Invoice ref and item text not printing in check ( F110)

Hi Experts,
When i tried to print check using tcode F110 by following the procedure , i came to know in structure REGUP , invoice reference ( regup-rebzg) and item text ( regup-sgtxt) are not updating in REGUP . I checked this in debugger mode.
Also reference number ( regup-xblnr ) is updated in structure ,but not displaying in output check format.
Actually we are using ( ECC 6.0 ) zform and z print program zRFFOUS_C which are copied from std one and made some changes.
Even I checked for standard FORM F110_PRENUM_CHCK and RFFOUS_C by changing
in FBZP configuration level (assiging std form and std program ).
In this also same issue as mentioned above in debugger mode.
kindly give me any suggestions .
My requirement is to print
1. invoice reference ( rebzg)( instead of document number)
2. reference number (xblnr )( same as your document )
3 . item text ( sgtxt )
4. amount ( wrbtr)
Thanks & regards,
Rahul

Hi all,
I too am facing the problem of missing document numbers and invoice text while using F-58 for printing cheques. I am using the standard program RFFOUS_C but have customized the scrip F110_PRENUM_CHCK. If anyone has a solution to this problem please suggest.
Thanks,
BP

Similar Messages

SAP SCRIPT Header text and Item text not printing in customized PO

Hello Experts,
                      I have copied the standard MEDRUCK to ZMEDRUCK and customized the form according to the requirement.
I want to print the header text and Item text in my form.
For Header text I have used :
/: INCLUDE &EKKO-EBELN& OBJECT EKKO ID F01
Problem 1: The text what I enter in header text is flowing only when I hit on print preview without saving the form. Once I save the SAP SCRIPT and click on print preview the field is appearing blank. I also tried to print the form, but the field is appearing blank even on the print out.
Problem 2: For item text the field is concatenation of EBELN & EBELP. Can anyone suggest me how to concatenate and fetch the text in item text.

Hi,
    Im getting an error in my subroutine pool for i_xtline which is to fetch ITEM TEXT., It says its not a in any internal table nor defined as data. How can I proceed further. I have pasted my code below. Please check and revert ASAP
PROGRAM ZMEDRUCK_SUBP1.
TABLES: EKPO, EKKO.
FORM fetch_table_data TABLES in_tab STRUCTURE itcsy
                             out_tab STRUCTURE itcsy.
data xname like THEAD-TDNAME.
data i_xtline like xtline.
clear i_xtline.
refresh i_xtline.
CONCATENATE EKPO-ebeln EKPO-ebelp INTO v_item_text.
MOVE v_item_text to ITEMTXT.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT                        = SY-MANDT
    id                            = F01
    language                      = EN
    name                          = ITEMTXT
    object                        = EKPO
ARCHIVE_HANDLE                = 0
LOCAL_CAT                     = ' '
IMPORTING
HEADER                        =
tables
    lines                         = i_xtline
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
WRONG_ACCESS_TO_ARCHIVE       = 7
OTHERS                        = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.

Invoice number and document number not printed in payment advice

Hello Gurus,
I am executing reprint check through transaction fch7, In that Invoice number and document number not printed in payment advice. I have created zscript for that and also assinged regup-belnr and regup-xblnr and used standard program RFFOUS_C.
other fields from regup table are displayed but above two mentioned fields are not displayed.
I even tried debugging standard RFFOUS_C prog, in that regup-belnr and regup-xblnr are coming but it is not printed on form.
With regards,
Vikram

Hi,
Debug you Zscript and check the invoice no and document no. Have assigned that script in FBZP..? check the which form is calling FCH7 in debugger mode..?
Rgds
Aeda.

PO Item Text Not Printing correctly

Hello,
Per the config settings, the PR Item Text is transferred to the PO Item text while creation of a PO.
When the PO is created, one can see the PO Item Text maintained in ME23N, but when you do the print
preview / print output, it is not displayed.
Few observations I would like to point out:-
1) Tables STXH and STXL are maintained correctly for PR.
2) Tables STXH and STXL are not maintained when the PO is created.
3) If you do the changes in PO Item text through ME22N for say Line Item 0010 and save, then print preview / print output shows only for Item 0010 since the entries are not present in STXH and STXL.
4) In T-code ME23N, when you go to PO Item Text tab for Line item 0010, then interestingly PO Print Preview shows only for 0010 even though there are no table entries. If you drill down for all line items, the print preview shows for all.
Can anyone please suggest why the print preview / print output does not show for all line items and why SAP is behaving this way?
Is there any other config settings to be done?
Regards,
Sanjiv

Hi Sanjeev,
Can you tell me what did u do for the item text to appear on the foem. Am having the same issue. Did u do any cnahes in teh form / driver program?....Pls let me know.
What was the customisation that was affecting it.
I am using the same
SAPFM06P ENTRY_NEU ZMEDRUCK(standard program).
Did u do any changes in the form? I want the item text to appear below the item no.
Please let me know.
Thanks
Micky

Z-Report for PR using ES language not getting the Header and Item text deta

Hi,
We have developed Z report for PR report and we ahve used ES and EN language, but when i select language ES and execute the report then we are not getting the Header and Item text data,
Secondly when We select language EN and execute the report then we are getting the Header and Item text details.
Please guide me.
Thanks
Shital

Have you maintained Tetexxt in ES language or is it that you are expecting on selecting ES the text from En will get coverted to ES and display in your report?

Order type, Invoice type and Item categories for Nota Fiscal Brazil

Hi eveyone,
we have a company in Brazil implemented in SAP using a different SD Order type, Invoice Type and Item categories
as our mother company in Switzerland. Reason of that is because of the nota fiscal customization for Brazilian legal requirements.
We startet with a Project worldwide to rollout a global template within sales and distribution and are facing now exactly
the problem with those different order type, item categories and Invoice type.
Our local SAP partner in Brazil told as based on best practise we should have different types.
I checked the customization and it seems I can't use e.g.: the same Order type for Brazil and Switzerland because
the activation flag for nota fiscal is linked to the order type and no sales organization can be setted to slplitt the different processes.
Someone knows if there are some possibilities (maybe trough user exits or badi's) to use globally the same dovument types, item categoreis... globally?
Thanks in advance
Gaspare Guttadauro

Hi Gaspare Guttadauro,
I would strongly recommend to use the different document types and item categories as suggested by SAP. Since Brazil do have one of the complex taxation process in place hence to determine correct pricing the different document type will be required. Also functionalities like CFOP determination and nota fiscal relevance can be maintained.
Please feel free to revert the forum in case of any doubts.
Cheers
Atul

Info record Po text not printing in Po

Hi all,
Info record po text not printing in po print out. Info record po text showing in po at item level but it was not printing in po. In info record No matl text checked. In material master no text maintained. please help on this
Thanks in advance for your help

Hi Mahesh,
Follow the path:
SPRO--> MM --> Purchasing --> Messages --> Texts for Messages ---> Define texts for Purchase Order
Double click on "Texts for Document Item" under Dialog Structure
Click on new entries and then Fill the following fields:
Pur. Doc. Category: Purchase Order
Print Operation: New
Doc. Type: NB
Item Category: Standard
Text Object: Purchasing Doc. Item texts (EKPO)
Text Id: Info Record PO Text (F02)
Print Sequence: 2
Print Priority: 1
and then Save
Hope this helps
Thanks,
Ankur

PO Header Texts and item texts

Dear Experts
                    PO header texts and item texts are stored in which table. please tell me the table name.
Here i have configured PO version management. in that i want to control some sensitive fields change only version management will get triggered. it is done through for this i have configured the sensitive fields in PO Print relevant changes. in that config the PO header texts and item texts table and field name is not exist.
Now i have change the PO through me22n in header texts version management is triggered for this. i want to control this if some body change the po header texts and item texts version management should not triggered.
is it possible.
Regards
Anand.

Hai,
Try this table STXH.
Get the required information(input) for the function module 'READ_TEXT'.
CALL FUNCTION 'READ_TEXT'
      EXPORTING
        ID                            = 'ST'
        LANGUAGE                      = sy-langu
        NAME                          = thead-tdname
        OBJECT                        = 'TEXT'
    ARCHIVE_HANDLE                = 0
    LOCAL_CAT                     = ' '
IMPORTING
    HEADER                        =
      TABLES
        LINES                         = lines
     EXCEPTIONS
       ID                            = 1
       LANGUAGE                      = 2
       NAME                          = 3
       NOT_FOUND                     = 4
       OBJECT                        = 5
       REFERENCE_CHECK               = 6
       WRONG_ACCESS_TO_ARCHIVE       = 7
       OTHERS                        = 8
    if sy-subrc eq 0.
      loop at lines.
        wa_HEADER_TEXTS-TEXT_FORM = lines-TDFORMAT.
        wa_HEADER_TEXTS-TEXT_LINE = lines-TDLINE.
        append wa_HEADER_TEXTS to lt_tmp_HEADER_TEXTS.
      endloop.
Better take the help of abaper.
With Regards,
Jaheer

Purchase requisition - Header Texts and Item Texts

Hi,
In Creating Purchase requisition if we enter the Header note text and Item text, in which table these texts will be stored.
Regards,
Ram

Hi,
To see any text go to the detail of that text you will have a magnify button below that text click there you will get the stand text editor open.
Click on GOT->Header it will give the information you need to get this text via function module 'READ_TEXT' they are sored in STXH.
Points if find this helpful
Regards,
Yakub Shah

Header and Item Texts for Sales Order

Hi,
Can any one help me on Header Text and Item Text...........
<b>STXH & STXL</b>
TDOBJECT :__________
TDID:_____________
TDNAME :_______________
Regards,
Raghunath.S

Hi
Double click on the related text
it will open Text editor
from Menu GOTO-> header
for SO HEADER Texts
then you see the 4 paramters like OBJECT (VBBK),ID,OBJECTNAME (sales Order No) and LANG
FOR SO ITEM texts
OBJECT (VBBP table), ID, OBJECTNAME(SO no plus ITEM No) and LANG
You have to pass these 4 parameters to READ_TEXT fun module to fetch the corresponding texts
see the doc on READ_TEXT
READ_TEXT
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
<b>Reward points for useful Answers</b>
Regards
Anji

Hp officejet pro 8100 and it does not print bar codes from UPS or USPS

have an hp officejet pro 8100 and it does not print bar codes from UPS or USPS. Can you please please help? i have used my ipad, by HP G62-355DX Notebook and neither will give me printed bar codes. The balance of the mailing label do print, just not the bar code. It may be my imagination, by I believe it used to print thebar codes.

Hi,
Try adding an alternate driver and try to print.
To use an alternate print driver for HP printers in Windows 7:
1. Click on the Start menu.
2. Click on Devices and Printers.
3. Click Add a Printer
4. Add a local Printer
5. Select Create a New Port
6. Select Standard TCP\IP port
7. Enter Printer IP address (Printer IP address can be found by printing network config page from printer
8. Under Manufacturer select HP and under printer select HP Officejet 8000 pirinter or Officejet 7410
9. Click apply and try printing
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

HP Officejet Pro 8500 A910 - all new ink cartridges, black and blue ink not printing?

HP Officejet Pro 8500 A910 - all new ink cartridges, black and cyan ink not printing?
Cleaned printer heads w/no luck.

Welcome to the forums @corAtrum1 ,
I read your post about your Officejet 8500 no longer printing in black and cyan ink. I would recommend that you try out the steps in the guide below for this problem.
I hope this helps!
Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Cyan and yellow are not printing on HP officejet pro 8500 all-in-one printer A909

I have an Officejet Pro All-in-One 8500 A909a printer, using OS X operating system. Cyan and yellow are not printing. I've ran the Print Quality Diagnostics Page and they do not show up there or on the align page. My ink levels are good.
Can you help me find and fix the problem?
Thanks

Hi DavidM2,
Welcome to the HP Forums.
I see that you are having issues with the Cyan and the Yellow ink cartridges as well.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
If you are still having issues then try to replace the cartridges.
Let me know how you make out and if you have any other questions, feel free to ask.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Acrobat X and XI will not print many pdf documents.

Acrobat X and XI will not print many pdf documents. When I click Print, the document fades and I get a dialog box that says "Adobe Acrobat has Stopped Working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I was experiencing this with Acrobat X so I upgraded to XI, but the problem is exactly the same. I am using Windows 7 Professional operating system.

Thank you for your reply. I have several printers available on our network,
the program doesn't even go as far as allowing me to select a printer. I am
trying to print to an HP 1320n or a LANIER MP C5502 PCL 6. I have changed
the default printer, but the result is still the same. In does the same
thing with Adobe (Standard XI) PDF set as the default printer.
Stan Reznicek
WinWholesale
3110 Kettering Blvd
Dayton, OH 45439
937-294-4249
[email protected]

Transaction to Mass Update Header and Item text in Purchase Order

Dear All
Whether any Transaction in SAP to mass update the Header and Item text in Purchase Order.
One Single Text For Ex :" This is a Dummy PO" .
This text needs to be updated in large number of POs.
Please let me know your views
Reg
Shyam

Hi Shyam,
You can make use of BAPI_PO_CHANGE for this. See the documentation of this BAPI in SE37 for more information.
"You can transfer header and item texts in the PoTextHeader and PoTextItem tables. You import texts
for services in the PoServicesText table. Texts can only be replaced complete."
Regards,
Purnima.

Invoice ref and item text not printing in check ( F110)

Similar Messages

Maybe you are looking for