IO LA, no video playback

The IO LA is hooked up to my powerbook's FW400 port. I have a Lacie FW800 cardbus card installed on the pcmcia slot. A G-raid is hooked up to the Lacie card via fw800 cable.
Powerbook is a new 1.67ghz with 2 gb of ram.
The problem:
I can get audio playing back through the IO LA's audio outs. But can't get video playback throught the IO's Component out.
I have set the external video to ALL FRAMES, and set the video out put to IO Pro 8 bit component.
Nothing on my external program monitor unless I tell it to "Show current", then it will show the current frame under the playhead. As soon I hit play nothing.
Any ideas?
Thanks
Matt Gottshalk

The IO LA is hooked up to my powerbook's FW400 port. I have a Lacie FW800 cardbus card installed on the pcmcia slot. A G-raid is hooked up to the Lacie card via fw800 cable.
Powerbook is a new 1.67ghz with 2 gb of ram.
The problem:
I can get audio playing back through the IO LA's audio outs. But can't get video playback throught the IO's Component out.
I have set the external video to ALL FRAMES, and set the video out put to IO Pro 8 bit component.
Nothing on my external program monitor unless I tell it to "Show current", then it will show the current frame under the playhead. As soon I hit play nothing.
Any ideas?
Thanks
Matt Gottshalk

Similar Messages

  • Can't hear recorded sound during video playback

    I take a lot of videos of my kids.  I have noticed lately that the volume is low or muffled...you can't hear what is being said even if they are screaming 6 inches away.  I thought maybe something had gotten into the microphone, etc.  I recorded a voice memo and on playback i could hear what was recorded just fine at a normal level. Now once I tried to record a video of my kids talking, it played back so low that i can't hear anything and that is with the volume turned wide open.  Not really sure what this issue could be but if the volume works fine on voice memo wouldn't it work the same on video playback? 

    Hi there AmPriSi,
    It sounds like you may be experiencing a microphone issue with your iPhone. Use the following article to help you address this issue:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • ITunes / Windows Video Playback.. (what, you actualy want to WATCH vid's?)

    I'm sure there are several people out there that are having the same or similar problems, but because I can't seem to find them with the exact problem I'm having, I thought a new thread would be appropriate....
    Upgraded from 6 to 7 yesterday... music seems to play OK (not as good as 6, but not all the issues other people are having). Now video playback in iTunes is little more than a slideshow with audio to (almost) match.
    When I go to play back any vid podcast, or other video in my library for that matter, iTunes bumps my processor up to 100% and holds it there, and the video does little more than skip and bounce through the entire playback (even if the overlay controls go away fully, the slightest mouse movement brings them back). The audio quality seems to almost follow the video, but they get away from each other (the audio was about 2 seconds ahead of the video/slide show while watching the current version of Photoshop TV). Any other video player works fine, but if I wanted to use them, I would have never installed iTunes in the first place, the idea being that the integration was the blessing.
    I USED to be able to watch a video, use Photoshop CS2, have Flash 8 open behind it, After Effects running on a seperate monitor, browse the web, and play freecell all at the same time, with several background utility style apps going all at the same time with out a hickup.
    After trying the IDE fix's, the sound setup fix's and any other fix's found in the discussions (and yes, reverting them after they failed to fix the problem), I'm still having an issue, and now I can't find iTunes 6 to try to get back to a good time in life... oh why oh why apple, why do you have just as many issues as windows? I had hoped for so much more....
    Anyone? Any Ideas? Anyone willing to email me itunes 6 so I can get back to a better time in life? Or provide answers? I've got a horriable track record with apple (over 20 business stopping questions, and to date 0 responses) so I am about 2 minutes from giving up
    Sorry apple, but this is way past frustrating... were all your win/tel beta testers using mac's?
    HomeBuilt Windows XP Pro ATI 9700 Pro / AMD Athlon 64 3800+ / hampster on treadmill running his head off...

    Are sure that's not Flash needed for those videos?

  • How can i monitor network traffic to debug video playback issues from a NAS?

    I am having problems playing videos on my new Mini that i am using as an HTPC. 
    I have a brand new Mac Mini running Lion with a 2.7 i7 processor and 8GB of RAM with a wired connection to a switch. .
    My switch is a NETGEAR ProSafe GS108T-200NAS set to default settings. I haven't had a chance to start messing with VLAN settings or anything else. There is a bit of a learning curve on my part on this end.
    My NAS is a ReadyNAS Pro (RNDP6000) with 3 x 1 TB hitachi ultrastar (HUA722010CLA330) drives and a 1.5 TB seagate (ST31500341AS) drive setup in RAID config using X-RAID2.
    The problem I am having is video playback when accessing large video files off of the NAS.  These are typically 1080 HD mkv files. 
    I have tested movies as small as 7.5GB with only slight stutters on occasion.  I tried a 10.5GB movie and the stalling was much more pronounced. Movies larger than 11GB are completely unwatchable stalling every minute or so. 
    I have also tried large movies on the local drive and that is not a problem at all - they play back just fine.  Beautiful playback in hidef.  Mind you, some of these are the same files that were stalling over the network.
    I have also noticed that some other network devices get kicked off the network when a movie is playing.
    I think it has something to do with the transfer speed of files over the network and the switch - i am no expert at this mind you.
    I am wondering if there is some sort of utility that i can use to monitor network activity on the mini so that i can fix my problem.  Or has anyone made chages in their switch settings to optimize data trasfer speeds.
    Any advice or recommendations on. 
    Thank you all!

    OK, I did a couple of things and ran things a couple of times. 
    First what I did settings wise:
    I enabled jumbo frames on the Mac Mini, ReadyNAS Pro, and the Netgear GS108T switch.  All with MTU set to 9000.
    I went ahead and enabled jumbo frames on the rest of the computers on the network just in case.
    After these changes I ran into the same problems with videos timing out - very annoying and frustrating as you can imagine.
    Then I started playing with device configurations.  My original configuration was NAS > Netgear switch > Mac Mini. I went ahead and switched the switch to an Airport Extreme I have as my WAP and the setup looked like this - NAS > Airport Extreme > Mac Mini. 
    Well, long story short, no go.  It appears to me that the NAS is the one having issues providing the necessary data at the proper speed.  I also tried playing sopme movies off of the NAS onto a desktop i have and had the same issues - choppy frames and crashing movies.  I even tried connecting wirelessly to see if that would work. 
    BTW, I have the Mac accessing the file system using CIFS. 
    I don't know what else I could do.
    I am going to have to go to the Netgear forums to see if i can figure this out.  Hopefully, I can get things going to be able to help some people out.
    If anyone has any ideas, they would be greatly appreciated.
    My only other alternative is spending $2000 for the thunderbolt capable NAS that Apple sells - it's only money!
    Cesar

  • Apple TV 2 choppy video playback when mirroring from Macbook Pro (Yosemite) and Macbook Air (Yosemite) but not iOS devices

    Video playback is choppy (cuts out every 30-45 seconds) when air playing from both my MacBook Air 1.3 GHz Intel Core i5 running Yosemite and my husbands new MacBook Pro, but runs perfectly when mirroring from any of our iOS devices (iPhone 6+, iPad mini 3, etc.) We have Apple TV 2. This problem just started a few weeks ago, was working fine around Christmas. The problem seems to have coincidentally started right after our son tried plugging in and setting up his Chromecast on our tv. I disconnected the Chromecast, but we still have the problem. All of our software if up to date and I've tried disconnecting blue tooth, we do not have a microwave and our wifi network has a very strong signal. We have an Airport Extreme base station. Is there a solution to our problem?

    Hi leahmturner,
    I see that you are experiencing an issue with choppiness while AirPlay Mirroring from your computers to your Apple TV. I have an article that contains some helpful troubleshooting steps for you regarding this issue:
    About AirPlay Mirroring in OS X - Apple Support
    http://support.apple.com/en-us/HT201343
    Optimizing image quality
    Resolution matching modes
    You can choose between two desktop resolution matching modes that let you select which display will have the best image. When AirPlay Mirroring is turned on, select an option under "Match Desktop Size To:" in the AirPlay Mirroring menu extra.
    Match Desktop Size To: Apple TV
    AirPlay Mirroring changes the desktop resolution to best match your Apple TV, resulting in a 16:9 image that fills the HDTV screen. This setting often produces the sharpest image on the HDTV. The aspect ratio and/or resolution of the built-in Mac display may change to accommodate the Apple TV.
    Match Desktop Size To: This Mac
    AirPlay Mirroring scales the contents of the desktop to fit on the Apple TV, leaving the resolution of your Mac's display unchanged. Use this setting for the sharpest image on your Mac's display. Depending on your Mac model, the resulting image may not fill the HDTV screen.
    Troubleshooting AirPlay Mirroring
    If you don't see mirroring options
    If your Mac and Apple TV are on the same network, but no AirPlay Mirroring menu appears, your Apple TV may be asleep. Simply press a button on your Apple TV remote to wake it up. After a few seconds, the AirPlay Mirroring menu extra appears. If you still don't see the options you expect, make sure your Apple TV has the current software update installed. Also make sure that you have the "Show mirroring options in the menu bar when available" option selected in the Displays pane of System Preferences.
    If the menu bar or Dock is cropped
    Some HDTVs have bezels that cover a small percentage of the screen. This can result in a slight cropping of a full-resolution HDTV image. Depending on the HDTV model, AirPlay Mirroring may automatically adjust the picture size to prevent cropping.  If you are using OS X Mountain Lion or later, and you see cropping of the menu bar or Dock when using AirPlay Mirroring, toggle the Overscan correction option in Displays preferences.
    Minimize video post-processing
    HDTVs often apply picture quality enhancements intended to improve the look of film and video sources. In some cases, these enhancements can lead to over-sharpening artifacts when displaying your Mac desktop. Some HDTV models have built-in settings to change or disable the enhancements for use with a computer (computer, presentation, or game modes). Otherwise, the controls for sharpness, detail enhancement and noise reduction can be used to optimize the appearance of the Mac desktop. Consult your HDTV’s manual for guidance on the appropriate settings for use with a computer.
    Firewall security settings
    If you use a firewall, make sure the following firewall security options have been set to allow AirPlay Mirroring to work:
    Choose System Preferences from the Apple menu ().
    Click Security & Privacy, then click Firewall.
    Click the lock icon to unlock it if it's locked, then type an administrator name and password.
    Click Firewall Options.
    Deselect (uncheck) the “Block all incoming connections” checkbox.
    Select (check) the “Automatically allow signed software to receive incoming connections” checkbox.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Video playback from Final Cut Pro studders over HDMI

    I have a problem playing back video from FCP. The video output will studder during horizontal pans when I output via HDMI. The audio output is not affected.
    I have been playing video successfully using FireWire for output in FCP, however, my new video switcher system will not support FireWire output.
    What are some possible causes of this problem?
    System stats:
    * Mac Mini (2010 model)
    * 8GB RAM
    * OS X 10.6.4 (Snow Leopard)
    * Final Cut Pro 7.0.3 (Final Cut Studio 3)

    @ Studio X : The files were originally created with Final Cut Pro, rendered out to QuickTime, then are being played back with Final Cut Pro. The file that has the most noticable studdering is a 60-minute timeline sequence in Final Cut. All files are being stored and played back from the Mac Mini's internal hard drive. Everything was originally shot on DV and formatted for a 4:3 aspect ratio.
    @ Shane Ross : Are there any settings in the MacOS or FCP where I can improve the HDMI video signal? Or do you know of / have any experience with Firewire to HDMI converters? Unfortunately, my new signal path relies on HDMI from the video playback.
    My current setup uses the Firewire output, which is then converted to composite video & analog audio using a pair of ageing DV tape decks. That setup is becoming troublesome due to age.

  • I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

    Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

    I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
    iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
    However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
    To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
    However, I would also like to rent movie's from iTunes, 
    Would be great if iTunes would let you choose the output device, too, like most other applications using sound  from Skype to Windows Media Player,...

  • How do I stop my itunes video playback from skipping

    We just bought a full season of a show and while trying to watch it the video playback is either really slow or it stops and skips while the audio keeps playing. Any suggestions how to fix?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Multiple video playback issues

    Hi All,
    I would dearly appreciaty any light anyone could shed on this issue - I have run into a couple of Flash bugs that have stumped me for quite a while, and my deadline is aproaching fast.
    Essentially, I would like to play back 3 reasonably high res videos (On2 VP6-S) simultaneously in one Flash App (using flash.video, netstream and netconnect - code only). Unfortunately, when I do this, the video playback drops a lot of frames, however, CPU usage does not go much above 50% - spread over both cores. I'm using a Core2Duo. If I play the same 3 videos simultaneously in 3 separate flash apps (FP10), they play much better (and use close to 100% CPU). I even tried creating it as an AIR app with 3 separate windows (NativeWindow), but that made little difference. I have lodged this as a bug via the Flash Bug Reporting System (http://bugs.adobe.com/jira/browse/FP-2341).
    And yes, I do need to be doing something as crazy as this - it is for a pretty cool kiosk app, so I know what hardware will be used (and it has a good Graphics Card).
    One promising workaround appeared to be playing back a single NetStream in multiple Video instances, as it is NetStream that does the decoding, so I could decode once and present it in 3 places. Two of my video objects are actually the same flv (on different monitors), so there would be a 33% saving right there. If necessary, I could encode both flvs into a single 1920x1200 flv (I've checked - it would play back ok) and then use video.mask to show the relevant bits.
    However, another bug has been reported at http://bugs.adobe.com/jira/browse/FP-920 saying this does not work - Video in the object that last called attachNetStream(ns) will play, all others will freeze. They do mention a workaround that gets both videos to play - reset the size of freezed videos on ENTER_FRAME event. However, I cannot get this workaround to work - my first video is empty (not even frozen).
    So there are a couple of things I would love any feedback on. Firstly, if anyone has insights on how I could get this to work. Secondly, if anyone could try the "multiple videos on one netStream with workaround" code below (simply copy, paste and point to a relevant flv) and let me know if it works and the versions of software they used, I'd be very thankful.
    ---------------Code Begins-------------
    import flash.events.Event;
    import flash.media.Video;
    import flash.net.NetConnection;
    import flash.net.NetStream;
    showRedrawRegions(true); // both the placeholders and the entire window redraws every frame.
    // When only video1 is attached, only video1's region is redrawing
    // When both videos are attached, both video's regions are redrawing, BUT video1 is empty.
    trace ("Capabilities.version = " + Capabilities.version); // = WIN 10,0,22,91 // in Flash CS4 10.0.2
    //var nc:NetConnection = new NetConnection( null ); // Got Eror: 1137: Incorrect number of arguments. Expected no more than 0.
    var nc:NetConnection = new NetConnection();
    nc.connect(null);
    // Connect nc here ...? Unnecessary in this case?
    var ns:NetStream = new NetStream(nc);
    ns.client = new Object(); // Simplest way to deal with cuePoints and metaData by doing nothing. For more, see http://blogs.adobe.com/pdehaan/2006/07/playing_back_flvs_with_actions_1.html
    var stream:String = "test.flv";
    var video1:Video = new Video(); // Defaults to size of 320x240
    var video2:Video = new Video(); // Defaults to size of 320x240
    video2.x = 320;
    addChild(video1);
    addChild(video2);
    ns.play(stream);
    video1.attachNetStream(ns);
    video2.attachNetStream(ns);
    // PROBLEM: Video in the object that last called attachNetStream(ns) will play, all others will freeze.
    // See WORKAROUND below for solution:
    //WORKAROUND to stop the first split stream from freezing:
    addEventListener(Event.ENTER_FRAME, onEnterFrame);
    function onEnterFrame(e:Event){
    video1.width = 320;
    video1.height = 240;
    trace ("video1.videoWidth = " + video1.videoWidth);
    trace ("video2.videoWidth = " + video2.videoWidth);
    // When only video1 is attached, video1.videoWidth = 1920, video2.videoWidth = 0
    // When both videos are attached, video1.videoWidth = 0, video2.videoWidth = 1920
    ---------------Code Ends-------------
    Letting me know what exact versions of the following software was used would help a lot:
    - Windows/OS (e.g. XP SP3).
    - App code was written in. (e.g. Flash CS4 IDE 10.0.2, Flash Develop 3.0.1).
    - App code was compiled in. (e.g. Flash CS4 IDE 10.0.2, Flex SDK 3.4.0.6955).
    - Type and Version of Flash Player used (e.g. Standalone Debug Flash Player v10,0,22,91).
    The versions I used are listed above.
    Lastly, for what it is work, I found three interesting/informative results, but they didn't help me:
    - When only video1 is attached, video1.videoWidth = 1920, video2.videoWidth = 0
      When both videos are attached, video1.videoWidth = 0, video2.videoWidth = 1920
    - When only video1 is attached, only video1's region is redrawing
      When both videos are attached, both video's regions are redrawing, BUT video1 is empty.
    - var nc:NetConnection = new NetConnection( null ); // Got Eror: 1137: Incorrect number of arguments. Expected no more than 0.
      So I had to change it to:
        var nc:NetConnection = new NetConnection();
        nc.connect(null);
      Does this mean my NetConnection class is different and maybe incompatible with this workaround?
    Many, many thanks,

    How to view/hear pretty much everything:
    Assuming you already run OS 10.4.9 or above and have Quicktime 7.2, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
    RealPlayer from http://uk.real.com/player/
    Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
    Perian from http://perian.org/
    Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
    In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
    In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
    The world should now be your oyster!
    You should also have the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

  • What is the best Compressor setting for best quality video playback on an iBook g4?

    I know the iBook and G4's in general are very outdated today, but I need to ask anyways. I have some video projects in 720p and 1080p in which I have down converted to 480p and also exported to MPEG-2 for DVD (personal wedding videos and videos made for my clients using Final Cut Studio). Anything encoded at most resolutions using h264 won't play on my iBook. Even 480p.
    I have about 20 hours of mixed video content that I need it in a format that is suitable for an iPhone 4 and an iBook 12" with a 1.2GHz G4, 1.25GB RAM and I added a 250 WD 5400 IDE hard disk (running 10.5.8 and 10.4.11 for Classic Mode). I know the iBook doesn't seem like the best tool for modern video playback, but I need to figure out which setting will play best with iPhone 4 and iBook so I don't need to make 2 local copies of each video for each device.
    The iBook plays best with the original DVD output MPEG-2 file and playing back in QT Pro or VLC... but I already have 180 GB's of MPEG-2 files now and my little HD is almost full. I don't have enough room to convert all the iPhone 4 counterparts. If I use Compressor 3.5.3, what is the optimal setting for iBook and iPhone .m4v or .mp4 files that can play on both devices? So far 720x400-480 widescreen videos @ 29fps works great on my iPhone, Apple TV 2, and other computers but seems to murder my poor iBook if encoded with high profile (and still choppy on simple profiles). 640x480 (adding black matte bars to my videos) plays fine in MPEG-2 but drops frames or goes to black screen if I convert it to mp4 (and looks bad on the iPhone 4 because of the matte). But if I convert on any of the simple profiles, it looks terrible on my iPhone 4 and a blocky on the iBook.
    This is the problem leading me to having 2 copies of each video and eating my hard disk space. What is the best video setting for both playback on the iBook and iPhone 4? Can the iBook playback H264 at all in decent resolutionsat all? I don't really want to have a 480p .m4v collection for the iPhone 4 and a MPEG-2 RAW collection just to play the same videos on the iBook.
    Any suggestions are greatly appreciated! Thanks!

    Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
    Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
    So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
    If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
    All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
    Is there an easier way?

  • Judder in flash video playback

    I'm having this weird random judder issue when viewing video playback using the flash player (e.g. youtube).  The judder is very noticeable on 2d scrolling videos such as this http://www.youtube.com/watch?v=VAdHJYUjeVo&feature=g-all-u#t=10m40s.  I have gotten the judder to go away only a few times by jumping around video resolutions and using the "show video info" option.  It's totally inconsistent in terms of a fix.  Video info shows that it's running at 30fps and not dropping frames.  I've used current versions of firefox, chrome and IE with the same results.  I'm seriously baffled.
    This just didn't become an issue with the current version of flash.  It's been an issue across many versions of flash. 
    In the ways of the troubleshooting I've tried with no success:
    Uninstalled and reinstalled flash.
    Turned off hardware acceleration.
    Disabled plugins and extensions.
    Uninstalled my antivirus (avira).
    Done a clean wipe and install of my video drivers.
    Disabled aero.
    Any ideas or suggestions would help a lot.  Thanks in advance.
    My dxdiag:
    System Information
    Time of this report: 11/20/2012, 06:32:25
           Machine name: GOZER-PC
       Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830-0333)
               Language: English (Regional Setting: English)
    System Manufacturer: System manufacturer
           System Model: System Product Name
                   BIOS: BIOS Date: 08/29/10 14:41:12 Ver: 08.00.15
              Processor: Intel(R) Core(TM) i7 CPU         950  @ 3.07GHz (8 CPUs), ~3.1GHz
                 Memory: 6144MB RAM
    Available OS Memory: 6136MB RAM
              Page File: 2634MB used, 9633MB available
            Windows Dir: C:\Windows
        DirectX Version: DirectX 11
    DX Setup Parameters: Not found
       User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
        DWM DPI Scaling: Disabled
         DxDiag Version: 6.01.7601.17514 32bit Unicode
    DxDiag Notes
          Display Tab 1: No problems found.
            Sound Tab 1: No problems found.
            Sound Tab 2: No problems found.
            Sound Tab 3: No problems found.
              Input Tab: No problems found.
    DirectX Debug Levels
    Direct3D:    0/4 (retail)
    DirectDraw:  0/4 (retail)
    DirectInput: 0/5 (retail)
    DirectMusic: 0/5 (retail)
    DirectPlay:  0/9 (retail)
    DirectSound: 0/5 (retail)
    DirectShow:  0/6 (retail)
    Display Devices
              Card name: NVIDIA GeForce GTX 480
           Manufacturer: NVIDIA
              Chip type: GeForce GTX 480
               DAC type: Integrated RAMDAC
             Device Key: Enum\PCI\VEN_10DE&DEV_06C0&SUBSYS_14823842&REV_A3
         Display Memory: 4048 MB
       Dedicated Memory: 1488 MB
          Shared Memory: 2560 MB
           Current Mode: 1920 x 1080 (32 bit) (60Hz)
           Monitor Name: Generic PnP Monitor
          Monitor Model: SyncMaster
             Monitor Id: SAM0656
            Native Mode: 1920 x 1080(p) (60.000Hz)
            Output Type: DVI
            Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
    Driver File Version: 9.18.0013.0697 (English)
         Driver Version: 9.18.13.697
            DDI Version: 11
           Driver Model: WDDM 1.1
      Driver Attributes: Final Retail
       Driver Date/Size: 10/2/2012 17:21:00, 18252136 bytes
            WHQL Logo'd: Yes
        WHQL Date Stamp:
      Device Identifier: {D7B71E3E-4580-11CF-4B59-8F341EC2C435}
              Vendor ID: 0x10DE
              Device ID: 0x06C0
              SubSys ID: 0x14823842
            Revision ID: 0x00A3
    Driver Strong Name: oem20.inf:NVIDIA_SetA_Devices.NTamd64.6.1:Section024:9.18.13.697:pci\ven_10de&dev_06c0
         Rank Of Driver: 00E02001
            Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_C ModeWMV9_C
       Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC1,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC2,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC3,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(IMC4,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S340,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {F9F19DA5-3B09-4B2F-9D89-C64753E3EAAB}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
                         {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=
           D3D9 Overlay: Supported
                DXVA-HD: Supported
           DDraw Status: Enabled
             D3D Status: Enabled
             AGP Status: Enabled
    Sound Devices
                Description: Speakers (High Definition Audio Device)
    Default Sound Playback: Yes
    Default Voice Playback: Yes
                Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0889&SUBSYS_104383C0&REV_1000
            Manufacturer ID: 1
                 Product ID: 65535
                       Type: WDM
                Driver Name: HdAudio.sys
             Driver Version: 6.01.7601.17514 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 11/20/2010 05:44:23, 350208 bytes
                Other Files:
            Driver Provider: Microsoft
             HW Accel Level: Basic
                  Cap Flags: 0xF1F
        Min/Max Sample Rate: 100, 200000
    Static/Strm HW Mix Bufs: 1, 0
    Static/Strm HW 3D Bufs: 0, 0
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: No, No
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
                Description: Digital Audio (S/PDIF) (High Definition Audio Device)
    Default Sound Playback: No
    Default Voice Playback: No
                Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0889&SUBSYS_104383C0&REV_1000
            Manufacturer ID: 1
                 Product ID: 65535
                       Type: WDM
                Driver Name: HdAudio.sys
             Driver Version: 6.01.7601.17514 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 11/20/2010 05:44:23, 350208 bytes
                Other Files:
            Driver Provider: Microsoft
             HW Accel Level: Basic
                  Cap Flags: 0xF1F
        Min/Max Sample Rate: 100, 200000
    Static/Strm HW Mix Bufs: 1, 0
    Static/Strm HW 3D Bufs: 0, 0
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: No, No
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
                Description: Digital Audio (S/PDIF) (High Definition Audio Device)
    Default Sound Playback: No
    Default Voice Playback: No
                Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0889&SUBSYS_104383C0&REV_1000
            Manufacturer ID: 1
                 Product ID: 65535
                       Type: WDM
                Driver Name: HdAudio.sys
             Driver Version: 6.01.7601.17514 (English)
          Driver Attributes: Final Retail
                WHQL Logo'd: Yes
              Date and Size: 11/20/2010 05:44:23, 350208 bytes
                Other Files:
            Driver Provider: Microsoft
             HW Accel Level: Basic
                  Cap Flags: 0xF1F
        Min/Max Sample Rate: 100, 200000
    Static/Strm HW Mix Bufs: 1, 0
    Static/Strm HW 3D Bufs: 0, 0
                  HW Memory: 0
           Voice Management: No
    EAX(tm) 2.0 Listen/Src: No, No
       I3DL2(tm) Listen/Src: No, No
    Sensaura(tm) ZoomFX(tm): No
    Sound Capture Devices
    DirectInput Devices
          Device Name: Mouse
             Attached: 1
        Controller ID: n/a
    Vendor/Product ID: n/a
            FF Driver: n/a
          Device Name: Keyboard
             Attached: 1
        Controller ID: n/a
    Vendor/Product ID: n/a
            FF Driver: n/a
          Device Name: Controller (XBOX 360 For Windows)
             Attached: 1
        Controller ID: 0x1
    Vendor/Product ID: 0x045E, 0x028E
            FF Driver: n/a
    Poll w/ Interrupt: No
    USB Devices
    + USB Root Hub
    | Vendor/Product ID: 0x8086, 0x3A36
    | Matching Device ID: usb\root_hub
    | Service: usbhub
    Gameport Devices
    PS/2 Devices
    + Standard PS/2 Keyboard
    | Matching Device ID: *pnp0303
    | Service: i8042prt
    |
    + Terminal Server Keyboard Driver
    | Matching Device ID: root\rdp_kbd
    | Upper Filters: kbdclass
    | Service: TermDD
    |
    + HID-compliant mouse
    | Vendor/Product ID: 0x046D, 0xC051
    | Matching Device ID: hid_device_system_mouse
    | Service: mouhid
    |
    + Terminal Server Mouse Driver
    | Matching Device ID: root\rdp_mou
    | Upper Filters: mouclass
    | Service: TermDD
    Disk & DVD/CD-ROM Drives
          Drive: C:
    Free Space: 585.9 GB
    Total Space: 953.8 GB
    File System: NTFS
          Model: WDC WD1001FALS-00J7B0 ATA Device
          Drive: D:
          Model: ASUS DRW-24B1ST   a ATA Device
         Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), , 0 bytes
    System Devices
         Name: VIA 1394 OHCI Compliant Host Controller
    Device ID: PCI\VEN_1106&DEV_3044&SUBSYS_81FE1043&REV_C0\4&1B359D48&0&10F0
       Driver: n/a
         Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A39
    Device ID: PCI\VEN_8086&DEV_3A39&SUBSYS_82D41043&REV_00\3&11583659&0&D2
       Driver: n/a
         Name: Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A20
    Device ID: PCI\VEN_8086&DEV_3A20&SUBSYS_82D41043&REV_00\3&11583659&0&FA
       Driver: n/a
         Name: Intel(R) 7500/5520/5500/X58 I/O Hub PCI Express Root Port 2 - 3409
    Device ID: PCI\VEN_8086&DEV_3409&SUBSYS_836B1043&REV_13\3&11583659&0&10
       Driver: n/a
         Name: High Definition Audio Controller
    Device ID: PCI\VEN_10DE&DEV_0BE5&SUBSYS_14823842&REV_A1\4&2F1C4782&0&0118
       Driver: n/a
         Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A38
    Device ID: PCI\VEN_8086&DEV_3A38&SUBSYS_82D41043&REV_00\3&11583659&0&D1
       Driver: n/a
         Name: Intel(R) ICH10R LPC Interface Controller - 3A16
    Device ID: PCI\VEN_8086&DEV_3A16&SUBSYS_82D41043&REV_00\3&11583659&0&F8
       Driver: n/a
         Name: Intel(R) 7500/5520/5500/X58 I/O Hub PCI Express Root Port 1 - 3408
    Device ID: PCI\VEN_8086&DEV_3408&SUBSYS_836B1043&REV_13\3&11583659&0&08
       Driver: n/a
         Name: NVIDIA GeForce GTX 480
    Device ID: PCI\VEN_10DE&DEV_06C0&SUBSYS_14823842&REV_A3\4&2F1C4782&0&0018
       Driver: n/a
         Name: Intel(R) ICH10 Family PCI Express Root Port 6 - 3A4A
    Device ID: PCI\VEN_8086&DEV_3A4A&SUBSYS_84181043&REV_00\3&11583659&0&E5
       Driver: n/a
         Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A37
    Device ID: PCI\VEN_8086&DEV_3A37&SUBSYS_82D41043&REV_00\3&11583659&0&D0
       Driver: n/a
         Name: Intel(R) 7500/5520/5500/X58 I/O Hub Throttle Registers - 3438
    Device ID: PCI\VEN_8086&DEV_3438&SUBSYS_00000000&REV_13\3&11583659&0&A3
       Driver: n/a
         Name: Intel(R) 5520/5500/X58 I/O Hub to ESI Port - 3405
    Device ID: PCI\VEN_8086&DEV_3405&SUBSYS_836B1043&REV_13\3&11583659&0&00
       Driver: n/a
         Name: NEC Electronics USB 3.0 Host Controller
    Device ID: PCI\VEN_1033&DEV_0194&SUBSYS_84131043&REV_03\4&CF85AA7&0&0010
       Driver: n/a
         Name: Intel(R) ICH10 Family PCI Express Root Port 3 - 3A44
    Device ID: PCI\VEN_8086&DEV_3A44&SUBSYS_84181043&REV_00\3&11583659&0&E2
       Driver: n/a
         Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A36
    Device ID: PCI\VEN_8086&DEV_3A36&SUBSYS_82D41043&REV_00\3&11583659&0&EA
       Driver: n/a
         Name: Intel(R) 7500/5520/5500/X58 I/O Hub System Management Registers - 342E
    Device ID: PCI\VEN_8086&DEV_342E&SUBSYS_00000000&REV_13\3&11583659&0&A0
       Driver: n/a
         Name: Intel(R) 82801 PCI Bridge - 244E
    Device ID: PCI\VEN_8086&DEV_244E&SUBSYS_82D41043&REV_90\3&11583659&0&F0
       Driver: n/a
         Name: Intel(R) ICH10 Family PCI Express Root Port 1 - 3A40
    Device ID: PCI\VEN_8086&DEV_3A40&SUBSYS_84181043&REV_00\3&11583659&0&E0
       Driver: n/a
         Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A35
    Device ID: PCI\VEN_8086&DEV_3A35&SUBSYS_82D41043&REV_00\3&11583659&0&E9
       Driver: n/a
         Name: Intel(R) 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers - 3423
    Device ID: PCI\VEN_8086&DEV_3423&SUBSYS_00000000&REV_13\3&11583659&0&A2
       Driver: n/a
         Name: Standard Dual Channel PCI IDE Controller
    Device ID: PCI\VEN_1B4B&DEV_91A0&SUBSYS_84001043&REV_12\4&37C265C7&0&0008
       Driver: n/a
         Name: High Definition Audio Controller
    Device ID: PCI\VEN_8086&DEV_3A3E&SUBSYS_84181043&REV_00\3&11583659&0&D8
       Driver: n/a
         Name: Intel(R) ICH10 Family USB Universal Host Controller - 3A34
    Device ID: PCI\VEN_8086&DEV_3A34&SUBSYS_82D41043&REV_00\3&11583659&0&E8
       Driver: n/a
         Name: Intel(R) 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers - 3422
    Device ID: PCI\VEN_8086&DEV_3422&SUBSYS_00000000&REV_13\3&11583659&0&A1
       Driver: n/a
         Name: Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller #2
    Device ID: PCI\VEN_11AB&DEV_4364&SUBSYS_81F81043&REV_12\4&44D0CAE&0&00E5
       Driver: n/a
         Name: Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C
    Device ID: PCI\VEN_8086&DEV_3A3C&SUBSYS_82D41043&REV_00\3&11583659&0&D7
       Driver: n/a
         Name: Intel(R) ICH10 Family SMBus Controller - 3A30
    Device ID: PCI\VEN_8086&DEV_3A30&SUBSYS_82D41043&REV_00\3&11583659&0&FB
       Driver: n/a
         Name: Intel(R) 7500/5520/5500/X58 I/O Hub PCI Express Root Port 7 - 340E
    Device ID: PCI\VEN_8086&DEV_340E&SUBSYS_836B1043&REV_13\3&11583659&0&38
       Driver: n/a
         Name: Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
    Device ID: PCI\VEN_11AB&DEV_4364&SUBSYS_81F81043&REV_12\4&18ABAD59&0&00E2
       Driver: n/a
         Name: Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A
    Device ID: PCI\VEN_8086&DEV_3A3A&SUBSYS_82D41043&REV_00\3&11583659&0&EF
       Driver: n/a
         Name: Intel(R) ICH10 Family 2 port Serial ATA Storage Controller 2 - 3A26
    Device ID: PCI\VEN_8086&DEV_3A26&SUBSYS_82D41043&REV_00\3&11583659&0&FD
       Driver: n/a
         Name: Intel(R) 7500/5520/5500/X58 I/O Hub PCI Express Root Port 3 - 340A
    Device ID: PCI\VEN_8086&DEV_340A&SUBSYS_836B1043&REV_13\3&11583659&0&18
       Driver: n/a
    DirectShow Filters
    DirectShow Filters:
    WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7601.17514
    WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7601.17514
    WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7601.17514
    MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385
    Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385
    WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7601.17514
    WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7601.17514
    Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385
    Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385
    DV Muxer,0x00400000,0,0,qdv.dll,6.06.7601.17514
    Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7601.17713
    WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7601.17514
    Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7601.17514
    AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7601.17713
    VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7601.17713
    SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7601.17528
    Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,6.01.7140.0000
    AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
    StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7601.17528
    MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
    MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7601.17713
    SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
    VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
    MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7601.17528
    Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7601.17514
    SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7601.17528
    Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
    Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
    MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7601.17713
    DV Splitter,0x00600000,1,2,qdv.dll,6.06.7601.17514
    Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7601.17713
    Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7601.17514
    ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7601.17713
    Video Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713
    MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7601.17528
    Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7601.17713
    Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7601.17713
    Video Renderer,0x00400000,1,0,quartz.dll,6.06.7601.17713
    VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7601.17514
    WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7601.17514
    VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7601.17514
    File writer,0x00200000,1,0,qcap.dll,6.06.7601.17514
    iTV Data Sink,0x00600000,1,0,itvdata.dll,6.06.7601.17514
    iTV Data Capture filter,0x00600000,1,1,itvdata.dll,6.06.7601.17514
    DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7601.17713
    Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7601.17713
    AVI Draw,0x00600064,9,1,quartz.dll,6.06.7601.17713
    RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll,
    Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514
    WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7601.17514
    MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528
    DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7601.17514
    SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7601.17514
    Null Renderer,0x00200000,1,0,qedit.dll,6.06.7601.17514
    MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7601.17514
    Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7601.17514
    StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7601.17528
    Smart Tee,0x00200000,1,2,qcap.dll,6.06.7601.17514
    Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7601.17713
    AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713
    AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7601.17713
    Wave Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
    MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
    Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713
    File stream renderer,0x00400000,1,1,quartz.dll,6.06.7601.17713
    Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000
    StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7601.17528
    AVI Mux,0x00200000,1,0,qcap.dll,6.06.7601.17514
    Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7601.17713
    File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7601.17713
    File Source (URL),0x00400000,0,1,quartz.dll,6.06.7601.17713
    Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7601.17514
    Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7601.17514
    BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7601.17669
    MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7601.17713
    WDM Streaming Tee/Splitter Devices:
    Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
    Video Compressors:
    WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385
    WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385
    MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385
    DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7601.17514
    MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7601.17713
    Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7601.17514
    Fraps Video Decompressor,0x00200000,1,1,qcap.dll,6.06.7601.17514
    Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
    Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514
    Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7601.17514
    Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7601.17514
    Audio Compressors:
    WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385
    WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385
    IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
    PCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
    Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713
    GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7601.17713
    CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
    CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713
    MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7601.17713
    PBDA CP Filters:
    PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7601.17528
    PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
    PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528
    Midi Renderers:
    Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
    Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7601.17713
    WDM Streaming Rendering Devices:
    HD Audio Speaker,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
    HD Audio SPDIF out 5,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
    HD Audio SPDIF out,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
    BDA Network Providers:
    Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
    Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
    Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
    Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514
    Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7601.17514
    Multi-Instance Capable VBI Codecs:
    VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514
    BDA Transport Information Renderers:
    BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7601.17669
    MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7601.17514
    BDA CP/CA Filters:
    Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7601.17708
    Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7601.17708
    PTFilter,0x00200000,0,0,EncDec.dll,6.06.7601.17708
    XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7601.17708
    WDM Streaming Communication Transforms:
    Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514
    Audio Renderers:
    Speakers (High Definition Audio,0x00200000,1,0,quartz.dll,6.06.7601.17713
    Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7601.17713
    Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7601.17713
    Digital Audio (S/PDIF) (High De,0x00200000,1,0,quartz.dll,6.06.7601.17713
    DirectSound: Digital Audio (S/PDIF) (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713
    DirectSound: Speakers (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713
    EVR Power Information
    Current Setting: {5C67A112-A4C9-483F-B4A7-1D473BECAFDC} (Quality)
      Quality Flags: 2576
        Enabled:
        Force throttling
        Allow half deinterlace
        Allow scaling
        Decode Power Usage: 100
      Balanced Flags: 1424
        Enabled:
        Force throttling
        Allow batching
        Force half deinterlace
        Force scaling
        Decode Power Usage: 50
      PowerFlags: 1424
        Enabled:
        Force throttling
        Allow batching
        Force half deinterlace
        Force scaling
        Decode Power Usage: 0

    Thank you for replying.
    Bug report has been submitted.
    I'm pretty sure the judder has always been there.  Sometimes it's more pronounced and sometimes it's not.  As I said it's very inconsistent.  But 95% of the time there is judder.
    I tried uninstalling and reinstalling flash ver. 10.3.183.43 and unfortunately it did not fix it.
    It's so weird.  It really looks like it's dropping fps at random and yet flash player video info says it's fluctuating between 29-31 fps and not dropping frames.
    I really don't understand how me going back and forth between resolutions and fullscreen and right clicking on the video to bring up video info will make it go away randomly.

  • When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

    When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi  using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

    It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
    I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
    Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
    To answer your questions,
    1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
    2. Make sure the two iPhones have different names to reduce sync/restore issues.
    3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
    Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
    Let me know if you need any more tips for iPhoning across the pond.

  • Connecting the canon SX50 to HDTV for video playback???

    Connecting the canon SX50 to HDTV for video playback???
    ok, Got this Camera, like it, except for a few confusing issues. I was told, in order to playback HD video onto my HDTV Samsung, with an HDMI4 on the left side of the TV, all I needed was a HDMI to HDMI cable.
     (#1) Shut off both TV and camera, plug the cable into this HDMI plugin, turn on the TV and Camera power supply, and it should recognize, then start paying.
    Well, I did it both ways, (#1) shut off,then turn on, and (#2) I just inserted the camera's HDMI to the HDMI4 while both were on, and tried opening up the Samsung's' Tools >Inputs, etc, and still nothing!
    Is there an easy way to accomplish this?
    The second issue i'm having , is how to shut off the slow motion playback, when viewing the videos, which were not recorded in slow--mo, and it's frustrating trying to playback in normal speed, but instead it plays in slow-mo.
    I'm not quite sure I'm recording in full HD...The payback is only 60i

    Thanks grazie!
    Well, i accomplished most of that and at least got the video on the display (Samsung Anynet HDMI3) But no sound!
    I was also able to control the SX50 TV Display with my samsung remote, kool.
    As far as the playbgack volume, I checked the camera, I did notice the OPERATIONAL SOUND was off, but when I played back the video on the camera itself, i did have volume.
    On that subject of Slow motion videos, if i'm watching each video, then see one playing back in slow-motion, does that mean i actually filmed it in slow motion, without knowing? ( i can send it through Pinnacle Studio 15HD and speed it back up, but theres no background volume anyway)  if i did unknowingly videotaped in slow motion, i bettter be more observant in the future.
    I'm going to increase that ''Operational sound'' on the tools / Camera and try to playback to see if I have any sound.
    I have a Yamaha 7.1 reciever, and TV, BD player,Time-Warner cable all is connected to this receiver....I was pushing all buttons for inputs to see which one would work for sound with video, but could not find any.  Thanks, or grazie grazie!

  • Sony HDV Walkman not seen for video playback

    Hello.
    Bit of a problem - have just taken delivery of two spanking new Sony GV-HD700E decks to use in our edit suites at work.
    Capturing from the decks works like a charm in both HDV (at both 1080i50 and 25p) and DV-PAL (4:3 and Anamorphic). Playback controls are also working fine.
    The problem is when I use 'Print To Video' - everything works fine in DV, but unfortunately the settings under 'Video Playback' for all HDV formats are greyed out - I can't get ANY playback in HDV to the deck at all.
    I've tried all the HDV Device Control Presets without success (including unplugging the Firewire cables, restarting the deck and the Mac after each change).
    The Sony site says the device definitely takes HDV in, so I was just wondering if it's a driver issue?
    Any ideas?
    Thanks.
    Jim
    NB - I did plug the Firewire cables back in each time...
    OS 10.5.2
    FCP 6.0.2
    MBP 2.33 and Mac Pro 8-core 3 GHz
    Message was edited by: blooblooblum

    What that means is you cannot externally monitor HDV without a 3rd party card or box. You can, however, Print to Video with HDV. I've done it successfully with a Sony V1U with FCS 1 (FCP 5.1.4) and now with FCS 2.
    If everything is connected and powered up in the proper order, it should work with the same Easy Setup used to originally capture the footage for the project.
    It's very important that the camera or deck be connected to the mac via firewire and then powered up before the computer is turned on. After powering up the mac, launching FCP, and opening your project, make sure the timeline window with your finished, rendered/conformed sequence is activated.
    Then, go to Print to Video, make your selections, select the 'Start Recording Automatically' box, and hit OK. Your sequence will do some additional conforming, and then your camera/deck should begin to record as the sequence plays out.
    In addition, make sure other firewire devices and cables are disconnected during the Print to Video operation. I've done it successfully with other drives and devices connected, but it could cause problems with certain setups.
    Message was edited by: Red Jacket Mike

  • Higher volume for video playback?

    Hello everyone!
    I am new to the boards and to the touchpad.  I have a question about adjusting the volume in video playback.  I woudl like to know while during the conversion process, are there any converters out there that can boost the volume?  I have been playing with Movavi, AVS, and Cucusoft.  I am converting an AVI to MPEG-4 or Ipad format, whichever is on the menu.  When I transfer the converted file, the video looks great and the audio plays back.  However, the volume to me is not high enough.  I have also used my headphones and it still does not play as loud as my iphone 4 and they are basically the same file and format.  I bought this because of the price and I am going on vacation later this year and I want to use it on the plane so that is why I am having the volume issue.  To me it seems it wont be loud enough on the plane.   Is there anything I am missing?  I have also tried to upgrade to the latest OS version but the TP is always coming back with the unable to connect message.  I am still working on that.  I cant get the web doctor to work but that is another thread.
    Thanks very much
    Post relates to: HP TouchPad (WiFi)

    Ok, I think I have mastered how to convert my movies to play on the TP with no issues.  However, I need to somehow increase the volume level of the converted movie.  I have already installed the preware option that increases the internal volume levels, but some of the movies I have converted seem a little low for my taste.  I have been trying trial versions of several video converters such as DVD fab, Xilisoft, Cucusoft and others but I like Handbrake's track record and it's free!
    What I would like to know is if there is a volume setting in Handbrake?  If not does anyone know a way to increase the volume levels when you convert movies any other way?
    Thanks very much.
    Post relates to: HP TouchPad (WiFi)

  • PPro engine for video playback question

    Joe mentioned in another thread that Encore 2.0 uses "PPro engine ... for video playback, instead of DirectShow". Does this imply that Encore DVD requires a CPU with the SSE2 instruction set like PPro does? Thanks.

    Yes.

Maybe you are looking for

  • WAITED A YEAR FOR THE PRE ON VERIZON---HAS MS EXCHANGE PROB BEEN FIXED--WILL I HAVE TO REPLACE WITH DROID?

    Well this is my first post.  Hopefully not my last...but we'll see.  I have waited a year for the Pre to get to Verizon and now that I have purchased it I find out that I cannot connect with our server to get access to outlook.  I have email and it s

  • Can we set the query timeout value in a global control place?

    hi everyone, We use the FullTextSqlQuery class to do query stuff, but we have the query timeout issue, the query sometimes timeout, sometimes is normal.  I know there is a property from Query class called Timeout, and the default time is 15 seconds,

  • Learning Acrobat X Pro

    I downloaded Arobat X Pro trial, but I having trouble learning to use it.  The videos won't download and I didn't find one with the basics, anyway.  "Help" isn't muc help.  Is there a short tutorial somewhere with the basics?  Can I edit words in a f

  • How can I change the value used in a Criteria Rule in a Subscription agent

    Dear mobile heroes.... How can I change the value used in a Criteria Rule in a Subscription agent in a quality environment? (CRM 70 SP04). I have built a subscription agent in dev, which uses a static where clause to filter activity_object on VKORG.

  • My upgraded flash drive is not working in Firefox

    While in Firefox, all video files are requesting that I upgrade my flash drive. I have done so a dozen times and it does not seem to do anything. While on Mozilla it seems to work fine. is there something I need to do in Firefox to make it work? Than