IOS 8.0.2 Speakerphone Not Working

I was running IOS 8 on my iPhone 5 without issue. However, after updating to IOS 8.0.2 the speakerphone stopped working.
1. Earbuds work, holding it up to my ear during a phone call with the speaker turned off works.
2. When speaker is selected during a phone call no sound comes out of the phone speaker.
3. When playing a song from iTunes no sound is produced from the speaker whether it is held up to my ear or held away only earbuds work with iTunes
4. Siri works but does not produce any sound output except through earbuds
Everything worked fine until I updated to 8.0.2. I've Restored the phone 3 times while directly connected to my Mac using iTunes 14.4.
I really wish I could downgrade to IOS 7. I have 8 other devices I've bought for family members and have had to advise them not to upgrade until these issues are fixed.
If there are any suggestions, other than restoring the phone which had already been done a number of times, I'd be happy to entertain them.

Update to my original post:
I've tried the following without success:
1. Erase the phone and restore from my iCloud backup
2. Erase the phone and set up as a new phone
3. Turn on Bluetooth, Turn off Bluetooth
4. Plug in earphones and leave in for several minutes then unplug
5. Press the lower right corner of the phone for about 20 seconds in case a contact was loose
Nothing worked so far in regard to getting sound out of the speaker with the momentary exception documented below.
When using bluetooth with Google Glass I noticed on a phone call that the Bluetooth would cut out and sound would momentarily come out of the phone speaker then bluetooth would reconnect and sound would once again come out of the earpiece.
Once again this did not occur until the IOS 8.0.2 update.
iPhone 5 Model A1428

Similar Messages

  • HT4972 My ipad 1 is stuck on IOS 4 as the IOS 5 update instructions do not work. When I use itunes update the software looks for an update file and the apple site doesn't have one!

    My ipad 1 is stuck on IOS 4 as these IOS 5 update instructions do not work. When I use itunes update the software looks for an IOS 5 software update file and the apple site doesn't seem have one anywhere!

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!

    My iPhone crashing after latest IOS Update. Screen is not working anymore. I cannot use buttons, the screen is freezing up.Only thing I am able, is to 'restart' the phone. Now it does it after 5 minutes itself! Already removed en reset phone, no success!
    Can anyone help me?

    Hi there Cinthia88,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W.

  • Iphone 4s Running Ios(7.1) Camera Focus Not Working Like Text On book It Showed Blurey Text & My Friend Also Same Modle His Camera Focus Perfectly..Is Is Possible To Fix It...Thnx Every 1

    Iphone 4s Running Ios(7.1) Camera Focus Not Working Like Text On book It Showed Blurey Text & My Friend Also Same Modle His Camera Focus Perfectly..Is Is Possible To Fix It...Thnx Every 1

    Hello SajidChaudhary,
    Thanks for using Apple Support Communities.
    For more information, take a look at:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Have a nice day,
    Mario

  • Since I have updated IOS 6 my mail does not work, it keeps telling me my user name and password is incorrect.

    Since I have updated my iPad to iOS 6 my mail will not work, so I deleted my account and added a
    New, now it says my username and password is incorrect.  But my username and password are correct.
    Does anybody have a solution?

    May be something here.
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • I am using iPhone 4S lock came from Japan. From beginning, it is IOS 5.1.1 but now i have updated to IOS 7 and it is not working anymore now. Can you tell me what i have to do now?

    I am using iPhone 4S lock came from Japan. From beginning, it is IOS 5.1.1 but now i have updated to IOS 7 and it is not working anymore now. Can you tell me what i have to do now?

    No Japanese carrier provides unlocking services. Therefore, your phone must have been hacked to unlock it. That hack was removed when you updated the software. You need to be a legitimately unlocked phone.
    Best of luck.

  • I upgraded my new ipad with iOS 6 but siri is not working?

    I upgraded my new ipad with iOS 6 but siri is not working?

    Enable Siri
    http://www.todaysiphone.com/2012/09/ios-6-overview-siri-for-ipad-3/

  • Help with Xcode 3.2.6 with ios sdk 4.3: will not work...

    So I recenty upgraded my Mac to OS X Snow Leopard (10.6.8) and the xcode that came with it would not work effectively. I just downloaded xcode 3.2.6 with ios sdk 4.3 from Apple and installed them (after having to change the date to 2011). Xcode worked but opening the interface builder resulted in a blank window opening, not the actual interface builder. So then I tried to reinstall the .dmg file of xcode and ios sdk, which was again successful, but when I click on any of the applications it installs to open them I get an error. This is what happens when trying to open xcode:
    Process:         Xcode [4609]
    Path:            /Users/myname/Desktop/Xcode.app/Contents/MacOS/Xcode
    Identifier:      com.apple.Xcode
    Version:         ??? (???)
    Build Info:      DevToolsIDE-18070000~38
    Code Type:       X86 (Native)
    Parent Process:  launchd [92]
    Date/Time:       2012-07-21 23:18:17.358 -0400
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          3537 sec
    Crashes Since Last Report:           13
    Per-App Crashes Since Last Report:   13
    Anonymous UUID:                      F17937FB-B272-4B47-811F-333D66AB2B3B
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @rpath/DevToolsFoundation.framework/Versions/A/DevToolsFoundation
      Referenced from: /Users/myname/Desktop/Xcode.app/Contents/MacOS/Xcode
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4163b  dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
    Model: MacBook1,1, BootROM MB11.0061.B03, 2 processors, Intel Core Duo, 1.83 GHz, 1 GB, SMC 1.4f12
    Graphics: Intel GMA 950, GMA 950, Built-In, spdisplays_integrated_vram
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x86), Atheros 5424: 2.1.14.6
    Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: FUJITSU MHY2120BH, 111.79 GB
    Parallel ATA Device: MATSHITACD-RW  CW-8221
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8501, 0xfd400000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0217, 0x1d200000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8240, 0x5d200000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8205, 0x7d100000 / 2
    Can anyone please help me? Ps, I've changed the directory location to "myname" for security reasons;p so that is not the problem

    The error message is telling you that the linker is looking for the Xcode executable on your desktop and can't find it. Where did you install Xcode? The default location is in /Developer.
    It sounds like you have an outdated alias to Xcode on your desktop. Can you launch Xcode if you navigate to Xcode in the Finder and launch it from there?

  • My ipod touch 3g with ios 5.0.1 does not work with the player's car

    ios 5.0.1 update from my ipod touch 3g does not work with various audio players Car pionerr with previous updates had not had problems like I can solve this problem???
    thanks

    I have tried everything and nothing that happened when you upgrade to ios 5.0.1, I want to know if anyone else has had this problem

  • Upgrading my Iphone 5 to IOS 7 Ear Speaker is not working, please help us

    Iphone 5 Ear Speaker is not working after upgrading it to IOS 7

    I have the same problem. Before, when i can't hear on a calla, i was opening tango and making a call with tango. After this call, it was working with iphone call. But now, ear speaker does not work at all. Please help us apple!

  • I just updated to 6.0 ios and the passbook does not work.

    I just updated to version ios 6.0 and the passbook app does not work.
    Any ideas, instructions, etc, on how to use this app?
    Please advise.
    Thanks,
    Ed

    To actually use the app you'll need to download passbook compatible apps such as target, fandango, ticket master, American Airlines (not a lot of apps are compatible yet).
    To add tickets to passbook you need to add them through the main app. So if you bought a ticket through ticket master you need to go to the ticket master app, locate the ticket and add to passbook that way.

  • BB Pearl 8120 - speakerphone not working

    Hello
    I wonder if anyone can help me. My speakerphone is not working so I can not hear any incoming calls. My profiles are set to Loud. When I listen to ring tones I have to switch to handset otherwise I can't hear them. And if I press period during a call everything goes mute. Any idea? My service provider just told me I have to speak to BlackBerry but I can't even see a phone number to call. I only bought my phone in July. Any ideas?
    Thanks
    Nools

    Hmmm. What if you try and change to a different profile? So if Loud is the active profile, try changing to Normal and see if that makes a difference
    Also this has never worked, or just stopped working?
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Sound / Speakerphone Not Working

    I have a new Pearl Flip 8230.  All of a sudden the sound/tones/speakerphone does not work.  I have gone through all the settings and can't seem to see what changed.  I can hear everything if I activate handset but when I activate speakerphone... I get nothing.  I'm sure it is something simple... I just can't see it.
    I have installed the newest version of Desktop Manager as well and wiped the unit and updated the OS to latest version.  I have also removed the battery.
    Any suggestions would be greatly appreciated.

    Sounds like a hardware issue, is it still under warranty?
    If someone helped you give them kudos. Research all info!

  • IOS 8.3 : Touch ID not working in App Store

    Hi All,
    After updating my iPad to iOS 8.3, Touch ID is not working in App Store.
    Has any one else noticed the same....? Any workaroun/fixes?
    P.S. Touch ID is enables for iTunes & App Store in settings.
    Regards,
    Srireddy

    Touch ID for App Store is working now...
    Looks like it was a server fix...

  • IMessage iOS 8 "Leave group Conversation" not working

    I've been trying to use the "Leave group Conversation" feature of the "Details" page of iMessage in iOS 8, and I cannot get it to work. I've reset my network settings, logged in and out of iCloud, and restarted the phone. No luck.
    Is anyone else having the same problem?
    thanks,
    J.

    I read that everyone in the group messaging has to have iMessaging and their phone has to be updated to iSO 8. Oh it has to be 4 or more people in the group. Which really does not work for me because everyone in my contacts does not have an iPhone!
    There are a few things to note with this feature however, leaving a conversation in Messages only works when all of those in the message thread are using iMessage – if it’s a group SMS, say there’s an Android user in the thread as well, you’re out of luck and can’t leave the chat. Keep that in mind if the texts keep popping up.

Maybe you are looking for

  • Where is the inspector window in the new pages 5.0?

    I am having a serious problem trying to manage this new version of Pages. Something that I simply loved in the old version was the Inspector Window that just vanished. How can I have it back or how can I return to the old version? Is that possible?

  • HT4623 how do i update from ios 4 to ios 6 without using itunes?

    i have recently got a iphone 4 but is still on the ios version ios 4.3.3 and need to update it badly! however the softwear update option is not in my settings? help!!

  • Boot camp not recognize keyboard and mouse when installing windows 7 pro 64 bit

    Hi, I have some issue when installing windows 7 pro 64 bit using boot camp. after done partitioning the windows drive and when boot to windows installation process, i've got stuck in the first screen when choosing the language. it seems that the keyb

  • Tv picture streached

    hi i live in southern cali. and have 4 channels that are streached 2,5,11,13 anyone heard what verizon is going to do to fix this and when

  • Choosing language for Adobe reader

    I have indicated my operating system and chosen English as the language.  Nevertheless I get French.  I live in a French speaking area but, as we know, French is a 19th century language and totally useless today.  I need English but the system refuse