IOS remote resources

Hello,
Everytime I try to connect to our Remote Gateway using any iOS device (internally or externally) i get the error 'Invalid feed response'.
On a Windows PC or an Android Device the Remote Apps appear and I can access them. When looking at the log the only messages I have are:
*** Application launched ***
Application became foreground application
Application went into background
Our Servers are running Windows Server 2008 R2.
Any suggestions or help would be greatly appreciated.
Many thanks.

Hi,
Is there any update?
Thanks.
Jeremy Wu
TechNet Community Support

Similar Messages

Still getting preparing your Remote Resources with iOS client v8.1.6

Updated to 8.1.6 but still getting the dreaded 'Preparing your Remote Resources'.
This is a 2008 R2 RDS server and it hasn't connected since v8.1 of the RDClient App. However, I have another customer with another 2008 R2 RDS server and remote resources in the app work perfectly!
I've compared the two servers side by side, made sure every single setting is the same, but still one works and one doesn't. Somebody please help, it's driving me and my customer crazy.

Hi Darmesh,
Thanks for the reply. Yes, I can confirm that I am using the full url, if I don't add the rdweb/feed/webfeed.aspx then it doesn't connect at all, only when I use the full url does it get as far as 'preparing your remote resources'.
I've removed the remote resources and re-added multiple times. I also get the same behaviour on both my iPad and iPhone. Numerous employees of the customer have also complained about it not working since the 8.1.0 update on their iOS devices, so it's been
tested on numerous devices, and with every single release since 8.1.0.
Everything else connects to the server fine including the Mac OS app. I also have another customer with a 2008 R2 RDS server and this connects from the iOS app perfectly. I spent hours the other night comparing every setting between the two servers and they
are now set up identically, except one works and one still doesn't!
Chris

IOS RD Client Remote Resources "Failed to Parse RDP Configuration"

I encounter the error below when attempting to connect to Remote Resources. This worked perfectly yesterday but hasn't at all today. I removed and added the RemoteApp entry on the 2008 R2 server but continue to encounter this error. Any help is greatly appreciated.
"Failed to Parse RDP Configuration"
Thanks,
Randal

Hi,
Would you please provide us the log file for check.
Settings -> Send log via email -> Post the log here.
Thanks.
Jeremy Wu
TechNet Community Support

IOS Remote Desktop app and computers connected to SBS 2008--can't get it to work

I can connect directly to the server without a remote resource in the IOS app.
But I'd like to be able to connect to computers in the office like we can through RWW. RWW works fine, but not from my phone. (Yes I can connect to the server and take over computers from the phone but I don't want other people in the office to log
into the server first!).
I can never get the remote resources section in the app to connect. I usually get "Unable to locate any remote resources for the URL". error in the resources section. I've tried a simple "https://remote.domain.com", "https://remote.domain.com:987",
etc.
We have a self-signed certificate. I can't think of anything in the server setup that is anything other than normal.
I can do direct connect using "Remote Desktop Connection" in windows 7. In the remote desktop server settings I just put remote.domain.com and "Ask for password (NTLM)" for the login method. Then on the general tab I have just the
simple computer name and the domain\username. That's all I had to setup to get that to work.
Any suggestions?

Hi Michael,
Thank you for posting in Windows Server Forum.
Have you setup RD Gateway server in your environment? Are you trying to access the RWW through it?
On server side you can choose “Bypass RD Gateway server for local addresses” under RemoteApp manager and check the result.
For more information, you can check below links for detail.
Remote Desktop Client on iOS: FAQ
http://technet.microsoft.com/en-us/library/dn473015.aspx
Getting Started with Remote Desktop Client on iOS
http://technet.microsoft.com/en-us/library/dn473013.aspx
Hope it helps!
Thanks.
Dharmesh Solanki

IOS Remote Desktop Client Logon Issue Prompts to Logon 3 Times with RDGW

I have an issue when connecting from the Remote Desktop client iOS on multiple iPads/users.
First a little background: We have an RDS Web Access / RDS Gateway (2012 R2) setup and properly configured. We can logon using it just fine from the Mac OS version of the app, Android version of the app, or from a Windows PC. When we try to
connect via the iOS app we get the prompt to logon 3 times. Due to security reasons, we do not want them to store their credentials on the iPads, which is the only method I have found to eliminate the triple password entry. It only prompts once on the Mac
OS version, Android version or from a Windows PC.
The password isn't being entered incorrectly and the servers are not registering any Audit Failures for the logon attempts. Can you assist?
Additionally I would like to recommend the addition of a feature to be able to setup remote resources but prompt for the password on app launch for security reasons. That way they would have to enter it once but then they could access any resources needed.
Thanks,
Nate L

I am not comfortable posting the entire log file but let me give you the high level summary. The settings section for the active connection:
[2014-Jun-17 12:45:23] RDP (0): Final rdp configuration used: {
    activeUsername = "domain\username";
    arcTimeout = 1800;
    configurationVersion = 8;
    console = 0;
    gatewayId = XXXXXXXX;
    host = "InternalServerHostName.domain.local";
    label = "";
    mouseMode = "-1";
    offsetX = 0;
    offsetY = 0;
    peerIp = "ExternalRDSGatewayIP";
    port = 3389;
    previousMouseMode = 1;
    previousUtilityBar = 0;
    screenshotScale = "0.125";
    soundMode = 1;
    swapMouseButtons = 0;
    type = rdp;
    utilityBar = "-1";
    zoomFactor = 1;
    connections =
        ...bunch of addresses...
    host = "ExternalRDSGatewayHostName";
    id = XXXXXX;
    port = 443;
    temporary = 1;
    type = rdp;
    kCFProxyTypeKey = kCFProxyTypeNone;
It then attempts to connect to the InternalServerHostName.domain.local.
[2014-Jun-19 09:40:01] RDP (0): Resolved 'InternalServerHostName.domain.local' to 'ERROR: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.' using NameResolveMethod_Unknown(0)
[2014-Jun-19 09:40:01] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.(phase: 0, type: 0, reason: 0, systemCode: 0, systemMessage: )
[2014-Jun-19 09:40:01] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-19 09:40:02] RDP (0): Showing credentials dialog
It then displays the same settings again with the exception of an additional line after the gatewayId line:
gwAutodetectState = kConnectionGwAutodectedForceGW;
Then it goes through the interface list, not using any proxy, correlation id, then resolves name:
[2014-Jun-19 09:40:10] RDP (0): Resolved 'ExternalRDSGatewayHostName' to 'ExternalRDSGatewayIP' using NameResolveMethod_Unknown(0)
[2014-Jun-19 09:40:11] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/librdp/librdp/private/httpendpoint.cpp' at line 217
    User Message : The gateway failed to connect with the message: 403 Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator.
[2014-Jun-19 09:40:11] RDP (0): Error message: The gateway failed to connect with the message: 403 Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator.
)(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2014-Jun-19 09:40:11] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Jun-19 09:40:11] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Jun-19 09:40:11] RDP (0): Showing credentials dialog
Then it displays the same settings again except for the gwAutodetectState line changing to:
gwAutodetectState = kConnectionGwAutodectedHTTPSTried;
Then it connects ok. I went to our firewall (MS Forefront TMG) and monitored for traffic from the iPad iOS App (based on network it is on). I don't see the initial connection attempt at all, which is expected because according to the log above it looks
like it tries to connect to the host directly...which it shouldn't?
Then in the second attempt I see it trying to go to http://ExternalRDSGatewayHostName:443/remoteDesktopGateway/ which again it shouldn't be doing because that URL (the remoteDesktopGateway) is not part of the RDSGW or RDSWA 2012 R2 IIS
config or am I missing something? It should be going to Rpc or RDWeb right? or do I need to allow that path through too?
Thanks,
Nate

MacOS 8.0.10 RDC doesn't download remote resources RDWEB

Hi there,
We're suffering the same issues as reported in this thead in the serviceside forum
https://social.technet.microsoft.com/Forums/systemcenter/en-US/0a2e47d7-d01b-4435-9817-341e398c260d/remote-resources-doesnt-load-osx-rdp-app-v-809?forum=winserverTS
It does seem (through sniffing) that the Mac will keep hammering the /RDWeb/FeedLogin/WebFeedLogin trying to get to /RDWeb/Feed/Webfeed.aspx
2014-09-20 14:46:39 %MYPUBLICSERVERIP% GET /RDWeb/FeedLogin/WebFeedlogin.aspx ReturnUrl=%2fRDWeb%2ffeed%2fwebfeed.aspx
443 - %MYPUBLICCLIENTIP% Mozilla/5.0 - 401 1 2148074242 31
This doesn't authenticate, we're not able to change the settings suggested.
How can the MacOS client not support NTLMv2 auth (if that is the problem), and the iPad one does? At the very least it should fail after a go or two rather than hammering consistently
Shaun

Hi Shaun,
Thank you for posting in Windows Server Forum.
Might possible that there is some configuration issue or connection issue from MRD IOS end. Please reinstall-reconfigure and check. Apart kindly collect the log for further research.
Microsoft Remote Desktop>About Microsoft Remote Desktop>Send log via email
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Microsoft RDP on iOS8 Remote Resource address

Since updating my iOS devices to iOS 8 and above when I put in the webfeed address for my works apps in the Remote Resource section of your app it does not connect. No error messages, just sits there spinning. I am running your RDP on my MacBook Pro with
Yosemite 10.10 and the same webfeed address works just fine in the Remote Resource section. We would like to know what is different in your app for iOS versus OS.
Thanks

Hi,
How is everything going on? Is there any update?
Both App for OS and IOS supports to perform remote session to the windows end, but actually when using RDP on windows end it will handle only with Microsoft part but with MRD IOS must compatible with IOS end also and so need to check the setting and supporting
idea from IOS end also.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Portal failed to access remote resource due to network failures

Hi,
We have a portlet that allows users to upload files to a SQL Server database and make it available for other users to access. The portlet code is on our remote servers. Everything works fine in dev environment, but certain files fail in pre-prod and prod within the portal, but work fine when the code is executed outside the portal.
I keep getting this error:
Error - Portal failed to access remote resource due to network failures. Try again later or contact your portal administrator.
What could the problem be?
Thank you for your help.
Rad

If the Studio service looks good on the remote server where Studio is installed (check that
the service is started and look in the Studio logs for any warnings or errors), you should
also verify the configuration settings in the Studio remote server object. Is it properly
configured and pointing to the correct remote server?
If so, check the portal servers access to the Studio server via the port specified in the remote
server (default is 11935). You can test this by doing a telnet test on the portal server. In a cmd
prompt (Windows) or on the CLI (Unix), type 'telnet [studioserver] 11935', where "<servername> is
the name of your Studio remote server. The screen should just go blank, meaning that there is
something accepting connections on that port on the given server. (We would hope it's the Studio
app and not another service occupying that port.) If you get "Could not open connection to the host"
or some such similar result, check that the network between the portal and the Studio remote server
is open (ie, make sure there isn't any port blocking or a firewall in place that would hinder the
communication between the two servers).

How do you "Add a Device" from the iOS remote app multiple times?

Anyone know a way to trigger the "Add a device" feature in the iOS remote app after you've already added one?
I have multiple Apple TVs scattered around the house and multiple people who would like to use them. I have home sharing set up through my Apple ID so this works great for me. For everyone else, I'd rather not sign my account in on their devices, even if its just for home sharing. They can "Add a device" in the remote app to connect to one of the Apple TVs, but only one.
I'm using iOS 8, iPhone 5s and 6, Apple TVs 2nd and 3rd Gen

I would rather not sign my account into other people's devices.
As I mentioned, I already have my own devices signed into home sharing.
Alternatively, is there a way to get an Apple TV attached to multiple home sharing accounts?
If there is, I could have each of the people in my household set up home sharing on their own accounts.

OSX Remote Desktop and RDGateway Remote Resources

Is it possible or planned to support RDGateway for published Remote Resources, using Microsoft Remote Desktop for OSX?
thanks

Hi,
I have just confirmed with the product group, RD Gateway is supported for Remote Resources. It does not have dedicated settings for Remote Resources.
Furthermore, the feed server (RDWeb) must be reachable by the client. If a GW is needed then the administrator must have configured the published apps to use one.
More information:
Checklist: Make RemoteApp Programs Available from the Internet
http://technet.microsoft.com/en-us/library/cc772415.aspx
Configure the Remote Desktop Web Access Server to Allow Access from the Internet
http://technet.microsoft.com/en-us/library/cc770330.aspx
Many Obstacles in Publishing RemoteApps to the Internet in Windows Server 2012
http://social.technet.microsoft.com/wiki/contents/articles/22276.many-obstacles-in-publishing-remoteapps-to-the-internet-in-windows-server-2012.aspx
Best Regards.
Jeremy Wu
TechNet Community Support

IOS Remote App and ATV2

I cannot get the iOS remote app to connect to my Apple TV2. It connects just fine to the iTunes libraries on my network, but from three different iOS devices I get the same error. The app sees the ATV2 and tries to connect, but fails. The odd thing is, it used to work flawlessly. I hadn't used the app for a month or so and now its not working. I've tried resetting the apple TV (both power cycle and full settings reset) as well as rebooting the router and the iOS devices. I reinstalled the remote app as well. The weird thing is, I can airplay mirror to the ATV2 fine, just the remote app fails. The error message I receive after sitting at the "Connecting to Apple TV" screen is as follows:
"Remote can't connect to your iTunes library. Check your network settings and try again.
I have no idea what changed in my set up, perhaps a software upgrade screwed something up but I'm at a loss I've tried everything. The ATV2 is running 4.4.4, the iOS devices are all up to date running latest remote app.
I Apple TV can access my iTunes libraries fine as well.

Mar 30, 2013 11:31 AM Recently purchased new AirPort Extreme. The wifi network works fine and all is well. The issue is I can not connect my Remote app with iTunes or my Apple TV. - I have rebooted my AP Extreme as well as my AP TV and my PC. - I have logged out of Home Sharing and logged back in. - On my iPad or iPhone I add Library and receive a Passcode, I enter in the PC into iTunes and I receive an error message "The passcode you entered was incorrect. Please try again" I receive this error when entering all my idivices. - I have deleted the Remote App and reinstalled it, but continue to receive the same error message. - All soft ware on all divices are current. - I have diabled my firewall. Who has any ideas? Thanks MacBook Air, iOS 5.1.1

IOS Remote and Home Sharing problems with iTunes 10.6.3

I'm having a problem with Home Sharing and the iOS Remote app accessing iTunes since the 10.6.3 update. I have the following:
2011 Mac Mini Server running Lion 10.7.4 and iTunes 10.6.3
IPhone 4 running iOS 5.1
iPad 2 running iOS 5.1.1
Latest model Apple TV
The Remote app on both the iPhone and iPad are unable to connect to the iTunes library on the Mini (the app will just sit there trying to connect but never make a connection). The Apple TV is showing the same behaviour: when I go into 'Computers' it tries to connect to my library without success.
I've tried a few things:
1) Turning off and re-enabling Home Sharing on the Mac Mini
2) Deleting my library in the iOS app and then re-adding it
In both cases this seemed to work at first, but then after a while I was unable to connect again.
I have since discovered that if I quit and restart iTunes on the Mac this seems to resolve the issue on all of the other devices. But again this is a short term fix and after a while they are once again unable to connect.
The Mac Mini is always on and is set to not sleep (although I have to enter the password again after an hour).
At first I thought this might be time related, and that if the Mac had been idle for a while and the drives were 'sleeping' then the issue would occur. However, if I have left the Mac for several hours and then go back to it and login and start something playing in iTunes the other 3 devices still cannot connect even though iTunes is active and reading from the drive. As soon as I restart iTunes they can all see the library again for a while.
Does anyone have any suggestions?
thanks
Mark

Same thing here except I'm not running server software on the Mac Mini. The Apple support person said that iTunes is the same, server or not. He recommeded setting sleep to never, but I get the same connection problems. I also automatically restart the Mini and relaunch iTunes on startup every morning at 6 AM. And, as with your experience, the only temporary solution is to quit and restart iTunes at the time that I want to connect. Apple TV, iPhone, and iPad all have the same connection problem. My only hope at this point is 10.8. I have to say, 10.7 has never behaved better than a beta release. I hope they took a little more time with Mountain Lion.
Sorry I don't have a solution. I wanted to add my name to the list and hope someone out there has some insight to share.

How do you use a Gateway with Remote Resources on a Mac (8.0.5)?

I might be missing something obvious, but I have a Gateway configured in the OS X 8.0.5 client, but when connecting to remote resources it does not seem to use it. When you configure a connection to a specific machine there is a drop down for using one of
the preconfigured gateways but not when configuring remote resources. I see no evidence a gateway is being used when I try to connect to a RemoteApp from off site.
Am I missing something?

Hi,
Firstly, why do you think that remote resources does not use RD Gateway? Please let us know more details.
Meanwhile, please make sure that the configurations are correct on the RD Gateway server.
Checklist: Make RemoteApp Programs Available from the Internet
http://technet.microsoft.com/en-us/library/cc772415.aspx
Thanks.
Jeremy Wu
TechNet Community Support

Can I use the iOS remote app to rate iTunes songs on my Mac

I have the Apple iOS remote app on my iPad I was wondering if I could use this to rate songs as I'm listening to them instead of having to walk to my Mac and and change the rating in iTunes

An Apple TV has an interface that requires navigation, the alternative was offered to counter the need for your TV (if one was using home sharing they would also need a computer up and running). If the content is being streamed using airplay then you can change the content using your IOS device remotely.
If that does not work for you, can provide feedback to Apple if you wish.
http://www.apple.com/feedback/

Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"

Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------

My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be.

IOS remote resources

Similar Messages

Maybe you are looking for