Invoice split due to mismatch in Foreign trade data

Hi all,
While creating a Commercial invoice for Exports with ref to Around 20 Deliveries , the Invoice is getting Split into Two parts, First one consisting of details from 19 deliveries and second consisting of 1 delivery.
On analysing the Split Analysis , i found that foreign trade data of the two cases differ.
I checked up in the Master Data (Foreign trade data) as well as Copy control(delivery to billing) which i found to be correct.
Can anyone please let me know if there is any other reason that this foreign trade data is coming different for this delivery while processing for invoicing.
Anticipating your replies in this regard,
Ujjwal

Hi,
You can check with as Lakshmipathi suggested, also please check with the Commodity Code, country of origin for the delivery which is getting split, check with the log for foreign trade data at Header and Item level in the delivery.
One possible reason can be different master data.
Regards,
Harsh

Similar Messages

  • Invoice split due to 'Number of foreign trade data in MM and SD documents'

    Hello experts,
    We need to avoid invoice split that happens becuase of the different foreign trade numbers on delivery headers. After going through few of the other related threads, I found one solution to this issue where in
    We go to VTFL and under DEL TO BILL AND HEADER DATA -->DETERMINE EXPORT DATA maintain B
    Using above we can avoid invoice splitting. But this still does not resolve my issue as for us some plants need setting of A for the above. So we were wondering how we can control this setting based on the plants.
    Lakshmipathi, Yadav, Raja Singh,... Please share your thoughts.
    Please avoid using personal names
    Edited by: Lakshmipathi on Sep 18, 2009 7:38 PM

    Hi,
    For your particular process you have to by Pass the invoice splitting which is based on foreign trade data. But as per standard it wont be recommended. But if you are very much assured this is what you want you can create splitting rule which will bypass checking the Foreign trade data. For this , go to VOFM and select data transfer, billing documents, and copy routine 001which is for invoice splitting, modify this routine and make another one with your requirement and assign it to VTFL data transfer.
    Hope it will help.
    Thanks,
    Raja

  • Billing split due to Number of foreign trade data

    Hi,
    When i am doing the Billing for an OBD which has one line item( split in two batch line items ), its creating two inter company billing documents. Split analysis shows, Split due to different header data, Number of foreign trade data number differs. In OBD, i found only one Number of foreign trade data number. Creation of two billing documents is creating a problem as I am not able to get the proper print(Description of Material is missing) in Inter company billing.
    Appreciate if anyone could have a look and let me know the reason for split as it should have only one inter company billing doc.
    Regards,
    Irfan

    Hi Irfan
    Please activate the Incompletion procedure for header and item as shown below :
    1. IMG> Sales and distribution>Foreign Trade/Customs-->Incompleteness Schemas for Foreign Trade Data.
    Create 2 Incompletion procedure Z1-Incompletion procedure- header and Z2-Incompletion procedure - Item
    2. Z1-Incompletion procedure- header : Assign the following fields
    EXPVZ Mode of Transport for Foreign Trade
    STABE Country of Origin of the Means of Transport at Departure
    STGBE Origin of Means of Transport when Crossing the Border
    ZOLLA Customs Office: Office of Exit/Entry for Foreign Trade
    3.Z2-Incompletion procedure - Item
    Origin field EXPRF
    1 Field ready for input - Incompletion check not active
    4. Then go to Foreign Trade Data in MM and SD Documents and assign the above incompletion procedure
    DE 004 Germany 2 Z1 Z2 activate tick mark
    ES 011 Spain 2 Z1 Z2activate tick mark
    FR 001 France 2 Z1 Z2activate tick mark
    This will solve your issue .
    Thanks and regards
    Veera

  • Foreign trade data is missing

    Hi Guys,
    When i am creating invoice document by using VF01, after saving the document it generated the Invoice no and gives the error- Foreign trade data is missing .
    Its not allowing me to create accounting document.
    Please help me to solve this issue.
    Thanks and regards,
    Kumar

    Dear Kumar,
    Goto T. Code: VF02,
    Key-in your billing document and enter.
    Select the item(s) and From top-Menu,
    "Goto --> Item --> Foreign Trade Item".
    Here select "For Trade/Customs" and below that once again select "Origin / Destination / Business".
    In this screen, you have to give Country of Origin and Dispatch Country and save the document. I am sure, now Accounting Document will generate.
    Best Regards,
    Amit

  • Foreign trade data missing

    Hi Friends
    I am having a typical issue in  accounting doc header the foreign trade (FTD)is missing.
    In typicl upgrade scenario 4.6c FDT is available in Vf02 Header Level.I have checked material master data which is not the source of Foreign Trade data.
    I have compared nodes of FDT in both 4.6C & 6.0ECC. they are same.No transport is mising.
    Even VI29 & VI39 are also correct.
    Do you have any idea of any change with FDT in Upgrade Scenario ?
    Please help
    Saurabh

    Hello,
    please check the tables EIKP and EIPO.
    You can find the  EXNUM in table VBRK. For the EXNUM you should have an entry in EIKP and EIPO.
    If these entries are missing the billing document is incomplete.
    To correct the document, please try to go in VF02 and enter this invoice and then go to Header      
    Foreign trade data and simply come out of the screen by pressing green     
    arrow (no changes to be made) and then save the Invoice. 
    Then it should be possible to trasfer the document to FI.    
    Hope this information help.    
    regards
    Claudia

  • Invoice Split due to Tax Departure country and Number of Foreign Trade Data

    Hello Friends,
    With all the search I have done, this question was asked and answered a lot previously, but at the same time most of the previous solutions confuse me or didn't help me to solve the issue.
    My issue is there is a invoice split for a sales order, yes its Order based Billing.
    We had order combinations with two different plants before in the past and had no issues, but this plant is in abroad foreign country.
    So I checked VTFA. ( order - billing copy control )  
    Header:                                                                                                          Item:
    Copy requirment          001   Header/order-related                                 Copying Requiremnets    002   Item / Order related
    Determ.esport data      B                                                                         Data VBRK/VBRP              (Blank)
    Assignment Number     E
    Reference Number       A
    The Billing split analysis shows as:
    Split due to different header Data:
    Fld Name                                          $000000001                                $000000002
    Export indicator                                                                                   Z
    Tax classification 1 for custo              1                                                0
    Number of foreign trade data                                                              0000000667
    Tax Departure Country                       US                                             NL
    Please do offer advice and solutions. Thank you.

    Hi
    First, use SAP Note 11162 - Invoice split criteria in billing document as a checklist. Check it carefully.
    After, subroutine VOFM in Data VBRP/VBRK. Check routine 007 as a template. The idea is populate the field ZURKI (CHAR 40) with a concatenation of strings. Each value is a different invoice. So, if the concatenation is over 40 characters, the do an offsetting of some values. As SAQ MD says, take the help of an ABAPer.
    I hope this helps you
    Regards
    Eduardo

  • Invoice Split due to Foreign trade number

    Hi,
    I am getting Invoice split due to foreign trade number.I do not want to have the invoice split because of this .Please suugest
                    ZF2                                           ZLF
    Copying Req    003
    Determine Export Data  A
    Allocation Number   E
    Reference Number   C
    Regards
    Rahul

    hi,
    you need to create a new copy control routine and ZUKRI( Combination criteria in the billing document) needs to be modified so that splitting do not happen because of foreign trade document number
    Thanks & regards

  • Invoice splits due to Foriegn Data

    Dear consultants
    Iam facing the Invoice split due to Foriegn trade data.
    Kindly let me Know where to Remove the Foriegn Trade data in the Configuration screen so that i will not get the Split
    Regards
    Prakash

    Dear Prakash,
    You can set it in Copy Control between Delivery Document & BIlling Document.
    Use T-Code VTFL, select source Deliver & Target Billing Type & Display Header Details.
    Here there is a field for Determine Export Data. You can make necessary setting here.
    There is also settings for "Foreign Trade Data in MM and SD Documents", which u can check at IMG - Sales and Distribution - Foreign Trade/Customs - Control Foreign Trade Data in MM and SD Documents...
    Hope this helps...
    Thanks,
    Jignesh mehta

  • Foreign Trade data in Invoice

    Hello SAP Experts,
    We are having many Invoices failing to create Accounting documents due to "Missing Foreign Trade data".
    This issue have arised as they have Materials which are service materials and these service materials are not meant to have Export data.
    Do we have any setting where we can make the "Foreign trade data " as exempt for these service materials and/or the Invoice do not have the Incompletion log  for missing FT data.
    Attached is the Invoice screeshots showing incomplete FT data and Posting status "Posting document not created (export data missing)"
    Thanks in advance for your answers.
    Umesh Karane

    Hello Lakshmipathi,
    I have checked the Incompletion log maintained and it's not maintained for Foreign Trade data.
    I have also checked the Possibility of making the SERVICE Item's data as BLANK in material master: General /plant data , : Foreign Trade data, but even then the Billing document shows: FT incomplete.
    Can we maintain Exemption for Foreign trade data for "SERVICE" materials in the Configuration of Foreign trade in IMG?
    Thanks in advance for your answers.
    Thanks and Regards,
    Umesh.

  • Foreign trade data defaulting to manually processed invoices.

    Hello Experts,
    How to default foreign trade data to manually processing invoices?
    Presently it is being manuallay processed and we need to default this data automatially on Invoice.
    Regards,
    Preeti

    We have maintained all the necessary setups for the foreign trade data.
    however, while creating the billing document for export, it is not auto - defaulting the foreign trade data. can this be autopopulated?
    The source and destination mode of transport.

  • How to avoid invoice split due to different billing due dates?

    Dear All,
    How to avoid invoice split due to different billing due dates for the group of  outbound deliveries?
    Thanks in advance.
    Regards,
    Niketan

    Hi,
    Thanks for the inputs.
    I want to avoid the invoice split during invoice creation through transaction VF04 for  no. of delivery documents having different billing due dates.
    I can club only 14 delivery documents via VF01 which will have the common billing date. Is there any other method of clubbing 25-30 delivery documents with different billing due dates in one invoice?
    Regards,
    Niketan

  • How to avoid invoice split due to different billing dates?

    Hi All,
    How to avoid invoice split due to different billing dates during executing VF04 transction?
    I want to club 30 delivery documents with different billing due dates in one invoice.
    I am using VF04 tr for the same. However, here i cannot control the invoice split based on diff billing due dates.
    If the same thing is tried via VF01 , it allows only 14 del dcouments at a time.
    Can u suggest  abetter technique to do the same?
    Regards,
    Niketan

    I think I already explained you in a similar post to use VF04 setting the billing date as default:
    menu: settings->default data. Place  the date in field Billing Date.
    pls. reward if helpfull
    Roberto

  • Invoice split due to Batch split

    Hi All,
    I am facing an issue, whenever i create a delivery with batch split and invoice the same delivery, system splits the invoices into 2 invoices, one with zero value for the particular item, and other invoice with different line items with same material and different quantities as per batches.
    Client doesn't wants to process as described above, and wants to create single invoice for the same. please help.
    Thanks in advance
    Amit

    Amit,
    You will ahve to use routine for this...check copy controls VTFL...See in that std routine used is 001...with  ABAP you will ahve to copy that AND create new routine with new logic which will avoid invoice split due to batch...Try to test applicability first..
    REWARD IF U FINDS THIS AS USEFUL....
    Regds
    MM

  • Deactivate the Foreign Trade data in SD

    Dear Friends,
    How can I inactivate the Foreign Trade data...Incompletion schema....I dont want to maintain this for my exports sales order.....
    So the system is not generating Accounting document without filling the Foreign data?
    Thanks
    Ivy

    Hi Ivy,
    In case Invoice Split is happening as your header detail for he Foreign trade data is differen on the billing document .
    If the header fields in the billing documents created are not identical which causes an invoice split
    VBRK-KNUMV
    VBRK-NETWR
    VBRK-MWSBK
    VBRK-VBELN
    VBRK-RFBSK
    VBRK-ERNAM
    VBRK-AEDAT
    VBRK-ERDAT
    VBRK-ERZET.
    The above mention field fields should not cause a split but ither than that can cause a split .
    To avoid a split due to different header fields - except for the fields listed above - you have the option of using customer-specific data transport routines in the copying control of the relevant document types which initialize the corresponding fields. However, the information contained in these fields is then lost in the billing document
    Check note 11162 for more detail.
    Hope this helps.
    Kind Regards,
    Sameer

  • Exit for Foreign trade data(import tab) on ME22N

    In Purchase Order transaction ME22, the requirement is to copy the contents of office of entry field (EIKP-ZOLLA) to EKKO-INCO2 field.(whenever there is any change in office of entry field).The office of entry field is present in import tab of purchase order screen. Whenever any changes happen in it, the standard PO customer exits like ‘EXIT_SAPMM06E_007’  , EXIT_SAPMM06E_006 does not get triggered  Nor the BADI ‘ME_PROCESS_PO_CUST’. However,  foreign trade exit EXIT_SAPLV50E_005 gets triggered. In this exit only completeness of data is checked and EKKO values cannot be modified from this exit.
    Is there any alternative exit or BADI which gets triggered on the making changes in any data in the import (foreign trade data) tab in PO? Is there any mechanism to change EKKO-INC02 (screen value) from any of the other exits (i.e. exits triggered on data entry in foreign trade tab)?

    Transaction Code - ME22N                    Change Purchase Order
    Exit Name           Description
    LMEDR001            Enhancements to print program
    LMELA002            Adopt batch no. from shipping notification when posting a GR
    LMELA010            Inbound shipping notification: Transfer item data from IDOC
    LMEQR001            User exit for source determination
    LMEXF001            Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001            Customer-Specific Source Determination in Retail
    M06B0001            Role determination for purchase requisition release
    M06B0002            Changes to comm. structure for purchase requisition release
    M06B0003            Number range and document number
    M06B0004            Number range and document number
    M06B0005            Changes to comm. structure for overall release of requisn.
    M06E0004            Changes to communication structure for release purch. doc.
    M06E0005            Role determination for release of purchasing documents
    ME590001            Grouping of requsitions for PO split in ME59
    MEETA001            Define schedule line type (backlog, immed. req., preview)
    MEFLD004            Determine earliest delivery date f. check w. GR (only PO)
    MELAB001            Gen. forecast delivery schedules: Transfer schedule implem.
    MEQUERY1            Enhancement to Document Overview ME21N/ME51N
    MEVME001            WE default quantity calc. and over/ underdelivery tolerance
    MM06E001            User exits for EDI inbound and outbound purchasing documents
    MM06E003            Number range and document number
    MM06E004            Control import data screens in purchase order
    MM06E005            Customer fields in purchasing document
    MM06E007            Change document for requisitions upon conversion into PO
    MM06E008            Monitoring of contr. target value in case of release orders
    MM06E009            Relevant texts for "Texts exist" indicator
    MM06E010            Field selection for vendor address
    MMAL0001            ALE source list distribution: Outbound processing
    MMAL0002            ALE source list distribution: Inbound processing
    MMAL0003            ALE purcasing info record distribution: Outbound processing
    MMAL0004            ALE purchasing info record distribution: Inbound pro
    MMDA0001            Default delivery addresses
    MMFAB001            User exit for generation of release order
    MRFLB001            Control Items for Contract Release Order
    AMPL0001            User subscreen for additional data on AMPL
    No of Exits:         35
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    BAPI
    http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
    http://support.sas.com/rnd/papers/sugi30/SAP.ppt
    http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
    http://members.aol.com/_ht_a/skarkada/sap/
    http://www.ct-software.com/reportpool_frame.htm
    http://www.saphelp.com/SAP_Technical.htm
    http://www.kabai.com/abaps/q.htm
    http://www.guidancetech.com/people/holland/sap/abap/
    http://www.planetsap.com/download_abap_programs.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
    /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
    /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
    http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
    http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
    http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
    http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
    http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
    http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
    http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
    Rewards if useful.........
    Minal

Maybe you are looking for

  • After upgrading to iTunes 10.2 I get a constant error code

    Hello, Everything was just working perfectly fine, until I upgraded my Windows 7 x64 computer to the "new iTunes version 10.2" with Apple Software Update. The installation went fine, however, now everytime I launch iTunes I get the following message:

  • Memory leak issue on Blackberry Torch 9860

    I own a Blackberry Torch 9860 Os 7.0 Bundle 1465 for the last 5 months Previously I had Blackberry Curve 9300 which I had upgraded to OS 6.0. It had memory leak issues wherein my application memory would gradually dropdown to merely KBs within a few

  • How do programatically set focus on a record other than the first one in a block?

    My form performs the query for the block, and by default it leaves the focus on the first (top) record in the block.  I'd like to have it focus on the last record in the block upon initial query. i've tried Last_record and go_record in a post-block t

  • Can I change the size of a jpg in another jpg?

    I have PSE 9 on XP with SP3. My wife has a business card as a jpg. On the right side of the card is a picture of a painting of a dog she did. She wanted to change that picture. So I used the Rectangular Marquee Tool to select the existing image and t

  • Slow in sending mesage of my 3250

    when im sending messages my phone take about 1 minutes or more i fixed it by formatting my phone almost every 2 weeks.. is there any other way that i can fix it?? pls help im new here. tnx in advance..