IPad power supply with iPhone

Hi,
is there any document where Apple is saying that we can use the 10W iPad power supply with the iPhone?
Tnxs.

You bet. See below.
http://store.apple.com/ca/product/MC359LL/A?fnode=3c

Similar Messages

  • Help!!! How to get the recovery time of transient response of a power supply with Labview basic package without analysis option?

    How to get the recovery time of transient response of a power supply with Labview basic package without analysis option? Does anyone have any idea or some similar function SUBVIs?
    Recovery time of transient response is defined as the time from the beginning of the transient to the voltage point on the waveform fallen into 10percent of the overshoot. Well, the waveform is something like a pulse with a soft slope.

    I recommend plotting your data on a graph on paper. Take a look at the data, and determine what is unique about the point you are looking for. Look for how you can teach your program to look for this point.
    I have written several algorithms that do similar, one in fact being for a power supply, the other being for RPM. Neither algorithm used any advanced analysis tools. They are just a matter of determining, mathematically, when you achieve what you are looking for. Just sit down with your graph (I recommend multiple copies) and draw horizontal and vertical lines that determine when you get to the point you are looking for. You are probably going to have to reverse the array and start from the end, so think in those terms.
    If you have trouble, emai
    l me a bitmap of the graph, and what you are looking for and I will try to be of further assistance. Don't do that however; until you you have given this a few tries. Your solution should be involve a lot of logic on analog levels.
    Good luck

  • Can I use the old power supply with the new unit?

    I have a second generation Apple TV. When I install the new unit next week can I use the old power supply with the new one and the new power supply with the old one? This would save some messing with cords behind the units.

    Hello:
    I would definitely not try that.....  The power supplies may be compatible - or may not be compatible.  I think messing with cables is a small price to pay for not potentially frying a new device.
    Barry

  • Text on ipad not syncing with iPhone at all times

    text on ipad not syncing with iPhone at all times

    Same with me. It used to be that Books would sync with my iPhone, but it seems that since IOS 5 came out they don't sync any more. Everything else syncs fine through iCloud; iPhone 4s & IPad 2.

  • CAMTEC power supply with USB interface

    Has anyone already controlled a CAMTEC power supply with an USB2.0 UI.Drive-Interface by LabVIEW ?
    Many thanks in advance for any advice.
    Solved!
    Go to Solution.

    JB wrote:
    Has anyone already controlled a CAMTEC power supply with an USB2.0 UI.Drive-Interface by LabVIEW ?
    Many thanks in advance for any advice.
    Looks like you'll need to call a .NET DLL unless they wrote some wrapper LabVIEW VIs .

  • Is the power supply for iPhone 3G only 120v?

    Is the power  supply for iPhone 3G only 120V

    This is all true.
    The iphone 3G can only be updated to 4.2.1.  It will not support any version higher than that.

  • Can I use the iPod Nano cable and AC power supply with the iPhone?

    Just purchased my iPhone 3G. Phone was in my pocket and the AT&T clerk neglected to put the box with the computer cable in the bag with the other accessories.
    Until I can pick it up, can I use my iPod Nano cable? The plug seems the same size but I don't want to break anything.
    Also, there was no power supply in the box due to the recall. Can I use the iPod AC power supply I bought for the iPod? It is the white brick about 3" by 3" by 1" with a USB socket in the side.
    Thank you for helping me with my start-up glitches.

    Ps. When you do get the accessories, look for a green dot (on the side where the prongs of the plug come out). If there, fine; if not, your adapter is subject to the recently announced recall of ultracompact USB adapters.

  • I need guidance in choosing an xterm all portable power supply for iPhone 5 and iPad Air.  Can U help?

    Traveling intl.  Need a rechargeable external power supply.  I can't find any restrictions in choice.  Need to chg iPad Air and iphone5.  Any thing to avoid?  Any advantages in specific choices/brands?

    DNArizona wrote:
    No charger at my seat on the plane.. 
    How many planes routinely stay in the air for the 8-10 hours your battery lasts?

  • HT4623 I selected the latest update to OS 7 and it seems to have stuck.  I have an image of the power supply with an arrow pointing to iTunes on my screen.  I do not know how to move from that point.  Never have seen it before.  Anyone help?

    I am trying to upgrade to lastest release.  It seems to have stuck because I have an image of he power supply plug with an arrow pointing to the iTunes on the screen.  I have never seen this and want to reboot or restart or something.  Anyone help?

    I have this very same problem, have you gotten any thing to help? I hit update on the iPad and then it froze...rebooted and got the screen you described.
    "I am trying to upgrade to lastest release.  It seems to have stuck because I have an image of he power supply plug with an arrow pointing to the iTunes on the screen.  I have never seen this and want to reboot or restart or something.  Anyone help?"
    Message was edited by: rfdeaton

  • How to recognize fake power supply for iPhone?

    Hello,
    last year in August I purchased at Amazon a "original" power supply plus USB-Cable for my iPhone 3GS. Now this thing sometimes works and sometimes it doesn´t. I called the vendor but he sees no responsibility for the artivle because it is out of warranty.
    I told him that to me (and by comparing with other Apple-Hardware) the article looks pretty fake and therefore it does not matter if it is out of warranty or not - he sold fake hardware with "original" labeling on it.
    Now I would like to verify my guess and see if this thing is fake or not. Do you have any idea how I can do this or what I should do now?
    Thank you
    kcn

    To some extent it depends where the OP lives.  In the UK and the EU warranties are expected to be for two years (though Apple still advertises one year).  There are however, different definitions about what a manufacturing fault is.
    Apple (United Kingdom) - Legal - Apple Products and EU-wide Consumer Laws

  • New apps purchased on ipad not synching with iphone 4S.  This a new problem.  No problem in the past

    Purchased new apps on ipad.  Purchases did not synch with iphone 4.  Purchases are listed in my itunes account and on my ipad, however, they are mot listed as purchased on iphone 4s.  this is a new problem.  I did not have any probelms in the past wit apps synching with iphone 4.

    It does, but I use the SoundNote App because it records audio and allows me to draw diagrams in the document. Any thoughts on syncing the SoundNote files to the mini? I am sure it can be done with a wire, but I have a disability which makes it difficult to plug and unplug cords, so the more I can do wirelessly or through the Cloud the better. Thanks for your help! I am really grateful.

  • Using iMessage with iPods/iPads and SMS with iPhones

    I prefer using SMSs to text other people with iPhones but I still want to use iMessage to chat with people who own an iPad and an iPod. What do I do? I don't want to desactivate iMessage.

    The only way I know to do what you want is to disable/enable your iMessage account as needed.
    Of course, every time you disable and then re-enable iMessage in message settings, you may have a "pause" while it re-activates your iMessage account.
    Out of curiosity, why do you even want to do this?  The integration of iMessage is intended to be seemless - if the devices at each end can use, it will be used, but if not a regular SMS is sent.  You can force it as you wish, but it will be a pain in the rear to do, if you ask me.

  • Looking for software driver for HP 6655A Power Supply with Labview 5.1

    Hi, trying to control an HP 6655a Power Supply but the version of Labview in the PC is the old Labview 5.1.
    I don't want to upgrade it for fear that the program will no longer function. Does anyone have the driver for the HP6655a that will work with labview 5.1?

    Hi demo,
    Try the drivers directly from Agilent.
    Here is a couple of links:
    http://we.home.agilent.com/cgi-bin/bvpub/agilent/editorial/cp_MiscEditorial.jsp?OID=536913992&NAV_ID=-536891584.536882066.03&LANGUAGE_CODE=eng&COUNTRY_CODE=ZZ
    Click on> Driver: 665xA Series Instrument Drivers
    Maybe this one is better... it's older...
    http://we.home.agilent.com/cgi-bin/bvpub/agilent/editorial/cp_MiscEditorial.jsp?OID=536917365&NAV_ID=-536891585.536880265.03&LANGUAGE_CODE=eng&COUNTRY_CODE=ZZ
    Click On > Driver: DC Power Supply Instrument Driver (1.13 MB)
    You may have to import the instrument driver after you install the libraries. This is done by selecting from the pull down menu:
    Tools > Instrumentation > Import CVI Instrument Driver
    JLV

  • Help Using Labview to control Kikusui power supply with a PIA4850 controller

    HI I need some help using Labview to control 4 Kikusui power supplies. We have a PIA4850 Kikusui power supply controller. I can use the visa test panel and see the PIA4850 but can see any of the power supplies. I have very limited use of Labview and only wrote a couple programs using GPIB. The PIA4850 is a USB controller and can control up to 32 PS. I can get it to work with a Excel demo software that came with the controllers so I know that it is working. Any help will be appreciated. I am using LabView 8.2 and have updated to the Ni-DAQ 9.0. I have a program that I need to incorporate the PIA4850 into once I figure out how to operate it. Thanks in advance.

    HI and thanks for the help. I did get one power supply to work but have another problem. I need to control 4 power supplies at the same time and can only operate the one that is addressed N5!C1. If I set the other to N6!C1 and so on I get an error stating
     “Error -1074135008 occurred at ki4800_2 Configure Voltage Level.vi Possible reason(s):IVI Error in the method "get_Item" in the component "Kikusui4800". E_IVI_UNKNOWN_CHANNEL_NAME: Unknown channel name (N6!C1)”
      I am assuming that I should be able to change the node number and that will change the supply that I need to use. Everything works great if I use N5!C1 I can change any of the supplies to address 5 and can control it with no problem. I can even have multiple supplies with the same address N5!C1 (don’t think I should do that) and change them all at once. I need independent control of each supply.
      I am in a pinch here and need to figure it out but could use some help. Any ideas will be greatly appreciated.
      Thanks
    GBlair
    Attachments:
    KIKUSUI PS.llb ‏179 KB
    Kikusui Ps Controller.JPG ‏63 KB

  • Can i use 85w 17" macbook pro power supply with the 15"

    My 17" macbook pro died so now i have a 15'' which i want to use with the 85w power supply as a spare for it. I'm guessing it would be ok but just want confirmation. Can anyone help?
    DUH ! of course I can ....sorry for the post

    Yes.
    JC

Maybe you are looking for

  • Ordering photos in Web Gallery

    I would like to impose an arbitrary order on a Web Photo Gallery. What is the recommended practice for doing this? Add a metadata attribute and sort on it? Rename the photos including an order field in the name? I tried simply dragging and dropping.

  • Graphics in album view

    I finally caved to the weekly reminders to update all my software on Leopard. When I first started Safari I thought I sa a prompt about loading or viewing graphics in cover view and I just clicked 'decide later' Anyway some of my favs show al 'album

  • Restricting values of charcteristics in the Variable

    Hi I have a charcteristic with some values . I have created a varaible which shows all these values in the selection screen drop down. I only want 3-4 values from the given set of values of charcteristics in the selection screen

  • I can only quit firefox by using force quit, why?

    When another program is updating and requires Firefox to quit. It will only quit by force quit.

  • Can't install Mozilla on home computer - won't run InstallWizard.

    Installed Mozilla on work desktop without problem because BlackBoard seems to run better with it. Tried to install at home on laptop and it won't install. I get through "Run/Save", "Do you want to run this software?", and "Extracting" screens but Ins