IPad not recognized by iTunes, recovery keeps failing.

I have not yet seen a real suggestion as to troubleshooting steps for this issue on these discussions.
The iPad is not recognized by any MB Pro except in recovery mode. I have tried different cables and different ports on different laptops. iPods are recognized. iPad works normally otherwise. Recovery keeps failing. After sitting in recovery mode for a few minutes, the iPad either shuts off or goes back to normal operating mode.
iPad recognized sometimes by iPhoto.
I've tried all the stupid suggestions support had; erase and reinstall, remove iTunes and all files,
reinstall. (Dumb because the issue occurs on all MB Pros)
No one has had any answers on this issue on any posts on discussions.
iPad phone support keeps transferring me to MB Pro support (who's only TS answer to any problem is erase and install) who transfer me back to iPad who only know recovery and "I've never seen this problem before" or "it should work"
So, what is next? Wait and see if Microsoft comes up with a working product?

On my iMac-22" , I encountered the same problem with a 3G iPad/ 64 GB .
Tried iPad-reboot , and resetting prefs. etc., other cables ,and iPhone & iPods were recognize but iPad was not.
Tried re-installing iTunes , but after connecting - no Pad.
Did a reset and the connection-symbol didn't show on th IPad screen... instead
it went straight to black , or operarting /Home screen .
I had the Pad a week, and only sync-ed it once before ( though I did
break off an automatic upload of my entire iTunes Library , changing it to manual picking ,but transferred fine on to the Pad ).
Good to read similar (or same?) problem ; indeed :
not many Forum-subjects on this yet.
I'll update and answer on here after resolving.
thanks

Similar Messages

  • IPad not recognized by itunes or my PC...stuck in recovery mode

    Wow... what a mess.
    I inherited a first gen iPad last week... wanted to wipe it clean and start fresh.  Restored and erased all content... and now it's stuck in recovery mode.   It's not recognized in iTunes or at all by my PC.   When I plug it in... nothing at all.  Looked in my device manager for it to show up... nothing.   Tried restaring it, putting it into DFU mode, plugging it into different usb ports, different usb cables, reinstalling itunes, trying it on multiple different computers, and pretty much every how to help article I could find on the web.
    HELP!    There must be some way to kick this thing back to life.   It's fully charged, was treated well before I had it, and practically new.
    HELP!  Please.

    did you try all those steps:
    Disconnect the device from the computer.
    Save a screenshot by pressing the Home button and the Wake/Sleep button at the same time (the screen should flash briefly). Note: Taking screenshots and saving images on iPod touch requires iOS version 2.0 or later.
    Reconnect the device to the computer.
    Open the Device Manager in Windows as follows:
    Windows XP: Click Start > Run. In the resulting dialog type devmgmt.msc and press Return on the keyboard.
    Windows Vista or Windows 7: Click Start. In the dialog, type devmgmt.msc and press Return on the keyboard. If Windows needs your permission to continue, click "Continue".
    Expand all the sections labeled below (not all sections may be listed):
    Imaging Devices
    Other Devices
    Portable Devices
    Universal Serial Bus Controllers
    Look for the entry that recognizes the device as a camera. This entry should be called Apple iPhone,Apple iPad, or Apple iPod.

  • IPad not recognized by iTunes

    I have the following problem:
    My new iPad is not connecting to iTunes. When I insert the USB cable I hear the USB-connect sound of windows, but in iTunes nothing happens.
    However my previous iPad and iPhone are connecting without any problems. I followed all the steps in the guide on the Apple Support page, including completely deleting and reinstalling iTunes. Nothing helped.
    My stuff:
    OS: Windows 7
    Itunes: latest version
    iPad with retina display, iOS 6.1 - the new one that will not connect
    iPad 2, iOS 6.1 - connecting without problems
    IPhone 4, iOS 6.1 - connecting without problems
    Can anyone help me and solve this problem of my new iPad not connecting to iTunes?

    I found a solution. It seems that Windows had a setting selected that drivers are not automatically installed if not available on the computer. So I changed this setting and my iPad was immediately recognized.
    For people with the same problem: I went to: Control Panel > Devices and printers. Under Unknown I saw my iPad, so I right clicked and selected: Solve problems. Then it said something about missing drivers so I chose to install them. In addition the problem solve wizard pointed me to the setting in windows that drivers are not automatically installed.

  • IPad not recognized by itunes in Win7

    Hallo,
    after setting up my computer new and changing to windows 7 (starting with a new SSD) my iphone is not recognized by itunes. In windows i get in
    start -> system configuration -> hardware and sound -> printers and devices
    8 devices in section 'printers and fax'
    5 devices in 'devices'
    and in the bottom section 'not specified' the ipad device
    The first question is if this is the right place to show for the ipad in win7. I see nothing in 'computer' in the windows explorer
    If i plug and unplug the ipad from (several) USB ports (which are all 2.0) i get the typical windows sound for that
    The problem is that the device does not show up in itunes. If i choose [Questionmark] / Start diagnosis in the itunes menu bar, all is green except for the one red light saying 'no ipad found'
    I already worked through the official help
    http://www.apple.com/support/ipad/assistant/itunes/#section_0
    with no result (itunes version 10.4.1.10, USB 2.0, itunes re-installed)
    Can anybody help, any ideas?
    Thanks in advance

    I just worked again throught the link provided by Carolyn Samit
    I stumbled in the section
    3. Verify that the Apple Mobile Device USB Driver is installed
    There i read after gettin into the device manager
    'Locate the Apple Mobile Device USB Driver in this list.'
    I got a whole bunch of USB things in the device manager but none of them has the word 'apple' in it. Does that really mean i have to search for some apple word in the device manager?
    Maybe someone out there with a working win7/ipad/itunes system can just confirm that
    a) he has some apple thing in the device manager
    b) his ipad does not show up in the windows explorer
    c) his ipad shows up in the section 'unspecified' in the start -> system configuration -> hardware and sound -> printers and devices
    Thank you

  • IPod Touch and iPad Not Recognized by iTunes

    When I plug in my iPod Touch and iPad, iTunes does not open, but both devices are recognized by Windows 7. When I open iTunes manually, there is no listing for "Device" at all. I have uninstalled and reinstalled the latest iTunes version several times to no avail. I'd appreciate any advice on what I can do to solve this problem.

    Have your tied the troubleshooting here:
    http://support.apple.com/kb/TS1495
    (iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows)

  • Ipad not recognized in itunes

    I'm sick of this....iPad is recognized by Windows 7 PC, but not in iTunes. Latest versions of all software - Windows 64 bit, iTunes 64 bit. I uninstall iTunes and reinstall, and it recognizes my iPad, but after computer shutdown and reboot, it's back to the same problem. I thought apple was supposed to be great?

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

  • Ipod & ipad not recognized by itunes

    ipod touch & ipad are not recognized by itunes. i already removed & restarted  & reinstalled  the amds & itunes hoping it would work, but nothing!  maybe 3rd party software is interfering?? i think i temporarily disabled some software from that 3rd party list, like norton & mcafee i actually removed the mcafee program. and still itunes is not recognizing either item.  pls help. should i entirely remove the  all the security/firewall programs?

    Thanks for the response but this didn't work for me. I went thru the whole comprehensive set of steps and still iTunes doesn't recognize either device. I'm not sure what else to do. My husband thinks I should restore the computer to an earlier date prior to the last iTunes software update. Not sure what else to do. For now, both the iPod and the iPad work fine. I just can't synch them.

  • Ipad not recognizing in itunes

    i have ipad and installed itunes 10.x in my machine. But some how the device ipad is not recognizing in itunes.
    any help would be greatly appreciated.
    Thanks
    Naveen

    update itunes, use another usb port, use another cord

  • HT201210 running windows 8 ipads not recognized by itunes using latest itunes and ios

    just upgraded to latest itunes and ios 7 running windows 8 two ipads not being recognized by itunes windows 8 identifys ipads as apple device in my computer have tried unistalling then re installing itunes any ideas ?

    chris1571 wrote:
    I've tried all of the tips on the site, nothing seems to work.    Any ideas?
    Which ones?  Have you tried this one - iPod not recognized in iTunes and Mac desktop?
    Please describe in detail all you have attempted to do in order to resolve the issue.

  • Ipad not recognized by itunes; apps shut off on ipad as soon as I open them

    My ipad is not recognized in iTunes, when plugged into my computer. I can't back up or sync to my computer, but I have managed to back up to icloud, I think. Applications shut off within 20 seconds of opening them on my ipad. I think I need to reset my ipad but I'm just not getting that option when I plug it in to my computer and I'm worried about whether or not the icloud backup is sufficient. Thanks!

    Try some basic troubleshooting before you restore your iPad.
    First close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
    Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that didn't help, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
    IF you really feel that you need to restore, and maybe you will have to, try this for help with the device not being seen by iTunes.
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • Ipad not recognized on itunes

    I cannot get itunes to recognize my iapd. I am using windows 7 ultimate on a dell inspirion

    iOS: Device not recognized in iTunes for Windows

  • Had an Error Installing new iOS software, Now Ipad not recognized by itunes

    This morning I was updating the iPad with the latest software from itunes.  There was an error.  Now itunes doesn't recognize the iPad.  The screen on the iPad when it is plugged into the PC is the same one when you recieve a brand new iPad.  How do I get the iPad to be recognized by iTunes? 

    Thanks for trying.  I have tried shutting down and restarting the iPad and the Computer to no effect.  For what its worth when I shut down the iPad the red slider does not show up.  Also in PC's Device manager the iPad is in Recovery Mode.  But, I do not see the black screen on the iPad.  I see the connect to iTunes Screen.

  • IPad not recognized by iTunes, recognized by Windows as a camera

    I first started using my iPad yesterday. Yesterday I was up until 2:30 in the morning trying to find a solution, to no avail. I had apple support call me today, but I missed their calls and now I have to wait again until they call me. But in the mean time, here's what's going on. My iPad is recognized by windows (XP Pro SP2) as a camera when I plug it in, but it will not show up in iTunes. I ran the diagnostic connectivity test in iTunes, and all lights are green except the one indicating that an iPod/phone/pad is plugged in. I've restarted the iPad, I've restarted my laptop, both numerous times, I have no firewall/antivirus running (as per older posts I've seen here) and still nothing. Today I plugged it into my mother's laptop, and iTunes recognized it without a problem, so I'm assuming it's something to do with my laptop. Anyone have any suggestions?

    Folks,
    I had this problem with my PC (windows 7, 64-bit) and my iPad. After messing with it for a long time, I finally found the answer (bad USB driver). The following two step process should help resolve these kinds of problems more quickly.
    The first step is to verify that the iPad (or iPhone) is really connected to your computer. This can be (really) checked using a program called USBDeview. You can get this (very small) program from http://download.cnet.com/USBDeview/3000-2094_4-10614190.html or http://www.nirsoft.net/utils/usb_devices_view.html. Don't worry, it's not Spyware or Malware.
    Just run the program and sort on the 'Connected' column. If your iPad or iPhone doesn't show up as Yes (under 'Connected') then your iDevice is not properly connected to your computer. Could be a cable problem. Could be an iDevice problem. Could be a USB hub problem. Note that your iDevice might be listed as what it is (iPad or iPhone) or it might be listed as 'Apple Mobile Device USB Driver' in the 'Description' column.
    Apple has a number of ideas to resolve this sort of basic connectivity issue, including switching USB ports, resetting your iDevice, rebooting your iDevice, rebooting your computer, etc. You will need to try them until your iDevice shows up in USBDeview as 'Yes' under Connected.
    If you iDevice shows up as 'Yes' under connected, it should also be visible in the Device Manager (found in the Windows 7 Control Panel under Hardware and Sound). You might find it under Portable Devices or it might be under Universal Serial Bus controllers.
    The iDevice may or may not show up in the Windows Explorer. On some machines it does, on others it does not. Why is not clear.
    If the Idevice is properly known to Windows and iTunes can't see it, then any number of other things could be wrong. Apple has a list. See the very useful page over at http://support.apple.com/kb/TS1538. Testing shows that the Apple Mobile Device service must be running. Check this using Task Manager (started by right clicking the taskbar). Note that the iPod service and the iphlpsvc service must also be running. These services have different names under the Processes table versus the Services tab of Task Manager.
    AppleMobileDeviceService.exe - Apple Mobile Device
    iPodService.exe                      - iPod Service
    ItunesHelper.exe                     - iphlpsvc
    Step 4 of http://support.apple.com/kb/TS1538 checks if the Apple Mobile Device USB is installed. This is essential and a common source of problems. In at least some cases, Windows will install the 'MTP USB' driver. Indeed, Windows will reinstall this driver if you uninstall it. The MTP USB driver is essentially a Windows bug (possibly caused by Microsoft). You must replace the MTP USB driver with the Apple Mobile Device USB Driver. Step 4 explains how to do this. Note that you must use the 'Have Disk' approach. Otherwise, Windows will just reinstall the invalid MTP driver.
    The Apple doc indicates that you can find the correct driver at C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. Perhaps this is correct on some systems. You may find the correct driver in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
    iTunes could make this a lot easier by checking if the iDevice is known to Windows (what USBDevier does) and if the Apple Mobile Device USB driver is properly installed for the iDevice. Sadly it doesn't perform either check. Note that iTunes does if some of the related services (see above) are actually running.

  • IPAD NOT RECOGNIZED BY ITUNES, AND NOT ALWAYS CHARGING

    HELLO,
    MY IPAD 1 32 GB WIFI/3G IOS 5.0.1 IS NO MORE RECOGNIZED BY ITUNES ON MACOS X 10.6 or PC, WITH ITUNES 10.5.3,  AND IS NOT CHARGING ALL THE TIME.
    IT DIDN'T SEEM TO BE AN ISSUE OF THE IPAD USB CONNECTOR, SINCE IT DIDN'T GET ANY SHOCK, AND IT ACCEPT CHARGING SOMETIMES, EVERY 5 to 10 ATTEMPTS BY AVERAGE, WHEN FORCE IT TO HARD RESET (HOME+POWER).
    I TRIED IN VAIN DIFFERENT USB CABLES, OR USB PORTS , DIDN'T FIX THE PROBLEM.
    THANKS TO HELP ME TO SOLVE THAT.

    jamesb2012 wrote:
    Sorry for that :)
    IT sometimes accept to charge when plugged into its original wall mount charger. But not all the times...
    That portion of the problem indicates a hardware issue.  Is it sitll in warranty?  In the meantime, try some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • TS1538 iPhone and iPad not recognized by iTunes 11.1

    After an update to 11.1 iTunes stopped recognizing my iPhone and iPad. I tried everything I could find on Apple site and generated by a Google search. I tried reinstalling iTunes, restarting Mobile Device Service, uninstalling all the components - restarting and reinstalling itunes. After I uninstalled itunes and all of its components it would not install again. I finally restored my Windows to a oint when I had a previous version of itunes, library wouldnt load because it was already updated to a newer version itunes library, so I deleted it and itunes started - but, of cours, it would not read my iphone or ipad because I already had ios 7 installed. So, I tried updating to new version - couldn't update it. I don't even get any error numbers I could go off - the instlallation just rolls back and tells me that it could not be completed because of an error! What error - I have no idea. Oh, but at least this old version of itunes recognizes that I have an iphone or ipad connected! And I can open photos folder, just can't sync anything to my devices. So, I uninstall alllll of the components of itunes again - every single one of them, delete all contents of temp folder, make sure I have no trace of itunes or apple-anything on my computer, restart it and try to install itunes again - nothing, same thng - starts installing, then at one point all of the progress rolls back and says there was an error installing it. So, I make sure I have no apple and itunes programs left on my laptop, clear temp folder again, restart and restore my laptop. Install itunes, yahoo - it installs! My entire (HUGE) library of music and audiobooks - gone, BUT at least it installed itunes 11.1. SO I connect my iphone and... NOTHING! Went to device manager again - tried updating driver from a foler - error, tried scanning for changed - nothin happened, tried restarting Mobile Device Service - error, cannot restart it. Checked in control panel & I couldn't even see it in the uninstall programs, but I see it in administrative services... So I am lost, I literally tried everything I could think of myself, everything I read on apple support site and everything I found on Google.... And I know for a fact that it's the new version of the itunes, coz previous one works and I would be fine with it and keep it, if it would only read my iphone! Oh, by the way - I have no third party devices installed besides the iphone and ipad. And my WIndows updates are allll the way up to date! This issue started when I updated my itunes after the release of the ios 7.
    What do I do now? Get rid of the stupid iphone and ipad??? What's the point of having them if I can't even sync my music to them!!! So upset with Apple! If I could only use their product like any android or windows phone - go to my computer, open the device and put the folders in it! But they will never give this much power to us!
    Does anyone has any new ideas on what I could do to resolve this issue?
    Thank you!
    PS: my husband has same problem with his iphone and ipad... on his desktop computer... So obviously - i'm not alone!

    So, an update... I was able to fix my iTunes & connect my iPhone & iPad to it. All it took is a hard drive reformatting & re installation of Wondows 8. Good one, Apple! Thanks for the new iTunes release!

Maybe you are looking for

  • Case statement in OWB mapping

    I am trying to use a case statement in an OWB mapping. I am attempting to use it in expression builder within a filter object. Each time I try to validate the expression in the expression builder I get an error: Line 4, Col 6: PL/SQL: ORA-00920: inva

  • Share iCal among 3 macs...but, by using one file on a server

    I've read the other posts requesting a way to sync mutliple calendars. I want to do this but by maintaining ONE master calendar file somehow on a harddrive attached to my network. So no matter which computer that's attached to the network, I'd be abl

  • How to obtain oracle lite polite jdbc driver

    Hi I have an old project which I need to compile. However this project imports oracle.lite.poljdbc.OracleCallableStatement and oracle.lite.poljdbc.OracleResultSet. Where can I obtain a zip/jar/exe that contains these classes? Or if they are obsolete,

  • I still need help!!!

    I've downloaded the trial version of Fireworks CS3 and it will not install. It tells me the required resources are missing. It does the same with Photoshop. I've gotta get this installed! Help me please!

  • Try to Reset my IPhone and all I get now is Apple Icon

    Can Someone help me With my Iphone. Try to reset all the information and now all I get is the Apple Icon but does not go any further.