IP: How to hide currency/unit from input-ready query headers?
Hi,
Is there a way to hide currency/unit from input-ready BEx web query headers? I've used NODIM-concept for read-only reports, but with input-ready it won't work since formulas cannot be input-ready. Is there a setting somewhere or workaround? The web query is published by WAD.
Thanks!
Aki
Hi Aki,
If you wanna do this in input-ready query, there is only one scenario: you restrict 0UNIT and 0CURRENCY as one certain constant value for the 'Characteristic Restrictions' in the 'Filter', and DON'T set the according 'Can Be Changed at Execution' selected. Then the 0UNIT and 0CURRENCY can be put into 'Free Characteristics', no neccessary moving them to data area.
If there're multiple value for 0UNIT or 0CURRENCY for your planning, you can't hide them in data area of INPUT-READY query, since they belong the dimension 'U'.
Hope this will help.
Gerald
Similar Messages
-
Hide currency in input ready query
Hi gurus.
I want to hide the currency in one input ready query; I do it with the NODIM instruction but after that the query is input ready anymore.
Anyone has a solution?
Thanks in advanceHi,
since currency is connected with the key figure, you can not get rid of it.
We use 2 approaches:
a) if we do have refenrence data including currency - we show booked data in the query, have currency in the lines and hide it (no display).
b) if we don´t have refenrence data, we use a key figure for input which is just a number without curency and have a function in the background (ususally started when saving button is pressed) which derives the currency i.e. from cost center and populates the real key figure
regards
Cornelia -
Input Ready Query without unit / currency
HI ,
In my input ready query, it is enabling along with the unit / currency. How to show the input ready query without unit / currency
if I use NODIM() function, it is not possible to creating input ready field.
Please suggest me is there any way to create input ready field without unit / currency.
Thanks and regards
RajeshHI Hyma,
1.use the currency / unit field in the filter or drilldown
In this case if the query may have more than 2 fileds which are input ready having differnt unit/ currency, for Ex: Amount = Quantity * Rate
Currency for amount and Rate is INR and for Quantity is Tonnes. if I restrict both INR & TO in filter, in the system it will store both currency and unit for amount, rate and quantity.
HI Andrey,
2. 0CURRENCY or any currency IO that you use in ROWS of query
In this case also, if I use only one type of currency/unit as input ready then it is fine,, but in my query I want to use more then one currency/unit at a time.(As above Example)
Please suggest me how to solve this...
Regards
Rajesh -
How to include more than one input ready rows in analyzer
Hi Gurus,
I have a requirement that, I need to have more than one input ready rows at the end of the query output in analyzer.
Normally it will show only one row as input ready at end of the query result in any manual planning analyzer., But my requirement is to have multiple input ready rows in analyzer. Is it possible in workbook/analyzer?.
Thanks,
V.SenthilHi Senthil,
Have a look at the below thread.
How to add new rows for input ready query in BEx analyzer
Regards,
Venkatesh -
Input ready query and display only rows
I am trying to replicate scenario which is equivalent to creating manual layout in SEM-BPS with settings for layout category - Key Figures in Data columns, and rows defined individually. In this version it is possible to restrict certain rows as comparision only.
How can I acheive this using Input ready query? In my query I have created a strucure for Planning Items, but I am not able to show certain planning item selections as display only.
Any thoughts?Hello Gregor,
Thanks for you answer.
I already have two structures as mentioned by you.
Can you please let me know what exactly you meant by set the input flag on the cell level? What settings I have to change to set the flag, do I have to use any formula? In my example I have three rows for Planning item row structure and I want only one row to be selected as display only row.
Regards,
Sachin -
How to hide a field from table maintenance view?
Hi,
How to hide a field from table maintenance view?
The field is used for data created date. I need to hide it from display.
ThanksChk this link.
http://help.sap.com/saphelp_nw04/helpdata/en/66/33f52010dd11d6999300508b5d5211/frameset.htm
Maintenance Attributes
You can assign a maintenance attribute P to individual fields in the maintenance view definition in the Dictionary (SE11). It can be H (hidden)
H (hidden)
A field flagged H is not displayed on the screen. This field must also be filled in the background by a routine at an event.
The system writes R and H fields to the database like all other fields when a new data record is saved. -
Hi Dear All,
We have two real time infocubes and two aggregation levels based on these cubes in one multiprovider
first cube1 is like
char1| char2| keyfig_coefficient(single value for each combination of char1 and char2)
same aggregation level1
(we have input query to fill coefficients by one responsible user)
second cube2 is like
char1| char2| keyfig_quantity| keyfig_result
same aggregation level2
Input ready query should be like (for all other users of different org units)
char1|char2|keyfig_coeff| keyfig_quant(for input) | keyfig_result = keyfig_coeff*keyfig_quant(calculated value, should be saved to cube2)
And we don't have pregenerated lines in cube2, users have to add new lines themselves by wad.
Question is, what is the optimal (easiest) way to make calculation and save result data to cube2 where keyfigures for calculation should be used from different infoproviders. I need just a hint.
Appreciate any help.
Nadya.I found decision, agregation levels sould be based on multiprovider, not included.
-
How to handle currency & unit fields in call transaction?
Hi,
Can any one tell me How to handle currency & unit fields in call transaction? & how to dael with error for this fields? whith some sort of coding.
Thanks In Advance.
PravinHi Pravin,
The same topic has been discussed in the following thread:
How to handle currency & unit fields in BDC recording method?
Regards,
Chandra Sekhar -
How can I do this input help in the Input ready query
Dear all,
Do you konw this function?
The following steps is that:
1,I create the Input ready Query.
2,I can insert the new record.
3,I can use the input help for the characteristics.
4,When I double the space, I got the pop-up for input help.
5,I want to get the function is that:
for example:
char1 is the char2 attribute.
char2 - - - - - - - -- - char1
m- - - - - -- -- - - - -a
n-- - - - -- - - - - - a
u- - - - -- - - - - - - -a
v- - - - - - - - - - - -b
w- - - - - - - -- - - -b
x- - - - - - - - - - - - b
when I write the "a" for the char1 in the new record at input ready query, I only want to got "m","n","u" for char2 from the char2 input help.
How can do it?
Thank you so much.
Best regards,
LeonHello Leon,
As you have already set char1 as an attribute of char2, what you would need to do is create an attribute variable for char2 of type exit.
Using a variable exit, you can pass the value of char1 to char2. This would then automatically restrict the selection list to "m", "n", "u" as values for char2 when you enter "a" as the value for char1.
Hope this helps.
Sunil -
Input ready query / derived currencies
Hi all,
I have an issue regarding an input ready query with multiple currencies:
The query should enable the input of plan values for several reporting units, each with its own local currency. If I restrict the currencies using variables, I naturally get all possible combinations of currency and reporting unit as input ready. This allows the user to make wrong entries and is not very user friendly.
I wanted to restrict the currency using characteristic relationships but encountered several issues:
- Local Currency can not be chosen as attribute or DSO based characteristic relationship in the Modeler.
- when using a char. rel. based on CL_RSPLS_CR_EXIT (derive method) I receive the error msg "Cannot generate combinations in step '04'" everytime I restrict local currency to generate combinations based on char. rel. rather than master data in the query.
Do I have to implement the create method of the char. rel. exit? If yes is there some documentation available? Or could somebody give me an advise for an alternative solution?
Thanks,
ViktorHi,
I think this works out of the box.
Assume the characteristic 'reporting unit' has a currency characteristics containing the local currency as an attribute. Both, the 'reporting unit' and the currency characteristic have to be in the InfoCube and aggregation level used for the input-ready query. Create a characteristic relationship of type attribute containing the above characteristics and use 'access mode for result values' based on characteristic relationships for both characteristics in the query. But both characteristics e.g. in the rows of the query and you should only the valid combinations of 'reporting unit' and currency.
Regards,
Gregor -
Unit Conversion in Input Ready Query
Hi Experts,
I need to do unit conversion in Input ready query. here is the requirement.
I have 3 columns in report, 'Year to Last Month', 'This Month' and 'YTD'. In this, 'This Month' is input ready. and YTD is sum of the first two collumns. I have a variables 'This Month' and 'Unit'. User may enter units either in Litres and HectoLitres. depends on the user input, i should get the values converted to corresponding units.
currently, if i use Litres, i am able to get the result in Litres, when i select in HectoLitres, i should be able to convert the values in HL. please let me know if this possible and how.
Thanks in advance!
Best Regards,
Ali.Hi,
You can try unit conversion planning function,create planning function and add it at the back of button.
Can refer to link below:-
Not sure if it can solve your problem.As it also depends upon source and target keyfigure used.
http://help.sap.com/saphelp_nw70/helpdata/en/44/21643cedf8648ee10000000a1553f7/content.htm -
How to set input ready query to display mode and set edit mode in WAD?
when I create A input ready query but not set query propery start query in change mode ,but I want to set this query in input ready mode ,how to set this in WAD?
hope anyone can help me
regard by
wenlongHi,
You can get all the info from this thread , try it out
WAD - set data entry mode
Hope it helps.
Regards,
Priya. -
How to get Input-Ready Cell Value of Input Ready Query?
Hi,
How to get input ready cell value in fox formula?
for example :
In Input-Ready Query,
C_Code Month Psale(input ready)
1000 05.2012 800
now i want Psale 800 in fox formua before value save in cube,
is it possible?
Thanks
RaviHi,
as I understand your requirement: you want to execute a planning function before 'save'. This possible, cf. note 1356805
for more details.
Regards,
Gregor -
How to allow users to record new lines in an input ready query?
Dear All,
I am using BI integrated planning (NW2004s) and I would like to create an input ready query with account numbers in the rows. I drag 0ACCOUNT into the line field in the BEx Analyzer which has many individual values in the relevant filter.
I do not want to show all possible account values in the rows automatically (there are too many accounts) but I would like if the user write the desired account numbers by hand or select them from a list of possible values.
In summary, I would like to create a solution similar to a BPS Layout where the characteristic combinations are 'From Transaction Data'.
Is it possible to create an input ready qurey in such a way?
Thanks in Advance,
DezsoHi Dezso,
Yes,
If you want the query to work like a "from transaction data" layout. Goto the extended tab on the charicteristic 0account and change the setting under "Access type for result values" to "Posted values" Then only lines with posted values will appear.
M. -
How to set input ready query to display mode as default when open workbook?
Dear All,
Hi, i have a question here about IP query.
as my current situation, my workbook included one input ready query, therefore, when i open my workbook which default is Edit mode which mean all value can be edited.
but, i want it to display mode when open workbook, and i already have a edit button, if i want to edit the value i will use Edit button, so, i wan it as display mode when i first open workbook.
so, can anyone tell me how to set it as display mode when open workbook which included input ready query?
Regards
wenlong
Thanks a millionin Data Provide Specfici commad
Edit
Dsiplay
Filter command
Assigen Query /Query view
pls select Edit then save
Maybe you are looking for
-
Wrong routing selection in production order creation via MILL_OC
Hi, We are using the order combination functionality (MILL_OC) We have a product with alternative routings. Situation is as follows: - Create 2 plan orders for the same material - Execute MILL_OC When I execute the MILL_OC transaction I get the reque
-
Copying table data accross a dblink using dbms_datapump
Hi Friends, I need to copy a table data accross a dblink into another table of same structure. There is a requirement to use 10g dbms_datapump package to copy the data. The problem is that I can export into a dump file and then import it into the oth
-
Picture this. You have a real photograph in front of you. Its dimensions are 7x5 inches, and you want to cut out of that photograph, a 4x4” square. You’re not bothered by the rest of the photograph, you’ll discard that, so you mark your 4” square
-
My Apple ID is not recognised by iCloud. ???
I am unable to connect to iCloud as it does not recognise my Apple ID as an iCloud ID. This affects my iTunes downloads!
-
Hi Experts, I am not getting the actual output when i trigerred Portal Activity iview...... For ex: If I am looking for Number of logged in users .....it always shows Zero....... Even for the number of entries made in iview..getting the same value ze