs to be a magic wand tool that will select an area drawn from a series of broken lines. Photoshop will only select shapes that are 100% intact, so I wind up having to spend lots of time searching to repair broken lines before Photoshop selects just that one area.
I KNOW that such a program exists... because I recall there used to be such a program. It was a free dowloaded program that I got once, way back around 1998. I think it came from Australia... and it was a basic digital paint program of some sort. I can't recall the name.
It allowed one to quickly click and select an area from within a shape drawn with broken line segments...
Does anyone know of any program (hopefully for Mac) that allow this sort of selection?
This would save me hours of frustration. I can't believe Adobe hasn't come up with something like this already.
Thanks...
John Nez
www.johnnez.com

Gerno
I doubt that I will get to trying the proposed method on that sample image this weekend. I can make a few quick comments, however.
Like numerous Photoshop tools, the success of Illustrator tools like Live Trace and Live Paint are very image dependent and some experience helps. Here are some comment on the three steps needed.
First, the Live Trace step must be done well. There are a boat load of parameters for this process. For the subject image my guess would be to start with a preset and the one I would choose would be comic art.
Secondly, once you make a live paint group you have to have automatic gap detection checked (turned on) and you choice of predefined or custom gap sizes specified. You will then see where the gaps are automatically found and fixed and the gap options dialog box will tell you how many have been found. If you like what you see you can just start painting. Usually, however it is an iterative process of painting some of the areas and then resetting the gap detection and painting again. At any point you can automatically close the paths (but you cannot go back), change the settings to auto detect even larger gaps and try again.
Third is the manual phase. If lucky you will have none of this. On the subject image, however, I can see that some of this is required. To preserve the artistic content of the original one draws a line in the very big gaps having no stroke or fill (invisible line)and then you use the live paint bucket. While the above sounds like a lot of work, it can go very quickly with many drawings.
JN
>That's why I think Adobe ought to work on designing a 'smart magic wand tool'... that could select imperfectly closed shapes.
The Live Paint tool in Illustrator does this. It automatically detects gaps and lets you paint as if they were not there.
Paulo

Line on the left side of my screen

Hi, i have a 2.4ghz macbook white, it fell from me recently but before that i noticed an almost invisible line on the left side of my screen, it wasnt broken or anything, after it fell the line became more visible, it turned into green and sometimes two lines, but now it is a thick white line that can cover 1 letter...
i ran the hardware test and an error occurred 4SNS/1/40000000 TCOD-100.125
Thanks for your help

I had line(s) on my screen that would not go away and I only found one solution. Well, they would go away when I tried the Genius Bar (the only bar I hang out in these days). Anyhow, the lines were vertical 80%-90% of the time no matter what I was doing. Mostly one, sometimes 2, rarely 3. They even faded in and out when I was just sitting there! I took it to the apple store once and I couldn't show it to them. I took it home to see if it could get worse. Fearing it will eventually just fail as soona s my wrranty expires in teh end fo Feb, I took it in again. They are going to replace the logic board, but they have to order it then replace it; which takes a couple of weeks at least.
So, the only solution was to replace the board. Oh, and if you can't prove it to them because the iMac seems to know the "doctor's office", just take a photo of the screen problem and take it in. That will be evidence enough.
Applecare is great!

In List View, how can I move an item from within a subfolder up to the top level of the window's parent folder?

Up 'til now, from System 7.1 to Tiger—I skipped Leopard—you simply dragged the item onto the folder window's titlebar (since that folder's icon was, naturally, not in its own window) and BINGO! there it was, at the top level. Nothing I can think to do in Snow Leopard seems to work.

Thanks. Most definitely does, although when experimenting I found the left window edge was closer, and 'scrubbing' the item just out of the window and back in seemed to fit the underlying file and folder metaphor better to my mind than just dropping it any old where in the window.
And 'any old where', at any old speed doesn't always bring up the oh-so-subtle blue border that says, "I get it, you wanna add something to this window, hit me." That's The Clue. There seems to be an invisible line you hafta cross, and some kind of deliberate pace you hafta hit. Too fast and SL doesn't seem to always take it seriously. But that left edge scrub can be quite fast.
Sorry about the over hasty denial, I was checking my facts and editting to say you were right when the board was shut for some sort of maintenance, and my bad became permanent. Please forgive.

How do I insert a blank page if my group ends on an odd-numbered page

I have a report that prints out information for 10 regions. We print this report double-sided and put it into a 3-ring binder with 10 divider tabs, one for each region. If the last page for a particular region is an even-numbered page, then everything is OK since the next region begins on an odd-numbered page (the right-hand side of the open 3-ring binder). However, if the last page is an odd-numbered page, this causes the next region to begin on what would be the left-hand side of the open 3-ring binder which is not acceptable. I have considered printing each of the 10 regions separately (a seemingly easy solution, but our pages are required to be numbered consecutively through the regions - and are also of the type Page &Page of &Total_Pages).
How do I create a BLANK PAGE at the end of a region if it ends on an odd-numbered page?
I am using reports version 6i with 9i as my backend database. It just occurred to me that occasionally in printed material, one sees "This page intentionally left blank", usually on the last page of a chapter to permit the following chapter to begin on the right-hand side. If anyone has created a solution to get this "..intentionally left blank" page to print, this seems to be a close fit to what I am trying to do.

I am also trying to do this same thing.
I have followed the text as it is stated in
http://otn.oracle.com/products/reports/htdocs/faq9i.htm#43
but it still does not work.
My invisible line prints on every other page, however
my repeating frame prints on every page with no page breaks.
Do you have any suggestions?
Thanks in advance,
Vicki

Problem with photoshop elements 9.

Hello
For some reason my organizer screen is stuck about halfway up my screen, and i have tried all the solutions i know to minimize/maximize, move around and so on but nothing seems to help. Its like there is an invisible line i cant get the organizer window under. I can simply not get the window back to fill out the screen.
I hope you have a solution

If you use Go to Folder from the Go menu and paste the following, you still don't see the status.dat?
~/Library/Application Support/Adobe/Elements Organizer/9.0/Organizer

Half Black and White half Color Video

Is there a way to take a full color video and make half of the video black and white and the other half full color? For instance imagine a line down the center of the video, on the left the video is black and white, on the right side it's full color. Taking that concept if an object or person moves from the left to the right side of the screen, thus crossing that invisible line they automatically switch from black and white to color.
Almost like a video mask overlay.. How would I accomplish this in FCP? I have FCPS not FCPX

Why would duplicating the video onto a track above mess up the sync?
What you need to do is edit your piece first, once EVERYTHING is where it should be, THEN do the effects...
unlink your audio (shift-L), select all of your video clips, shift-option click and drag up. Select one of your clips, apply the desaturate or channel mixer effect and the crop... Now, if you do not have any other filters already applied to your clips, select your clip and press command-c to copy. select the rest of the clips that will be destaurated/cropped and right click, select paste attributes. Select filters and Crop, and viola... Tell me where the loss of sync is?
Make sure to press shift-L again so that your audio & video is linked.

Adobe Acrobat 7 Pro - URL Links

When links in a document wrap due to column width, how does one prevent the link to only use the first line? Specifically, in the following the link is actually "http://www.myscacc.org/Newsletters/0806News.pdf"
But only the first line of this is active.
http://www.myscacc.org/
Newsletters/0806News.pdf

I have been successfully adding links using the link tool in the newsletter for several months. I have posted the main problem at http://www.adobeforums.com/webx/.59b5fdc2
I had this same problem many months back when I first updated to Acrobat Pro 8. Someone responded with the setting that needed to be changed so that the "invisible" lines were truly invisible.
An image of explaining the problem further: http://www.myscacc.org/images/line-but-noline.jpg

Why does Preview automatically resize the text box to cut off the last character of added text? How do I fix it?

Why does Preview automatically resize the text box to cut off the last character of added text? How do I fix it?
I use the Tools > Annotate > Add Text feature, and when I click away after adding text, it automatically changes the text box size such that the last letter -- or last word -- gets bumped off into an invisible line below it, forcing me to manually adjust every single text box. It is highly annoying when trying to complete PDF forms (e.g. job applications).
It appears to be a glitch, quite honestly, an error resulting from Apple's product design. Has it been fixed in the new operating system (for which they want $30)?
I would very much appreciate any help you can provide! Thank you for your time.

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Can I force Straddle for table cells in the EDD ?

This is a question for the techies:
In my structured EDD, I have created hazard statements according to the ANSI Z535.6 standard, using a table format - with the table heading showing the hazard category (notice, caution, warning, danger) and the rows showing the individual messages. In the individual messages I have an icon to the left and the message text next to it. Visually, it is better to separate the two cells with a thin line. But in the header there is no icon to the left and I would like to remove the thin line. Yes, I am a perfectionist, I know
Here is what it looks like now:
As far as I can tell, there is no way to tell Frame to suppress the column separator line in the heading without also removing it in the body rows. And if I do remove the line, there is still a thin white line visible, as the heading cells are filled with an image covering its entire area (but that image does not cross over the invisible line, at least not in the PDF). Another option would be to use straddle on the heading cells, but I need to be able to do everything from the structured EDD and paragraph plus table formats. Is there a way to do this ?
Thanks in advance
Jang

Hi Michael,
Oh, well. I had already figured out that this is not an option. I did remove the line between the rows, as it does not add any thing to the clarity of the message panels in my hazard statement table. But FM cannot handle two adjacent cells with graphic frames without adding a single hairline between them, even if I told the program that the border should be None. Something about the importance of frames for FM, I guess. I have only been able to remove the extra unwanted and uncalled-for hairline by straddling the cells (manually). Of course I will have to adapt the EDD to allow straddled cells in the header, but that is peanuts compared to the stuff I have been doing to make this design work in the first place.
As I will have to create a small script to perform a series of necessary steps before a book can be published, and my hazard statement tables all have the exact same small problem, I will probably include a script that goes through the whole book and applies a straddle to any cells in the heading row of any hazard table. Being a perfectionist, writing that script before handing my stuff over to my customer will make me happier than not doing it and saving some time by delivering a solution that does not make me perfectly happy.
When all the hard work for my current projects is done, I will try to publish an article on how to implement ANSI Z535 compliant hazard statements in structured FM documents. Might be useful for others, too. I will show you my solution at the tcworld fair, if you have some time for that.
Ciao
Jang

Invisible lines on

Similar Messages

Maybe you are looking for