IPad app update does not appear to work

I have the new iPad with retina display and several days ago, I noticed that I keep getting bugged to update the app "CNBC Real-Time for iPad." When I accept the update, the app appears to update. However, when I click on the App Store, I am again bugged to install the same update. Resetting my iPad has not corrected this. Deleting the app and reinstalling the app did not correct this either. I am inclined to believe that this is a problem with the application and not the iPad given that I don't seem to have this problem with other applications but I wanted to report this in case it is more than that. Just wanted to bring this to attention both in case this is a problem not isolated to this app and my iPad.

This has been resolved.
For those searching for reasons: it was probably a aftershock from the appstore issue from a few days ago... Or the app version number didnt match the soon to be released updates which got leaked (new appstore issue)
Anyway, its all good now.
Thanks!:)

Similar Messages

Software Update Does Not Appear to Work

I currently have v4.2.1 iOS on my iPhone 4. Today I see an iOS update for v4.2.6 yet when I go to update it tells me that I have the most current iOS. I would love to know more about v4.2.6 and if it's meant for my iPhone.
Thanks

If you have an AT&T or other GSM phone, then this update is NOT intended for your phone. It is for the Verizon CDMA iPhone only at this time.

HT204266 I downloaded AirPlayIt yesterday from the app store. It was on my iPad yesterday. Today, however, the app icon does not appear on my home screen. When I go into apps it is there but it doesn't have an "Open" choice. There is only a cloud with

I downloaded AirPlayIt yesterday from the app store. It was on my iPad yesterday. Today, however, the app icon does not appear on my home screen. When I go into apps it is there but it doesn't have an "Open" choice. There is only a cloud with an arrow pointing down. When I click on the app it pops up but there is no open button. How can I remove it? Tapping it won't work as it isn't on my home screen.

You'll have to contact the developer about this. Apple doesn't make this app;

How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the 1st generation.

How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the first generation ipad.

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Apps panel does not appear, "Install Adobe Apps" not working

Hi,
I would like to download Photoshop CC (first the trial version) but after downloading Creatice Cloud Desktop, the Apps panel does not appear at all. If I click on the "install adobe apps" tab nothing happens. I have tried everything that was written on the forum but nothing seems to work . I have also re-installed the programs several times.@
Sara

Ciao guys, in the end I tried everything in this post but nothing worked.
I managed to solve the problem through this: creative cloud is blank window why? renaming that opm.db file but in the "Program Files (x86)" folder (I prevously used the "program files" one.
Thanks
Sara

'Find' function does not appear to work in TextEdit on .txt documents

Most of the time the 'Find' function on the TextEdit application does not appear to work on .txt documents. I have verified this by using Find on words that I know are in a document, and it cannot find them. I've tried different options on the 'Find' function without success. This appears to have started with version 10.6.8. Has anyone else had this problem since upgrading to 10.6.8?

Thanks -- but I swear it worked fine prior to either the 10.6.7 or 10.6.8 updates and now it doesn't. I'll just keep experimenting and playing around with it and see if I can get it to work. Maybe the new Lion O.S. coming out will fix it, although I'm not going to rush -- I made the mistake of putting Snow Leopard on right after it came out and had problems with some programs not working properly anymore (like Pro Tools, for example). Always a good idea to hold off until most of the bugs get fixed.

I purchased an ebook with my ipad but it does not appear on my iphone 4 even tho I use the same icloud account

I purchased an ebook with my ipad but it does not appear on my iphone 4 even tho I use the same icloud account

connect your ipad to itunes and click on the ipad and go to its app tab on the list check if pages name is checked or not if not check it and try syncing again it will install the app

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

exception-type in web.xml does not appear to work

WLS 60 SP1 (#101616)
          <exception-type> in web.xml does not appear to work. WLS shows standard
          "Internal error 500" page instead of a custom error page. The custom error
          page is shown if <error-code> is used instead of <exception-type>.
          Any ideas? Thanks


Can you show me some of your code? This works for me.
Also, you say that you are working with 6.0sp3. Are you sure? sp3 hasn't been
released yet, except in a very limited beta. (I believe only internally, but I
could be wrong about that.)
David
[email protected] wrote:
Hi all,
I have created a very simple servlet and an index.html file with a link
to it, then packaged it into a WAR file with the appropriate web.xml and
ias-web.xml files. I then created an application.xml file referencing
only this servlet and adding a context root. After deployment via
"iasdeploy deployapp simple.ear" and cycling the web server, I can reach
the welcome file (index.html) correctly
-"http://localhost/NASApp/simple". When I attempt to follow the link to
the servlet ("simple servlet") the URL ends
up as "http://localhost/NASApp/SimpleServlet" whereas it should be
http://localhost/NASApp/simple/SimpleServlet If I type that url in, the
servlet executes fine.
I've deployed this into Tomcat and get the behavior I expect. It appears
that the element in the application.xml file is ignored by
iAS.
I'm using iAS SP3 on Win2k (same problem on NT).
This is such a basic behavior that I can't believe this is an existing
bug. I must be doing something wrong...
Any ideas?
Thanks in advance,
-Glen
Files are attached.
Name: simple.ear
simple.ear Type: application/x-unknown-content-type-ear_auto_file
Encoding: base64
Description: filename="simple.ear"

GetColumnAt(index) does not appear to work

I am attempting to place a simple Icon in a dataGrid using
cellRenderer. My problem is that
'myDataGrid.getColumnAt(index).cellRenderer' does not appear
to work. Most of the forum examples create arrays with AS and don't
show this example. I already use XMLConnector (which works fine)
the problem is referencing a column after the fact. I can do this
when creating column smanually but not using getColumnAt(index).
My code block:
import mx.controls.gridclasses.DataGridColumn;
import mx.controls.gridclasses.DataGridRow;
import mx.core.UIComponent;
playlist_dg.cellRenderer = "IconCellRenderer";
playlist_dg.getColumnAt[3].cellRenderer = "IconCellRenderer"
Any help is appreciated. cellrenderer is a bit hairy
Mitch

this is either a blindingly stupid question (for which I
apologise) or a legit bug. Either response would put my mind at
rest.
Thanks
Hillcreative

I had to replace my iPhone today. I have alot of music that still resides on my iPad. It does not appear in iTunes. How to I get this music to my iPhone?

I had to replace my iPhone today. I have alot of music that still resides on my iPad. It does not appear in iTunes. How to I get this music to my iPhone?

From the iPad to itunes...
Transfer Purchases
File > Devices > Transfer Purchases
More Info Here > http://support.apple.com/kb/HT1848
From iTunes to iPhone...
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/

Msi gt70 2PE integrated HD 4600 graphics HDMI port does not appear to work.

Hi guys,
I have the GT70 2PE with integrated hd 4600 graphics and with a dedicated nvidia geforce gtx 880m card. The HDMI output does not appear to work.
I'm tech savvy and cannot figure this out for the life of me. have tried nearly everything.
lets start from the low level troubleshooting done:
- plugged in the HDMI cable from a working computer that has HDMI hooked up to it. This did not make a difference from the new cable I bought for hooking up my TV to my laptop.
- booted the laptop up and do not see a duplicate screen outputting via HDMI, all my video cards in my PC's I've built prior have always shown the HDMI output as a duplicate screen when I had a monitor hooked onto a PC. This makes me believe the HDMI port may be disabled/broken as there is no HDMI output at POST. Only the laptop monitor displays output.
In Windows 8.1 I've installed the latest 4600 drivers and nvidia 880m beta drivers.(even though installing nvidia drivers shouldn't matter since I've read the HDMI output is tied to the 4600 integrated graphics chip, also if during POST the HDMI output never showed up on my TV, then installing the latest intel graphics drivers shouldn't have made a difference either, which it didnt make a difference).
I've tried disabling the integrated graphics card then re-enabling it, as noted on the intel forums. - does nothing.
what I've ruled out:
-HDMI cable issues = no issues due to other PC's and devices working with the cables. All cable tests are direct connect to the TV, no intermediary devices such as hdmi splitters etc.
-BIOS has zero options for graphics card options.
Any ideas before i RMA this laptop? I'm at a loss.

OP's problem has been solved. Also please don't resurrect and do not hijack other people's topics. Open your own one.
>>Please read and comply with the Forum Rules.<<
Topic Locked

Hashmap containsKey() method does not appear to work

Hashmap containsKey() method does not appear to work
I have an amazingly simple custom class called CalculationKey, with my own amazingly simple custom equals() method. For some reason when I call my containsKey() method on my HashMap it does not use my defined equals method in my defined key class. Do hashmaps have their own tricky way for establishing whether two keys are equal or not?
THIS IS MY AMAZINGLY SIMPLE CUSTOM KEY CLASS
private class CalculationKey
private LongIdentifier repID;
private LongIdentifier calcID;
public CalculationKey(LongIdentifier repID, LongIdentifier calcID)
this.repID = repID;
this.calcID = calcID;
public boolean equals(Object o)
CalculationKey key = (CalculationKey)o;
if (key.getCalcID().equals(calcID) &&
key.getRepID().equals(repID))
return true;
else
return false;
public LongIdentifier getCalcID()
return calcID;
public LongIdentifier getRepID()
return repID;
THIS IS MY AMAZINGLY SIMPLE CALLS TO MY HASHMAP WHICH ADDS, CHECKS, AND GETS FROM THE HASHMAP.
private Hashmap calculationResults = new Hashmap();
public boolean containsCalculationResult(LongIdentifier repID, LongIdentifier calcID)
if (calculationResults.containsKey(new CalculationKey(repID, calcID)))
return true;
else
return false;
public Double getCalculationResult(LongIdentifier repID, LongIdentifier calcID)
return (Double)calculationResults.get(new CalculationKey(repID, calcID));
public void addCalculationResult(LongIdentifier repID, LongIdentifier calcID, Double value)
calculationResults.put(new CalculationKey(repID, calcID), value);
}....cheers

You can make a trivial implementation to return a
constant (not recommended)What do you mean by that? Hmm.. I guess you mean that
you shouldn't use the same constant for all objects?
But don't see the int value of an (immutable) Integer
as constant?
/Kaj
You can write hashCode to just always return, say, 42. It will be correct because all objects that are equal will have equal hashcodes. Objects that are not equal will also have equal hashcodes, but that's legal--it just causes a performance hit.
The value is that it's really really simple to implement: public int hashCode() {
return 42;
} So you can use it temporarily while you're concentrating on learning other stuff, or during debugging as a way to confirm that the hashCode is not the problem. (Returning a constant from hashcode(), rather than computing a value, is always legal and correct, so if something's behaving wrong, and you replace your hashCode method with the one above, and it still breaks, you know hashCode isn't the problem.)
The downside is that you're defeating the purpose of hashing, and any non-trival sized map or set is going to have lousy performance.
For a decent hashCode recipe, look here:
http://developer.java.sun.com/developer/Books/effectivejava/Chapter3.pdf

Crystal 8.5 (Minimum function in the function tree does not appear to work)

HI I would greatly appreciate some help with this problem I am having.
I am creating a report in which there is a group of records printed . Within each record there could be any number of results related to that record of which I want to extract both the maximium and minimum value and print these. This bit is fine as I do this using the maximum and minimum function available within the summary function.
However with each of these max and min values calculated and printed I then want to create a footer that adds all these max and min values up. (This is not immediately possible using the 'summary function' max and min values as they are not presented on the 'Field explorer' dialog box for selection.
However I can individually using the maximum 'tree function' get the report to store these values so that I can do the calculations once I have got to the footer (as the fields defined are accessible through the field explorer. But the same minimum function does not appear to extract a result (and no I do not have zeros in the data).
Is there a known problem with the minimum function?
Is there another way of getting this data?
Thank you in advance
seyviv

Hi Debi, it would be easier for mean to demonstrate what I wnat/am doing in the report by use of data.
I have a file with a list of sample results. There may be many results for one sample. ie
Sample      Result Number      Result
98-01          1                           3
98-01          2                           5
98-01          3                           6
98-02          1                           3
98-02          2                           7
98-02          3                           9
98-03          1                           4
98-03          2                           5
98-03          3                           11
On the first page I want to see the max and min values across all samples listed for each result number. Then as a total value (once all the result numbers max and mins are displayed I want to perform a calculation on the max and min values displayed in the list (ie. max 4 + 7 -11 and for min 3 + 5 - 6)
                      Result
                      Number        Max           MIn
                      1                    4                3
                      2                    7                5
                      3                    11              6
Result of                             0                2
Calculation
I have been able to do this for the max values but the minimum function does not work.
How I currently extract this data is that I use a 'Summary field ' to calculate the max and min values in the list. However to get the data for the calculation at the bottom I use the 'Formula fields' to extract the values listed for all the results for 'result number 1, 2 & 3' and then use the 'Function tree' to get the 'Maximum value for each individual result number and then finally do a calculation on the max values. However, the same minimum function does not appear to work.
I hope this explains what my problem is.
Thank you in advance of any suggestions you may have
Regards
Viv

App list does not appear. Why does it take longer?

App list does not appear. Why does it take longer?

Hi smilekick,
Are you using Windows or Mac? Are you on a managed network. If no Try signing out and signing in of CC desktop. If still the same issue remove CC desktop, run the cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html and try installing again.
Create a new user account and check whether the same issue persists.
Regards,
Romit Sinha

IPad app update does not appear to work

Similar Messages

Maybe you are looking for