IOS5 TV Out Settings?

I'm trying to connect my iPad2 with iOS5 to my TV using the Apple Composite AV Cables. The audio works fine, but the video is visible, but scrolling like the vsync is off.
I've tried the same TV and same cables with my daughter's iPod Touch Gen 4 with iOS5 and it works fine.
I try to go into Settings -> Video (on both iOS5 devices) and I expceted to see a TV Out setting where I can see if it's set to NTSC or PAL. This no longer seems to exist.
Has it been moved somewhere? Or is it gone?
Does anyone know if the scrolling effect is what you'd see if you plug in a PAL signal into an NTSC TV? I'm thinking it's outputting in PAL instead of NTSC, but can't validate this without the setting available to change it.
Any ideas?
Thanks.

NTSC is the US Standard for TV Standard Def signals (480i)
PAL is the standard in the UK (576i)
Which is why I think that this may be causing the scrolling effect. If each frame is being drawn as a 480 row screen and the screen is 576 rows, rows 481 through 576 will be part of frame 2 instead of frame 1, etc. (I know the number of rows are actually half for those that understand interlaced vs. progressive, but keepings things simple for those that don't).
And my iPad is set up for English as a language with United States as Region Format, so if it is supposed to use that to detect NTSC vs. PAL, it may not be.

Similar Messages

Google Analytics OPT-OUT Browser Add-on 0.9.6 doesn't retain OPT-OUT settings...never did really. Also JAVA now refuses to create updates for WinXP/FireFox.

I use PaleMoon now trying to get rid of advertising sharks. I have WINXP still - need assistive-technology computer for pain so taking time on getting new computer.
I have been severely sabotaged by advertising conglomerates selling my private information. They have no right -yet they do whatever they want. Anyhow...I've tried to OPT-OUT of EVERYTHING POSSIBLE. I've tried 5 places found. Google, NAI, DAA, & FIREFOX HELP said go to about:config was instructed to turn "from false to true" the "privacy.tracking.protection.enabled" .But I couldn't keep this setting because this also has to be set to false to use any saved log-on's to my accounts., and add-on AD BLOCK PLUS 2.6.7 when I was on Firefox & had some ticks and now it is disabled because it won't work with PaleMoon 25.2.1
This case is about GOOGLE OPT-OUT. Starting here: http://www.google.com/settings/ads?hl=en&sig=ACi0TCgWymel0CNWxdcnEWPzWNs9wDd7cVQHxHsmtz4w30CAyHk7MqyzzZdGh3m6FpDaJsKmunTLEvJZY5LAm3h6gIdzE30L-Q
There are 2 columns. The left one "ADS ON GOOGLE" NEVER RETAINS AFTER LOG-OFF. The right column "Google ads across the web
" seems to retain sometimes - if I remember right it falls off after a period of time as opposed to after just LOGGING-OFF. Below the columns there are options, but I don't have a GOOGLE ACCOUNT.
Also down there is this link: https://support.google.com/adsense/troubleshooter/1631343?hl=en ...you see the box with this: Advertising industry program participation
Google is a participating member of groups that have developed industry privacy standards like the Ad-Choices icon for online advertising.
Group Location
Network Advertising Initiative United States
Digital Advertising Alliance (DAA) United States
European Digital Advertising Alliance Europe
Digital Advertising Alliance of Canada Canada
....I clicked OPTED OUT FOR NAI on their link http://www.networkadvertising.org/
...I clicked OPTED OUT FOR DAA on their link http://www.aboutads.info/
...I clicked PROTECT MY CHOICES and downloaded the app.
These 1st 2 links used to have the same trouble and didn't retain ANYTHING and wouldn't re OPT-OUT ANY UNTIL THEY WERE SATIATED - saying I didn't have 3rd party cookies allowed when I did - this took hours.
I sent numerous trouble reports to them that they ignored - then I think I sent one to Firefox and it is much better but still not completely right. Today DAA retains 106 out of 122 and if I repeatedly RE-OPT-OUT successively I can get it to 121 out of 122 - never completely. (currently the one not taking is Accuen Inc. but it changes periodically - makes me think they set one up to take my info and then share it with all of them - lol )
Same for NAI currently I started with 94 out of 96 - next re-OPTED-OUT got it to 95 out of 96 and no further and same co. Accuen Inc (accuenmedia.com ) wouldn't update.
NOTE: I was copy/pasting the list of NON-OPT-OUT'S to them and my own document file to try and find trends/problems...now NAI programmers protected the list from being able to be COPIED AND PASTED!!! That's the opposite of being open and interested in making this work, right? Why would they want to allow us to OPT-OUT of their criminal espionage behavior...RIGHT? (lol) FYI: I recorded that the big one that was always retained before this one was...MEDIA MATH INC.
MANY Opt-outs would drop off while on-line and ALL would drop-off once logged-off. Now it's retaining most once logged off - but it hasn't been long enough to tell if they'll fall back into their bad habits as they've done before...
This has been going on forever for me - I've been reporting this malfunction since 2013.
Of course I downloaded PROTECT MY CHOICES FOR FIREFOX via NAI AND DAA'S links ...http://www.aboutads.info/PMC#protect-your-choices-for-firefox ............they both go to the same place???.....PROTECT MY CHOICES http://www.aboutads.info/plugin/install/firefox....that seems odd...it's as if they are the same entity then. ABOUTADS is DAA'S WEBSITE. NAI'S IS NETWORKADVERTISING.ORG so why would NAI use DAA'S PROTECT MY CHOICES app?
Lastely, I also requested that the COOKIES NAMES BE UNIFORMLY IDENTIFIABLE. All the OPT-OUT COOKIES that are to be forevermore retained on my computer and that I am to trust the EVERY FUNCTION OF - well they all have different COOKIE NAMES!! Most of the names you can not tell that they are OPT-OUT COOKIES!! - SO NOWWW They have created another problem.
We can no longer just "DELETE ALL COOKIES".
PLUS, we can no longer go through our cookies and delete individual ones that snuck through.
Every one of the OPT-OUT COOKIES SHOULD SAY "OPT-OUT" IWITHIN THEIR NAME OF THEIR COOKIE - PERIOD. RIGHT? (LOL) For real. Why was this mess was allowed?
REALLY IN MY OPINION THESE COMPANIES SHOULD BE BLOCKED AT THE LOCAL PHONE COMPANIES LEVEL - IN OUR SERVERS. We should not have to deal with them. Same thing with viruses, malware and such beasts. But I digress.
In summary:
1.)Google Analytics OPT-OUT Browser Add-on 0.9.6 doesn't retain OPT-OUT settings
2.) JAVA refuses to create updates for WinXP/FireFox/PaleMoon.
3.) DAA & NAI still don't retain ALL OPT-OUT settings and never completely OPT-OUT all companies.
4.) OPT-OUT cookies should be uniformly names with the words OPT-OUT in their titles.
5.) Ad Block Plus 25.6.7 doesn't work for Pale Moon and there is no alternative - (didn't work great in FireFox)
Right now I'm mainly interested in #1)retaining my GOOGLE OPT-OUTS while on line AND while logged off since it is attacking my computer and steeling all the speed until it freezes my keyboard.
Currently I am trying to remember to run through 3. OPT-OUTS every time I log on.
Thanks so much!

hello, palemoon's support forums are here: http://forum.palemoon.org/

I just setup mine and my wife's iphone 4 on new ios5 and icloud settings. Our phones are both on my account. Her phone is receiving my contacts, calendars, etc. due to this. Is there a way I can separate her phone from my account in itunes and icloud?

I just set up mine and my wife's iphone 4 on new ios5 and icloud settings. I have both phones on one account and actually she purchases apps/music with my sign in and password on her phone.
Now that we are set up on icloud settings, her phone is receiving my calendars, contacts, etc. she does not want and does not need any of these items on her phone. How can I separate the two now? is there a way to have a different login and password for her phone so that it sets up on its own icloud settings?
Thanks

She should create her own Apple ID and start using it for everything, including purchasing.
It starts on the computer in iTunes. There are 2 elements we are dealing with;
purchasing items from iTunes (apps, music) and playing items in iTunes.
Only one Apple ID can be signed in at a time for purchasing. But you can "authorize" multiple Apple IDs for playing. As long as iTunes is "authorized" with both your Apple IDs, items purchased with these different accounts can coexhist in one iTunes Library.
Why this is important, it has to do with back up and being able to transfer purchased items to the computer.
Once your wife sets up her own account, she will want to connect the iPhone to the computer to back it up and transfer any new purchases, iTunes will need to be authorized for that to happen.
With that said, a new feature of iColud is back up. It will back up everything to the cloud. You need to turn it on, it's at the bottom of the iCloud settings on the iPhone. It is limited to 5GB for free, you can buy more. I used all 5GB my first back up, but I have a lot of crap, and there's a lot of things on the iPhone that get backed up that don't count against the 5GB, so it might be plenty of space for you.
When it comes to the iCloud and contacts/calendars, again your wife needs her own account. (ASAP) Does she have a computer in her life that has a list of her contacts and calendars. I hope so, because it sounds like her contacts on her iPhone are now mixed with yours. Or I hope there is still an untouched list of contacts on the iPhone that iCloud didn't mix. Either way Delete your iCloud account from her iPhone. Remove the data, as long as it isn't hers. This will delete all info being synced to the cloud. If she still has a list of her old contacts on the iPhone, great. If not, I hope she has them somewhere else, like her own computer.
Create her an iCloud account. Enter the account info where ever there is a list of contacts/calendars and get the info onto the cloud, then add the iCloud settings to any other devices.
Any new apps/music purchased with her account will back up to the cloud. I don't think apps purchased with your account will. She will also need to enter your password for updating these apps, because they were purchased with your account.
I hope this helped and didn't make thing more confusing. Good luck!

Digital AV Adapter: "Accessory not supported" and "TV Out" settings gone after upgrading iPad 2 to iOS 5.0.1

I've used the digital AV Adapter (bought in Apple Store) nicely on iPad 2 with iOS 4.3.x.
After upgrading to iOS 5.0.1 the TV Out settings have disappeared from the General Settings menu (no matter if adapter is plugged in or not).
I thought that maybe it was time to do a full reset (just in case), so I did that, while the adapter was still plugged in.
When the iPad finished resetting I got a popup message on the lock screen saying:
"This Accessory is Not Supported by iPad"
The adapter sort of works, i.e. there is a picture on my TV, but I cannot control the TV output settings which I could in iOS 4.3.x.
The TV Out settings are completely missing from the General Settings menu (if they were moved in iOS 5.0.1 somewhere else, I could not find them).
The "TV Out" menu item is not there at all.
I cannot select between PAL/NTSC output anymore which is crucial for me as it seems that the iPad current setting is PAL, while I need to be it NTSC, otherwise video drop frames/stutters when played back over a TV.
What I would like to know if there is anybody out there who has iOS 5.0.1 and actually can see the "TV Out" settings under the General Settings (I think it should follow the "iTunes Wi-Fi Sync" directly), because no matter what I did I cannot the settings menu to be displayed (I've reset the device, plugged and unplugged the adaptor and HDMI cable multiple times, tried different TVs, etc)
Or, if the settings are in fact, gone by design, then how am I supposed to play 23.976 or 24 FPS media on a 1080p50 TV without stuttering (don't answer that, I know it is impossible, I am just frustrated). This is the first ever device I bought from Apple and I must say I am not that impressed by such turn of events.
I mean, what kind of update removes essential features and makes the officially produced accessory suddenly "not supported"? Did they even test their own official accessory?? Seems not to me.
This thread is talking about sort of similar issue (although it is about the VGA adapter):
https://discussions.apple.com/thread/2413622?start=0&tstart=0

Hi,
the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

HT1454 Can't see ipod videos from 60GB ipod classic. I have Apple USB/video cable running through Onkyo receiver into Samsung TV. Video & TV out settings seem correct-I can see album cover, but no video. Is it possible to get itunes music videos to play

Can't see ipod videos from 60GB ipod classic. I have Apple USB/video cable running through Onkyo receiver into Samsung TV. Video & TV out settings seem correct-I can see album cover, but no video. Is it possible to get itunes music videos to play or do I need to get new ipod. It works on my iPad and iPhone, but not through iPod Classic.

Are these music videos located under Videos on your iPod? Do it play other regular movies (if you have any on the device)?
B-rock

SAP PORTAL Time-Out Settings / BO iView Reports..?

We have created BO object-specific iView requests in SAP PORTAL based on Ingo's posting....
SAP BusinessObjects Enterprise & SAP Enterprise Portal - Part 3 of 4
Currently, just posting some small CR4E and Analysis for Office (*Design Studio will be added in a few months) report objects that are based on BW queries - and response time is a few seconds.
However, long-term as our BW grows - and the volume of data/periods expands we may see some reduction in the performance of these reports, and they make take a few-minutes to return data.
The SAP Portal team already have an issue with an ECC / T-Code report (*no Business Objects involved) which runs over 100 seconds - and hits a Portal time-out....and are wondering if we would hit the same issue if a CR4E within the Portal ran longer than 100 seconds...?
I think the answer is "NO", the Portal time-out would not apply in that scenario. My assumption is that in our solution-path, the Portal's 100 second time-out rule would ONLY apply to the process of the Portal invoking the iView request - and opening the frame for the CR4E content.
Once the frame is open - and the RPT / Prompt-Screen is loaded the Portal time-out is "happy".
After that iView -> BO frame is established....so, even if the CR4E & BW Query took more than 100 Seconds to return/display the data - the SAP Portal would not time-out - as all of that activity is actually taking place at the BOE Platform layer within the frame (and using the time-out settings at the BOE level).
Can anyone confirm that my assumptions are correct, or explain where the assumption is wrong..?
Thanks in advance...!

In our scenario, the SAP PORTAL has a 100 second time-out, but the Business Objects platform where the CR4E content is hosted has a 600 second time-out for "View on Demand" reporting.
When the SAP PORTAL opens the iView connection, it is opening the CR4E content in a frame on the Portal. Prompts are entered - and the RPT execution begins on the BOE platform.
There is a "spinning-wheel" displayed from the BOE platform, and if run in BO LaunchPad it could run for up to 600 seconds before a time-out occured.
When it is presented in SAP PORTAL via iView connection - does that "spinning-wheel" from BOE Platform provide enough of a "heartbeat" to let the PORTAL know not to drop the connection at 100 seconds....?
My reasoning is that SAP PORTAL should be opening the BOE content with the same rules that apply when the report is opening in the BO LaunchPad.
We are going to create a "SLOW" report in CR4E (*Lots of charts & sub-reports) to test/compare LaunchPad and Portal display of the same report.

How to change time out settings in Analytic Provider Service...

... or how to disable automatic disconnect between APS and essbase server (using XMLA interface).
First a short summary:
We would like to use a third party product to analyze data (DeltaMaster from Bissantz). This product uses the XMLA interface provided by Analytic Provider Service. Mostly the connection works, I can choose one of our cubes, sometimes a drill down is possible, but sometimes the following error occurs:
"Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: (1042006): Network Error [10061] Unable To Connect To [entwgdw.hres.de:33769]. The client timed out waiting to connect to the Essbase Agent using TCP/IP. Check youer network connections. Also please make sure that Server and Port values are correct [...]"
I have already talked to the Bissantz support concerning this issue and the recommended me to increase the APS time out settings and/or to disable the automatic disconnect between APS and essbase server after every query.
The question is: Is this possible and if yes: How and where can I change these settings???
Kind regards
André

You could look at updating the essbase.properties file in the APS installation directory.
olap.server.netRetryCount=600
olap.server.netConnectRetry=3
olap.server.netDelay=200
olap.server.netSocketTimeOut=200
Update then restart APS
Though this might not be the issue if on windows, it may be down to the amount of ports being used, have a read [here |http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html ] for a possible fix.
Cheers
John
http://john-goodwin.blogspot.com/

Ipod nano 3rd gen TV OUT settings

i just got a new ipod nano...and i want to play a video on the tv from the ipod using a regular av cable, i switched the colors like everyone else did, i also left it the same...i cant change the TV OUT settings..i clicked all the buttons and it still says OFF...whats the deal???
Message was edited by: st0ked
null

With the 3rd gen iPod nano's the tv out function only works when connected to a compatable cable through the dock connector. Or you can put the nano in an universal dock and the use the line out and an av cable (yellow/red/white plug type). Either way the tv out function will only change once it it connected to either the cable or dock and only through the dock connector on the ipod. The 5th gen iPod was able to use the av cable through the ear bud jacks, but not the new nanos unfortunately.

Time Out Settings in OSB

Hi All,
I have a service which calls DB via DB adapter. For the webservice call, I have an option of read time out settings in the business service, so that it will get time out after the configured time period.
But for the DB call I dont have this option in the business service and we are getting stuck thread exceptions when the legacy is taking more time to respond back. We have a requirement that all the services realted to DB call have to get time out when the legacy takes more time.
Kindly help me in doing this.
Thanks and Regards,
Prabhu

Hi Anuj,
I did a sample stored procedure which will wait for number of seconds which we send as input and will send the success repose after the number of seconds.
StoredProcedure:
create or replace
procedure sleep (seconds in number,response out varchar2) as testdata number;
begin
testdata := seconds;
dbms_lock.sleep(testdata);
response := 'SUCCESS';
end;
Business Service XML:
<?xml version="1.0" encoding="UTF-8"?>
<xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:jca="http://www.bea.com/wli/sb/transports/jca" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ser:coreEntry isProxy="false" isEnabled="true">
<ser:binding type="SOAP" isSoap12="false" xsi:type="con:SoapBindingType" xmlns:con="http://www.bea.com/wli/sb/services/bindings/config">
<con:wsdl ref="Sleep2/Sleep_dbBS"/>
<con:binding>
<con:name>Sleep_ptt-binding</con:name>
<con:namespace>http://xmlns.oracle.com/pcbpel/adapter/db/Application1/Project2/Sleep</con:namespace>
</con:binding>
</ser:binding>
<ser:monitoring isEnabled="false">
<ser:aggregationInterval>10</ser:aggregationInterval>
<ser:pipelineMonitoringLevel>Pipeline</ser:pipelineMonitoringLevel>
</ser:monitoring>
<ser:reporting>true</ser:reporting>
<ser:sla-alerting isEnabled="true">
<ser:alertLevel>normal</ser:alertLevel>
</ser:sla-alerting>
<ser:ws-policy>
<ser:binding-mode>wsdl-policy-attachments</ser:binding-mode>
</ser:ws-policy>
</ser:coreEntry>
<ser:endpointConfig>
<tran:provider-id>jca</tran:provider-id>
<tran:inbound>false</tran:inbound>
<tran:URI>
<env:value>jca://eis/DB/SleepConnection1</env:value>
</tran:URI>
<tran:outbound-properties>
<tran:load-balancing-algorithm>round-robin</tran:load-balancing-algorithm>
<tran:retry-count>0</tran:retry-count>
<tran:retry-interval>30</tran:retry-interval>
<tran:retry-application-errors>true</tran:retry-application-errors>
</tran:outbound-properties>
<tran:all-headers>false</tran:all-headers>
<tran:provider-specific>
<jca:jca-file ref="Sleep2/Sleep_db"/>
<jca:adapter-name>Sleep</jca:adapter-name>
<jca:adapter-type>DATABASE</jca:adapter-type>
<jca:always-use-wsdl>true</jca:always-use-wsdl>
<jca:connection-mode>managed</jca:connection-mode>
<jca:outbound-properties>
<jca:operation-properties>
<jca:operation-name>Sleep</jca:operation-name>
<jca:spec-properties>
<jca:property>
<jca:name>ProcedureName</jca:name>
<jca:value>SLEEP</jca:value>
</jca:property>
<jca:property>
<jca:name>QueryTimeout</jca:name>
<jca:value>2</jca:value>
</jca:property>
<jca:property>
<jca:name>GetActiveUnitOfWork</jca:name>
<jca:value>false</jca:value>
</jca:property>
</jca:spec-properties>
</jca:operation-properties>
</jca:outbound-properties>
</tran:provider-specific>
</ser:endpointConfig>
</xml-fragment>
When I run this from the business service, if I give the input as 10, we are getting error only after 10 seconds not in the query time out seconds. But the thing is we are getting error. If we set the time as 11 seconds we are getting success response. But our requirement is the procedure has to time out in the specified seconds. Kindly correct me if I am wrong.
Regards,
Prabhu

When will ios5 be out in newzealand

When will ios5 be out in nz

There is no way to know.
Apple does not announce such things.

When do IOS5 come out? My headphones broke so is there a way i can get yall to send me new ones. mine just stopped working.

when do IOS5 come out? My headphones broke so is there a way i can get yall to send me new ones. mine just stopped working.

Ios 5 comes out Wednesday.
We are iphone users just like you. We can send you nothing.
The headphones are covered by the same warranty as the iphone. You could contact Apple and get them replaced, if they are defective.

Load Balancing Time Out Settings

Hi, getting error below and I'm sure its to do with Time Out on Load Balancing, anyone confirm as don't want to mess around with IIS...
The average of the most recent heartbeat intervals [499] for request [Ping] used by clients is less than or equal to [540].
Make sure that your firewall configuration is set to work correctly with Exchange ActiveSync and direct push technology. Specifically, make sure that your firewall is configured so that requests to Exchange ActiveSync do not expire before they have the opportunity
to be processed.
For more information about how to configure firewall settings when using Exchange ActiveSync, see Microsoft Knowledge Base article 905013, "Enterprise Firewall Configuration for Exchange ActiveSync Direct Push Technology" (http://go.microsoft.com/fwlink/?linkid=3052&kbid=905013).
Currently timeout is set to 5mins on LB...
Thanks!

I'm talking about Health Check Time Values below;
http://blogs.vmware.com/vsphere/2012/11/load-balancing-using-vcloud-networking-and-security-5-1-edge.html
Parameter
Description
Interval
Interval at which a server is pinged.
Timeout
Time within which a response from the server must be received.
Health Threshold
Number of consecutive successful health checks before a server is declared operational.
Unhealth Threshold
Number of consecutive unsuccessful health checks before a server is declared dead.

Phase out settings at a higher level such as brand or major customer

Have any of you ever setup phase out assignments at a higher level than product and had it work correctly? For example, we want to phase out a brand for a major customer. In other words, a customer is dropping a brand and we don't want statistical forecast generated for that brand customer combination any longer. I am able to setup the fields in phase out lifecycle settings for product, brand, major account but when i enter the brand and major account I am still getting forecast generated. It appears to stop for some products within the brand but not all. Another example is if a customer quits ordering from us I want to setup the major customer to phase out so no forecast is generated.
If you have done this successfully please let me know. Or if you would handle these situations in a different manner other than phase out please let me know. We can do historical adjustments each period but that is a lot of maintenance to do after each period before statistical forecast is generated.
Thanks
Steve

Hi Stephen,
Life cycle planning works only at the detail level (each CVC), the option of aggregate planning is helpful if you want to phase in or out a certain CVC when you are forecasting at the aggregate level.
One option is that you should have all products in the "profile assignment for life cycle " section which falls under that brand and customer. you can maintain a file and then automate the upload process in to the "assignment"
or
you can try to use the copy functionality in the realignment (/SAPAPO/RLGCOPY) , where you maintain copy factor as NIL and when the stat fcst is generated, you can use this as the next step to zero out -but you would need to maintain them manually.
or
easiest and safest wayy would be create a selection for those combination and do not include them in the planning job for stat fcst.
or
you can build a customised program to access the PA, PB, Data view and input the selection to zero out the stat fcst KF for that particular selection after the stat fcst run. here you would need to check if the diaggregated values are good enough.
hope it helps.

Back Ground Job- Lay out settings

Hi Frnds,
We will be executing some big reports in the Back ground , now before executing the report i have to select the Lay out , is there any option for this .??
And when i execute the report in back ground i get the data Page wise , but when i execute the report in foreground , i get the report continuous in one page .
Is there any option of getting that report continuously in one page when i execute in back ground ??
Regards
Rakesh

Hi Rakesh
Output of background program are totally based on Printer settings you have selected.
Take help of your BASIS team to configure a new printer specially for background job, which can display full report in one page.
Basis team is only responsible for it.
try and revert

Time out settings in a proxy

Hi ,
I am calling a Proxy from a Function module... now the requirement is: if proxy exceeds the set execution time, we need to kill the process and send a message to the user.
Can we set a time out in Proxy? If so, Please let me know the configuration settings for that?
Can we set the time out programatically or dynamically to kill the proxy?
Thanks & Regards,
Pavan.

Check this out ..This might solve ur issue
kill RFC session

IOS5 TV Out Settings?

Similar Messages

Maybe you are looking for