IOS 5.1.1 update BAD for General Motors factory-issued Bose Stereo Computers
Yesterday I could listen to my music in my Cadillac CTS via the GM factory USB cable that plugs into the factory-installed 40GB Bose touchscreen stereo. Today, all I did was update my iPhone 4 to iOS 5.1.1, fire up my car, plug the ol' iPhone into the ol' USB as usual and, now, the stereo computer that has recognized it since I bought it (many updates ago) CANNOT recgonize it...
The GM/Bose stereo computer scans the drive and reads it as "Source Unknown".
Please Apple... HELP ME. .1 is ruining my entertainment experience. A communication breakdown between such commercial juggenauts (You >> << Bose >> <<GM) cannot stand. We love our phones, we love our cars, and it goes without saying that we need to rock out BIG TIME with our phone in our cars.
I love you with all my heart, Apple, and that is why I implore you: fix this fast for me and the millions who own GM cars who have not yet noticed this update falt yet... but will.
And to all you good people looking for answers and asking good questions, I ask you to chime in here for Apple to do this quick tweak to 5.1.1; so we can have our cake and eat it too, just the way we like it.
On the iPhone when plugged into the USB check the
music app. It may be defaulting to Bluetooth playback
and you need to manually select the dock connector
interface.
This is what happens on my Microsoft Sync system.
Phone functions are done via Bluetooth. So, if I start
the car up with Bluetooth on, the phone pairs but defaults
to Bluetooth audio (Sync) for the music. I need to select
the music app on the phone and select dock connector
playback.
Your issue may be similar, it may not. Worth a try anyway.
Similar Messages
-
Can iPhone remote start app be connected to general motors factory remote start
can iPhone remote start app be connected to general motors factory remote start
You can with onstar.
http://www.ehow.com/how_7686640_activate-remote-starter-cell-phone.html -
I am trying to update to ios5 via software updates but the general tab does not offer it. I am using an ipad2. Help!
Here you go:
iOS 4: Updating your device to iOS 5 or later
Summary: Connect your iPad to a computer running the latest version of iTunes and your update options will appear. -
ITunes update bad for my ipod ?!?!
My ipod has been working great for the past 2 years, well, I power up with the wall plug and haven't updated any of my itunes or ipod software for probably 8 months. I updated my itunes to the recent version and then reset and updated my ipod. Now I can't put music on it with out getting an error about reading or writing files from the disk. Heres what I know:
-I can reset the ipod without any issues.
-I can add contacts to the ipod without any issues.
-when I try to add songs through itunes it's very slow and after 3 songs gives me an error and quites. I can add songs like this 3 at a time by un-mounting and mounting the ipod.
-I can't add songs to the ipod through winamp, realplayer, and windows media player won't even recognize that it's plugged in (even though it shows up in MyComputer)
-The songs that are added slowly are Mp3's imported from older versions of itunes, Wav files generally don't work, although I have some sound effects that are under 5 seconds long and they sync to the ipod fine.
then I installed ipod linux to see if a different format would help at all.
So I don't think it has anything to do with my ipod's capability to read and write to the disk, and its not that old. It's a 4th generation click wheel thats around 2 years old.
any ideas?
do I really have to send this in?
Windows XP ProI've had the same problem! My $400 Kenwood kdc-x993 receiver is now worthless! I just bought it in June, but after installing the iPhone update it no longer recognizes the iPhone (older iPods still work).
-
What does the iOS 5.1.1 update do for the Iphone 4 users?
I installed the new update but It hasnt seemed to make any difference, It seems like the only differences are for the Iphone 4S.... What about the people that have the iphone 4, Any difference?
http://support.apple.com/kb/DL1521
-
Ios 7.0.3 update problems for iphone 5c
Could anyone be of any help? This morning ive just recently update both my ipad3 & iphone5c to he new Ios update, the ipad worked straight away but the iphone seems to be stuck on the apple start screen, tried to reboot it off itunes, could anyone help please?
Put the device in DFU mode and restore it.
-
Samsung Printer Firmware update information for iOS8 AirPrint compatibility issue
It has been noticed that there is a compatibility issues on some of the Samsung network printers while printing from iOS8 devices using AirPrint.
In order to resolve this compatibility issue with iOS8, new firmware for printer has been released.
Issue Case:
Printing using AirPrint from iPhone or iPad running Apple iOS 8.0 or later.
- Devices running version prior to iOS 8.0 or Mac OS X have no issues.
Details about affected printers and their fixed firmware versions.
Printers
Version with issue fixed
Samsung CLX-3300 Series
3.00.02.13 or later
Samsung C460 Series
3.00.02.13 or later
Samsung C470 Series
3.00.02.14 or later
Samsung M2020 Series
3.00.01.11 or later
Samsung M2070 Series
3.00.01.20 or later
Samsung M262x 282x Series
3.00.01.25 or later
Samsung M267x 287x Series
3.00.01.27 or later
Samsung SCX-3400 Series
3.00.02.05 or later
Please update your printer with the latest firmware as mentioned in the table above.
To update the firmware kindly follow the procedure mentioned below.
Search for your printer model on the link below
http://www.samsung.com/us/support/supportMain.do
Download the firmware.
Run the downloaded file and follow the instruction provided on the installation screen.
PS. During firmware update do not power off or unplug power cord of your printer. Doing so may make your printer unusable.
Moreover if in case non-compliant toner is used, it may cause error after firmware is updated.
We apologize for any inconvenience caused. We will try our best to provide best service and customer experience.
Thank you,
Samsung AirPrint supportDoesn't work .
-
Possible update solution for some Jelly Bean issues on Razr Maxx
I bought a Razr Maxx used two weeks ago and wanted to a post a possible solution to the broken Jelly Bean update. My Razr Maxx (practically new) was slow, lagged, and gave me about 10 hours of battery life. Also, my Wi-Fi was horrible just 10 feet from the wireless router and it ran hot.
Before I chucked it for a used S3 I decided to do what others had done. Keep in mind, the phone had been previously factory reset after the JB update had been OTA'ed to the unit a few months ago. It was put in a drawer as the person bought a new phone.
So to be clear: It had gone through a factory reset but without clearing internal memory and had serious issues. I had cleared the Dalvik cache but it didn't help. Here's what fixed my phone:
I did a battery recalibration. This can be done by running the phone down to zero. Shutting it off and charging it overnight. This may have to be performed twice.
Backed up my files, removed the mSD card and from the OS, erased the internal storage. I also went into the Settings / Privacy and set Automatic Restore to off.
I cleared the Dalvik Cache again.
http://www.droidforums.net/forum/droid-razr-maxx/232462-how-wipe-cache-without-doing-factory-reset.html
I booted into safe mode.
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=50079
From the OS within safe mode, I performed a factory reset and had it clear the internal storage again.
Started the setup process.
Cleared Dalvik Cache again.
The result is a smooth "buttery" feel (well, as smooth as this platform can offer) no massive lagging like before where the phone would just lock up for five seconds, no over heating, WiFi is seemingly normal and battery life is Maxx instead of Min. To give you an idea, the phone had been on light use and on for maybe 13 on battery when I did the reset. I did the hard reset from a 65% battery and reinstalled all the apps over WiFi and reconfigured. At 2:30 a.m. it was at 1 percent so I set the screen to 100% brightness and played a video until it died about 3 a.m. Basically the screen was on and the phone being used from around 9 p.m. until 3 a.m. after coming off the charger at 8 a.m. the previous morning.
Will this work for you? I don't know but I know the Jelly Bean in place upgrade on this phone is pretty flaky from the complaints.
If your phone has been turned into a pile of junk by the update, you have nothing left to lose unless you're just using it as a bargaining chit to get a new phone from VZW.
Good luck to anyone who tries it.
If you are trying to diagnose battery issues, I recommend GSAM.>> Duplicate post removed for cross-posting violations per the Verizon Wireless Terms of Service
See After latest system update, text messages don't always "send." for original message <<
Message was edited by: Verizon Moderator -
Why I can't update my iPad to the iOS 7.0 when I go to general there's no section for update.please help
If you have an iPad 1G you cannot run iOS 7. If you are currently using iOS 4.x.x then you cannot upgrade OTA. Instead do this:
Give this a try:
Download Apple – iTunes 11.1. Connect your device to your computer and open iTunes. Select your device under the Devices heading in the iTunes' sidebar. Click on the Summary tab in iTunes' main window. Click on the Update button. -
My ipod touch 4g doesn't show option for ios update in setting-general page. Can i update it via itunes by connecting it to computer?
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode ue one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I can't update my iPad to iso 5 please help. When I go to settings and then to general it doesn't have an update button for "check for updates". Thanks
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
Getting an error message of unable to
check for software update when trying to update to
ios 8.0.2. Can someone help ??Howdy there otss1979,
It sounds like you are unable to download the iOS 8.0.2 update either, over the air, or using iTunes. If you are updating the software on your phone in Settings > General > software update I would recommend starting with this article:
Resolve issues with an over-the-air iOS update
If you are using iTunes, I would use this article instead:
Resolve iOS update and restore errors in iTunes
If you are getting a specific error number, the following article will help you get that resolved:
Resolve iOS update and restore errors
If this does not resolve the issue, could you please write the error message you are getting word for word for me?
Thank you for using Apple Support Communities.
All the best,
Sterling -
I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?
You likely have a 2G iPod and those can go higher than 4.2.1
A 3G can go to 5.1.1
IA 4G, with cameras can go to iOS 6.1.6.
The 5G, also with cameras can go to iOS 8
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
- A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
- A 3G to 5.1.1 Requires iTunes version 10.5 or later
- A 4G to 6.1.6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
- A 5G to iOS 8 Requires iTunes 11.4 or later if you update via iTunes
Identifying iPod models -
I don't have the software updates in my general settings so how do I get the updates to use instagram, Facebook etc? Any help appreciated
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
is there any solution for wifi & bluetooth (gone grey), not working in 4s post IOS 7.0.4 update?? pl require a solution badly !!!
If they are grey then the WIFI card has gone bad at this point, service would be needed
Maybe you are looking for
-
The .jpg monochrome images are of slightly different sizes. Is there a way round this or should i use a different file format ? Attachments: Read_multiple_IMAQ_Image_and_other_data_from_file_and_loop_through.vi 88 KB
-
Adobe Air Mobile User Agent Issue.
Hi, We are working on the adobe air applications to handle multiple instance of mobile user agents. While doing so we observed that when a user agent belonging to android/ios/windows/ mobiles web page objects/ui for mobile website is not loading as i
-
Page is here: Download CS3 products
-
Joining two queries with Visual Composer
Hallo, I was working with visual composer to join two queries with the distinct operator. But on my table view, when i linked it with the distinct operator, i get only the key element customer (customer, customer_ext_key, customer_key). These are the
-
Hi all! I'd like to know what kind of data Oracle database stores when I insert a NaN value. For example: Row myRow = viewObject.createRow(); myRow.setAttribute("NumberField1", new oracle.jbo.domain.Number(Double.NaN)); vo.insertRow(); viewObject.ins