IPad mini using too much power

My iPad mini rapidly using battery charge. From fully charged I start browsing and within 15 minutes the battery has gone down by 20 percent. This has only been happening in the last week. Prior to this it would be several days before the battery went down this much. How can I stop this happening?

Bumping this one last time to the top. Anybody have a suggestion, love my Classic. No shops close, live in Mexico. sorry for the bump, but don't want to pull the plug.

Similar Messages

  • HT4101 When connecting my camera to my IPad mini via lightniing to usb camera adapter,I get "The attached accessory uses too much power" .Any solutions?

    When I connect my Ipad mini to my camera via lightning to usb camera adapter all i get is a message "The attached accessory uses too much power."Any solutions

    It depends on the camera, but some have a special mode for offloading photos but not trying to charge the camera through the USB port. For others, you may have to pull out the SD card (if that's what it uses) and use the Lightning to SD card reader instead.
    Maybe if you told us what camera you are connecting, somebody here with the same model can give you more specific information.

  • To upload photos from my pc onto my ipad using a usb stick. I bought a camera connector kit and tried placing the usb stick onto one of the white square adaptors, stuck it into the ipad2 and I got 'the device uses too much power'' message. Pls help.

    I am not very familiar with the ipad2. I wished to transfer some photos from my pc (not an apple pc but that is the only one I have) to my ipad2 as I thought it would be easier to cull them, edit, crop etc to create albums for our recent trip (the photos are already on the pc and no longer on the camera memory card). When I place the usb stick on the adaptor and stick it onto the Ipad2 I keep getting 'device uses too much power/ requires too much power' message. I read somewhere on the internet that a usb hub could be used to solve the issue but that did not work either. What am I doing wrong? Is there actually a way around this problem. If not why does apple sell this product for Ipad users at all?
    Thank you for any help/ solution you can offer.
    Regards

    I'd ask that on the iPad forum.
    https://discussions.apple.com/community/ipad

  • HT4101 Has anyone found a way to download pictures from Samsung Gala               xy 3 phone to Ipad air?  I bought the lightning adapter but keeps giving me the message uses too much power.

    Has anyone found a way to download pictures fro Samsung Galaxy 3 phone to the Ipad air? I bought the lightning adapter but I keep getting the message device uses too much power.  Any ideas?

    You can't directly from a Galaxy phone.  But you can certainly upload the pictures from your Galaxy phone to your computer and then sync them to your iPad via iTunes.

  • HT4101 When I connect using the USB version I get a message on the ipad saying "the attached accessory uses too much power. What can I do?

    Ipad2 Camera Connection Kit
    When I connect using the USB option I get a screen on the ipad which says "Accessory Unavailable. The attached accessory uses too much power"
    What should I do please?
    David

    I believe your camera uses a micro SD card. The CCK accepts the full size SD card. Do you have a SD card adapter to plug the micro into?
     Cheers, Tom

  • HT4101 My ipad says the device uses too much power when I connect my camera

    I brought my ipad 2 on holidays and have purchased the camera connection kit.  I tried to download my photos and an error message came up saying that the device uses too much power!    My ipad is powered up to 100% and I have closed any open files and it still says the same thing?  Does this actually work or do I have to return it?

    What have you connected to the kit ? The amount of power that is supplied to the kit is limited, and can't be changed - and a lot of card readers and cameras need more power than is supplied to it. If you have connected the kit directly to your camera then does your camera have a setting to enable 'mass storage device' and/or PTP (picture trasnfer protocol or pictbridge) ?

  • I bought a camera connection kit , while connecting my camera (Samsung ex1) , I got this message from my iPad "my attached accessories using too much power "

    I bought a camera connection kit but fail to connect to my iPad . My iPad prompt me that my attached device using too much power ! I got no problem using the SD connecting kit. My camera is Samsung EX1 , pls advise

    Do your cameras support Picture Transfer Protocol (PTP) and/or USB Mass Storage Device Protocol (http://support.apple.com/kb/HT4106), and if so do you need to change a camera menu setting in order to enable it ?

  • IPad won't sync. Using "too much power". Help?

    When I go to plug my 4th gen iPad into my Macbook Pro, it says I need to unplug the USB device using too much power, referring to my iPad. It has always worked before but as of late i have not been able to connect my iPad in order to sync it. Any Help, thoughts, suggestions greatly appreciated.

    Do your cameras support Picture Transfer Protocol (PTP) and/or USB Mass Storage Device Protocol (http://support.apple.com/kb/HT4106), and if so do you need to change a camera menu setting in order to enable it ?

  • HT4101 My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

    My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

    I'm having same problems.   If I connect my blackberry it says it uses too much power.  If I take sd card out of phone and connect that way I get the same message.    The leaflet with the connector says go to Apple.com/support/iPad to find list of compatible cameras..........  I'm still trawling the site to find any such list!    Just need to know if it will work with a blackberry .....  If not I've got to take it back.    Have been advised by a friend to cut my losses get my money back and use Bump to transfer my pics.    I don't own a traditional camera because my phone has a great one.  Really don't want to have to carry a camera about with me!   They don't make it easy do they!   

  • IPad camera kit error "device uses too much power"

    Got the camera kit....when I attach it I get an error that says the device uses too much power. I've shut down and restarted the iPad several times and still get the same error. Anyone know what I can do?

    I have a camera that uses compact flash cards therefore I have been experimenting with card readers to avoid draining the camera battery when downloading the images to the iPad.
    I have been using the USB part of the camera connection kit with a multi card reader, at first I could not get anything to work, I thought ' the not enough power reason, I sorted out a powered USB hub to try, again no good, I disconnected everything and thought one last try, I put the card in the reader, connected the USB cable to the USB part of the camera connection kit and finally inserted the whole lot into the iPad, to my surprise the light on the card reader came on and a few seconds later 70 nef files were previewed on the screen.
    I repeated the above several times with the same results, I then tried two other card readers again OK, but if I just removed the card and then re inserted it nothing happened, these card readers are no name supermarket specials.
    I may have been lucky but I will continue to try my method and see if it holds up to regular use, so make the physical connection to the iPad the last part of the connection process, I hope this is of some help to others.

  • I just got an iPad 2 16 gb and was wondering how I can upload pictures from a micro sd card but my iPad is saying cannot connect device using too much power. I have tried a 16 gb micro sd card and 4 gb micro sd card. Can anyone help please??

    I got an iPad 2 and I cannot get my pictures to upload from a micro sd card as the iPad is saying device not accepted using too much power. Can anyone help? My iPad 2 is a 16 gb and my micro sd card is 4 gb

    You can use a USB flash drive & the camera connection kit. First download the pics to your computer.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
     Cheers, Tom

  • I can no longer download photos to my ipad with the camera attachment. the message says thats its using too much power. i have a 100% charge and i used it before and it worked fine.

    I can no longer upload photos with the camera attachment. I am getting an error saying the device uses too much power. I have used the device before. Is there anything that can be done to fix this problem?

    You don't actually say what the problem is, but maybe this can help:
    USB and Firewire information:
    http://support.apple.com/kb/HT1151?viewlocale=en_US
    http://support.apple.com/kb/HT4049?viewlocale=en_US

  • HT4106 unplug the device using too much power to re-enable USB devices

    iPad min cannot be changred, it shows
    unplug the device using too much power to re-enable USB devices

    Try unplugging it. Give your iPad a reset by holding down the sleep and home keys for about 20 seconds (until it reboots) then try again.

  • On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

    On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
    "USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
    I unplugged the device and the message still keeps coming up.
    This is what I have done so far to troubleshoot:
    I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
    The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

    I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
    1. Reinstalled OSX
    2. Restore the last known good Time Machine Backup.
    This did not fix my issue, so I called Apple Support and they told me this:
    1. Turn Power off.
    2. Wait 15 seconds.
    3. Plug in Magsafe adapter.
    4. Wait 15 seconds.
    5. Hold down the Shift+Option+Power Button for 20-30 seconds.
    6. Turn Power back on.
    Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
    and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

  • Why does my Macbook pro said "unplug the device using too much power to re-enable USB devices" when i plug in my iphone's charger to connect my phone with the mac?

    my iphone 5's charger is not working anymore with the mac or the normal plug in neither, i dont know why. whenever i plug in my mac, i have to twist the charger a little and my mac said "USB Devices Disabled: Unplug the device using too much power to re-enable USB devices". of course it cant connect with the itunes in my mac, but somehow it still syncs the music to my iphone... i don't understand why. please help me thanks!

    try resetting the ipad,or change the cable ,it woould work 

Maybe you are looking for

  • APEX_APPLICATION_FILES: ORA-00942: table or view does not exist

    Hello, As my first APEX task I am attempting the upload/download demo on http://download.oracle.com/docs/cd/B32472_01/doc/appdev.300/b32469/up_dn_files.htm The ultimate goal is to store PDF files in the database. In order to complete step 1: To creat

  • How to upgrade my haddisk? (old 2009 verion)

    i would like to upgrade to 500GB+, possible? how to? where to buy the harddisk? how to open the macmini? can i do this in Apple shop? Thanks.   Model Name:          Mac mini   Model Identifier:          Macmini3,1   Processor Name:          Intel Cor

  • Exclude foreign data in delivery & billing at header & item level

    Dear all, I want to stop foreign data check from my export sales scenario in delivery or in billing document, I have not done any configuration for the same. Even by deselecting check in delivery or in billing at both level Header & Item level, my bi

  • Confusing information about expanding iMac 2.3

    hi, there are confusing information about expanding my white iMac 2.33 GHz. I want to change the RAM configuration. Today the Mac contains 2x 1GB RAM (DDR2 SDRAM 667 MHz). Apple says I can go up to 4GB - but only use 3GB. Is there anyone using 4GB in

  • I cant get past backing up when trying to install ios 5 error (-43), please help!!

    I downloaded the update for ios 5. Updated Itunes. Ready to give up after several tries of installing ios 5. Getting same message each time (error (-43)) while backing up the phone. I need help. Do I need to reinstall the update? If so, how do you de