Ipad mini did update and now screen rotation is locked.. can this be fixed ?

I did and update for ipad mini and now the screen rotation is locked. I am seeing other posts about this update and am afraid this will be step one in more issues. Afraid to do the upgrade on my mac. Last time I had to take it in to the genius bar to have them fix it. Whaat? Any help would be appreciated. Thanks/

See the following for info on the Side Switch settings that can either control Orientation Lock (screen rotation) or Audio Mute.
*iPad side switch settings link:
http://support.apple.com/kb/HT4085

Similar Messages

  • IOS 8.1.2 Ipad mini 2 Laging and slower screen rotation

    I have just updated my brand new iPad mini 2 with IOS 8.1.2 and the screen rotation became slower ,at the lock screen it became more  obvious it takes 1-5 seconds to rotate and the "slide to unlock" slider animation is freezing and lagging ,at the application screen takes 1-3 seconds ,the problem goes when I restart the device ,How Can I solve this problem .

    Hi there farahatology,
    Welcome to Apple Support Communities.
    It sounds like you’re running into general performance issues with your iPad mini. One thing you may want to try, to rule out software issues, is restoring your iPad to factory settings as shown in the article linked below.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Cheers,
    -Jason

  • HT201363 my ipad went on update and now asking for passcode which i don't know

    my ipad went on update and now asking for passcode whcih i don't know what should i do now to start operating

    Hey sunny1008,
    Thanks for the question. The following article provides some solutions if you are having issues with passcode lock:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the Connect to iTunes screen.
    5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
    Thanks,
    Matt M.

  • Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

    Just updated my iPad with iOS 7 and now internet does not work anymore, how to fix if???? Desperate

    Try resetting your iPad:
    Double click the Home button. Slide up with one finger on ALL your apps to close them.
    Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
    This will reset your device without erasing data, apps or settings.

  • HT6114 I did update and now I can't get on laptop? Just keeps rebooting saying there is a problem.

    I did update and now I can't get on laptop? Just keeps rebooting saying there is a problem.

    Beginning with Firefox 4, Macs must have an Intel x86 processor ('''''yours is a PPC Mac''''') '''''<u>and</u>''''' OSX 10.5 or higher ('''''which you do not have''''').
    *System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8] [https://www.mozilla.org/en-US/firefox/9.0/system-requirements/index.html Firefox 9]
    '''''The good news''''' is that Firefox 3.6.x still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
    *System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
    *Download Firefox 3.6.x: https://www.mozilla.org/en-US/firefox/all-older.html
    *Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
    You can try the third-party product '''''TenFourFox''''' that supports PPC Macs with OSX 10.4.11 and OSX 10.5.8. Firefox 9 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
    *Home page: http://www.floodgap.com/software/tenfourfox/
    *Developer's blog: http://tenfourfox.blogspot.com/
    *'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/ReleaseNotes90
    *'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Just did update and now will not open

    I Just downloaded an update and now my computer will not open.  It brings up the apple sign then turns to black and nothing is working!

    Try restarting in Safe Mode: OS X: What is Safe Boot, Safe Mode?
    Tereseaj wrote:
    I Just downloaded an update and now my computer will not open.  It brings up the apple sign then turns to black and nothing is working!

  • HT201263 i did the update and now my phone is locked.  I tried the restore through itunes and it said unknown error occured.  what now

    I just did the upgrade and now my phone is locked.  As I have never locked it before, I don't know what to do.  I tried the recover through itune that att walked me through and the message came up that it was unable to restore.  Now what do i do?

    http://support.apple.com/kb/TS3694

  • Just updated and now phone keyboard is locked

    Help. I updated os7 activated FaceTime and now my keyboard is locked. Is there a default setting?  I don't know what I did

    If the keyboard isn't supposed to show in the app then it's possible that the developers need to make a change for iOS 8.
    You could try closing the app via the iPad's taskbar and see if that makes any difference.
    If not then you could try deleting the app and redownloading it and see if that fixes it - though if you've made in-app purchases within it you may want to check if they are re-downloadable.

  • HT4061 i have downloaded the iso7 updates and now my phone is locked. I have never used a code before, so therefore I am unable to access my phone

    i have updated my iphone 4s with the new iso7 software, and now my phone is locked. It is asking me for a code, but I have never locked my phone, so therefore have no idea what the code could be. How do I get back into my phone without loosing any data

    Check Settings>Messages>MMS Messaging and make sure it's set to "On".

  • New MacPro 10.9.4 included Keynote. Worked fine. An update was released August 21. Just downloaded the 6.2.2 update and now get error message "You can't open the application because PowerPC applications are no longer supported". Any ideas?

    New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?

    I tested this:
    Reinstalled Aperture 3.1 from the Trial Installer.
    In some way it seems to be working. But the whole thing is a scary Chimera.
    It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
    But the Media Browser does not show the aperture Library that I created.
    The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder.  Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
    The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
    When opening the chimera Aperture, I see plenty of warnings in the Console window:
    An Aperture "Hang" report
    xpcproxy assertion failed
    com.apple.IconServiceAgent: main failed to composite image
    quicklookd: Warning
    and more ... the hang was critical. I had to force quit Aperture more than once.
    So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your  precious photos.

  • My Safari did updates and now it will not open. How do I fix this?

    My computer did updates about a week ago and ever since then the internet will not open. It says it downloaded safari 5.1.1, when I try to open safari it comes up with a message saying the community toolbar does not support the version I am using.
    How do I fix this so that I can have internet?

    This may help you What you can do if Safari quits unexpectedly

  • Ipad mini water damage and now my volume does not work!

    Phone was in purse where I accidentally put a water(which I thought was closed tightly) and now my volume does not work!

    Water is generally fatal for iPads.  You might take it to your Authorized Apple Service Center and see what they can do for you.
    Prepare to replace your iPad.

  • My iPad mini is cracked and what's the price for it to be fixed? It doesn't have a retina display.

    Does anybody know the price?? Please help!!

    Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
    The warranty will apply to the country of purchase. And if there is a problem needing repair you have to return it to the country of purchase.
    Apple’s Limited warranty can be found here:
    http://images.apple.com/legal/warranty/docs/ipad_warranty.pdf
    Out-of-Warranty Service
         If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)   
    iPad model
    Out-of-Warranty Service Fee
    iPad mini
    $219
    iPad 3rd, 4th, Air
    $299
    iPad 2, iPad
    $249
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    iPad Repair and Service
    http://www.apple.com/support/ipad/repair/
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
    iCracked - Broken iPhone, iPod or iPad
    http://www.icracked.com/
    iReVamp Electronics Screen Repair ($99)
    http://www.irevampelectronics.com/ipad-2-broken-glass-screen-repair.html
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    iGadgetResQ
    http://www.igadgetresq.com/ipad-repair/
    Do It Yourself iPad Repair
    http://www.ifixit.com/Device/iPad
     Cheers, Tom

  • Helllp, i dowload itunes update and now i got a message saying:this copy of itunes is corrupted or not installed , reistall again...

    i dowloaded a update for itunes and now when i try to open it tells me:
    this copy of itunes is corruped or not installed....its telling me to reinstall...someone help please lol
    when it was in the middle of updating itunes closed .......i duno if that matters....

    No, you SHOULDN'T lose your library. I say SHOULDN'T because over the years, I've lost quite a few songs by updating iTunes. I'm not sure why that is but it happens. Other than maybe losing a couple of songs here and there (IF that even happens at all to you), your library should remain intact.
    I recommend UNINSTALLING iTunes on your computer first (if it shows up in the Uninstall Menu) and then installing iTunes 11 from a fresh download.
    Any version of Windows should have a similar process for uninstalling a program. I've been using Windows since Windows 95 and I now use Windows 7 so I know the process is similar now matter which version you use. I will tell you how I do it in Windows 7.
    Start > Control Panel > Uninstall A Program
    Then scroll down the menu until you find "iTunes" and highlight it. Then at the top of the screen, select Uninstall. Let Windows finish uninstalling it (it may require a Restart of your computer). Follow all the steps to uninstall it.
    Then visit http://www.apple.com/itunes/download/ and get iTunes 11 for your version of Windows. Download it and install it.
    This SHOULD fix the problem. Once you do that, you'll need to go through the process of locating your library though the iTunes Preferences menu. Once your library is sync'd with iTunes, you should be ready to enjoy your music again.
    I hope that works for you!

  • Ipod nano...and now getting the ipod touch, can this be done ?

    on our pc I have itunes for my ipod nano....hubby is getting an ipod touch but will be using his laptop to set up a new itunes
    can we use each others itunes for downloading some music ? what I mean is
    PC has loads of golden oldies
    LAPTOP will have lots of new downloads
    can the iphone be used on the PC and the LAPTOP and have all the music from both itunes, or will it be one or the other ?
    thanks in advance

    *.its not giving me any option to take songs from the nano on to my laptop itunes,*
    That would be correct, iTunes will only give you the facility to copy your iTunes Store purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
    For everything else (music from CDs, other downloads and including iTunes purchased songs and in some cases, videos and games) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    A selection of iPod to iTunes utilities:
    TuneJack Windows Only (iPhone and iPod Touch compatible)
    SharePod Windows Only (iPhone and iPod Touch compatible)
    iPod2PC Windows Only
    iDump Windows Only
    YamiPod Mac and Windows
    iPod Music Liberator Mac & Windows
    Floola Mac & Windows
    iPodRip Mac & Windows (iPhone and iPod Touch compatible)
    iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
    Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
    iGadget Mac & Windows (iPhone and iPod Touch compatible)
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    TouchCopy Mac & Windows (iPhone and iPod Touch compatible)

Maybe you are looking for

  • How to enter a range of ports in the firewall

    Does anyone know the syntax of how to enter a range of ports in the firewall so I don't have to enter each individual number?  For instance, to open port 15000 to 15264, is it possible to type something like "15000 - 15264" instead each port followed

  • Hello BT, I'm a new customer since Friday... it's ...

    In the middle of January I informed Virgin Media we will be moving to an area where they do not provide fibre and after finding out BT are scheduled to put lay fibre at the end of March, decided to sign up with them. Due to the current speed of the e

  • OS X Mavericks 10.9.3 Crashes Too Often

    Hi, My iMac and MBP have been upgraded to OS X Mavericks 10.9.3. They crash too often. Ed

  • TS1538 I've done all the steps, my phone still cannot be detected. Any ideas?

    I've done all the procedures and instructions, my phone still can't be recognized/detected. P.S. My phone is stuck at the boot logo screen.

  • Search help prob

    hi , i have a search help.. with a selection method - a database view. and a search help exit is assigned to the view... the code id as follows.. TYPES: BEGIN OF lt_final,              dist_id TYPE <type>,,              dist_name TYPE <type>,