IPad 2 with iOS 6 spontaneously closes apps in the middle of using them. Some wont even open they start working and then close immediately. How can I fix this?
After uploading new iOS 6 my iPad 2 randomly quits apps in the middle of using them and sometimes won't even open apps. What can I do to fix this?
1. Double-click the Home button to close all Inactive Apps in Task Bar
2. Hold the Apps in Task Bar down for a second or two until you see the minus sign
3. Tap the minus sign to close Apps
4. Tap center of screen to return to Home Screen
5. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo.
Similar Messages
-
My IPad keeps restarting and won't charge, I've tried restarting it but this doesn't work. Does anyone know how to fox this?
marco12345 wrote:
Please Apple, have some professional personnel respond to this message with a useful response. Not a copy & paste of your commonn reponces, I have tryed them all and don't work for this problem. iPads don't come chip and my mom's made her very happy while it worked.
Looking forward for your response!
This is an iPad user to user forum, so you are not addressing Apple.
Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good. If your computer/iTunes does not recognize the iPad, then the cable is probably bad.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- %20beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
Poor battery life after installing iOS 7.1? Try these simple tips
http://www.zdnet.com/poor-battery-life-after-installing-ios-7-1-try-these-simple -tips-7000027348/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Charging Tip - Switching to airplane mode turns off battery-draining wireless and cellular access, allowing your iPhone/iPad to recharge up to twice as fast.
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
HT4623 I have the 1st ipad 3G wifi cell 64g and it keeps crashing how can I fix this problem
I have the 1st ipad 3G wifi cell 64g and it keeps crashing how can I fix this ?
I have restored network settings and cleared history etc ..Try closing all apps and reboot the iPad. Clear Safari again as well.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Go to Settings>Safari>Clear History, Cookies and Data.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
First Issue: All of my purchased apps (games) and apps such as Weight Watchers, Facebook, WeatherBug, Sports and Pinterest, Notes, Nook, etc. are all locked up. They simply flash, then nothing! How can I fix this to make them work again? If I have to delete the purchased apps, will they still be in iTunes, or will I have to re-purchase them?
Second Issue: When I synced to my desktop (Windows XP) All my photos loaded onto my iPad2. I don't really want all 3000 + pics on my ipad!! How do I get them off? Next time I synced, they loaded again! Now I have so many duplicates! How do I get rid of the photos and prevent this from happening again?If none of your third-party apps are working, but the Apple built-in ones are ok, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted. In terms of re-downloading apps then you can do so as long as they are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519
For synced photos, then with the iPad connected to and selected on the left-hand side of your computer's iTunes, then on the Photos tab on the right-hand side you can control which photos are synced to the iPad : http://support.apple.com/kb/HT4236 . If you don't want any photos to be synced then try selecting just an empty folder. -
When I try to use Safari, I get a screen flash and then it closes. How can I fix this?
When I try to use Safari, I get a screen flash and then it closes. How can I fix this?
1. Double-click the Home button to close all Inactive Apps in Task Bar
2. Hold the Apps in Task Bar down for a second or two until you see the minus sign
3. Tap the minus sign to close Apps
4. Tap center of screen to return to Home Screen
5. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo. Ignore the red slider -
I got my iPad from my friend and he done a full restore before I got it, but know that I have put my iCloud account on here I have contacts and his too. How can I fix this problem? !!!!!
As I said in the other thread that you posted in the other forum, your friend clearly has not restored the iPad correctly. I suggest that you undertake another restore and start again.
-
I got my iPad from my friend and he done a full restore before I got it, but know that I have put my iCloud account on here I have contacts and his too. How can I fix this problem? !!!!!
Welcome to the Apple community.
Given what you've have described, your friend cannot have restored the iPad correctly. You need to decide whether you are willing to delete his contacts manually, or carry out another restore. Personally I think I would go for the restore. -
I downloaded the new iOS 6 for my iphone 4. I have 2 iphones on my account and after the "upgrade" text messages go to both phones. When I send a text to my wife I recieve the same text and vise versa. How can I fix this?
"Sounds like you guys are using the same apple id for imessage. You will need to create a separate id for you wife. OR go to settings - message - receive&send and make sure your phone number is the default for both you and yoru wife.
-
I'm trying to play this new movie i bought with my macbook but every time i put the movie in it makes a noise and only stays there for 6 seconds then ejects itself how can i fix this problem?
Restart your phone,hold the home button and the off button down till the apple symbol comes up. If that doesnt fix it , you need to do a restore in itunes by connecting to itunes , click on your phones name to the left, then click restore in the center of the screen and restore from backup.
-
please help mw fix my app i deleted my default .png file the one that displays an image when u first run the the and after i deleted my app wont run and says at the very top 0 target , missing base sdk. how can i fix this please help.
hello , i did exactly the same thing , and my app store icon look like this :
http://i.imgur.com/FIrph.png
so can you tell me how did your friend send the app store for you? please -
when i turn on my ipad and go to settings then to icloud the ipad says account not verified. what does this mean? how can i fix it? it keeps looking and looking yet does find my account.
Welcome to the Apple Community.
Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.
Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you. -
i have had itunes downloaded on my computer before but the computer had to be repaired becuase it had viruses and now i cant reinstall itunes. whenever i try to install it again something pops up that says a fatal error has occured or something like that. does anyone know how this can be fixed?
the older version of bonjour could not be removed
Let's see if we can make some progress with that one first.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
I open iTunes and I received this error message (-45054), then my iTunes closes. How can I fix this?
After the latest update I did, 23Oct2013 7:30pm PT, my iTunes no longer opens up without the error message (-45054). I click "ok" to acknowledge the message and it immediately closes iTunes with no further information. Any help would be greatly appreciated, expecially if it's an actual employee of Apple. They seem to be way to into the user-helping-user system they need to step up.
Hi,
re: the dialogue: You do not have enough access privileges for this operation Error code -45054
A fellow musican I know had an identical issue with this and asked me to check it out. I fixed it and wrote a long set of instructions on my blog. His problem was with 10.6 but it was an update he did preparing to move to Mavericks.
I was able to reproduce the error by just removing the /Shared folder from /Users
Here is the link to the problem and the instructions on how I fixed1t
http://fixed1t-mac-support.blogspot.co.uk/2013/10/fixing-itunes-you-do-not-have- enough.html
Regards fixed1t
In order to comply with this form, I must point out that the fixed1t blog site does sell cheap Garageband and sampler support software and that I will benefit if you buy it. The reality is, nobody buys these days LOL ;-) -
I got this new Ipod for christmas,& I started importing songs before it was fully charged. I thought thast caused the problem till I added new songs to the old one. Then it started doing the same thing. The old one never had this problem. Even one of the new songs I just bought stops 15 seconds in then jumps to the next song. I can't afford to replace them all.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
When I take photos whit my IPhone 4 camera the pictures look great but recently when I send pictures to friends or try posting them on Facebook the photos loose their quality dramatically and the ones that I sent all look blurry and bad compared tothe original. Please somebody help! I always take pictures with my iPhone and send or post them and this problem is restricting me a lit. Thanks for your help :)
when I could open iPhoto the library had tripled... photos from years ago from my iPhone and iPhoto had somehow come back onto it (even though I deleted them), the "faces" files had turned into their own photos, photos tripled (some smaller versions some bigger), and loads of random clip art and images I had never seen was on it. There was over 40,000 photos. It was so weird
Nothing weird. That happens when you import one iPhoto Library into another. Every version and thumbnail is imported like a distinct photo, you lose all your Albums, Keywords etc., the link between Original and Previews is destroyed, the non-destructive editing feature is ruined and so on. In summary: it's mess.
As for deletions:
Drag the image from the Event to the iPhoto Trash. Empty it. Then Empty the System Trash. That removes it from the hard disk.
If that has failed in the past it was due to the Library being corrupted.
Hello from Clare.
Maybe you are looking for
-
Sales analysis report differences when run by Sales Empl as opposed to Item
My client is running Sales analysis report and notices differences when run by Sales Employee as opposed to by Item. I explained that: When run by item, the report does not include service type invoices or non-inventory items. When run by sales emplo
-
Hi, I have an error while making a partial payment the error is "Special G/L indicator not defined or incorrect" i have defined the Sp gl. please let me know the issue Point will be assigned Regards Pady
-
Text Reflow When Exporting A PDF
I import 2 PDF's. One ontop of the other. The one on top is set to multiply (Transparency Effects). I export a new PDF and the text has reflowed and also causing text sit ontop of text. Imported PDF's are coming out of Quark 8. Quark 7 PDF's do fine.
-
Oracle Access Manager, ADAM & UCM integration? Help please..
I`m currently investigating the potential of using Oracle Access Manager (OAM) as a tool that allows connections to multiple Active Directory(AD) or ADAM servers providing a single point to author and manage users with a good easy to use GUI. The UCM
-
How to close a fullscreen Weboverlay with a MSO
Hi there, for our Client we've developed a Fullscreen Overlay which replaces the Default Navigation (which works great). But we've the Problem that we can't Close the overlay completley. We Show the overlay wih a MSO state, which works fine. Undernea