IOS RD Client Remote Resources "Failed to Parse RDP Configuration"
I encounter the error below when attempting to connect to Remote Resources. This worked perfectly yesterday but hasn't at all today. I removed and added the RemoteApp entry on the 2008 R2 server but continue to encounter this error. Any help is greatly appreciated.
"Failed to Parse RDP Configuration"
Thanks,
Randal
Hi,
Would you please provide us the log file for check.
Settings -> Send log via email -> Post the log here.
Thanks.
Jeremy Wu
TechNet Community Support
Similar Messages
-
MacOS 8.0.10 RDC doesn't download remote resources RDWEB
Hi there,
We're suffering the same issues as reported in this thead in the serviceside forum
https://social.technet.microsoft.com/Forums/systemcenter/en-US/0a2e47d7-d01b-4435-9817-341e398c260d/remote-resources-doesnt-load-osx-rdp-app-v-809?forum=winserverTS
It does seem (through sniffing) that the Mac will keep hammering the /RDWeb/FeedLogin/WebFeedLogin trying to get to /RDWeb/Feed/Webfeed.aspx
2014-09-20 14:46:39 %MYPUBLICSERVERIP% GET /RDWeb/FeedLogin/WebFeedlogin.aspx ReturnUrl=%2fRDWeb%2ffeed%2fwebfeed.aspx
443 - %MYPUBLICCLIENTIP% Mozilla/5.0 - 401 1 2148074242 31
This doesn't authenticate, we're not able to change the settings suggested.
How can the MacOS client not support NTLMv2 auth (if that is the problem), and the iPad one does? At the very least it should fail after a go or two rather than hammering consistently
ShaunHi Shaun,
Thank you for posting in Windows Server Forum.
Might possible that there is some configuration issue or connection issue from MRD IOS end. Please reinstall-reconfigure and check. Apart kindly collect the log for further research.
Microsoft Remote Desktop>About Microsoft Remote Desktop>Send log via email
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
Still getting preparing your Remote Resources with iOS client v8.1.6
Updated to 8.1.6 but still getting the dreaded 'Preparing your Remote Resources'.
This is a 2008 R2 RDS server and it hasn't connected since v8.1 of the RDClient App. However, I have another customer with another 2008 R2 RDS server and remote resources in the app work perfectly!
I've compared the two servers side by side, made sure every single setting is the same, but still one works and one doesn't. Somebody please help, it's driving me and my customer crazy.Hi Darmesh,
Thanks for the reply. Yes, I can confirm that I am using the full url, if I don't add the rdweb/feed/webfeed.aspx then it doesn't connect at all, only when I use the full url does it get as far as 'preparing your remote resources'.
I've removed the remote resources and re-added multiple times. I also get the same behaviour on both my iPad and iPhone. Numerous employees of the customer have also complained about it not working since the 8.1.0 update on their iOS devices, so it's been
tested on numerous devices, and with every single release since 8.1.0.
Everything else connects to the server fine including the Mac OS app. I also have another customer with a 2008 R2 RDS server and this connects from the iOS app perfectly. I spent hours the other night comparing every setting between the two servers and they
are now set up identically, except one works and one still doesn't!
Chris -
Remote App from Ipad return "Failed to parse authorization Challange"
Hi,
I have set up a Remote App infrastructure on Windows 2012 server , I have publish some apps , I have publish my server on internet opening port 443 and 3389 for RDP with a public rapid SSL wildcard certificate ... everything works on pcs but when I try
to connect with my ipad from external I receive the error:
"Failed to parse authorization Challange"
with the following log:
===== DO NOT DELETE CONTENT BELOW THIS LINE =====
[2014-May-06 12:03:11] RDP (0): Resolved 'apps.mydomain.com' to '195.206.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:03:11] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:03:11] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:03:11] RDP (0): Error message: The gateway failed to connect with the message: 404 Not Found(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-May-06 12:03:11] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-May-06 12:03:11] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:03:11] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-May-06 12:03:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-May-06 12:03:13] RDP (0): client version: 8.0.5.24403 on iPad3,6 (iPhone OS 7.1.1)
[2014-May-06 12:03:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:03:13] RDP (0): Final rdp configuration used: {
activeUsername = "COPAN\\ataglietti";
arcTimeout = 1800;
cacheId = 77310DD3EA18B941;
certificatesUseRedirectName = 1;
configurationVersion = 8;
font = 1;
gatewayId = 01C00DD3EA18B941;
gatewayMode = 2;
host = "SRVAPP.MYDOMAIN";
label = AS400;
loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
mouseMode = "-1";
port = 3389;
remoteProgram = "||AS400";
remoteProgramArguments = "";
remoteProgramRail = 1;
temporary = 1;
type = rdp;
useAlt = 0;
utilityBar = "-1";
webFeedVersion = "Windows 2008 R2 or newer";
connections = (
77310DD3EA18B941,
84F1ABD3EA18B941,
51A54AD4EA18B941,
DF88EED4EA18B941,
9E7D8DD5EA18B941,
E1EB2BD6EA18B941,
CA18C3D6EA18B941
host = "apps.mydomain.com";
id = 01C00DD3EA18B941;
port = 443;
temporary = 1;
type = rdp;
kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:03:13] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:03:13] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:03:13] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:03:13] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:03:13] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:03:13] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:03:13] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:03:13] RDP (0): Not using any proxy
[2014-May-06 12:03:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:03:13] RDP (0): Resolved 'SRVAPP.mydomain' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-May-06 12:03:13] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-May-06 12:03:13] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:03:14] RDP (0): Final rdp configuration used: {
activeUsername = "COPAN\\ataglietti";
arcTimeout = 1800;
cacheId = 77310DD3EA18B941;
certificatesUseRedirectName = 1;
configurationVersion = 8;
font = 1;
gatewayId = 01C00DD3EA18B941;
gatewayMode = 2;
gwAutodetectState = kConnectionGwAutodectedForceGW;
host = "SRVAPP.mydomain";
label = AS400;
loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
mouseMode = "-1";
port = 3389;
remoteProgram = "||AS400";
remoteProgramArguments = "";
remoteProgramRail = 1;
temporary = 1;
type = rdp;
useAlt = 0;
utilityBar = "-1";
webFeedVersion = "Windows 2008 R2 or newer";
connections = (
77310DD3EA18B941,
84F1ABD3EA18B941,
51A54AD4EA18B941,
DF88EED4EA18B941,
9E7D8DD5EA18B941,
E1EB2BD6EA18B941,
CA18C3D6EA18B941
host = "apps.mydomain.com";
id = 01C00DD3EA18B941;
port = 443;
temporary = 1;
type = rdp;
kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:03:14] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:03:14] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:03:14] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:03:14] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:03:14] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:03:14] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:03:14] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:03:14] RDP (0): Not using any proxy
[2014-May-06 12:03:14] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:03:14] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:03:14] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:03:14] RDP (0): HTTP RPC_IN_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:03:14] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:03:14] RDP (0): HTTP RPC_OUT_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:03:14] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:03:16] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:03:16] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:03:16] RDP (0): Error message: The gateway failed to connect with the message: 404 Not Found(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-May-06 12:03:16] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-May-06 12:03:16] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:03:16] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-May-06 12:05:15] RDP (0): Application went into background
[2014-May-06 12:26:21] RDP (0): Application became foreground application
[2014-May-06 12:26:31] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-May-06 12:26:31] RDP (0): client version: 8.0.5.24403 on iPad3,6 (iPhone OS 7.1.1)
[2014-May-06 12:26:31] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:26:31] RDP (0): Final rdp configuration used: {
activeUsername = "COPAN\\ataglietti";
arcTimeout = 1800;
cacheId = 9EB75556F018B941;
certificatesUseRedirectName = 1;
configurationVersion = 8;
font = 1;
gatewayId = 01C00DD3EA18B941;
gatewayMode = 2;
host = "SRVAPP.MYDOMAIN";
label = "CAPA_64bit";
loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
mouseMode = "-1";
port = 3389;
remoteProgram = "||CAPA_64bit";
remoteProgramArguments = "";
remoteProgramRail = 1;
temporary = 1;
type = rdp;
useAlt = 0;
utilityBar = "-1";
webFeedVersion = "Windows 2008 R2 or newer";
connections = (
77310DD3EA18B941,
84F1ABD3EA18B941,
51A54AD4EA18B941,
DF88EED4EA18B941,
9E7D8DD5EA18B941,
E1EB2BD6EA18B941,
CA18C3D6EA18B941,
5F0AB755F018B941,
9EB75556F018B941,
57CCEC56F018B941
host = "apps.mydomain.com";
id = 01C00DD3EA18B941;
port = 443;
temporary = 1;
type = rdp;
kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:26:31] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:26:31] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:26:31] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:26:31] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:26:31] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:26:31] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:26:31] RDP (0): Not using any proxy
[2014-May-06 12:26:31] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:26:31] RDP (0): Resolved 'SRVAPP.MYDOMAIN' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-May-06 12:26:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-May-06 12:26:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:26:31] RDP (0): Final rdp configuration used: {
activeUsername = "COPAN\\ataglietti";
arcTimeout = 1800;
cacheId = 9EB75556F018B941;
certificatesUseRedirectName = 1;
configurationVersion = 8;
font = 1;
gatewayId = 01C00DD3EA18B941;
gatewayMode = 2;
gwAutodetectState = kConnectionGwAutodectedForceGW;
host = "SRVAPP.MYDOMAIN";
label = "CAPA_64bit";
loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
mouseMode = "-1";
port = 3389;
remoteProgram = "||CAPA_64bit";
remoteProgramArguments = "";
remoteProgramRail = 1;
temporary = 1;
type = rdp;
useAlt = 0;
utilityBar = "-1";
webFeedVersion = "Windows 2008 R2 or newer";
connections = (
77310DD3EA18B941,
84F1ABD3EA18B941,
51A54AD4EA18B941,
DF88EED4EA18B941,
9E7D8DD5EA18B941,
E1EB2BD6EA18B941,
CA18C3D6EA18B941,
5F0AB755F018B941,
9EB75556F018B941,
57CCEC56F018B941,
BFD38857F018B941
host = "apps.mydomain.com";
id = 01C00DD3EA18B941;
port = 443;
temporary = 1;
type = rdp;
kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:26:31] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:26:31] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:26:31] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:26:31] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:26:31] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:26:31] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:26:31] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:26:31] RDP (0): Not using any proxy
[2014-May-06 12:26:31] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:26:31] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:26:31] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:26:33] RDP (0): HTTP RPC_OUT_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:26:33] RDP (0): HTTP RPC_IN_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:26:33] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:26:33] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:26:33] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:26:33] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:26:33] RDP (0): Error message: The gateway failed to connect with the message: 404 Not Found(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-May-06 12:26:33] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-May-06 12:26:33] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:26:33] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-May-06 12:28:37] RDP (0): Application went into background
[2014-May-06 12:34:23] RDP (0): Application became foreground application
[2014-May-06 12:34:32] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-May-06 12:34:32] RDP (0): client version: 8.0.5.24403 on iPad3,6 (iPhone OS 7.1.1)
[2014-May-06 12:34:32] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:34:32] RDP (0): Final rdp configuration used: {
activeUsername = "COPAN\\ataglietti";
arcTimeout = 1800;
cacheId = 31CE4F37F218B941;
certificatesUseRedirectName = 1;
configurationVersion = 8;
font = 1;
gatewayId = 01C00DD3EA18B941;
gatewayMode = 2;
host = "SRVAPP.MYDOMAIN";
label = "DifettiProduzione_64bit";
loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
mouseMode = "-1";
port = 3389;
remoteProgram = "||DifettiProduzione_64bit";
remoteProgramArguments = "";
remoteProgramRail = 1;
temporary = 1;
type = rdp;
useAlt = 0;
utilityBar = "-1";
webFeedVersion = "Windows 2008 R2 or newer";
connections = (
77310DD3EA18B941,
84F1ABD3EA18B941,
51A54AD4EA18B941,
DF88EED4EA18B941,
9E7D8DD5EA18B941,
E1EB2BD6EA18B941,
CA18C3D6EA18B941,
5F0AB755F018B941,
9EB75556F018B941,
57CCEC56F018B941,
BFD38857F018B941,
F6424158F018B941,
66C1EC58F018B941,
83858B59F018B941,
6EA42436F218B941,
1CEEAB36F218B941,
31CE4F37F218B941,
F7B0DF37F218B941,
3D436438F218B941
host = "apps.mydomain.com";
id = 01C00DD3EA18B941;
port = 443;
temporary = 1;
type = rdp;
kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:34:32] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:34:32] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:34:32] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:34:32] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:34:32] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:34:32] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:34:32] RDP (0): Not using any proxy
[2014-May-06 12:34:32] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:34:32] RDP (0): Resolved 'SRVAPP.MYDOMAIN' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-May-06 12:34:32] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-May-06 12:34:32] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:34:32] RDP (0): Final rdp configuration used: {
activeUsername = "COPAN\\ataglietti";
arcTimeout = 1800;
cacheId = 31CE4F37F218B941;
certificatesUseRedirectName = 1;
configurationVersion = 8;
font = 1;
gatewayId = 01C00DD3EA18B941;
gatewayMode = 2;
gwAutodetectState = kConnectionGwAutodectedForceGW;
host = "SRVAPP.MYDOMAIN";
label = "DifettiProduzione_64bit";
loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
mouseMode = "-1";
port = 3389;
remoteProgram = "||DifettiProduzione_64bit";
remoteProgramArguments = "";
remoteProgramRail = 1;
temporary = 1;
type = rdp;
useAlt = 0;
utilityBar = "-1";
webFeedVersion = "Windows 2008 R2 or newer";
connections = (
77310DD3EA18B941,
84F1ABD3EA18B941,
51A54AD4EA18B941,
DF88EED4EA18B941,
9E7D8DD5EA18B941,
E1EB2BD6EA18B941,
CA18C3D6EA18B941,
5F0AB755F018B941,
9EB75556F018B941,
57CCEC56F018B941,
BFD38857F018B941,
F6424158F018B941,
66C1EC58F018B941,
83858B59F018B941,
6EA42436F218B941,
1CEEAB36F218B941,
31CE4F37F218B941,
F7B0DF37F218B941,
3D436438F218B941,
45F0EB38F218B941
host = "apps.mydomain.com";
id = 01C00DD3EA18B941;
port = 443;
temporary = 1;
type = rdp;
kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:34:32] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:34:32] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:34:32] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:34:32] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:34:32] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:34:32] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:34:32] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:34:32] RDP (0): Not using any proxy
[2014-May-06 12:34:32] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:34:32] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:34:32] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:34:35] RDP (0): HTTP RPC_IN_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:34:35] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:34:35] RDP (0): HTTP RPC_OUT_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:34:35] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:34:35] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:34:35] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:34:35] RDP (0): Error message: The gateway failed to connect with the message: 404 Not Found(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-May-06 12:34:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-May-06 12:34:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:34:35] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-May-06 12:35:28] RDP (0): Application went into background
[2014-May-06 12:35:34] RDP (0): Application became foreground application
[2014-May-06 12:35:45] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-May-06 12:35:45] RDP (0): client version: 8.0.5.24403 on iPad3,6 (iPhone OS 7.1.1)
[2014-May-06 12:35:45] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:35:45] RDP (0): Final rdp configuration used: {
activeUsername = "COPAN\\ataglietti";
arcTimeout = 1800;
cacheId = 2C11E07DF218B941;
certificatesUseRedirectName = 1;
configurationVersion = 8;
font = 1;
gatewayId = 8CDC4B79F218B941;
gatewayMode = 2;
host = "SRVAPP.MYDOMAIN";
label = "DifettiProduzione_64bit";
loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
mouseMode = "-1";
port = 3389;
remoteProgram = "||DifettiProduzione_64bit";
remoteProgramArguments = "";
remoteProgramRail = 1;
temporary = 1;
type = rdp;
useAlt = 0;
utilityBar = "-1";
webFeedVersion = "Windows 2008 R2 or newer";
connections = (
30664B79F218B941,
37A6A77CF218B941,
EA3C467DF218B941,
2C11E07DF218B941,
EBE2767EF218B941,
26E3887FF218B941,
06F10D80F218B941,
3EAE9580F218B941
host = "apps.mydomain.com";
id = 8CDC4B79F218B941;
port = 443;
temporary = 1;
type = rdp;
kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:35:45] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:35:45] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:35:45] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:35:45] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:35:45] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:35:45] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:35:45] RDP (0): Not using any proxy
[2014-May-06 12:35:45] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:35:45] RDP (0): Resolved 'SRVAPP.MYDOMAIN' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-May-06 12:35:45] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-May-06 12:35:45] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:35:45] RDP (0): Final rdp configuration used: {
activeUsername = "COPAN\\ataglietti";
arcTimeout = 1800;
cacheId = 2C11E07DF218B941;
certificatesUseRedirectName = 1;
configurationVersion = 8;
font = 1;
gatewayId = 8CDC4B79F218B941;
gatewayMode = 2;
gwAutodetectState = kConnectionGwAutodectedForceGW;
host = "SRVAPP.MYDOMAIN";
label = "DifettiProduzione_64bit";
loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
mouseMode = "-1";
port = 3389;
remoteProgram = "||DifettiProduzione_64bit";
remoteProgramArguments = "";
remoteProgramRail = 1;
temporary = 1;
type = rdp;
useAlt = 0;
utilityBar = "-1";
webFeedVersion = "Windows 2008 R2 or newer";
connections = (
30664B79F218B941,
37A6A77CF218B941,
EA3C467DF218B941,
2C11E07DF218B941,
EBE2767EF218B941,
26E3887FF218B941,
06F10D80F218B941,
3EAE9580F218B941
host = "apps.mydomain.com";
id = 8CDC4B79F218B941;
port = 443;
temporary = 1;
type = rdp;
kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:35:45] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:35:45] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:35:45] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:35:45] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:35:45] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:35:45] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:35:45] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:35:45] RDP (0): Not using any proxy
[2014-May-06 12:35:45] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:35:45] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:35:45] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:35:46] RDP (0): HTTP RPC_IN_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:35:46] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:35:46] RDP (0): HTTP RPC_OUT_DATA connection redirected from https://apps.mydomain.com:443/rpc/rpcproxy.dll?localhost:3388 to https://apps.mydomain.com/RDWeb/rpc/rpcproxy.dll
[2014-May-06 12:35:46] RDP (0): Resolved 'apps.mydomain.com' to '195.z.y.x' using NameResolveMethod_Unknown(0)
[2014-May-06 12:35:46] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:35:46] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 209
User Message : The gateway failed to connect with the message: 404 Not Found
[2014-May-06 12:35:46] RDP (0): Error message: The gateway failed to connect with the message: 404 Not Found(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-May-06 12:35:46] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-May-06 12:35:46] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:35:46] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-May-06 12:37:52] RDP (0): Application went into background
[2014-May-06 12:38:25] RDP (0): Application became foreground application
[2014-May-06 12:38:33] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-May-06 12:38:33] RDP (0): client version: 8.0.5.24403 on iPad3,6 (iPhone OS 7.1.1)
[2014-May-06 12:38:33] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:38:34] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:38:34] RDP (0): Final rdp configuration used: {
activeUsername = "COPAN\\ataglietti";
arcTimeout = 1800;
cacheId = 75AFEF2AF318B941;
certificatesUseRedirectName = 1;
configurationVersion = 8;
font = 1;
gatewayId = 8CDC4B79F218B941;
gatewayMode = 2;
host = "SRVAPP.MYDOMAIN";
label = "DifettiProduzione_64bit";
loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
mouseMode = "-1";
port = 3389;
remoteProgram = "||DifettiProduzione_64bit";
remoteProgramArguments = "";
remoteProgramRail = 1;
temporary = 1;
type = rdp;
useAlt = 0;
utilityBar = "-1";
webFeedVersion = "Windows 2008 R2 or newer";
connections = (
30664B79F218B941,
37A6A77CF218B941,
EA3C467DF218B941,
2C11E07DF218B941,
EBE2767EF218B941,
26E3887FF218B941,
06F10D80F218B941,
3EAE9580F218B941,
7F340829F318B941,
1BBDAE29F318B941,
26A8452AF318B941,
75AFEF2AF318B941
host = "apps.mydomain.com";
id = 8CDC4B79F218B941;
port = 443;
temporary = 1;
type = rdp;
kCFProxyTypeKey = kCFProxyTypeNone;
[2014-May-06 12:38:34] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-May-06 12:38:34] RDP (0): lo0 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-May-06 12:38:34] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2014-May-06 12:38:34] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-May-06 12:38:34] RDP (0): pdp_ip0 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): pdp_ip0 af=2 (AF_INET) addr=109.112.3.43 netmask=255.255.255.255
[2014-May-06 12:38:34] RDP (0): pdp_ip1 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): pdp_ip2 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): pdp_ip3 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): ap1 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): en0 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): en2 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): awdl0 af=18 addr= netmask=
[2014-May-06 12:38:34] RDP (0): --- END INTERFACE LIST ---
[2014-May-06 12:38:34] RDP (0): Not using any proxy
[2014-May-06 12:38:34] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-May-06 12:38:35] RDP (0): Resolved 'SRVAPP.MYDOMAIN' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-May-06 12:38:35] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-May-06 12:38:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-May-06 12:38:35] RDP (0): Final rdp configuration used: {
activeUsername = "COPAN\\ataglietti";
arcTimeout = 1800;
cacheId = 75AFEF2AF318B941;
certificatesUseRedirectName = 1;
configurationVersion = 8;
font = 1;
gatewayId = 8CDC4B79F218B941;
gatewayMode = 2;
gwAutodetectState = kConnectionGwAutodectedForceGW;
host = "SRVAPP.MYDOMAIN";
label = "DifettiProduzione_64bit";
loadBalanceInfo = "tsv://MS Terminal Services Plugin.1.QuickSessionCollection";
mouseMode = "-1";
port = 3389;
remoteProgram = "||DifettiProduzione_64bit";
remoteProgramArguments = "";
remoteProgramRail = 1;
temporary = 1;
type = rdp;
useAlt = 0;
utilityBar = "-1";
webFeedVersion = "Windows 2008 R2 or newer";
THANKS FOR SUGGESTIONHi,
Thank you for posting in Windows Server Forum.
Please check that you have enable RD Web SSO and as you have buy RapidSSL wildcard certificate you need to see that certificate installed with its private key and also need to store the certificate under local computer personal store.
In addition check the group policy whether you added server name in “Allow Delegating Default Credentials” under below path.
Computer Configuration\Administrative Templates\System\Credentials Delegation
Please check below articles for details.
Remote Desktop Web Access single sign-on now easier to enable in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/06/25/remote-desktop-web-access-single-sign-on-now-easier-to-enable-in-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki -
Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"
Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be. -
Portal failed to access remote resource due to network failures
Hi,
We have a portlet that allows users to upload files to a SQL Server database and make it available for other users to access. The portlet code is on our remote servers. Everything works fine in dev environment, but certain files fail in pre-prod and prod within the portal, but work fine when the code is executed outside the portal.
I keep getting this error:
Error - Portal failed to access remote resource due to network failures. Try again later or contact your portal administrator.
What could the problem be?
Thank you for your help.
RadIf the Studio service looks good on the remote server where Studio is installed (check that
the service is started and look in the Studio logs for any warnings or errors), you should
also verify the configuration settings in the Studio remote server object. Is it properly
configured and pointing to the correct remote server?
If so, check the portal servers access to the Studio server via the port specified in the remote
server (default is 11935). You can test this by doing a telnet test on the portal server. In a cmd
prompt (Windows) or on the CLI (Unix), type 'telnet [studioserver] 11935', where "<servername> is
the name of your Studio remote server. The screen should just go blank, meaning that there is
something accepting connections on that port on the given server. (We would hope it's the Studio
app and not another service occupying that port.) If you get "Could not open connection to the host"
or some such similar result, check that the network between the portal and the Studio remote server
is open (ie, make sure there isn't any port blocking or a firewall in place that would hinder the
communication between the two servers). -
Exchange 2010 SP2 Active DAG Node. Cannot cannot to Exchange Admin Console with the following errors and these errors change from time to time ... and some times it works ...
attempt to connect to http://DAGNODE.domain.com/powershell using "kerberos" authentication failed: connecting to remote server failed with the following message: The WinRM Client cannot complete the operation
within the time specified. Check if the machine name is valid and is reachable over the network and firewall exception for windows remote management service is enabled.
thanks,Hi,Philip,
Are you running the DAG on Windows server 2008 R2?If so check the following KB to see if they apply to your issue
http://support.microsoft.com/kb/976839
http://support.microsoft.com/kb/2294243
And you can check if the solutions in these old threads with similar error message do the trick for you.
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/54af902c-d718-4656-8a25-7c150e4b0e81/
http://social.technet.microsoft.com/Forums/en-US/exchangesvradminlegacy/thread/baa1af25-001a-432d-86a0-25c05655e63c/
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. -
Hi,
I've the following environment:
- Sun Solaris
- WL 61 without service pack
- jdk 1.3.1
I wrote a simple Session Bean and make it IIOP enabled.
For the Java-Corba client I use an IDL which describes
the interfaces of the remote and home interface of the
Session Bean.
Everything works fine, that means I get the WL's NameService,
home and the remote object. If I call a method of the remote
object I got the following message:
<Info> <IIOPEndPoint> <failed to parse method name: foundUnkownSubscriber>
I found something in you newsgroup and you said the we should
use SP2. Where can I get this SP2?
Regards
Andre GenserAndy Piper <[email protected]> wrote:
"Andre Genser" <[email protected]> writes:
I've the following environment:
- Sun Solaris
- WL 61 without service pack
- jdk 1.3.1
I wrote a simple Session Bean and make it IIOP enabled.
For the Java-Corba client I use an IDL which describes
the interfaces of the remote and home interface of the
Session Bean.
Everything works fine, that means I get the WL's NameService,
home and the remote object. If I call a method of the remote
object I got the following message:
<Info> <IIOPEndPoint> <failed to parse method name: foundUnkownSubscriber>Are you sure you are spelling correctly? Seems like this should be
foundUnknownSubscriber.
andy
-- Sorry Andy, it was the name but I didn't solved the problem. Now I got the following
exception:
<Apr 16, 2002 8:47:29 AM CEST> <Warning> <Dispatcher> <Error thrown by rmi server:
'weblogic.rmi.cluster.ClusterableServerRef@111 - jvmid: '-5101001595216439928S:10.2.9.70:[8045,8045,9045,9045,8045,9045,-1]:agenser8045:myserver',
oid: '273', implementation: '[BaseEJBObject] home: prototype.CallBackBean_w4a7u3_HomeImpl@29bced''
java.lang.OutOfMemoryError
<<no stack trace available>>
>
<Apr 16, 2002 8:47:29 AM CEST> <Error> <Kernel> <ExecuteRequest failed
java.lang.OutOfMemoryError
<<no stack trace available>>
>
What is wrong in my solution? Here is my simple IDL-File:
module prototype{
exception CallBackException {
interface CallBack {
void foundUnknownSubscriber( in string MSISDN) raises(CallBackException);
interface CallBackFactory {
CallBack create();
Thanks.
Andre -
URGENT: Failed to parse descriptor file
I have a servlet which actually act as an EJB client. The ejb server application
is running on the same server(WL 7.0 SP4). The servlet was working fine when
we were using a policy file which give all permissions to the code. Now as per
customer requirement we changed the policy file to include only the permissions
that we require. It is throwing this exception after this policy file change.
What the code is doing is that using reflection, get the findByPrimaryKey method
and invoke it on the home interface.
The exception is:
java.rmi.RemoteException: cannot unmarshaling return; nested exception is:
java.rmi.UnexpectedException: Failed to parse descriptor file; nested exception
is:
org.xml.sax.SAXException: ResourceEntityResolver: did not resolve entity for
publicId = -//BEA Systems, Inc.//RMI Runtime DTD 1.0//EN with resource name rmi.dtd
What permission I will need to give in the policy file inorder to fix this problem?
Thanks in advance,
DWYou might want to ask this in the security newsgroup.
-
Creating Client Installation Program fails
How do you install Remote Desktop on clients? Creating the client installation program fails every time I try. The error message is Apple unspecific ([translated] There was an error trying to access the required components. Please try again). This happens on the last page of the wizard.
Thanks.This command works far quicker for me IMO:
/System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/ki ckstart -activate -configure -clientopts -setmenuextra -menuextra no
Select your workstations and send the command as root. The above is all on one line. -
Lion Server: iOS 5 clients can't connect to Address Card Server
I have set up shared accounts on the server for Calendar and Address Book (family) sharing. Although I can add and use the Address Book shared account on OS X Lion clients, I can't get this to work on iOS 5 clients (iPhone nor iPad). I keep on getting "CardDAV account verification failed".
Calendar sharing works just fine on both OS X and iOS5 clients
Let me briefly describe my setup and observations:
Server:
Running Lion Server 10.7.2 on Mac Mini (server)
Using SSL connections with keys generated during set-up of the server
Portforwarding in router (ao) for 8008 and 8843 (iCal and Address Book)
Created shared accounts on server for Calendar ("sharedcalendar") and Address Book ("sharedcontacts")
In the DNS server I created services in my primary zone for "_caldavs._tcp." and "_carddavs._tcp." both on port 8443
OS X Client (Calendar)
Created additional CalDAV account in preferences (user "sharedcalendar")
Left the server settings untouched (server path, port "auto" and using SSL but not Kerberos)
Created in "sharedcalendar" different calendars and reminder lists for the family members which each can access from their OS X client
This account is now set-up through Profile Manager (tried this with Address Book as well but didn't make any difference)
iOS 5 Client (Calendar)
Once tested on standalone and got this working I'm now using the Profile Manager to push the definition of the shared account to all clients
Hostname with port 8443 (default)
Left Principal URL blank since it was optional
User "shared calendar" with the appropriate password
Ticked "Use SSL"
OS X client (Address Book)
Created additional CardDAV account in preferences (user "sharedcontacts").
Left the server settings untouched (port 443 using SSL)
iOS 5 client (Address Book)
In the settings add a CardDAV account (server, user "sharedcontacts", password, description).
First error message "Cannot connect Using SSL. Do you want to try setting up the account without SSL?". When I press continue I get the error "CardDAV account verification failed"
If I then save the account details still and edit the account I can access the "advanced settings". When I change to SSL I have tried port 0 (default value), 8443 (the one that's listed in the documentation) and 8843 (which is used by default if you try to set up the
account in Profile Manager). All to no avail, including Profile Manager
Observations:
Lion Server app nicely lists both Calendar and Address Book Server as active (plus Profile Manager, File Server, Web server and Wiki server)
When I access my server home page, Calendar is listed in addition to other services (Mail | Calendar | Change Password | Profile Manager) but not Address Book. Is this normal behaviour? i.e. can't Address Book entries be changed through a web interface?
Address Book on OS X client uses 443 for SSL but does not require me to define port 8443 for secure iCal or Address Book server communications
Lion Server Profile Manager specifies port 8843 as port for SSL communication. I only saw 8443 listed in documentation
The response "can't connect .." or "account verification failed" happens very quick which make me think either the verification doesn't even leave the iPad or there is something wrong in the SSL connection
Since iCal set-up works nicely using the same ports I am puzzled why it doesn't work for Address Book
Your solutions or suggestions how to investigate are most welcome,
ErikThanks for joining the discussion.
Although port 8443 is mosten quoted as correct port for CalDAV and CardDAV, port 8843 can be found both on Apple's website and other places:
see Technical Note 1649 to find port 8443 listed for iCal and port 8843 for Address Book
Mac OS X Lion Server for Dummies (sic) lists port 8843 on pages 236 and 238 but port 8443 in many other places
when you want to push iCal and Address Book information with Profile Manager, Profile Manager lists port 8443 for iCal but port 8843 for Address Book as default:
So I hope you understand I'm somewhat puzzled.
I did get the Address Book working for my Lion desktops with the all the necessary certificates as far as I know, just not for the iOS devices (iPhone and IpPad). iCal sharing from Lion Server works fine on both Lion and iOS devices. -
OSX Remote Desktop and RDGateway Remote Resources
Is it possible or planned to support RDGateway for published Remote Resources, using Microsoft Remote Desktop for OSX?
thanksHi,
I have just confirmed with the product group, RD Gateway is supported for Remote Resources. It does not have dedicated settings for Remote Resources.
Furthermore, the feed server (RDWeb) must be reachable by the client. If a GW is needed then the administrator must have configured the published apps to use one.
More information:
Checklist: Make RemoteApp Programs Available from the Internet
http://technet.microsoft.com/en-us/library/cc772415.aspx
Configure the Remote Desktop Web Access Server to Allow Access from the Internet
http://technet.microsoft.com/en-us/library/cc770330.aspx
Many Obstacles in Publishing RemoteApps to the Internet in Windows Server 2012
http://social.technet.microsoft.com/wiki/contents/articles/22276.many-obstacles-in-publishing-remoteapps-to-the-internet-in-windows-server-2012.aspx
Best Regards.
Jeremy Wu
TechNet Community Support -
How do you use a Gateway with Remote Resources on a Mac (8.0.5)?
I might be missing something obvious, but I have a Gateway configured in the OS X 8.0.5 client, but when connecting to remote resources it does not seem to use it. When you configure a connection to a specific machine there is a drop down for using one of
the preconfigured gateways but not when configuring remote resources. I see no evidence a gateway is being used when I try to connect to a RemoteApp from off site.
Am I missing something?Hi,
Firstly, why do you think that remote resources does not use RD Gateway? Please let us know more details.
Meanwhile, please make sure that the configurations are correct on the RD Gateway server.
Checklist: Make RemoteApp Programs Available from the Internet
http://technet.microsoft.com/en-us/library/cc772415.aspx
Thanks.
Jeremy Wu
TechNet Community Support -
JMSException : Failed to parse descriptor file : npx BasicRuntimeDescriptor
I'm trying to implement my first jms queue using Weblogic and Eclipse and get an error message when I try to create a topic connection.
I have a "Oracle WebLogic Server 12c (12.1.1) at localhost [base_domain]" server running. I run the following code using Debug As >>Java Application.
public static void main(String[] args) throws Exception {
Hashtable<String,String> env = new Hashtable<String,String>();
env.put(Context.INITIAL_CONTEXT_FACTORY, "weblogic.jndi.WLInitialContextFactory");
env.put(Context.PROVIDER_URL, "t3://localhost:7001");
env.put("weblogic.jndi.createIntermediateContexts", "true");
InitialContext ic = new InitialContext(env);
TopicConnectionFactory tconFactory = (TopicConnectionFactory)
PortableRemoteObject.narrow(ic.lookup("weblogic.jms.ConnectionFactory"),
TopicConnectionFactory.class);
TopicConnection tcon = tconFactory.createTopicConnection();
The failure occurs when the last statement about is executed. Thanks in advance for your help.
\====================================================================
Exception in thread "main" weblogic.jms.common.JMSException: [JMSClientExceptions:055053]Error creating connection to the server: java.rmi.MarshalException: failed to marshal connectionCreateRequest(Lweblogic.jms.frontend.FEConnectionCreateRequest;); nested exception is:
java.rmi.UnexpectedException: Failed to parse descriptor file; nested exception is:
java.lang.NullPointerException.
at weblogic.jms.client.JMSConnectionFactory.setupJMSConnection(JMSConnectionFactory.java:258)
at weblogic.jms.client.JMSConnectionFactory.createConnectionInternal(JMSConnectionFactory.java:285)
at weblogic.jms.client.JMSConnectionFactory.createTopicConnection(JMSConnectionFactory.java:184)
at examples.jms.topic.TopicReceive.main(TopicReceive.java:121)
Caused by: java.rmi.MarshalException: failed to marshal connectionCreateRequest(Lweblogic.jms.frontend.FEConnectionCreateRequest;); nested exception is:
java.rmi.UnexpectedException: Failed to parse descriptor file; nested exception is:
java.lang.NullPointerException
at weblogic.rjvm.BasicOutboundRequest.marshalArgs(BasicOutboundRequest.java:92)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:453)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:272)
at weblogic.jms.frontend.FEConnectionFactoryImpl_1211_WLStub.connectionCreateRequest(Unknown Source)
at weblogic.jms.client.JMSConnectionFactory.setupJMSConnection(JMSConnectionFactory.java:224)
... 3 more
Caused by: java.rmi.UnexpectedException: Failed to parse descriptor file; nested exception is:
java.lang.NullPointerException
at weblogic.rmi.internal.DescriptorManager.createRuntimeDescriptor(DescriptorManager.java:114)
at weblogic.rmi.internal.DescriptorManager.getBasicRuntimeDescriptor(DescriptorManager.java:85)
at weblogic.rmi.internal.DescriptorManager.getDescriptor(DescriptorManager.java:51)
at weblogic.rmi.internal.DescriptorManager.getDescriptor(DescriptorManager.java:37)
at weblogic.rmi.internal.OIDManager.makeServerReference(OIDManager.java:194)
at weblogic.rmi.internal.OIDManager.getReplacement(OIDManager.java:175)
at weblogic.rmi.utils.io.RemoteObjectReplacer.replaceSmartStubInfo(RemoteObjectReplacer.java:117)
at weblogic.rmi.utils.io.RemoteObjectReplacer.replaceObject(RemoteObjectReplacer.java:103)
at weblogic.rmi.utils.io.InteropObjectReplacer.replaceObject(InteropObjectReplacer.java:62)
at weblogic.utils.io.ChunkedObjectOutputStream.replaceObject(ChunkedObjectOutputStream.java:39)
at weblogic.utils.io.ChunkedObjectOutputStream$NestedObjectOutputStream.replaceObject(ChunkedObjectOutputStream.java:142)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1140)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:346)
at weblogic.messaging.dispatcher.DispatcherWrapper.writeExternal(DispatcherWrapper.java:156)
at weblogic.jms.frontend.FEConnectionCreateRequest.writeExternal(FEConnectionCreateRequest.java:98)
at java.io.ObjectOutputStream.writeExternalData(ObjectOutputStream.java:1443)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1414)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1174)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:346)
at weblogic.rjvm.MsgAbbrevOutputStream.writeObject(MsgAbbrevOutputStream.java:623)
at weblogic.rjvm.MsgAbbrevOutputStream.writeObjectWL(MsgAbbrevOutputStream.java:614)
at weblogic.rmi.internal.ObjectIO.writeObject(ObjectIO.java:38)
at weblogic.rjvm.BasicOutboundRequest.marshalArgs(BasicOutboundRequest.java:88)
... 7 more
Caused by: java.lang.NullPointerException
at weblogic.rmi.internal.BasicRuntimeDescriptor.createSkeletonClass(BasicRuntimeDescriptor.java:271)
at weblogic.rmi.internal.BasicRuntimeDescriptor.<init>(BasicRuntimeDescriptor.java:157)
at weblogic.rmi.internal.BasicRuntimeDescriptor.<init>(BasicRuntimeDescriptor.java:139)
at weblogic.rmi.internal.DescriptorManager.createRuntimeDescriptor(DescriptorManager.java:106)
... 29 moreI found another thread which indicates explicitly including the JARs in the class path clears up this issue. I tried that and it looks like it is working.
-
WSSERVLET11: failed to parse runtime descriptor
Hi All
Your help will be appriciated.
I have created a simple hello world program.
Interface:
@WebService(name="HelloWorldPort",serviceName="HelloWorld" )
@SOAPBinding(style=SOAPBinding.Style.DOCUMENT,
use=SOAPBinding.Use.LITERAL)
public interface HelloWorld {
@WebMethod(operationName="greet", action="urn:greet")
@WebResult(name="greeting")
Greeting createGreeting(@WebParam(name="person") Person per);
implementation:
@WebService(name="HelloWorldPort",serviceName="HelloWorld" )
@SOAPBinding(style=SOAPBinding.Style.DOCUMENT,
use=SOAPBinding.Use.LITERAL)
public class HelloWorldImpl implements HelloWorld{
@WebMethod(operationName="greet", action="urn:greet")
@WebResult(name="greeting")
public Greeting createGreeting(Person per) {
Greeting grt = new Greeting();
grt.setMessage("Welcome back " + per.getFirstName() + "," +
per.getLastName());
grt.setDateTime(new Date());
return grt;
besides, i have Greeting and Person class defined.
I am using JAXWS RI (https://jax-ws.dev.java.net/jax-ws-20-fcs/) and
tomcat 5.5.25 with eclipse IDE 3.2.0
I am getting the following error while starting the tomcat server.
Below is an entire console log
Sep 13, 2007 4:06:41 PM org.apache.catalina.core.AprLifecycleListener
lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal
performance in production environments was not found on the
java.library.path: C:\Program Files\Java\jre1.5.0_12\bin;.;C:\WINDOWS
\system32;C:\WINDOWS;C:\Program Files\Java\jdk1.5.0_12\jre\bin;C:
\Program Files\PHP\;%AXIS2C_HOME%\lib;C:\j2sdk1.4.2_05\bin;%AXIS2_HOME%
\bin;C:\OraHome9i\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program
Files\Oracle\jre\1.1.8\bin;C:\oracle\ora81\bin;C:\Program Files\Oracle
\jre\1.1.7\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS
\System32\Wbem;C:\Program Files\ATI Technologies\ATI Control Panel;C:
\Program Files\QuickTime\QTSystem\;C:\ant\bin;C:\Program Files
\Subversion\bin;C:\Program Files\Subversion\bin;C:\Program Files
\Microsoft Visual Studio 8\SDK\v2.0\Bin;C:\product
\10.1.3.1\OraBPEL_1\MOBILE\sdk\bin;C:\Program Files\Java
\jdk1.5.0_12\jre\bin;C:\apache-cxf-2.1-incubator-SNAPSHOT\bin;C:\Sun
\jwsdp-2.0\jwsdp-shared\bin;C:\Program Files\PHP\;C:\axis2c-bin-1.0.0-
win32\lib;C:\j2sdk1.4.2_05\bin;C:\axis2-1.2\bin;C:\OraHome9i\bin;C:
\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre
\1.1.8\bin;C:\oracle\ora81\bin;C:\Program Files\Oracle\jre\1.1.7\bin;C:
\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files
\ATI Technologies\ATI Control Panel;C:\Program Files\QuickTime\QTSystem
\;C:\ant\bin;C:\Program Files\Subversion\bin;C:\Program Files
\Subversion\bin;C:\Program Files\Microsoft Visual Studio 8\SDK
\v2.0\Bin;C:\maven-2.0.7\bin
Sep 13, 2007 4:06:41 PM org.apache.coyote.http11.Http11BaseProtocol
init
INFO: Initializing Coyote HTTP/1.1 on http-8080
Sep 13, 2007 4:06:41 PM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 1156 ms
Sep 13, 2007 4:06:41 PM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
Sep 13, 2007 4:06:41 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.25
Sep 13, 2007 4:06:41 PM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
Sep 13, 2007 4:06:42 PM
com.sun.xml.ws.transport.http.servlet.WSServletContextListener
contextInitialized
INFO: WSSERVLET12: JAX-WS context listener initializing
Sep 13, 2007 4:06:43 PM
com.sun.xml.ws.transport.http.servlet.RuntimeEndpointInfoParser
processWsdlLocation
INFO: wsdl cannot be found from DD or annotation. Will generate and
publish a new WSDL for SEI endpoints.
Sep 13, 2007 4:06:43 PM
com.sun.xml.ws.transport.http.servlet.WSServletContextListener
contextInitialized
SEVERE: WSSERVLET11: failed to parse runtime descriptor: class:
demo.hw.server.jaxws.CreateGreeting could not be found
class: demo.hw.server.jaxws.CreateGreeting could not be found
at com.sun.xml.ws.modeler.RuntimeModeler.getClass(RuntimeModeler.java:
269)
at
com.sun.xml.ws.modeler.RuntimeModeler.processDocWrappedMethod(RuntimeModeler.java:
558)
at
com.sun.xml.ws.modeler.RuntimeModeler.processMethod(RuntimeModeler.java:
505)
at
com.sun.xml.ws.modeler.RuntimeModeler.processClass(RuntimeModeler.java:
353)
at
com.sun.xml.ws.modeler.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:
249)
at
com.sun.xml.ws.server.RuntimeEndpointInfo.createSEIModel(RuntimeEndpointInfo.java:
168)
at
com.sun.xml.ws.server.RuntimeEndpointInfo.init(RuntimeEndpointInfo.java:
315)
at
com.sun.xml.ws.transport.http.servlet.WSServletContextListener.createModelAndMetadata(WSServletContextListener.java:
197)
at
com.sun.xml.ws.transport.http.servlet.WSServletContextListener.contextInitialized(WSServletContextListener.java:
117)
at
org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:
3764)
at
org.apache.catalina.core.StandardContext.start(StandardContext.java:
4216)
at
org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:
760)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:
740)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:
544)
at
org.apache.catalina.startup.HostConfig.deployDescriptor(HostConfig.java:
626)
at
org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:
553)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:
488)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
at
org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:
311)
at
org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:
120)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:
1022)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:
1014)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:
443)
at
org.apache.catalina.core.StandardService.start(StandardService.java:
448)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:
700)
at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
Sep 13, 2007 4:06:43 PM org.apache.catalina.core.StandardContext
listenerStart
SEVERE: Exception sending context initialized event to listener
instance of class
com.sun.xml.ws.transport.http.servlet.WSServletContextListener
WSSERVLET11: failed to parse runtime descriptor: class:
demo.hw.server.jaxws.CreateGreeting could not be found
at
com.sun.xml.ws.transport.http.servlet.WSServletContextListener.contextInitialized(WSServletContextListener.java:
128)
at
org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:
3764)
at
org.apache.catalina.core.StandardContext.start(StandardContext.java:
4216)
at
org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:
760)
at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:
740)
at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:
544)
at
org.apache.catalina.startup.HostConfig.deployDescriptor(HostConfig.java:
626)
at
org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:
553)
at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:
488)
at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
at
org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:
311)
at
org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:
120)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:
1022)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:
1014)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:
443)
at
org.apache.catalina.core.StandardService.start(StandardService.java:
448)
at org.apache.catalina.core.StandardServer.start(StandardServer.java:
700)
at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
Caused by: class: demo.hw.server.jaxws.CreateGreeting could not be
found
at com.sun.xml.ws.modeler.RuntimeModeler.getClass(RuntimeModeler.java:
269)
at
com.sun.xml.ws.modeler.RuntimeModeler.processDocWrappedMethod(RuntimeModeler.java:
558)
at
com.sun.xml.ws.modeler.RuntimeModeler.processMethod(RuntimeModeler.java:
505)
at
com.sun.xml.ws.modeler.RuntimeModeler.processClass(RuntimeModeler.java:
353)
at
com.sun.xml.ws.modeler.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:
249)
at
com.sun.xml.ws.server.RuntimeEndpointInfo.createSEIModel(RuntimeEndpointInfo.java:
168)
at
com.sun.xml.ws.server.RuntimeEndpointInfo.init(RuntimeEndpointInfo.java:
315)
at
com.sun.xml.ws.transport.http.servlet.WSServletContextListener.createModelAndMetadata(WSServletContextListener.java:
197)
at
com.sun.xml.ws.transport.http.servlet.WSServletContextListener.contextInitialized(WSServletContextListener.java:
117)
... 24 more
Sep 13, 2007 4:06:43 PM org.apache.catalina.core.StandardContext start
SEVERE: Error listenerStart
Sep 13, 2007 4:06:43 PM org.apache.catalina.core.StandardContext start
SEVERE: Context [JWSDP] startup failed due to previous errors
Sep 13, 2007 4:06:43 PM
com.sun.xml.ws.transport.http.servlet.WSServletContextListener
contextDestroyed
INFO: WSSERVLET13: JAX-WS context listener destroyed
Sep 13, 2007 4:06:44 PM org.apache.catalina.core.ApplicationContext
log
INFO: org.apache.webapp.balancer.BalancerFilter: init(): ruleChain:
[org.apache.webapp.balancer.RuleChain:
[org.apache.webapp.balancer.rules.URLStringMatchRule: Target string:
News / Redirect URL: http://www.cnn.com],
[org.apache.webapp.balancer.rules.RequestParameterRule: Target param
name: paramName / Target param value: paramValue / Redirect URL:
http://www.yahoo.com],
[org.apache.webapp.balancer.rules.AcceptEverythingRule: Redirect URL:
http://jakarta.apache.org]]
Sep 13, 2007 4:06:44 PM org.apache.catalina.core.ApplicationContext
log
INFO: ContextListener: contextInitialized()
Sep 13, 2007 4:06:44 PM org.apache.catalina.core.ApplicationContext
log
INFO: SessionListener: contextInitialized()
Sep 13, 2007 4:06:44 PM org.apache.catalina.core.ApplicationContext
log
INFO: ContextListener: contextInitialized()
Sep 13, 2007 4:06:44 PM org.apache.catalina.core.ApplicationContext
log
INFO: SessionListener: contextInitialized()
Sep 13, 2007 4:06:45 PM org.apache.coyote.http11.Http11BaseProtocol
start
INFO: Starting Coyote HTTP/1.1 on http-8080
Sep 13, 2007 4:06:45 PM org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
Sep 13, 2007 4:06:45 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/78 config=null
Sep 13, 2007 4:06:45 PM org.apache.catalina.storeconfig.StoreLoader
load
INFO: Find registry server-registry.xml at classpath resource
Sep 13, 2007 4:06:46 PM org.apache.catalina.startup.Catalina start
INFO: Server startup in 4406 ms
Thanks in advance.First, you have not correctly annotated your SEI and implemenation class. If you want to use a SEI to define your web service. Then your implementation class should not have any JAX-WS/ JSR 181 annotations except the following.
@WebService(endpointInterface="whateverpackage.HelloWorld", portName="HelloWorldPort",serviceName="HelloWorld" )
public class HelloWorldImpl implements HelloWorld{
public Greeting createGreeting(Person per) {
Greeting grt = new Greeting();
grt.setMessage("Welcome back " + per.getFirstName() + "," +
per.getLastName());
grt.setDateTime(new Date());
return grt;
and the SEI should be:
@WebService(name="HelloWorldPort")
@SOAPBinding(style=SOAPBinding.Style.DOCUMENT,
use=SOAPBinding.Use.LITERAL)
public interface HelloWorld {
@WebMethod(operationName="greet", action="urn:greet")
@WebResult(name="greeting")
Greeting createGreeting(@WebParam(name="person") Person per);
This is because the SEI defines the abstract description of the web service in the WSDL which is the PortType definition. Therefore no serviceName should be specified on the SEI. The implementation class defines the concrete portion of the WSDL so it will only specify the portName, serviceName and then reference the SEI via the endpointInterface element of the @WebService annotation.
As for helping out with Eclipse I can't be of any help. You might want to give NetBeans 5.5.1 or later a try.
Edited by: dkohlert on Sep 13, 2007 9:19 PM
Maybe you are looking for
-
Hello I have a few questions and I need some help with my iTunes and iPod
Hello iTunes people. I have a little problem with my iTunes. I actually almost know nothing about iTunes really. But I have had a 80 gig ipod .. ummm I think it's a iPod classic maybe. A long time ago I just downloaded iTunes. I think one of my tech
-
Commited quantity but there are no open sales orders.
Item show as x quantity committed in inventory data tab in Item Master data. There is no open sales orders for specific item though. Client is on SAP 2007 A SP 00 PL42. Anyone had this before..? Solution?
-
How to back up dying hard drive
Hello Everyone. If anyone recalls my question that was tried to answer... PLEASE PLEASE READ ALL!!!!!! My Hard drive is a: G-Drive slim 500GB EHD 5400RPM not sure on warranty. Here is the story. It all started when I was plugging in the HD in my sist
-
Keep getting error message when trying to connect
First, I am severly hearing impaired and telephone support is not an option. I went from an iMac G5 to an iMac 3.4 GHz Intel Core i7. Contribute had been working perfectly with the old iMac. Now whenever I try to connect I get the following error mes
-
Hi, We just installed PS CS5 on a new Mac Mini running OSX 10.6. Every time we crop a photo and send it to the newsroom it shows up very big in Quark. We do not have this problem with PS CS4. This only has to do with a JPG, EPS's work fine. Is there