IPad 2 is not responding. Has picture of apple then a small ring and then nothing happens
iPad has frozen. Apple picture with loading ring around
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank. Be patient, the device will power ON again in the normal way. It is app and data safe!]
Failing that, see here http://support.apple.com/kb/TS3281
Similar Messages
-
My ipad mini will not power on. I have tried to reset it and still nothing
My ipad mini will not power on. I have tried every reset known to man. HELP!!!
Hello Kwcuzzy,
The following article may be helpful in getting life restored to your iPad Mini.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen -
Help? My iPad 1 will not respond. Have tried basic troubleshooting.
My iPad original will not respond. I have attached it to my iMac and update the software and ensured it's fully charged. I have tried to reset it by holding both buttons for more than 10 seconds. The screen remains black.
Does anyone have any ideas what I can do myself? Otherwise I'll go to my local Apple Store.
Thank you.You're welcome.
If there was something you could do yourself besides what I provided, I would have provided it. -
IPad touchscreen is not responding even if I did the restart procedure.
iPad touchscreen is not responding even if I did the restart procedure.
Hi AngusZ,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
iPhone, iPad or iPod touch: Not responding or does not turn on
Resolution
Follow the appropriate steps for the symptom you're experiencing.
If a single application is not responding or stops responding when it opens, you can force it to close
If the device is unresponsive or certain controls aren't working as expected, try restarting
To turn off the device, press and hold the Sleep/Wake button until the red slider appears.
Slide your finger across the slider to turn off the device.
To turn on the device, press and hold the Sleep/Wake button until the Apple logo appears.
If the device remains unresponsive or does not turn on (or power on), try resetting Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.
If there is no video, verify that the device has enough charge to turn on
If you are using an iPad, ensure that it's connected to the 10W USB Power Adapter.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Home button to attempt to wake the device.
If the screen displays a red battery icon, let the device to continue to charge until it turns on.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode.
I hope this information helps ....
Have a great day!
- Judy -
/hi
my ipad screen is not responding. Nothing appears. It seems to turn on but nothing appears on screen.
maybe my niece of # years old that played with it entered too many tomes wrong passcode.
Anyway, how can I restaure it?
The itunes doesn't recognize my ipad since I can t enter the password.
Please help. I am desesperated
Thanks
Elinor-reset the device will not get the passcode to go away
you can restore by putting it in dfu you mode. plug it in to the computer pull up itunes, then hold down the home button and the power button at the same time, when you see the apple logo let go of the power but keep holding the home button in tell you get a message to restore -
09 I Mac goes asleep ends up with a spinning disk on the screen and the mac will not respond has to be rebooted
First this:
In EnergySaver deselect "put the hard disk to sleep when possible". You must logout after the setting to make this effective.
This probably will not solve it, but let it be deselected.
When the issue is still there:
Open Terminal;
copy/paste following command (after every command hit "enter" key)
pmset -g | grep hibernatemode
when the answer is not 3 write it down;
then copy/paste following command
sudo pmset -a hibernatemode 0
reboot
Open Terminal;
copy/paste following command
sudo rm /var/vm/sleepimage
after that type EXIT in Terminal and close Terminal.
This does following for you:
it will set the hibernatemode to zero: the sleepimage (a copy of the complete ram) will not be written and the space on the HD is freed up.
This sleepimage does not do anything for you but taking time at sleep/hibernate and startup. It is an old remnant of earlier days. -
My Ipad scree is not responding to my touch, meaning i can not open and use my Ipad2, can anyone help??
Make Sure iOS is updated to the latest version
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings -
my iPad screen is not responding, whats the best way to clean it and what could be the problem, its 2 days old
Braunzoes wrote:
my iPad screen is not responding, ...
Try a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Braunzoes wrote:
... whats the best way to clean it ...
How to Clean Apple Products
http://support.apple.com/kb/HT3226
Braunzoes wrote:
... its 2 days old
iPad User Guide iOS 6 -
Hello!
Staff of E4 Group JSC use Apple devices for call, reading email and calendars. When the user open event in calendar of iPhone or iPad, he does not see attachments (picture №1, picture №2). But it is possible on Blackberry (picture №3). How user of Apple can see these attachments? Recommend please any apps for it.Hello!
Staff of E4 Group JSC use Apple devices for call, reading email and calendars. When the user open event in calendar of iPhone or iPad, he does not see attachments (picture №1, picture №2). But it is possible on Blackberry (picture №3). How user of Apple can see these attachments? Recommend please any apps for it. -
I installed imovie on my new ipad-it is not seeing my pictures or videos in my picture roll
I installed Imovie on my IPad -it is not seeing my pictures or videos from my picture roll
Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
Cheers, Tom -
HT4061 my touch screen on my iPad mini is not responding
my ipad mini is not responding to me?
Try a soft reset by simultaneously pressing the home and power buttons until you see the Apple logo, then release both buttons. This is a good trouble shooting step since it is so easy, and you won't lose ant data.
-
IPad lock screen not responding or won't shut off
HHow can I get to work
Hey Bryan,
For most issues when your iPad is not responding, take a look at the article below to go over some troubleshooting options. Start with holding the Sleep/wake button and home button for about 10 seconds or until you see the Apple logo and test to see if it is responding. After that, if you are still having the same issue where your iPad display is not responding or turning off, then you will want to contact Apple Support to assist you further.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
https://support.apple.com/en-us/HT201412
Take care,
-Norm G. -
Ipad safari browser not responding if page takes more than 2 minutes processing time.
ipad safari browser not responding if page takes more than 2 minutes processing time. It looks like timeout. How I solve this problem. Actully this page using java script file to draw chart.
ipad safari browser not responding if page takes more than 2 minutes processing time. It looks like timeout. How I solve this problem. Actully this page using java script file to draw chart.
-
I forgot my iPad passcode, it has a different apple id than my laptop and I don't know how to restore it. i don't want to lose my pictures.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
We have multiple devices in our family. On each iPad/iPhone each user has their own apple id for iMessage, Facetime and icloud, but we all sign in to the same apple id for itunes. When one of my kids comments on my shared photostream, it shows my name and not theirs as the commenter. How do I fix that?
CREATE A NEW USER
Go to System Preferences --> Create a New User in Users & Groups
Decide on whether to setup as Admin or Standard User.
Switch to the New User by logging out under the Apple in the Menu Bar or use Fast User Switching
Fast User Switching allows other users to leave current applications and windows open. Depending on RAM, you might need to log out rather than use FUS.
Maybe you are looking for
-
Re: how to capture a frame from a video file and save it as a jpeg
package com.snn.multimedia; * @(#)FrameAccess.java 1.5 01/03/13 * Copyright (c) 1999-2001 Sun Microsystems, Inc. All Rights Reserved. * Sun grants you ("Licensee") a non-exclusive, royalty free, license to use, * modify and redistribute this soft
-
How can I sort on more than one column?
I use the Album tag for individual tracks I have imported from analogue (via Final Vinyl), so I have 000's of tracks that are tagged (e.g.) 'FV MD AAC'. When I sort by Album, I want to further sort by Artist, so all my imported music is together and
-
I cannot open Adobe XI because I apparently have an id but do not know what it is.
I cannot open Adobe XI because I apparently have an id but do not know what it is.
-
What's 'Process dimension member' and 'Refresh dimension member'
We're using BPC 7.5 NW SP8 patch 001. I often have confusion about these two buttions of dimension library on BPC admin console. When clicking 'Process dimension member' and 'Refresh demension member', clearly we see BPC is performing some activities
-
SQL report shoring report total - how to disable it
Hi, I am using a report of type "SQL report" to show monthly revenues by year... Report is showing total for individual years... my issue is that Report is also showing a grand total for all years (report total)... may I know how to get rid of report