IOException when trying to read HttpConnection input (MIDP 2.0-CLDC 1.0)

Hello!
I'm using the Java ME Platform SDK 3.0, on a Windows XP machine.
The midlet's code runs successfully with the emulator, but when i execute it on my motorola c650 (MIDP 2.0-CLDC 1.0), whenever i call the getInputStream method, it hangs for a while (say, 1 second), and then i get an IOException at that point.
I already tried:
- call getResponseCode before; i get an IOException at that point
- use POST method instead of GET
- call openOutputStream before openInputStream
- use getDataInputStream instead of getInputStream
HttpConnection c = (HttpConnection)Connector.open(url);
c.setRequestMethod(HttpConnection.GET);
InputStream is = c.openDataInputStream();
...Nothing helps... but the same code works on a motorola v3 black (MIDP 2.0-CLDC 1.1)
Thanks in advance!

Oh,
these are a little bit old handsets, aren't they?
Anyway I can remember that especially on C650 we've experienced some firmware issues. However if this happens also on V3 I can only recomend to check the access point configuration. These old motorolas must be set up correctly and differently for using internal browser (using a WAP access point) and differently for using from within Java applications (using an internet access point).
Rada

Similar Messages

  • Getting an error 33162 when trying to read analog input on FP

    I am getting a error when trying to do a simple analog input read using Field Point. I have a FP-2000 network module and am trying to read channel 0 at FP-TB-10 @3 which has an AI-C420 analog input module in place. There is no definition for the error and I can read the signal from Field Point Explorer just fine.
    I have downloaded the example continuous read vi from the web site and it does not work either. It seems that this should not be complicated but this is not the 1st problem I have had. I will take any suggestions. Thank you.

    Mike,
    Error code 33162, "Can not connect to item on module," generally is the result of attempting to connect to an item that is not available at the first connection attempt. This is frequently the result of an ethernet network module being offline when you attempt to connect to it. Since you are able to connect from FieldPoint Explorer, I suspect something else is going on. The likeliest possibilities that I can think of are:
    1) You have more than one ethernet Comm Resource in your IAK file and you have provided the name for the wrong resource (e.g. you may have had a different IP address and created a new Comm Resourcefor the new IP address, but left the old one in place and are using the wrong one).
    2) Similar to #1 above, you changed the IP address in
    the Comm Resource but did not save the change so there is no module at the IP address it is attempting to communicate with.
    3) There is a misconfiguration in the IAK file and the FP-TB-10 shows a listing for a digital module at address 0 rather than an analog module.
    4) The module is misaddressed. I have occasionally seen instances where the protective end cover was not installed on the last terminal base and a piece of metal shorted some of the pins causing the addressing to be incorrect. Since this method of failure would also show up in FieldPoint Explorer, I do not think it is likely the root cause of your problem.
    5) You have booted the FP-20xx in Safe Mode (although FieldPoint Explorer will not work in this case so I do not think it is likely).
    Note: If you had successfully connected and then lost the connection, the error code is 33163, "The connection to the module has been broken."
    Regards,
    Aaron

  • URL stream throws exception when trying to read from input stream

    Hi guys,
    I tried reading from an input stream which returned a 401. Actually, the server side returns 401 whenever the application server cannot fulfill the client's request, however the 401 contains a message which I will like to read.
    I have tried this with mozilla and the return message is properly displayed even at 401. How can I read this message?

    Oracle home is pointing to wrong location.When we made the change to corrent location.Then we rebuilt the jar file started the managed server it is working fine.

  • Error message when trying to read ebook E_AUTH_BAD_DEVICE_KEY_OR_PKCS12

    has anyone had this happen, error message when trying to read ebook E_AUTH_BAD_DEVICE_KEY_OR_PKCS12

    deauthorize (shift-ctrl-d) and then restart ade.  you will be prompted to re-authorize.

  • YOUR Message "There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (0:104)" keeps occuring when trying to read.

    YOUR Message "There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (0:104)" keeps occuring when trying to read.

    Hi tanjam38435898,
    Please refer this thread Links as it seems relevant to your query : Re: Error Code 0:104
    hope that helps
    Regards,
    Rahul

  • Why tcp closed by peer when trying to read msg after the successful Listen?

    Hi everyone,
    I had trouble to read data after Listen function return a good connection ID. The embedded application is running in ARM processor and I build a PC application with Labview to read the device status via TCP connecion. There are required two TCP connections between embedded application and PC application with specific port to listen on each side. After exchange port number by UDP message, both sides know the destination port to send msg. I can send request to embedded apllication in one TCP connection then listen to other TCP connection for reply. By monitroing the traffic of network card, I can see the successful TCP open sequence and in coming reply data, but Labview application shows error 66 "network connection closed by peer" when trying to read data, which is quite strange. I already see those data with network monitor tool, such as wire shark.
    Did anybody experience the similar problem? and provide some suggestion? Is it problem of configuration of Labview? windows XP? I am using Labview 6.1.
    Thanks
    Lei
    Solved!
    Go to Solution.

    LeiJ wrote:
    Thanks Mike,
    The problem was solved. It is timing issue. There is another while loop in code which sends heartbeat UDP message regularly for ervry 10 seconds, and this cause the problem of TCP read function. If I stop or remove this thread of while loop, the read function works fine. The UDP heartbeat message is only need to use once at first beginning to broadcast port number when setup TCP connection. Possibly I can send the heartbeat somewhere esle. I think the TCP error code 56 (timeout) and 66 (network connection closed by peer) is not distinguished in TCP read function. Thank you for reply and suggestion.
    Regards
    Lei
    Actually LabVIEW distinguish between these errors very specifically. If you get an error 66 the connection was closed for sure, either explicitedly by the peer of implicitedly by the TCP IP stack after loosing the connection for to long such as when the Ethernet card would be disabled.
    The issue most likely is that your client after sending back an open-package expects a specific response in a specific amount of time and closes the connection down if it does not get a valid response. Seems like a good measure to try to minimize the resources on your embedded target that need to be allocated when a badly behaving client is looping in a connection attempt.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Macbook (black) first edition hangs when trying to read Serial-ATA

    My Macbook recently died on me. In thinking it was my hard disc I have installed a new one. It did find it briefly when trying to install Snow Leopard again this failed since it could not communicate with the hard disc. Now I am stuck, using the System Profiler it just hangs when trying to read the Serial-ATA device tree.
    Any idea of what is wrong and if it is worth repairing it?
    with kind regards,
    Christian

    Turns out that the brand new Seagate that I got was faulty. Have now installed yet another drive and this seems to have done the trick.

  • New computer with lightroom 5.7 installed old computer has 3.6 installed.The new version has a conflict when trying to read the external harddrives.Old sees it as drive (I) but new sees it as drive(E).When I try to rename external drive it comes up as LaC

    New computer with lightroom 5.7 installed old computer has 3.6 installed.The new version has a conflict when trying to read the external harddrives.Old sees it as drive (I) but new sees it as drive(E).When I try to rename external drive it comes up as LaCie (E) (I) so I cannot get it to change the name for lightroom to read it with all the previous edits-please help all advice appreciated.

    lotta stuff going on.  I'm in the office now and don't expect a client for about 45 minutes.  Want to walk thru this via skype or ichat?  email me directly if you do.  [email protected]
    If not, post back and I'll try and walk thru these things. 
    Also, if you want to email me the project, I'll see if I can open it here. 

  • Error 7 occurred when trying to read a spreadsheet file in LabVIEW

    Hi,
    I got the message (in bold) below when I was trying to read a text file type. I also include a snippet of my block diagram.
    Error 7 occurred at Open File+.vipen File
    Possible reason(s):
    LabVIEW:  File not found. The file might have been moved or deleted, or
    the file path might be incorrectly formatted for the operating system.
    For example, use \ as path separators on Windows, : on Mac OS X, and /
    on Linux. Verify that the path is correct using the command prompt or
    file explorer.
    I really appreciate if someone can help me. Thanks.
    Attachments:
    read from spreadsheet.png ‏70 KB

    Hi Ravens Fan,
    Thanks again for your valuable input. I replaced the string manipulation functions with a path control. I think it works coz I can see the waveform data, rms values etc. And then you said if it works, do a Path to String on that...and I'm not exactly sure how to do that. I attached a snippet of the modified vi. you may refer the original vi snippet in my previous email.
    I appreciate it if you could help me again.
    Thanks.
    Attachments:
    read from spreadsheet2.png ‏283 KB

  • VISA error when trying to read hex data over serial port

    Hi - Sorry about this. I am posting this question as a new thread as I am still having serious problems and may be able to shed more light now.
    Basically I am trying to read data formatted as a string of comma separated hexadecimal words over the serial link.
    The data is formatted thus:  <first word>,  <second word>, <third word> etc.... <last word, <CR>  where <CR> is a carriage return.
    Where each word represents a number, e.g.  AB01 is 43777 in decimal.
    Now the VI is stalling at VISA close (I attach VI again to this message), the string data is read across by the VI but it will not then close the link unless I remove to USB cable from the comms port.  When I run the device in hyperterminal I do not have this problem.  The data sting comes back fine (when I send out the command message), the carriage return is recognized as the end of the data message and the comma channel is cleared and ready to accept the next command message.
    LabVIEW is then not happy.  I don't know why but it could be that the amount of data the demo device I have is sending back is more than the NI-VISA can cope with.  Am I correct in thinking 13kbytes is the maximum.  If this were the case This would account for my problem.  It seems that the number of bytes read by the VI is consistently 12999.
    Hope someone can help or this information will at least be useful to somebody so they don't have this problem.
    Many Thanks
    Ashley.

    Yes there is. If your data contains data from 0x00 to 0xFF then you have to disable the 'termination char' in the VISA configure function. The boolean input at the top. Set it to false. Otherwise your transmission will stop at 0x0A by default. You can also tell what the termination character should be, if you want.
    btw. Still no VI attached. 
    Sorry replied to the wrong message. No I did not where are both replying at the same time
    Message Edited by K C on 12-08-2005 12:44 PM
    Message Edited by K C on 12-08-2005 12:46 PM

  • I am getting a -50101 error when trying to get analog input from a compact rio

    I am just doing the initial setup of my compactRIO system and have been able to successfully add the cRio in Max and then into a new project.  I created a very simple VI with analog input that I am trying to read into an indicator, following one of teh tutorials.  The module I am reading the input from is a cRio-9201.  The input is voltage.  I have already added the module to teh project under the FPGA, which is under the RIO in the project tree.  Any ideas what I may be missing would be greatly appreciated!
    Thanks

    The 9201 C Series module needs to be created under the FPGA Target
    (cRIO-910x) in the LabVIEW Project. You can either discover the module
    or create it by type. In case you haven't created the FPGA Target
    (cRIO-910x) under the cRIO Controller (cRIO-900x), you must do that
    first. You also have the option of discovering the cRIO-910x or to
    create it by type. I suggest you do it through discovery, so you don't
    need to manually configure the addresses.
    As how to create the items, that's done through right-click on the
    cRIO-900x and select New>>Targets and Devices.... It will pop up
    a dialog in which you expand FPGA Target and it will discover the FPGA
    Target. Similar steps are followed to create the 9201 module.
    If you don't see the FPGA Target and C Series module options, then you
    need to make sure NI-RIO 2.0 is installed in you computer.
    JMota

  • Build error Caught IOException when trying to copy files

    Hello,
    Sometimes when I build a BPM project in NWDS I get this error,
    Caught IOException "C:\NWDSWS.jdi\LocalDevelopment\MINSUR_BPM\demo.com\bpm_hrsolpos_v2\_comp\gen\default\public\def_cmp\lib\moin\demo.combpm_hrsolpos_v2def_cmp.zip (the process doesn't have acces to the archive because it's been used by another process)" when trying to copy files from "C:\NWDSWS.jdi\LocalDevelopment\t2\CAC172530F2EFDDCD642AFD09DBA1782\default\" to "C:\NWDSWS.jdi\LocalDevelopment\COMP_BPM\demo.com\bpm_hrsolpos_v2\_comp\gen\default\"
    Anyone knows how to solve this?
    Regards
    SU

    Hi
    I had the same problem.
    Just if other get the same issue
    I solved it by logging of the computer with NWDS and logon again.
    Daniel

  • -251723760 CIP Error when trying to read and array of sgl from and AB ControlLogix PLC

    I have the NI Ethernet/IP module to communicate with an Allen-Bradley ControlLogix PLC. I am doing both reading (only 13 values) and writing (over 200 values). I am using the basic ethernetip tag write.vi to  do the writing. These program are in an executable running on a 'run-time' machine. I have the list of tagnames I am reading and writing to and have confirmed with the person who created the AB load that the array I am writing to on the AB side has more than enough addresses (it is an array of length 300). However I am only able to write 118 values to it. When trying to write 119 or more I get the error:
    -251723760 CIP error - extended status may be available
    I have confirmed with NI OPC Servers with an OPC quick client (running on my development PC) connected to the AB ControlLogix that the values I am writing to up to element 118 are getting through correctly, i.e. if I write 123.456 to sample_array[13] then I in fact see this same value at that location in the OPC quick client.
    To be honest I am a little disappointed that the error message is so cryptic and gives no hints as to what troubleshooting paths are possible. I have tried various combinations of group/tag names with and w/o offsets, e.g. [3], but nothing has led me any further.

    Thanks for the quick response - here are screenshots of before (write OK - writing 118 values - all except last are 0) and after (error - when trying to write an array of length 119) as well as the simple test program I as using.
    Attachments:
    NI Ethernet_IP 3-20-2013 Troubleshooting.zip ‏90 KB

  • Error -196739070​4 when trying to read historical data from CITADEL

    I am trying to read historical data for 8 tags in a 'for loop'. If I run the historical vi while my data collection vi is running, I get the error -1967390704 CIT_ReadTrace.vi error code 0x8abc010. I have installed the DSC6.1 fixes and also updated the logos version to 4.4. Is it generally a good practice to not access historical data while new data could still be written to CITADEL?? Is there a vi or anything that could check the versions of all the installed NI software to the latest versions that are available??

    I had some major problems when I installed the latest updates. I unzipped to the wrong directory and had multiple copies of some labview files. It really made for some strange operation. Right now I am running labview 6.1 with feb26,2003 updates from the web, logos version 4.4.0.17. It sounds like your database may be corrupted. They also sent me a file to workaround a read issue with the historical vi's.
    Attachments:
    BenchReadHistTrend.llb ‏104 KB

  • Facing error when trying to read message from MQ through B2B

    Hi,
    I'm trying to read the messages from MQ through B2B.
    I have created a listening channel in B2B console.
    Also place the required jar files in the Domain_Dir/lib folder.For your reference the jar files are given below,
    a. com.ibm.mqjms.jar
    b. dhbcore.jar
    c. com.ibm.mq.jar
    d. com.ibm.mq.jmqi.jar
    e. mqcontext.jar
    g. com.ibm.mq.commonservices.jar
    h. com.ibm.mq.headers.jar
    i. com.ibm.mq.pcf.jar
    But i'm encounter the below error while reading the MQ. Pls let me know if i'm missing something.
    ####<Oct 9, 2014 4:00:03 PM IST> <Error> <oracle.soa.b2b.engine> <ULCAKESBTD1P> <b2b-server> <Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms
    > <<anonymous>> <> <0000KZoSn1y5YbWzLwyGOA1KDaCI000002> <1412850603388> <BEA-000000> <oracle.tip.b2b.transport.TransportException: [JMS_CONN_INVALID] JMS connection error.
      at oracle.tip.b2b.transport.TransportException.create(TransportException.java:93)
      at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:199)
      at oracle.tip.b2b.transport.basic.jms.JMSMonitor.<init>(JMSMonitor.java:181)
      at oracle.tip.b2b.transport.basic.JMSReceiver.init(JMSReceiver.java:266)
      at oracle.tip.b2b.transport.b2b.B2BTransport.init(B2BTransport.java:577)
      at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:240)
      at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
      at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
      at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    Caused by: oracle.tip.b2b.transport.TransportException: [JMS_CONN_FAC_NOT_FOUND] JMS_CONN_FAC_NOT_FOUND
      at oracle.tip.b2b.transport.TransportException.create(TransportException.java:78)
      at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:208)
      at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getQueueConnectionFactory(JMSConnectionFactoryFactory.java:85)
      at oracle.tip.b2b.transport.basic.jms.JMSConnection.<init>(JMSConnection.java:136)
      at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:195)
      ... 7 more
    Caused by: java.lang.ClassNotFoundException: QMUL.PDT
      at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
      at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
      at java.security.AccessController.doPrivileged(Native Method)
      at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
      at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
      at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
      at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
      at java.lang.Class.forName0(Native Method)
      at java.lang.Class.forName(Class.java:190)
      at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:162)
      ... 10 more
    oracle.tip.b2b.transport.TransportException: [JMS_CONN_INVALID] JMS connection error.
      at oracle.tip.b2b.transport.TransportException.create(TransportException.java:93)
      at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:199)
      at oracle.tip.b2b.transport.basic.jms.JMSMonitor.<init>(JMSMonitor.java:181)
      at oracle.tip.b2b.transport.basic.JMSReceiver.init(JMSReceiver.java:266)
      at oracle.tip.b2b.transport.b2b.B2BTransport.init(B2BTransport.java:577)
      at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:240)
      at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
      at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
      at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    Caused By: oracle.tip.b2b.transport.TransportException: [JMS_CONN_FAC_NOT_FOUND] JMS_CONN_FAC_NOT_FOUND
      at oracle.tip.b2b.transport.TransportException.create(TransportException.java:78)
      at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:208)
      at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getQueueConnectionFactory(JMSConnectionFactoryFactory.java:85)
      at oracle.tip.b2b.transport.basic.jms.JMSConnection.<init>(JMSConnection.java:136)
      at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:195)
      at oracle.tip.b2b.transport.basic.jms.JMSMonitor.<init>(JMSMonitor.java:181)
      at oracle.tip.b2b.transport.basic.JMSReceiver.init(JMSReceiver.java:266)
      at oracle.tip.b2b.transport.b2b.B2BTransport.init(B2BTransport.java:577)
      at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:240)
      at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
      at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
      at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    Caused By: java.lang.ClassNotFoundException: QMUL.PDT
      at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
      at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
      at java.security.AccessController.doPrivileged(Native Method)
      at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
      at java.lang.ClassLoader.loadClass(ClassLoader.java:424)
      at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
      at java.lang.ClassLoader.loadClass(ClassLoader.java:357)
      at java.lang.Class.forName0(Native Method)
      at java.lang.Class.forName(Class.java:190)
      at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:162)
      at oracle.tip.b2b.transport.basic.jms.JMSConnectionFactoryFactory.getQueueConnectionFactory(JMSConnectionFactoryFactory.java:85)
      at oracle.tip.b2b.transport.basic.jms.JMSConnection.<init>(JMSConnection.java:136)
      at oracle.tip.b2b.transport.basic.jms.JMSMonitor.init(JMSMonitor.java:195)
      at oracle.tip.b2b.transport.basic.jms.JMSMonitor.<init>(JMSMonitor.java:181)
      at oracle.tip.b2b.transport.basic.JMSReceiver.init(JMSReceiver.java:266)
      at oracle.tip.b2b.transport.b2b.B2BTransport.init(B2BTransport.java:577)
      at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:240)
      at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
      at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
      at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    >
    ####<Oct 9, 2014 4:00:20 PM IST> <Warning> <oracle.adfinternal.view.faces.partition.FeatureUtils> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KZoSn1y5YbWzLwyGOA1KDaCI000002> <1412850620868> <ADF_FACES-30130> <Ignoring feature-dependency on feature "AdfDvtCommon".  No such feature exists.>
    ####<Oct 9, 2014 4:00:21 PM IST> <Warning> <org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000KZoSn1y5YbWzLwyGOA1KDaCI000002> <1412850621197> <BEA-000000> <Configurator services already initialized.>
    ####<Oct 9, 2014 4:00:30 PM IST> <Notice> <Log Management> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1412850630361> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
    ####<Oct 9, 2014 4:00:30 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <main> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac6> <1412850630614> <BEA-000365> <Server state changed to ADMIN>
    ####<Oct 9, 2014 4:00:30 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <main> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac6> <1412850630698> <BEA-000365> <Server state changed to RESUMING>
    ####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631051> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:214:4fff:feeb:478d:7003 for protocols iiop, t3, ldap, snmp, http.>
    ####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631051> <BEA-002613> <Channel "Default[1]" is now listening on 10.236.77.12:7003 for protocols iiop, t3, ldap, snmp, http.>
    ####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631052> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:214:4fff:feeb:478c:7003 for protocols iiop, t3, ldap, snmp, http.>
    ####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631053> <BEA-002613> <Channel "Default[4]" is now listening on 127.0.0.1:7003 for protocols iiop, t3, ldap, snmp, http.>
    ####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631053> <BEA-002613> <Channel "Default" is now listening on 192.168.107.97:7003 for protocols iiop, t3, ldap, snmp, http.>
    ####<Oct 9, 2014 4:00:31 PM IST> <Notice> <Server> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631054> <BEA-002613> <Channel "Default[5]" is now listening on 0:0:0:0:0:0:0:1:7003 for protocols iiop, t3, ldap, snmp, http.>
    ####<Oct 9, 2014 4:00:31 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac8> <1412850631055> <BEA-000332> <Started WebLogic Managed Server "b2b-server" for domain "b2b-domain" running in Development Mode>
    ####<Oct 9, 2014 4:00:32 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <main> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac6> <1412850632557> <BEA-000365> <Server state changed to RUNNING>
    ####<Oct 9, 2014 4:00:32 PM IST> <Notice> <WebLogicServer> <ULCAKESBTD1P> <b2b-server> <main> <<WLS Kernel>> <> <308025e28c55d051:50252314:148f4730231:-8000-0000000000007ac6> <1412850632559> <BEA-000360> <Server started in RUNNING mode>
    ####<Oct 9, 2014 4:00:38 PM IST> <Warning> <oracle.soa.services.notification> <ULCAKESBTD1P> <b2b-server> <TimerFactory> <<anonymous>> <> <0000KZoSn1y5YbWzLwyGOA1KDaCI000002> <1412850638612> <BEA-000000> <<.> Notification via email, voice, SMS or IM will not be sent. If you would like to enable them, please configure corresponding sdpmessaging driver. Then modify the accounts and set NotificationMode attribute to either NONE, EMAIL or ALL in workflow-notification-config.xml>
    ####<Oct 9, 2014 4:02:41 PM IST> <Warning> <Socket> <ULCAKESBTD1P> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a2e657fa9e6b5d11:789eb8cc:148f4403946:-8000-00000000000029c4> <1412850761335> <BEA-000449> <Closing socket as no data read from it on 192.168.96.66:29,963 during the configured idle timeout of 5 secs>
    ####<Oct 9, 2014 4:02:51 PM IST> <Warning> <Socket> <ULCAKESBTD1P> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a2e657fa9e6b5d11:789eb8cc:148f4403946:-8000-00000000000029d2> <1412850771337> <BEA-000449> <Closing socket as no data read from it on 192.168.96.66:29,970 during the configured idle timeout of 5 secs>
    ####<Oct 9, 2014 4:03:16 PM IST> <Warning> <Socket> <ULCAKESBTD1P> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <a2e657fa9e6b5d11:789eb8cc:148f4403946:-8000-00000000000029f4> <1412850796335> <BEA-000449> <Closing socket as no data read from it on 192.168.96.66:29,984 during the configured idle timeout of 5 secs>
    Thanks,
    Ravindra.

    Hi Ravindra,
    Which mode of connectivity are you trying (credential based / .bindings based)
    MQ connectivity  support is provided via JMS offering of Oracle B2B. This blog post will provide you the steps for the same - https://blogs.oracle.com/oracleb2bgurus/entry/b2b_communication_using_ibm_mq
    Please ensure to provide the proper values for connection factory and other details in JMS configuration in B2B
    HTH

Maybe you are looking for

  • AppleTV - iTunes8 - ALL Syncing DEAD

    Just an additional post to my others in the iTunes forum, incase Apple is watching this forum more or someone over here knows something the people over don't. ON WINDOWS ONLY. Since iTunes 8 all airtunes, AppleTV sync has become very problematic. Tri

  • Report.Services 2008 - get page-count or row-count in the c#-code

    hello is it possible to get from the ReportViewer-control / ServerReport the page-count or row-count after the reportViewerCheck.ServerReport.Refresh(); statement ?? many thanks in advance for any clue & regards Michael

  • Spread out x-axis points to smooth out line graph

    Hi guys, I've been given some figures that I've displayed into a graph...However, there are some values that have been taken every 2 weeks and then there's like a 6 month gap. I'm wondering if it's possible to space out the dates relevent to duration

  • Updating CV (delete entry which does not match the criteria any more)

    Hi, A MV synchronises entries in a CV (MVtoCV) depending of a criteria (flag). OwnerShip=Meta view. An MVentry is created. If this MVentry doesn't match the criteria, not synchronized in the CV=OK If this MVentry matchs the criteria, synchronized in

  • How to configure iphone when touch screen wont respond

    my touch screen wont work. I plugged into laptop and it restored and now wantsa to set up new iphone but the slide to configure wont work because the touch screen isnt working. any ideas