IOS6 unable to toggle flashlight on/off while recording videos

Ever since upgrading to iOS 6 from 5 on my iPhone 4S I am unable to toggle flash/on or off while I am recording videos. In previous iOS versions I was able to record and toggle the flash to on or off as I see fit without having to stop the recording.
is there something I am missing here?

I do not hold out much hope for the popup solution.
Popups are a problem because they have no background, and that is the only place you can put graphics that are not subject to the highlight limitations.
But Blu-ray highlights are higher bit depth. Make sure you select rich color in menu properties. I do NOT know if this applies to popups, but I think it should.
http://helpx.adobe.com/encore/using/button-subpictures-highlighting.html
"Encore supports 8-bit color in subpictures for Blu-ray disc menus. You can export 256-color menu subpictures for Blu-ray. In addition, you can export full original colors for menu button highlights in Flash.
To export subpictures in full original colors, select Export Highlights in Rich Color in the Menu Properties pane. Encore displays menu highlights with full colors in Menu Editor.
However, Encore only displays two-bit DVD colors in the Preview panel. If you do not enable this feature, Encore exports menu highlights in two-bit colors for Blu-ray and Flash."
What is our client really trying to do? If it is a promo piece, you would normally have the logo etc in all the time, or at particular points that are determined strategically. Perhaps he/she can't make up their mind? I would also consider a 3 video version: with, without, and strategic on/off.

Similar Messages

  • Why my iphone 5 turns off  while recording videos ???

    please help !!!!! i m extreamly disappointed in apple ;[

    Hello Dhananjay,
    I recommend steps 1, 3 and 5 of the iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/.
    If you get to step 3, then I suggest closing all the apps. Here is step one to get you started
    Restart iPhone
    To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
    Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
    Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
    If your device does not turn on or displays a red battery icon, try recharging next.
    All the very best,
    Sterling

  • BluRay: Toggle logo on/off while video plays

    Hello,
    Short Description of my situation: our company currently produces an image-video for a big energy-provider. the client asked me, if he could have one plain version of the video and one with the title of the film in the lower right corner and the companys logo in the upper left corner.
    Now i thought with BluRay and PopUp menus and all there has to be a way, that the client can toggle the logo and the title on and off, while the video is playing… I had three ideas how to approach this:
    Treat the logo as a subtitle file
    I learned, that it is possible to import a simple graphic as a subtitle script, i tried this for hours yesterday and actually succeeded, but the image quality was so unbearably bad, that i had to discard that approach.
    Afterwards i read in two different forums that it is simply not possible to achieve a better result at the time, but if anyone has an idea, how that could work good for me i would be very grateful. the logo is only one color, but it would have to be sharp.
    Import four different videos: a plain one , one with the logo, one with the title and one with both. this could work, because the video is only about ten minutes long. The problem is, that i don't want the video to start from the beginning, every time the client wants to add the logo for instance, but keep on playing seamlessly( or NEARLY seamlessly) Do you know, if that is possible in Encore CS6??
    Somehow treat the logo and the title as a PopUP menu. I could imagine that to work for me, though i think its not the perfect solution, since i don't know if the client can use the chapter buttons while in a PopUp menu, if the menu would disappear unwanted at some point or if it would be possible for the client to chose one version of the video from the start menu and so on.
    I am not that advanced with Encore yet, especially not with PopUp menus, since there is no proper way to preview them in Encore. I am currently searching for a mac software that can emulate PopUp menus. Dear mister Stan Jones already told me about Arcsofts TotalMedia Theater, but i can't seem to get the trial version to work via crossover and i have no windows machine available...
    Do you guys think, that Pop Up menus could work for me in this case??
    I know that this effect is not necessary, but i think it would be a nice thing, also for future projects...
    Any suggestions would be much appreciated
    Have a nice day,
    Nigi

    I do not hold out much hope for the popup solution.
    Popups are a problem because they have no background, and that is the only place you can put graphics that are not subject to the highlight limitations.
    But Blu-ray highlights are higher bit depth. Make sure you select rich color in menu properties. I do NOT know if this applies to popups, but I think it should.
    http://helpx.adobe.com/encore/using/button-subpictures-highlighting.html
    "Encore supports 8-bit color in subpictures for Blu-ray disc menus. You can export 256-color menu subpictures for Blu-ray. In addition, you can export full original colors for menu button highlights in Flash.
    To export subpictures in full original colors, select Export Highlights in Rich Color in the Menu Properties pane. Encore displays menu highlights with full colors in Menu Editor.
    However, Encore only displays two-bit DVD colors in the Preview panel. If you do not enable this feature, Encore exports menu highlights in two-bit colors for Blu-ray and Flash."
    What is our client really trying to do? If it is a promo piece, you would normally have the logo etc in all the time, or at particular points that are determined strategically. Perhaps he/she can't make up their mind? I would also consider a 3 video version: with, without, and strategic on/off.

  • Battery problem while recording videos.

    I got my ipod touch 5 1 month ago. I got a problem while recording videos. The battery was around 40 percent, but after I recorded a video for about 1-2 minutes. The 20% was popup, then it turned off automatically. While I turn on it, the battery will be about 30 percent. It happened several times. Is this normal?
    Does anyone have the same problem?
    Thanks!

    Hi,
    Please refer the below link...
    http://www.sapfans.com/forums/viewtopic.php?f=27&t=20842
    Kuber

  • Can we take photos still while recording videos on iphone 4s on ios 6??

    Can we take photos while recording videos on iphone 4s using ios 6??

    1. Open the camera app.
    2. Move the slider from in the bottom right from photo to video.
    3. Begin recording your video.
    4. While your video is recording, tap the camera icon in the upper right to take a photo.
    5. You'll see the shutter close on your screen each time you snap a photo.
    6. Your photos will be saved to your camera roll.
    Edit:
    Just noticed you have a 4S...iPhone 5 only, sorry.

  • While recording videos in iPhone 5, I am not getting sound playback.

    While recording videos in iPhone 5, I am not getting sound while playing it. How to resolve this issue? Please help. Thank you.

    Hi manu1982,
    Welcome to Apple Support Communities.
    It sounds like your iPhone has a no sound from the speaker issue. The article linked below provides a lot of great troubleshooting tips that may be able to resolve the issue.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    I hope this helps.
    -Jason

  • Stereo Audio Record problem (While recording video as well)

    Hi,
    I just just bought Sony Xperia C3 dual yesterday. I'm having problem with audio recording. I installed the Sony audio recorder from Google play store but while recording in stereo mode with it the gain suddenly drops after 1/2 second(s). Same problem while recording a video with stock camera app as well, video quality is fine but the audio with it is,just worst. Tried third party app like regorge pro but faced the same problem. Tried disabling the AGC with it, but no good. Recording in mono mode just works fine and I get clear record.
    Any solution?
    Thanks.

    @uliwooly  This one i recorded today morning. The audio starts good & clear at the begining but just after one second it drops & then you can hear the bus engine sounds like waterfall. Here is the youtube link https://www.youtube.com/watch?v=5H1jNxyYMlw Here's another video uploaded by a review site with the same problem https://www.youtube.com/watch?v=z3vKwydfN6U & more from youtube https://www.youtube.com/watch?v=-GLLj2ommP4  then i used a third party audio recorder with mic switch option https://www.youtube.com/watch?v=D6d4uAEZFRE as usual with the rear mic the gain suddenly drops after second & you can hear some weird sounds like a "movie bomb" sound at 00:04, "rattle snake" sound at 00:05 & 00:12 & with the front mic starts at 00:17 you can hear the difference. It's mono but so clear & sharp.  Finally, as i dont have the mic swith option while recording video, all videos i record will have the same problem. This is definitely not  the typical "sony" thing to carry on.

  • Shooting stills while recording video with the SX50

    Has anyone done this?  I was shooting some video yesterday and was happy with how it came out until I realized that pressing the shutter button while recording video actually caused the video to insert a black frame and included the shutter sound.  What is this?
    My Kodak Z990 was able to do this same function (take pictures during videos) and even though some of them would turn out a bit blurrier than I would have liked, it never insert a black frame and sure didn't stick the shutter sound in there.  Did Canon do this on purpose?  I'm going to have to try and pull this video into some video editor to remove the frame and sound and hope it works.
    Lesson learned, I guess.  I'll take pictures and video separately from now on, just in case, but it's unfortunate that Canon screwed up badly on this feature.

    Charleyhorse,
    The items you mentioned need to be set before you start the video. Once the G16 is running the video, you cannot make adjustments to white balance, ISO, etc. The people I deal with all run the video for their G16's in Auto mode and let the camera make the decisions. But like myself, they don't use video very often, so hopefully someone with video experience on the G16 can give some better insight.
    Steve M.

  • How do I mute internal microphone while recording video in new ipad

    Is it possible to mute internal microphone while recording video in new ipad

    No. There is no setting to mute the mic.

  • Why can't I take a picture while recording video on iPhone 4S with iOS 6.0

    I have an iPhone 4S running iOS 6.0 and I've read the user guide, but cannot seem to get it to take a picture while recording video.

    1. Open the camera app.
    2. Move the slider from in the bottom right from photo to video.
    3. Begin recording your video.
    4. While your video is recording, tap the camera icon in the upper right to take a photo.
    5. You'll see the shutter close on your screen each time you snap a photo.
    6. Your photos will be saved to your camera roll.
    Edit:
    Just noticed you have a 4S...iPhone 5 only, sorry.

  • Phone call while recording video

    I realized yesterday that if I am recording a video and I receive an incoming call, my phone stops recording. Is there an option to hold all calls while recording video?

    Not that I ever heard of.
    Apple's stance is that it's primarily a phone, so those take priority over video recording.

  • Keyboard backlight does not turn off while watching video

    I just discovered this issue on my new macbook air (haswell). I also found a thread on it here from back in 2009, apparently it's been an issue for 4 years!!!???
    In that thread people noted that if the backlight is set to anyhing more than 5 seconds, the backlight won't turn off while watching a video, but at 5 seconds, turns off fine as it should.
    Anyone have any ideas? Just seems like it needs to be taken seriously by Apple and fixed in a future OSX update.

    Try resetting your SMC:
    Resetting the System Management Controller (SMC) - Support - Apple

  • Useless microphone while recording videos.-.

    My iPhones microphone is not working when I play the recorded videos from my device all I hear is loud cracking sounds and faint voices, while doing Skype and regular cellular calls and voice memos it works absolutely normal but when it comes to recording videos it becomes useless.

    Hi Dcypha13,
    Thanks for visiting Apple Support Communities.
    If one of the microphones on your iPhone is not working, I recommend these troubleshooting steps:
    Make sure nothing is plugged in to the jack connector.
    Make sure nothing is blocking any of the microphones (see the pictures below to locate the microphones on your device)
    Make sure none of the microphones is obstructed by dirt or debris.
    Turn the iPhone off and then on.
    Make sure that the latest version of iOS is installed.
    If necessary, find general iPhone hardware troubleshooting suggestions.
    For further assistance, contact Apple Support.
    You can find these steps and more information here:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Best,
    Jeremy

  • Microphone doesn't work while recording video

    Hi everyone. I have an iPhone 5, and yesterday while trying to make a Vine while using the front-facing/FaceTime camera, I discovered that it didn't pick up any sound. However if I switch to the main camera (the HD one on the back), audio picks up and can be heard. This is a problem when I'm recording regular video too. Microphone works with the back camera, doesn't work with the front. Is there any way to fix this?
    Thanks!

    My iPhone 4S fails and works exactly the same every time:
    FAILS, with the phone on speaker, or with the camera recording video (front or back) no sound is captured.
    WORKS, in all other situations and apps that I could think of that use the microphone such as
    google, Voice Memo, Dragon Dictation, Vonage Extensions, Skype, and taking the phone OFF speaker holding the phone to my ear.  And also select microphone key to voice input instead of typing whenever the keyboard is there (Mail, Notes, Reminders, Safari, Maps, google Maps, ...)
    Based on that, my guess is it's not hardware.
    I'm using a 4S (64GB) from Verizon. In the nearby Verizon store I was told to back it up, do a master reset (which wipes out the phone), and restore it from the backup.  I called Verizon support today before doing this and got exactly the same instructions.  That's what I did today and NOTHING GOT BETTER.
    After reading several discussion boards I made sure that I was not blocking any of the holes (trying to be thorough). I do not use a cover.

  • Screen freezes while recording video.

    Screen freezes while recording. I'm recording a video from Safari 7.1 using Quick Time Player 10.3 in OS10.9.5. The picture freezes after about an hour and a quarter. I'm using SoundFlower to capture the audio; the audio continues to flow and record while the picture remains static.

    Hi again, I have found a solution for this! Go to the video in your iTunes library, and right click. Go to "Options" and then uncheck "Remember playback position". Once I did this the videos all played fine on my iPod.. they just won't keep track of where you left off. Hope this helps you both as well!

Maybe you are looking for

  • Unable to install Vista OR XP (SP2)

    Any help is appreciated here. I've been running this Imac for months with dual boot via boot camp and have had no issues. Suddenly, last week, Vista will not boot. Missing file boot/bcd error Due to my frustration, I figured I'd wipe Vista and reinst

  • Monthly Sales By Sales Employee

    Hello All! Is there any report that shows Monthly sales by Sales Rep.  So basically, consolidating all invoices for a rep by month. The headers would look like this: Sales Rep...Jan...Feb...March...April...etc. Total Thanks! Mike

  • How to link a radiobutton with a text field

    Hello, Say for example I have this kind of selection screen: (radiobutton 1) textfield1 (radiobutton2) textfield2 and so on, where textfield is something that user can key in some text. I am wondering whether it is possible to have it work in such a

  • Instant alert messages

    Hi, I am sending the alert message on a button click to another user and it works successfully whenever another user login to SBO. But in addition to it i need to know that if these alerts could be send to another user instantly or could we set the f

  • IDOC reprocessing including conversion rules

    with BD87 you can reprocess a IDOC, which was not properly processed because of any reasons. For me it looks like that using BD87 conversion rules maintained for the IDOC message type are not reprocessed again. Is there any way to force the system to