IPad 3rd gen not charging via wall socket

Ok I'm really annoyed right now, my iPad 3rd gen has suddenly decided not to charge when plugged via adapter to the wall socket. I thought it was the cables fault so I went into the currys store and bought an apple charger, came home and I have the same problem. When I plug my iPad to the wire to charge the battery sign flashes between between charging and not charging and then I get a message saying maybe this device is not compatible with the iPad and now I just keep getting the message saying "not charging". So I plugged the wire to my MacBook and yay the iPad charges, but its a little bit inconvinient for me and I prefer charging via the wall socket. I've tried everything resetting etc I've even done the software update (ios7.1). Can someone please tell me what's going on, am I doing something wrong? Any help would be appreciated! Oh I've also ordered the apple 12w adaptor charger, do you think this will solve the problem? Thank you

You, say, " I thought it was the cables fault", but then you say, "I went into the currys store and bought an apple charger". Did you buy a charger or a cable?
The problem could be the charger. If so, the new 12W charger should solve the problem.

Similar Messages

  • HT1414 my ipad mini will not charge from wall socket and it will not show itself on i tunes via my pc... i have also substituted my power charger from my i-phone to no avail.

    my daughter's i-pad mini will not charge up from the wall socket and it will not show itself on i-tunes via my pc... i substituted the power charger from my i-phone to no avail with the wall socket... seems like i read that the earlier i-pads have some problems with the lightning socket but can not remember exactly...there is no apple retail shop in the small city where i live but would travel to one if the fix is relatively quick or easy...otherwise, what can i do for diagnosis and repair?

    Most likely your cable is bad and you need to get a replacement.
     Cheers, Tom

  • IPhone 3GS no longer recognized in iTunes and does not charge via wall

    I upgraded my iMac to iTunes 9.2 when it came out.
    My wife then upgraded her iPhone 3GS to iOS4.
    Since then it is not recognized in iTunes and does not charge via the wall adapter.
    I realize this topic crosses over with several ongoing discussions, but there are no 3rd party peripherals involved here.
    The only major changes to our set up have been the itunes and iOS upgrades.
    The battery is running down, any ideas to fix this, or other similar experiences welcome.

    Went to the Apple store and they replaced the cable.

  • IPhone will not charge from wall socket only from Laptop or Computer!

    Just wondering if anyone else has had this problem?
    My IPhone will charge sometimes and sometime it wont:
    I mean like sometimes it will charge from the wall socket and sometimes it wont!
    It will go so far as to turn off because of no battery life! Then I plug it in to the Laptop and it starts charging!

    I have had this problem for some time. It applies to both a wall charger (the one that came with iPhone and a third-party model) and a car charger (third party). Both wall and car chargers are rated at 1000 ma which should be enough power. Yet when the battery charge goes below a certain level the phone will not charge from wall or car charger, but it will charge from a computer.
    I did some research on USB power. Per specification, a USB client (the iPhone) cannot draw more than 100 ma from the USB host (charger or computer or hub) unless it asks for and gets permission to draw more current. (This is so it does not interfere with other USB devices connected to the host.)
    Inexpensive wall chargers do not contain any computing elements. They short the D+ and D- lines together. This makes it impossible for a client to negotiate a higher current draw, so the iPhone, working per the USB standard, limits itself to 100 ma. When connected to a computing device such as a computer or USB hub, the iPhone can negotiate a higher current, up to the 500 ma currently allowed by the USB standard.
    This begs the question, why can't the iPhone charge on 100 ma when the battery is almost completely discharged? After all, when the battery has more charge, the iPhone will charge nicely from a wall charger. Perhaps someone has some insight into this aspect.
    There is evidently a new USB standard for wall chargers that will fix this issue. Both the host and client must implement in order for it to work. (I haven't read the standard, but suspect it involves the client detecting that the D+ and D- lines are shorted together.) Obviously, either the charger or my iPhone 3G don't comply with this new standard. Maybe the iPhone 3GS does? Or maybe we have to wait for another iPhone model that has the hardware that complies with the new USB wall charger standard.
    Meanwhile I have to be careful not to fully discharge my iPhone battery when I am away from a computer. I recently went on a 30-day trip and had no problem because I charged the phone every night. Of course, I did not use it much because it was an international trip and AT&T roaming rates are horribly expensive.

  • HT4060 My new ipad 4 will not charge with wall adapter.

    My new ipad 4 will not charge when I plug it in with wall adapter? It shows the low red battery, the charge sign but also shows the plug in sign. The plug in does not go away.

    If the battery has been completely depleted it may take more than an hour before the iPad becomes responsive again. Leave it on the charger overnight. If it does not charge up by the next morning make an appointment at an Apple store to have it looked at.

  • TS2634 iPad 4th Gen not charging with included apple 12w adapter & lightening cable.

    So I've only has this iPad since Xmas.
    It worked perfectly until a week ago when I started having charging issues with the stock accessories. 
    I plugged it in to the wall using the cable and adapter it came with and nothing. Not even the usual "Not Charging" message you may sometimes see when using an old computer's usb port.  However, if I turn it completely off while the cable is connected to the wall, It will charge just extremely slow (takes about 12-16 hours for a full charge).
    Its a 4th Gen iPad 16GB (Wifi only) with the latest software update 6.0.1
    Here are the steps I have taken thus far:
    I've tried isolating the problem using the accessories that came with the iPad (Cable and Adapter) and these steps below...
    1. Tried different adapters and lightening cables (all apple products btw). Some will give me the "Not Charging" message, but still the same issue. Every now and then the lighting bolt charge indicator will show up, but it either switches back to not charging or will still charge extremely slow (and yes I've even tried disabling all the radio toggles such as wifi, location services, bluetooth, push, etc...)
    2. Utilized the same steps listed with the accessories as above using different wall outlets
    3. Hard Reset (Sleep+Home) then plugging in cable before, during, & after boot logo.
    Haven't put it into DFU Mode yet & would like to avoid this for obvious reasons if possible.  Any other options I'm not thinking off?

    Make an appointment at your local apple store and take it in. there may be something wrong with the charging port or the software that tell it what to do. ANd that's something for the pros to deal with.
    If you didn't buy it at an Apple store you can take it back where you bought it (depending on their return policy but most places have 90 days)
    The reason I suggest that....I bought mine at Best Buy and it had charging issues. I took it into best buy (the closest apple store is over an hour away) and they simply exchanged mine for a new one. If you take it into apple, the policy is to exchange your malfunctioning one for a refurbished replacement.
    So I got a new device instead of a refurb. Not that refurbs are bad, sometimes they are better than the new ones, but I liked being able to walk out with a brand new device instead of a used one.
    Now if you bought it from Apple, then that's where you need to take it back to.

  • IPhone 4 will not charge via wall charger

    Hello,
    All of a sudden about 2 week ago my wall charger stopped charging my phone. I tried a hard reboot and it didn't work. Bought a replacement cord and wall jack and still doesn't work. Tested wall charger and cord on friends' phones and works correctly. Does anyone have a legitimate fix for this? Seems to be a provlem with the phone itself, rather than the cord or wall charger, as the cord an wall adapter work with other iPhone 4's, my phone will charge via the comp or via the car jack I have too.
    Thanks in advance for any help.
    John

    Do you have a 4 or a 4S? 
    I would take it to an Apple Store. This is not an issue I can really troubleshoot over the internet.

  • Old Ipod 3rd Gen not charging in usb

    hi,
    i have a 3rd gen ipod, wich was sold with firewire cable, i've tried to charge it with an usb cable, but it didn't charged...was it my fault or is it a normal situation?
    thanx

    The iPod video does charge over Firewire--however, it will NOT sync with the Firewire cable. A USB connecion must be used to add songs or videos to the iPod.

  • Iphone 3GS will not charge via wall charger

    My iphone 3GS (6 mouths old) will not charge using the wall charger, I recently updated my phone, could this be the problem?? I have two different apple wall chargers and neither of them will charge my phone. But when I used the chargers on my ipod Classic it works fine. I'm able to charge my phone using the usb port on my computer with no problem. Can anyone help me with this problem??

    They need to fix this quick. i'm having the same trouble too.
    My PC pops up "USB device not recognized"
    My wall charger which came with the device i've been using since doesnt charge my phone.
    all after updatin to ios7.
    SOS!!!

  • My ipad will no longer charge via wall or computer, wont turn on and i could not reset or restore please help

    i was updating apps when it froze. it would not let me do anything since then. i know the charger works because i have other apple products and it was opening to iphoto but not itunes

    If the reset doesn't work, you may have to force iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • [Sprint] Palm Pre Not Charging via Wall Adapter

    I noticed this morning that my phone battery was not fully charged before leaving for work. So, I tried switching USB cords and plugging it into the wall -- nothing. I then tried charging through the USB port in the PC and my system recognized the Pre and gave me the option to charge it. This happened suddenly as the wall adapter worked the night before. I also tried the car charger and it works as well.
    Anyone else have their wall adapter fail all of a sudden? I ran the test for the wall adapter on the Pre and it failed to recognize that it was plugged in to the wall adapter. I'm trying to figure out if it's just the adapter that tanked suddenly or if the actual phone is the problem.
    Thanks!

    I've had this happen a couple times, but it doesn't appear to be related to the source of power.  Sometimes it doesn't tell me that it is charging.  And once in awhile it does, but the battery either continues to drain or stays steady.  Seems rather random, so I guess you just have to monitor the charging progress.

  • Charging iPad One vs iPad 3rd gen via USB...

    just got an iPad 3rd gen.  As I've read here, apparently, the PC's USB port doesn't supply enough power to make the 3rd gen battery charging icon say "charging".  Instead, it reads "not charging".  However, it initially DOES say 'charging', before changing to 'not charging' a couple of minutes later.
    Question:  my iPad 1st gen ALWAYS charges via PC USB port.  Why?  Both AC chargers are 10 watts I believe, so why would the 1st gen charge while the third gen doesn't?  Does the 3rd gen require more charging watts than the 1st gen unit does?

    Using the 10W charger, an iPad 1 will charge in about 3-4 hours, however, the iPad 3 requires about double the time. How long does it take to charge your iPad 1 using the PC's USB port?
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • IPad 3rd gen no longer charges unless shut off and not recognized by iTunes

    iPad 3rd gen no longer charges unless shut off and not recognized by iTunes.  Done 2 resets, used original charger and cable and bought brand new charger and cable from Apple store.  Nothing works.  This started yapping after the iOS 7.1.1 update.

    Common troubleshooting is to try a different USB port and to give your ipad a reset. (hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot)
    You can also try on a different computer to see if it's the ipad or the computer.
    When you charge, do you try to charge plugged into the wall? that's the best way to charge.
    If you go through all that and it's still not working hten it may be time to make an appointment at your local apple store and have them check it out

  • Why does my iPad 3rd gen keep saying "not charging"?

    My iPad (3rd gen) is frequently saying "not charging" when I plug it into my computer or ac adapter. I'm using Apple cords and adapters, too!

    There has to be a power going through to charge it surley , it is ither of or on not low power? . Also daughter judy said '' i have tried ac adapter''. Maybe if you have another device e.g xbox with a usb port in try to connect through there
    GrumpyGator wrote:
    Most computer usb ports do not provide enough power to properly charge the ipad. If the computer goes to sleep while the ipad is plugged in, it can actually drain the battery. Use a wall charger.

  • Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter.  I have an ipad 2 that works perfectly.  Projector is a Dukane ImagePro 8106HA.  Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

    Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter.  I have an ipad 2 that works perfectly.  Projector is a Dukane ImagePro 8106HA.  Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

    Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter.  I have an ipad 2 that works perfectly.  Projector is a Dukane ImagePro 8106HA.  Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

Maybe you are looking for

  • Hierarchy data not display in particular Alignment

    I have created hierarchy on node id  the basis of parent id with group indent of 0.2. Put the other field  in detail field but after running the report it showing data in hierarchical order data (i.e data is not proper alignment).

  • Crystal report not working on 64 bit machine

    Hello friends, Hope everyone is doing good.  I have an issue and you all are requested to help me out. I have build an Application using VS 2008, i used Oracle 10g as database and Crystal report 2008 for reports. The Application and reports are worki

  • Stock determination during goods issue

    Hi expert, our client has one requirement in such a way whem they issue the material , at that time they could see batch wise stock and acordingly they could issue the material. i have assigned stock determination rule and group to material master as

  • Error in loading data into PSA from source system.

    Hi Experts !!! Good morning . I am trying to load data from SRM source system into BI system.When I execute infopackage,the data is not loaded into PSA and status of the process immediately becomes yellow.After sometime it gets timed out and converts

  • Exception when no_data_found then variable =: 'Text field of my choice'

    Hi, I have an exception in a package I have created. The package compiles fine but when I test it nothing is returned. I want TEXT 'NULL' to be returned as I'll use this in a lookup later on. EXCEPTION WHEN no_data_found THEN   v_Passangers