Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter. I have an ipad 2 that works perfectly. Projector is a Dukane ImagePro 8106HA. Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

Similar Messages

Bought ipod touch5 from the buyer-and the last owner has not stepped out of his iCloud.ya updated to 7.1.2 and now I need it from appleID Icloud

bought ipod touch 5 from the buyer-and the last owner has not stepped out of his iCloud.ya updated to 7.1.2 and now I need it from appleID ICloud I solve the problem of activation, if the owner had gone to Iraq? do not offer contact with the old owner as it is silly. a1421 model serial number c3*****4k1
HELP ME PEOPLE
<Edited by Host>

Hey wangyz_david,
Thanks for the question and detailed information. I understand that you are experiencing issues with your iPhone 5s in relation to battery life. The following website outlines some great tips for maximizing battery performance:
Apple - Batteries - Maximizing Performance
http://www.apple.com/batteries/maximizing-performance/
I also understand that you are interested in performing a recovery mode restore. You can find information regarding recovery mode here:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Please keep in mind that restoring your backup may cause the issue to be restored as well. For the best isolation steps, you may wish to restore as new:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/HT4137
After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
If the issue is still present, you may want to contact Apple Support.
Thanks,
Matt M.

My macbook pro shows blank screen when I started..help me..

My macbook pro shows blank screen when I started . (It's like in same state when power off. ) fan sound and hard disk is running. So i connected it Through external monitor via mini display to VGA cable. I can see everything on external monitor. My display of Mac needs to change? How much it cost ?? I found so many forum discussion said that if nvedia card is faulty then its happen...let me know suggestions...I given it to apple care service station n they r telling yr display needs to change its cost me a lot.. I can't afford. And can't spend that much for 3 yr old version as new versions of macbook pro is cost vice reasonable.. can I have any suggestion?

If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages.

My feeds are updating but the iTunes store has not updated

I put my rss feed up on feedburner and all my feeds have updated but the iTunes store has not updated. I was wondering if there a simple explanation for it. Subscribers to the podcast have gotten the most recent update but the store hasn't reflected the new changes.

When you add a new episode to your feed and upload it, it appears immediately for subscribers because their iTunes application reads the feed directly and the Store is not involved.
However because of the huge number of podcasts in the Store (thousands) the Store caches the feed and checks it for updates periodically. For this reason it usually takes 1-2 days for new episodes to appear in the Store: sometimes it can be less, and occasionally the whole process seems to get stuck and it can take several days.
All this assumes that you haven't made an error of some sort in adding your episode: it's not possible to comment on that unless you would like to publish the URLs of both your feed and the Store page - this latter can be found by control-clicking on the podcast image (or where it should be) - and choosing 'Copy link'. Please include the http:// in both cases to make the links clickable.

IPad 3rd Gen Shows Strong Verizon LTE Signal but no Internet

I've heen having a frequent issue where my Verizon LTE iPad is showing a full LTE connection but than I get error messages that I'm not connected to the Internet. So I end up having to toggle Airplane mode to get it to reacquire a signal (which might take a minute or two) and than all is well again until the problem happens again. This typically happens when I'm on the move as opposed to being at home; so perhaps an issue with transferring between cell towers but any advice to alleviate the problem would be appreciated.

Is this issue happening on both your work PC and MacBook or just one or the other? Are both PCs Macs? Is your "work" e-mail web-based that you can access from any web browser via just an Internet connection?
Do each of your computers use the same DNS server settings? The default would be your ISP's DNS servers.

Black/blank Screen when connected remotely

Zenworks 10.3.3
I've only come across one other post on this forum concerning this issue. Sometimes when we're remotely connecting to an XP workstation all that appears is a black/blank screen. The management and remote machines are MS Win XP Pro SP3, pretty well up to date with security patches and all. On the remote computer, the screen saver at logon is disabled, desktop screen saver is disabled, the NIC is allowed to bring the device out of standby, standby is enabled and hibernation is disabled. If you send it the reboot command, more often then not, you can catch it back at the login screen and go about your business.
Might Zen 11sp1 fix this?

Is anyone at the Device to see what state it is in when this happens?
On 10/28/2011 12:46 PM, elphantasmo wrote:
>
> Zenworks 10.3.3
>
> I've only come across one other post on this forum concerning this
> issue. Sometimes when we're remotely connecting to an XP workstation
> all that appears is a black/blank screen. The management and remote
> machines are MS Win XP Pro SP3, pretty well up to date with security
> patches and all. On the remote computer, the screen saver at logon is
> -disabled-, desktop screen saver is -disabled-, the NIC is -allowed- to
> bring the device out of standby, standby is -enabled- and hibernation is
> -disabled-. If you send it the reboot command, more often then not, you
> can catch it back at the login screen and go about your business.
>
> Might Zen 11sp1 fix this?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Why is my Mozilla Firefox toolbar not working? The weather icon has not updated in weeks!!

For over a week I've had a terrible time accessing the web via Mozilla Firefox, so went back to using IE. Tried again today, and things seem to be fine, EXCEPT that the weather icon on my Mozilla Firefox tool bar is still not updating to the current conditions. It hasn't updated in weeks. What is happening?

* Update Firefox to the latest version 10 -> [[Installing Firefox]]
* [[Add-ons are disabled after updating Firefox#w_check-for-new-versions-of-your-add-ons|Check for new versions of your add-ons]]
Check and tell if its working.
May not be related to your problem but some of your Firefox Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

Dell U2711 black screen when connected to Mac via DisplayPort

I currently have a Dell U2711 27" monitor connected to my Mac Mini through DVI (it uses a DVI to mini-DVI adapter at the PC end). However, I cannot get the full resolution of the monitor 1920 x 1080 maximum is offered were the monitors maximum resolution is 2560 x 1440.
I did some Googling and seemed it required DisplayPort connection to achieve this. No dramas. I ordered a Mini-DisplayPort to DisplayPort cable.
I plugged this in and all I get on the Dell is a black screen. The monitor doesn't go into power save mode or anything like that, just displays nothing - an illuminated black screen.
I pulled out my MacBook and connected the cable to that, same deal. The Mac recognises that the cable has been connected (as the laptops LCD goes blue for a second or two while it detects the new monitor).
Any ideas?
I also had a DisplayPort to DisplayPort cable here which was included with the monitor from Dell, which I will test aswell when my miniDisplayPort to DisplayPort adapter arrived.

Yes, that is one means, but...
However, HDMI 1.3 can also carry resolutions higher than 1920 x 1080 - check out http://en.wikipedia.org/wiki/HDMI - not really an option on the Dell monitor though, as it only supports up to 1080p on the HDMI connection. However, there is a thread elsewhere on the internet of a user who forced his Windows laptop to use 2560 x 1440 resolution via the HDMI output and the Dell monitor accepted it!
In addition, so can DisplayPort - as per my original post.
The Apple Dual-Link DVI adapter is plagued with issues and has a lot of faults, so I'd rather avoid it. It is also significantly higher priced than the above option of DP.

No picture on TV/DVD combo when connected to laptop via HDMI

I have. 2008 19LV50KW TV/DVD combo that I'm trying to use as a second monitor for my new laptop. I have it connected via HDMI port, and the laptop recognizes the Toshiba, I have windows 7 and have dual monitors enabled, yet there is only Black on the Toshiba TV (I have it on the HDMI input selection). What could be the issue ?

I've seen a number of similar posts around the internet. I have this same Toshiba TV, and my new fire TV stick from amazon will not display via the HDMI (the only option). So then I tried my laptop, and discovered that it too would NOT display.
Based on that troubleshooting, I've concluded that it much be an issue with the TV. Can this be remedied in any way? Both my fire TV stick and my laptop work on all of my other TVs. There seems to clearly be an issue with the HDMI input with this Toshiba model, and maybe more.
Please advise.

IPad 3rd gen will not update apps

App Store on iPad 3rd gen shows several apps needing updating. Updating requests P/W for Apple ID and then states that it cannot connect to the iTunes Store. I am connected to the store. I can also download new apps. Any idea on how to fix the problem. Thanks!

We owned all the apps and used them on an iphone 4s. They were added to the new iPad. About 8 apps showed updates, and the "can't connect" warning showed. The same Apple ID applies to all the apps on both devices.

I have purchased second hand 5c and previous owner has not removed it from their icloud list

i have purchased a second hand iphone 5c.The previous owner has not deleted this device from their icloud and I have lost his contact details.Is there anyway that i can find these details out from apple so that i can contact him and have him delete this device from his list so that I can activate and use it.

Sorry, this isn't a reply. Just wondering.
What have you done since? I have the same problem with iPad I bought second hand from an individual. The seller won't give me refund or provide me previous owner's contact info. Apple Support told me to contact local police to locate the original owner so I did. Since police didn't have report for this iPad's serial number they won't handle this as theft. I live in Utah and the seller I met with told me he is from Northern India so who knows which country this iPad came from. I wish to let the original owner know i have his/ her missing iPad since Apple doesn't care about consumers once they sold their products.

I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please

I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please

Hi Blueandpink,
If you are running iOS 4, you will need to update the iPad via iTunes on your computer (can't do OTA updates unless you have iOS 5 or higher).
If you have a first generation iPad, unfortunately you won't be able to update to iOS 6 (iOS 5 is the highest you can update to on the original iPad).
If you are on an iPad 2, 3, or 4th generation with iOS 5 and it still isn't working, try holding down on both the Sleep AND Home buttons at the same time for about 10-15 seconds (ignore the red slider button). Keep holding it until the Apple Logo appears. When you see the Apple logo on the black screen, let go of the buttons. This “reset” fixes a lot of iPad issues and might work to resolve the update issue. Try updating again.
Hope this helps!
~Joe

HT201270 I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down.

I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down. What should I do?

Have you tried a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.

Need some help to unlock the Ipad. Cannot contact the previous owner he is in the shelter and I do not know were. After I restore the Ipad is asking that the previous owner has to remove it from his account

need some help to unlock the Ipad. Cannot contact the previous owner he is in the shelter and I do not know were. After I restored the Ipad is asking that the previous owner has to remove it from his account

Nobody on these boards or at Apple will unlock that device for you. Sorry.
(117810)

When I connect my iPhone 4S to my MacBook Pro, the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started". What does that mean?

Hello,
When I connect my iPhone 4S to my MacBook Pro (through the USB port), the synchronization process by iTunes failed with the following message "My iPhone could not be synchronized, because the synchronization process has not started".
What does that mean?
Thanks in advance for fixing my problem.

I think I remember hearing that if you quit iTunes with your device still connected, then open iTunes up again, it should work.
EDIT: Here, this might help: http://support.apple.com/kb/ts1567

Ipad 3rd gen shows blank screen when connecting to projector via HDMI AV adapter. I have an ipad 2 that works perfectly. Projector is a Dukane ImagePro 8106HA. Only difference I see is that the ipad 3 owner has not updated to IOS 6. Any thoughts?

Similar Messages

Maybe you are looking for