IOS 8.3 data issues

There is no doubt in my mind that there is a data issue with iOS 8.3 and Verizon. Since I installed the update a week ago, my phone has gone through over 4.6 gb of data (prior to installing the update, I had used .7 gb for the prior 3 weeks before that). I have never gone over 2 gb of data on my phone for any period before that for years. This was verified by downloading the daily data usage from the Verizon website.
I suspect that this is whenever I leave my home. I left the house for 10 minutes today and went through approximately 100mb of data (i had reset the cellular data usage before I left the house). I have access through an exchange server through my work but this is so beyond excessive at this point. I have already doubled my data usage for this month and increased my plan to minimize overages and i've already maxed that out. I'm so beyond frustrated at this point and would love to get back to the prior version but i'm weary of bricking my phone that I use for work. I've tried rebooting several times, reseting from an older backup, etc.

I had a similar problem over a year ago- blowing through cellular data (even in middle of night).
The only fix was to backup the phone (iTunes or icloud) and then do a full reset/erase all content and data - basically a factory reset
Then restore the backup.
Nothing else worked for me.

Similar Messages

Just updated to IOS 7 and two issues: First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

Just updated to IOS 7 and two issues:
First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services". I'm not sure what this really means...
The second issue is when I try to select "Manually Manage Music"
The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC". Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
So... I don't want to do that, but I do what to be able to Manage my music. I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
Anyone have any ideas?

I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

Data Issues running on iOS 5 iPhone 4

Unfortunately, I am having data issues running a factory unlocked iPhone 4 on the Rogers Network. This problem has surfaced ever since I have upgraded to iOS 5, any tips would be grateful. Thanks.
Constantly getting the error 'safari could not open the page because the server stopped responding' in good coverage areas in dowtown Toronto and St. Catharines.
Not to sure if this is a software error, or the network itself.

Make sure that iOS 5 was successfully installed: go to Settings > General > About > Software Version.
If you do have iOS 5, you don't see this?

TS4002 iOS 6.0.1 issues

i completely lost access to mail after installing iOS 6.0.1. It won't even open now.

So to confirm, you have done the following?
1- Hard Reset device.
2- Restarted device.
3- Reset Network Settings.
4- Reset All Settings
5- Restored as New and then trialed issues without having ANY person data on the device.
If you HAVE done all those steps, then have device replaced.
If you have NOT done all those steps, do them, then let us know what happens when they have been done, possibly in a less pretentious and ranting way, realising that a) we are fellow users, we have no control over the situation, so complaining to us does nothing to help you, and b) Dropping game titles and using the FAR too used "Steve Jobs must be..." line does not give you the appearance of intelligence, but someone who's phone doesn't do what they want it to do, and thinks they're the center of the universe because of it.
We realise that there are thousands of results when you search "iOS 6.0.1 issues" in google, but what YOU have to realise is that the results will include duplicate results within single threads, are related to multiple different devices, and in some times use a VERY loose search terms (you may find results like "What issues do you think will be in iOS 6.0.1" as a forum thread) because you have made a broad search.

How to fix data issues

how do i get my 4G and lte working
im in a area where there is lte and 4G

Hi iuseappleproducts,
Thanks for the question. I understand you are having issues with the data connection on your iPhone 5s. The following article may provide a resolution:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
Follow the instructions below for assistance with troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
1. Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
2. Restart your iPhone.
3. Ensure that your software is up to date:
          - Check for a Carrier Settings Update. Tap Settings > General > About.
          - Check for an iOS Software Update. Tap Settings > General > Software Update. Note: Some updates may require a Wi-Fi connection.
4. Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
5. If your SIM card has SIM PIN enabled, try toggling it off: Tap Settings > Phone > SIM PIN.
6. Try another location. If a different location works, but the original location still does not, contact your carrier to report the issue.
7. Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
8. Restore the iPhone as new.
9. Contact your carrier to:
          - Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
          - Verify that there are no account-related blocks.
          - Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
Thanks,
Matt M.

IOS 6.0.1 issues

I am having problems with wifi and ios 6.0.1.
Before the update had problems with staying connected to the home wifi and had to type in password regularly. Updaed to IOS 6.0.1 and i dont have to type in password yippee!
The problem I am having now is the network is so sssslllloooowwwwwww. We have 3 iphones in the house my old 3gs (gave to daughter) my 4S and my wifes iphone5. The 3gs and iphone5 no problems with internet my 4S is a waste of time. The phone as already been replaced by Apple a couple of weeks ago.
Can someone point me in the right direction as to settings on the phone to make it work?
As anyone resolved the network issues?
I cant go to another phone although right now I feel like abandoning iPhone completely and going to Nokia.
Adrian

So to confirm, you have done the following?
1- Hard Reset device.
2- Restarted device.
3- Reset Network Settings.
4- Reset All Settings
5- Restored as New and then trialed issues without having ANY person data on the device.
If you HAVE done all those steps, then have device replaced.
If you have NOT done all those steps, do them, then let us know what happens when they have been done, possibly in a less pretentious and ranting way, realising that a) we are fellow users, we have no control over the situation, so complaining to us does nothing to help you, and b) Dropping game titles and using the FAR too used "Steve Jobs must be..." line does not give you the appearance of intelligence, but someone who's phone doesn't do what they want it to do, and thinks they're the center of the universe because of it.
We realise that there are thousands of results when you search "iOS 6.0.1 issues" in google, but what YOU have to realise is that the results will include duplicate results within single threads, are related to multiple different devices, and in some times use a VERY loose search terms (you may find results like "What issues do you think will be in iOS 6.0.1" as a forum thread) because you have made a broad search.

IOS 8.1+ Performance Issue

Hello,
I encountered a serious performance bug in Adobe Air iOS application on devices running iOS 8.1 or later. Approximately in 1-2 minutes fps drops to 7 or lower without interacting with the app. This is very noticeable in the app. The app looks like frozen for about 0.5 seconds. The bug doesn't appear on every session.
Devices tested: iPad Mini iOS 8.1.1, iPhone 6 iOS 8.2. iPod Touch 4 iOS 6 is working correctly.
Air SDK versions: 15 and 17 tested.
I can track the bug using Adobe Scout. There is a noticeable spike on frame time 1.16. Framerate drops to 7.0. The App spends much time on function Runtime overhead. Sometimes the top activity is Running AS3 attached to frame or Waiting For Next Frame instead of Runtime overhead.
The bug can be reproduced on an empty application having a one bitmap on stage. Open the app and wait for two minutes and the bug should appear. If not, just close and relaunch the app.
Bugbase link: Bug#3965160 - iOS 8.1+ Performance Issue
Miska Savela

Hi
Id already activated Messages and entered the 6 digit code I was presented with into my iPhone. I can receive txt messages from non iOS users on my iMac and can reply to those messages.
I just can't send a new message from scratch to a non iOS user :-s
Thanks
Baz

Data Issue

Hi All ..
           We are facing one data issue DSO. One record is worngly loaded with some project iD ( Ex record is having ID GE1234 insted of having LE4423) remaining details are same . we are loading the data furtherly to master data table from the DSO. if i try for reporting for project id LE4423 ,information not avilable because it is heaving wrong ID,it is key also.But in the Source system (CFG) side Data is correct with ID LE4423.
         In update rule we are following one to one mapping for all infoobjects.My requirement is i need to have in my DSo LE4423 . I need to overwrite the record id GE1234 with LE4423 without affecting other fields in the record.
        Shall i load till PSA with the ID LE4423 ..then if load this single record to DSO will overwrite the GE1234 by choosing other field as key field. but we are following one to one mapping in update rule.
Please help me on this. i need to hev a correct id for record.
Thanks ,
Prem.

You can use selective deletion to delete the record with Project ID = GE1234
Load the data till PSA
Load the data to DSO using selection Project ID = LE4423 in DTP from PSA.
check in further data targets also for mismatch of data
Hope it helps,
Naveen Vytla
Edited by: Naveen Vytla on Nov 18, 2008 10:49 AM

Custom report -Mb51 -EBELN,AUFNR,KDAUF & KUNNR -Data issues

Hi,
This custom report is related to material document list (MB51).
I was trying to retrieve Purchase Order(EBELN),Order number(AUFNR),Sales order(KDAUF) & Ship-to-party( KUNNR) from MSEG & MKPF.
Unfortunately
It looks like for Sales Orders, it picks up the Customer Number but no Order Number. For STOs, it looks like it picks up the STO # but no Customer #.
How to over come this?
FYI..I also tried adding fields to standard report(MB51) and it is also doing the same manner .
Am I pulling it from Wrong tables? or is it related to DATA issues?
Regards
Praveen
Message was edited by:
PRAVEEN s

Hi,
This custom report is related to material document list (MB51).
I was trying to retrieve Purchase Order(EBELN),Order number(AUFNR),Sales order(KDAUF) & Ship-to-party( KUNNR) from MSEG & MKPF.
Unfortunately
It looks like for Sales Orders, it picks up the Customer Number but no Order Number. For STOs, it looks like it picks up the STO # but no Customer #.
How to over come this?
FYI..I also tried adding fields to standard report(MB51) and it is also doing the same manner .
Am I pulling it from Wrong tables? or is it related to DATA issues?
Regards
Praveen
Message was edited by:
PRAVEEN s

Consistent Data Issues Even After Replacement

I don't know whether to blame the phone or the ice cream sandwich update for all the problems I have been having with my RAZR. When I first got it six months ago it was great and I loved it now after the ice cream sandwich update I dont really like it anymore. I never had any sort of issues while using it on gingerbread. Today, I have seen my phone switch constantly between 3g and 4g more times than I can count over the course of half an hour. I couldn't even get a consistent signal to watch a 3 minute youtube clip.
First off, I updated it to ICS but first wiped the phone clean including cache, etc. So it would have basically been a clean install. Now, I have certain issues. The 4g and 3g switch is terrible. On the street and in my own house I have had the same thing happen. In my house I get anywhere from 3-5 bars of 4g but it still switches over to 4 bars of 3g. I have even seen it switch from 4g to 3g when I had full bars. I have already replaced the sim cards, but I am still having these issues. It's actually happening on all 4 of my RAZRs on my family plan. I have gone through the network resets where I pull out the sim card and for 30 seconds, insert it, power on the phone, etc. I went through all 4 of them with the Rep over the phone. I have also had several instances where I did not have data but signal bars and then I didn't have absolutely anything at all. I live in a "major" city metro area, Boston, and I can't believe I am having these problems.
At first I would have gone off and blamed Verizon, but it is definitely not Verizon, it is our phones that are terrible. I can confirm this because my brother uses an ipad (4g Verizon) on a separate account and he consistently maintains 4g even though I have seen it go as low as two bars. Yes, I understand the ipad is a different device and may have a different radio, but that is exactly how our phones used to work on gingerbread. I received a replacement device and I am still having the same issues. Also, the headset speaker, not the speaker on the back, or receiver is really tinny during phone calls even with the in call volume down half way. It is really annoying and the little tone that plays after hanging up makes the speaker sound like its about to blow out. I don't know what to do if the RAZR will keep having data issues because this is absolutely ridiculous. I know i'm not entitled to anything but for $310 a month I mean come on, I just want my phone to work properly. As I am typing this now, I have witnessed my phone switch between 4g, 3g, and no signal at least 5 times and of course my brother's iPad on Verizon has kept its 4g signal.

Thanks for all the suggestions, but they just don't work at all guys. I've even tried that restore connectivity app from Motorola, but of course it didn't work. I don't like that I keep having constant switches between 3g,4g, and no signal bars. It's awful thats just what it is. I feel like I got gipped with this update promising better user experience. If the darned thing can't connect to their network, then what is Verizon doing to address these issues? Every time I try to do something "data intensive" (i.e. youtube, facebook, twitter, etc) the data signal just drops and I'm either left with gray bars and no data or no signal bars whatsoever. Also one thing that annoys me to death with this phone is that I have it sitting in my pocket after I lock the screen and I go to pull it out of my otherwise empty pocket. The screen is turned on by itself (I have the clear silicon case on it so the power button shouldn't be pressed by itself and no I don't wear skinny jeans), its got 3g and no bars, and its piping hot.
WHAT IS WRONG WITH THIS PHONE VERIZON???!!!

Master data Issue --- materials have unassigned or # values ...!!

Hello Experts,
I am facing an issue that the Customer Data is missing in a BEx Report.
Data Flow is 2LIS_13_VDITM --> DSO1 --> Merging DSO --> Cube --> Multiprovider --> Bex Report.
Exact issue is Customers in the Bex Report has unassigned to Sales Office, Sales Group, Sales District.
The only reason a customer should show up under u201Cunassignedu201D or u201C#u201D is if itu2019s improperly set up in the system.
customers are assigned with two values. one which has data and the other which has unassigned value.
I wanted to know, how do i check if the matierials are valid to have unassigned Values ?
Checked the Merging DSO and saw that there are actually values assigned values for the affected matierials.
After that checked the Cube data values are displayed except the Master Data values.
I guess..its completely related to Master data. I would like to know how can i resolve this issue.
Please reply me if you face this kind of master data issue in your expeiriance.
Thanks,
SN.

Hi,
Are Sales Office, Sales Group, Sales District are attributes of Customer?
In case they are, then the customers will be unassigned to Sales Office, Sales Group, Sales District in case the data for these attributes is loaded to the customer attributes.
and also check if the customer characteristic is properly assigned in the multiprovider.
Check if it helps.
Regards,
Joe

In IOS 6 my date format was YYYY-MM-DD. When I switched to IOS 7, it changed to MM-DD-YYYY. How do you change it?

In IOS 6 my date format was YYYY-MM-DD, which is ISO 8601 standard used in Canada. When I switched to IOS 7, it changed to MM-DD-YYYY format which is very confusing as all my cameras etc use YYYY-MM-DD. How do you change it, like one can in OSX?

It appears previous versions of IOS would pick up your preferred date format from your OSX Mac. You can modify that to whatever you like.
Now if you select Canadian or American in IOS 7 you get only MM-DD-YYYY. This is wrong for Canada as the preferred date format here is YYYY-MM-DD, just check your birth or expiry dates on your Ontario Drivers License or OHIP Health Card. Or the date field at the bottom left of any Government of Canada website.
The trouble with using other Country codes is you tend to get their currency codes like € or £ and the terms like yesterday and today in their language.

OBIEE 11g .0d date issue

Hi,
I create an initialization block to populate a couple of repository variables.
After saving the RDP the value for the default initializer changes from 2011 to 2011.0d
I have been using several workaround. But I need some permanent fix in rpd itself. Can anyone point to some Oracle Document? Is this issue been resolved in latest release of OBIEE. I am using 11.1.1.6.6.
Workaround Ref : The .0d date issue
Re: OBIEE 11.1.1.6.2 BP1 Repository Variable data type

Have you gone through my suggestions at the below links?
The .0d date issue
Re: OBIEE 11.1.1.6.2 BP1 Repository Variable data type
You have to do it where ever you are using that rep. variable not in the init block.

Verizon mades changes in the coding and now Windows Phone 7 is having data issues!!!

Starting about 3 weeks ago, I stopped receiving text messages and even worse stopped receiving calls yet alone my voicemails. I have changed not one thing to my phone, everything is exactly the way it was before the issues arised. Now I have to trick my phone to receive my data by dialing into my voicemail... And then what do you know, 30 text mesages, 12 voicemails!!!
The voicemails wont even tell you the date or time stamp (the time the voicemail was received). After numerous *228 and talking with level 2 over the holidays, I see a huge article on multiple news sites stating Verizon is having data issues... Dropped calls, loss of data, no signal while all our phone keep showing full bars and 3g. Verizon stated its only happening on there 4gLTE system and not 3G but thats a load of crap.
All one has to do is a google search of loss of text messages or voicemails on Verizon and you will see 100's up to 1000's of users like you and me all experiencing the same issues. And not just with Windows Phone 7, but with there baby Driod and iPhone as well.
What really ****** me off is that Verizon loves to play the blame game or pass the buck game. Hard Reset your phone and that will solve the problem... Yeah Right. If this was our OS and we updated a driver that changed the OS in the background I can see that being the solution. But for the 100's or 1000's of users that go to work daily, check there emails and text daily, and haven't changed one thing on the phone... THIS IS UNACCEPTABLE!!!
Now I read an articile for someone extermely close to Microsoft stating that Verizon turned down Nokia's new 4GLTE phone because they have no faith in the operating system and I have to think that maybe behind the scenes Verizon is trying to force us off Windows Phone 7 platform with data issue behind the scene and try to get us all into the Droid Platform which they make 50% of the cash off the phone just like the iPhone...
This is a joke, and I am really starting to think about going to ATT and getting the HTC Titan or the new Nokia 900. I have already research a 3 party app that will allow you to backup and restore your phone. And just read that Microsoft just put out an ad for backup, restore and cloud backup programmers for this latest feature.
Verizon the games need to stop, Verizon you need to stand behind this Platform, Verizon you need to provide better service for all us 3G users!!!
TheJester77

Starting about 3 weeks ago, I stopped receiving text messages and even worse stopped receiving calls yet alone my voicemails. I have changed not one thing to my phone, everything is exactly the way it was before the issues arised. Now I have to trick my phone to receive my data by dialing into my voicemail... And then what do you know, 30 text mesages, 12 voicemails!!!
The voicemails wont even tell you the date or time stamp (the time the voicemail was received). After numerous *228 and talking with level 2 over the holidays, I see a huge article on multiple news sites stating Verizon is having data issues... Dropped calls, loss of data, no signal while all our phone keep showing full bars and 3g. Verizon stated its only happening on there 4gLTE system and not 3G but thats a load of crap.
All one has to do is a google search of loss of text messages or voicemails on Verizon and you will see 100's up to 1000's of users like you and me all experiencing the same issues. And not just with Windows Phone 7, but with there baby Driod and iPhone as well.
What really ****** me off is that Verizon loves to play the blame game or pass the buck game. Hard Reset your phone and that will solve the problem... Yeah Right. If this was our OS and we updated a driver that changed the OS in the background I can see that being the solution. But for the 100's or 1000's of users that go to work daily, check there emails and text daily, and haven't changed one thing on the phone... THIS IS UNACCEPTABLE!!!
Now I read an articile for someone extermely close to Microsoft stating that Verizon turned down Nokia's new 4GLTE phone because they have no faith in the operating system and I have to think that maybe behind the scenes Verizon is trying to force us off Windows Phone 7 platform with data issue behind the scene and try to get us all into the Droid Platform which they make 50% of the cash off the phone just like the iPhone...
This is a joke, and I am really starting to think about going to ATT and getting the HTC Titan or the new Nokia 900. I have already research a 3 party app that will allow you to backup and restore your phone. And just read that Microsoft just put out an ad for backup, restore and cloud backup programmers for this latest feature.
Verizon the games need to stop, Verizon you need to stand behind this Platform, Verizon you need to provide better service for all us 3G users!!!
TheJester77

Data issue in IDOC

Hi Experts,
I do the following steps to generate IDOC for Passing over payroll data to ADP.
I run the payroll and Run the coombined Payroll export and go to WE05 to chk for idoc.
I have some data issue here. I need the IDOC to Pick 0167 infotype information. For few employees if does generate but for few it does not generate the info in IDOC. Please help me as to how to navigate this problem as iam very new to payroll and as weel as IDOc's.
Thanks
Chowdary

Hello,
Please try your luck with this.
Go to BD87 see the error message why this idoc is not moved. some time retrying will you success.
else also you find the problem in the error message.
thanks

IOS 8.3 data issues

Similar Messages

Maybe you are looking for