Ipad and mac keyboard and mouse

I plan to buy an ipad for my wife. So far, she balks at the onscreen keyboard.
I'm not clear if the "dock" connector on the ipad is the usual USB port, or instead, something proprietary to the ipad. Since i already own an old imac keyboard, is it possible to plug this USB keyboard straight into the ipad,. Or is my only option to buy Apple's bluetooth keyboard? I have also read few threads here, where people are having problems with the bluetooth keyboard.
I'm equally curious to learn from other people who also thought they needed a real keyboard, but then when they tested it, along with the onscreen keyboard, they actually preferred the onscreen one.

You'd think we could get a clear answer from an Apple tech support guy monitoring this thread. I do believe you when you write that you have connected USB keyboards via the camera gadget. But it would be very nice to know what the electrical specs have to be to optimize this connection. In my case, i was hoping to connect one of those VERY old blue and white keyboards. I actually think it came bundled with an old G3. It was panned at the time, but the keyboard is quite small and thus very portable, so it would be perfect IF it worked. I bet there's some voltage and or impedance specs either on the body of the unit or in some old Apple website. Maybe we can ask someone at one of those non-Apple test sites.

Similar Messages

New Wireless MAC keyboard & mighty mouse very slow in retrieving information & sending

Good evening,
I just purchased these items last night from the Apple store, they are both installed on my bluetooth. I do have OS Lion.
Whenever I want to go to another site for example this site it spins and spins and takes approx 1 min which feels like 5mins.
My other wireless key board and mouse was logictech for Mac I never had a problem like this.
The only reason why I switched was because of the functionality the keyboard and mouse did not have.
Can some please help me or educate me on what I am not doing correctly.
Thanks so much,
Phyllis

I don't think you are doing anything wrong. I also don't think you communication to your computer (in this case with bluetooth) has anything to do with your computer's internet connection.
If you are having a slow internet connection then when it happens plug your old mouse and keyboard back in. Your internet connection should still be just as slow.
Maybe you should use different DNS servers as opposed to what your ISP provides. I can suggest OpenDNS (208.67.222.222, 208.67.220.220) or Google's DNS servers (8.8.8.8, 8.8.4.4).
One last thing. Since you changed a peripheral, particularly when dealing with bluetooth, I suggest you also do a smc and pram reset. In fact try this before you try changing your DNS servers.

Ipad and mouse: it is important

I'm considering an ipad. This forum has indicated that it would not be neede because ipad is touch screen. Apps like LOGMEIN can access PSs and MACs. Once accesses, a mouse with right click functioality would be essential. For some of us, it would be important. O, since there is a viable reason why a mouse for ipad would be necessary, does anyone have any thoughts?

All the functionality is built in the $29.99 LogMeIn Ignition app. No need for a mouse.
Here is a demo video.
http://www.youtube.com/watch?v=Cg2bJJXC3Po
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Can I connect a mac keyboard and mouse to my ipad

Can I connect a mac keyboard and mouse to my ipad

iPad: How to pair / connect any bluetooth keyboard
http://www.tech-recipes.com/rx/5772/ipad-how-to-pair-connect-any-bluetooth-keybo ard/
iOS: Apple Wireless Keyboard compatibility
http://support.apple.com/kb/HT4112
Bluetooth: How to set up your Apple Wireless Keyboard
http://support.apple.com/kb/ht1809
 Cheers, Tom

Control your mac from apple tv using bt keyboard and mouse

Hello, is there a way to control a mac from the apple tv using the mouse and keyboard paired with the apple tv?
My mac and apple tv are in diferent rooms and I would like to use my mac with the mouse and keyboard from the living room.
I have trayed some ipad/iphone apps to control my mac while mirroring mac to apple tv but it doesn't work very well for me due to the lag of time...
I have been searching in internet about this but I didn't find much. I am wondering if maybe there is an app or something that can do what I want.
I have this devices to work with:
Macmini with apple bluetooth keyboard and magic mouse
Apple TV3
Ipad 3
Iphone 4s
Thank you very much

Welcome to the Apple Community.
Jorge1981 wrote:
Hello, is there a way to control a mac from the apple tv using the mouse and keyboard paired with the apple tv?
No.

Any wireless keyboard and mouse is compatible with mac?

hello guys i want to buy a wireless keyboard mouse to use it with my macbook pro i just dont know if i can get any or it has to be compartible with mac.

Any BlueTooth keyboard or mouse should work. I have a nifty Kensington BT keyboard that switches from my desktop to MBA to iPad with the flick of a single key and I have a BT Magic Mouse.

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

Want Mac mini and G4 to share Display and USB keyboard and mouse

I bought a KVM switch at a local electronics store. I got the only one that claimed Mac compatibility (PPA Int'l). I can't plug the switch into the G4 Cube. No such ports. With the adapter that accompanied my brand new Mac Mini, I can plug the KVM monitor port into the mini's monitor port, BUT that port is currently being used by the Apple DVI-to-ADC adapter I bought so I can connect my Cinema Display to the Mac mini.
The KVM switch wants 3 ports on each computer: a VGA (monitor) port, the keyboard port, and the mouse port; but the keyboard/mouse connectors are not USB.
As things stand--without the switch--I can shut down whatever computer I'm working on (mini or Cube), unplug the display from one, connect it to the other, power up and everything's fine. I suppose the only advantage with the KVM switch is being able to power off, switch, then power on without having to move the display plug.
My QUESTION is, does anybody manufacture a KVM switch I can use between two Macintosh computers to share use of my USB keyboard powered from a USB port on the display, and my USB mouse powered from a USB port on the keyboard?
Or is the answer NOT to go for the convenience of a KVM switch?
Does it matter that the mini OS is Leopard, and the Cube OS is Tiger?
I am heartily impressed with the mini. Setup was over in 5 minutes, and I must say it's fast. Appreciate any help from the experts. --Spot

I had the same problem, and finally came up with two other alternative solutions.
First, if you have a recent LCD monitor, it is fairly simple and cheap. The Mini has a digital connection for the monitor. My G4 400 MHz has both digital and analog connections. I have a Samsung 19 inch widescreen monitor that has both a digital and an analog input. I connected the G4 to the monitor using the analog input with my old cable, and connected the Mini using the digital input. The Samsung has a switch that will use either the digital or analog input - very easy.
Now the keyboard and mouse. I got a 6 foot USB cable with the A plug on one end and B plug on the other, plugged the A plug end into the G4, and ran the cable with the B plug up near the Mini. It helps to keep it close. You already have the keyboard/mouse plugged into the Mini. You simply unplug the keyboard cable from the Mini, and plug it into the B plug from the G4. Switch the monitor from digital to analog, and you have the G4 (remember to start it up). Once you have run the cables, it takes about 10 seconds to make the switch.
Second, and I use both ways, is to get an inexpensive wired router. I bought a Belkin 4 port router (about $30, I think), got a couple Cat 5 cables, hooked both the Mini and G4 up to the router, along with my internet connection, and have both computers available on one monitor with no physical switching involved. You will need to go to System Preferences/Sharing and turn on Personal File Sharing (there may be another change, but I can't remember it right now).
When all is hooked up, you go to GO in the Finder Menu Bar (make sure the G4 is booted before doing this) click on either NETWORK or CONNECT TO SERVER, find your G4 and connect. It may be confusing the first few times, but it works great because you have access to both computers at once, along with your internet connection - the best of both worlds!
I did this in January of this year, so please forgive me if I have forgotten a step somewhere. Ask me and I'll be glad to try to walk you through it. The first solution is the simplest to do, and the second in the most versatile. It's your choice.
Hope this helps. Just don't be intimidated by it - if I can figure it out, we can get you connected. Good luck!

I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station.

I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit. Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Hi, I bouhgt a used Apple Power Mac G5, I want to buy a blue tooth card for the same to use wireless keyboard and mouse, i am just curious that why do i need to provide the serial number of my computer, is there any compatibilty issue?

Hi, I am new in Apple Computer, I bought a used Power Mac G5. I want to buy a blue tooth card for the same to use wireless keyboard and mouse. so why it is mandatory to provide the serial number of the machine?

Hello, Serial# not needed...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

Using a PowerPc G5 and Mac Mini with the same display, keyboard and mouse

I have a G5 PowerPC and a new Mac Mini. I wanted a good KVM switch so that I can use the same display, keyboard and mouse with both machines. Any suggestions?

IOGear, Trendware and Startech.
I'd stick with IOGear.

Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive tha downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it?

Since my G5 died I was thinking about getting a Mac Mini, but I have a ViewSonic Monitor (from 2004) and a USB keyboard and mouse - I also have the external drive that I downloaded my files on to. Do you think the monitor, keyboard and mouse will work on it? Would I have to get a hub so I could use the stuff I already have? Is that viewsonic too old to work on it?
What else would I need? Please advise...

Yes for keyboard and mouse.
The monitor will work if it has an HDMI, VGA ir DVI input. If it only has a VGA input you will need this adopter
http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables/cable_choo ser#selected-step1=MINI-DISPLAY-PORT&selected-step2=VGA&step=3

My new mac mini doesn't detect my wireless keyboard and mouse from logitech

I recently bought the Logitech MK550 wireless keyboard and mouse combo for my late 2014 Mac mini. Basic functions work, however, when I try to add the keyboard and mouse in the System Preferences it can't find either one. So right now I have this great big keyboard that I can only use about half it's full functionality and an unassigned button on the mouse. Any ideas? Also, I would like to add an apple remote to my mini. I have one from my old iMac. Is this possible?

Try resetting the SMC.
Question #2 - I have no idea.
Barry

Mac mini loses mouse and keyboard after sleep.

Hi Everyone:
I recently bought my Mom one of the new Mac mini (I'm a PowerBook user myself), and she's running into some puzzling problems which, while minor, are sufficiently annoying as to confuse poor old Mom.
The system egnrally runs fine after you turn it on, until it goes to sleep. After some undefined period in sleep mode, the Mac mini appears to "lose" the USB keyboard and mouse which is plugged into it. If you press a mouse button or a keyboard key a few minutes within the system going to sleep, the system will wake up and both will work. If you wait a longer period of time (say, 20 minutes or longer, although I haven't sat and timed it at all), pressing any key or mouse button does nothing, and you have to wake it from sleep by using the power button. Once awake, the keyboard and mouse do nothing. The only way to get them back is to unplug both of them (the mouse is chained through the keyboard as the other Mac mini USB slot is used by Mom's UPS), and plug them back in so the Mac mini can re-detect them on the bus, after which everything is happy again until the system has been asleep for too long.
Has anyone experienced this? Both the mouse and keyboard are genuine IBM (as in: made by International Business Machines), although are several years old (I bought them when I worked for IBM, and IIRC they were amongst the first models of USB keyboards and mice that IBM offered, if not the first).
In the interm, I've lent Mom my Apple Bluetooth mouse and keyboard, which has (as you would expect) worked flawlessly. This problem may "solve" itself -- I'm hoping to take Mom out later this week to buy her own Apple Bluetooth mouse and keyboard at the Apple Store.
The other problem, however, isn't as easy (or necessarily as cheap) to fix. Again after the system has been asleep for some time, it often (but not always) changing the resolution of the monitor when it wakes up. I have the mini set to use a reasonable 1024*768, but sometimes when it awakes it will suddenly be set to 800*600 or 832*624. Sure, you can change it back, but that's major surgury for Mom (and I'm moving cross-country next week, and won't be able to just "drop by" to fix system problems). The monitor is an Ambra SVGA model (Ambra was a brand-name of inexpensive PCs that IBM sold some years ago), and never had any such problems on her last (Intel-based) system the mini is replacing.
The whole purpose of the Mac mini is to "bring your own" Keyboard, Mouse, and Monitor -- but in our case the keyboard and mouse don't work at all after sleep, and the monitors resolution gets dynamically changed after sleep. Has anyone else encountered this situations, or any solutions? TIA!
Brad BARCLAY

Hey Jan:
I've seen quite a few posts in this regard with non-Apple mice and keyboard.
Well, the mouse and keyboard are quite old -- it could be that they're having a problem dealing with identifying themselves on the USB bus during sleep, or aren't identifying themselves fast enough at wake time. I'll just have to replace them I guess.
I've never seen a sleep resolution switching problem except on a VGA adapter to DVI connection to an old tube monitor.
Well, this is a pretty vanilla CRT monitor circa about 1999, so yeah -- it could once again be an age issue, and the fact that there is a DVI -> VGA adapter involved in the middle.
For worrying about fixing Mom's Mac, setup her remote VNC software (Apple Remote Desktop Client) and use the free Chicken of the VNC admin program.
I am quite familiar with VNC. As much admin as possible will be done by SSH, but I will have VNC in place before I leave. The big problem is going to be the fact that I'm going to be several timezones (and over 4000 km) away, so I won't necessarily be available at a moments notice to help her with this sort of thing.
The CRT issue we might just have to deal with by having her always run it at 800*600 (I don't think she'd really notice the difference, and as her eyes aren't what they once used to be, the slight size increase may be more confortable for her in the long run) until such time they she can afford to buy a nicer display (I did my duty as a son buying her the Mac mini and an iSight camera -- she has to take care of the rest ).
Yaz.

Mac Mini and Bluetooth Keyboard and Mouse

I have a Mac Mini as a server. I've decided to do a clean install of Mountain Lion and Mountain Lion Server. I don't have any wired keyboard or mouse and am having trouble getting the Mac Mini to see the keyboard and mouse. I can buy cheap wired ones but I'd like to use my bluetooth ones if at all possible. Can anyone offer some tips for doing this successfully? I need a method that assumes I have a Mac Mini with a clean, formated disk and a bootable flash drive with the latest copy of Mac OS X Mountain Lion.

I did unpair the mouse. The keyboard has only ever beenpaired with the Mac Mini. Today I was finally able to get both devices talking with the Mac Mini, but I really don't know how I did this. I just played with turning them on and off. If the Mac Mini has been newly formatted (as I finally managed to you), is the pairing information retained?
I'm thinking there is more to this issue than just bluetooth pairing.
Thanks for your quick reply. (I'm still redownloading Mountain Lion from the Apple store and making a new bootable flash drive as the one I had won't let me install. Not sure why.)
(If the issue is just one of pairing it would appear I don't need a wired mouse and keyboard.)

Ipad and mac keyboard and mouse

Similar Messages

Maybe you are looking for