IPad shows "No Data" for Videos when I have movies stored.

Short version:
I've had lots of issues with downloading movies to my iPad from iTunes.  When it works, the "videos" section under Settings > General > Usage shows "No data" as if it's not reading the storage.  I'll have 6 movies but it shows nothing stored on the iPad.
Detailed version:
I'm on my 3rd or 4th try of "Erase all settings and content" without using an iCloud back up.  My 3rd gen iPad will work fine for a month or more after that then start having tons of problems with downloading movies and performace.  I'll set a movie to download from iTunes, go do something else and my iPad will become so slow its unusable.  The downloads will fail but not alert me, they just restart and loop repeatedly.  As of now it's working fine but my third party warranty is running out and I need to decide if somethings really wrong with it or is this an issue with iOS 7.  I've taken it to the genius bar, the guy suggested I plug it into iTunes, download a fresh OS and start over again.  Since then, its been largely fine.  Only one movie failed and tried again then worked.  The performance has been fine but I've been burned by this before...its fine for a while then goes to complete crap.  I've also had the WIFI showing as connected but will not recieve any data until I simply restart and its fine.  This has happened every time I've reset so its not isolated to one glitchy install.
I've asked for help before but no one has ever replied, if someone can give me a suggestion whether to tough it out or make a claim and pay $50 for a refurbished iPad that would be very helpful.  If you need more details just ask, I've done all I can think of.

Bump - Can someone please help?

Similar Messages

  • How to show specific data for user on redirected page once they logged in

    I and fairly new, but have a general understanding of Dreamweaver. Using CS3 or CS4, how do you get the redirected page after the user logges in to show only the data for that user? I have creater the login page and it works fine but i dont know what needs to be on the redirected page for it to show only the data for the user that just logged in.
    I am not very good with the coding part so if it requires it any help with that would also be helpful.
    thank all.

    I should be able to get the understanding if explained.
    As for scripting i believe its PHP. at lease thats the page i created the login page with.
    As for user-specific information: basiclly there account information.
    As for database i have dreamweaver linked to a MySQL database. it pulls from 2) tables
    1st table has the following: ID - User Names - Password  - account number
    2nd table has the following: ID - account number - names - address - ect
    So basiclly i want when a user loges in for it to redirect them to a page which then only shows the data for that users. if i can link the data the pulls up by the account number that would be ideal
    Thank you Murry

  • Onlive TV listing does not show HD listing for series when I try to create a recording

    It happened now already several times the the "Online TV Listing" does not show HD listing for series when I try to create a recording. Instead, it will show two series options in SD. Is this to make people use less bandwidth?
    Here is what I am doing:
    I go to this link  https://www.verizon.com/fiostv/myservices/members/fiostv.aspx
    Then to ...........DVR Manger
    select  ...........Record A Show
    I type search e.g. Nathan for You
    I click on ........Search
    and I select ......Click here to Show Details
    Then I get to chose from 2 (the same) SD channels.
    Nathan for You
    190 Comedy Central
    Tue, Jul 29 10:30 PM
    Record Show Record Series
    Nathan for You
    190 Comedy Central
    Tue, Aug 05 10:30 PM
    Record Show Record Series
    But there is the same on channel 690 HD!
    This happens not only to this particular channel!
    I remember it used to show also the HD channels.
    The only way to schedule in HD is to find the listing in the TV schedule, at the right time and there you will get the
    correct choices for both SD & HD.
    Can this be fixed?
    Thanks!

    On the right click on HD under video quality to filter it. 

  • LastDataRefresh(ROLLUPTIME)-does not show correct date for multiprovider

    Hi,
    The Last data refresh (Rolluptime) shows incorrect date for multiprovider and we use lot of multiproviders.
    Removing the last data refresh from the "Information" button of the Bex Web Analyzer which is using the "Information field web item",  shows an empty space and a colon ":" and an empty box.
    Please let me know if there is any other way to remove the last data fresh without showing the empty space.
    We are on SPS 7 and FEP 7. Is this problem still exist in SPS 8/FEP 8?
    Thankyou,
    -Sini
    Message was edited by: Sini Kumar

    Depends on your definition of correct. Your initial question was that this time does not display. This time should display. For a multprovider, it uses this formula
    first(last(<All InfoProviders under Multi - ROLLUPTIME>))
    It uses the earliest rollup time from the last rolluptime of all the base providers.

  • How to set the filter on a report to show the data for the Current Month

    Hi all,
    I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
    Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
    Any help would be greatly appreciated!
    Thanks,
    AA

    You need to add a session variable to date fir worked assuming that this is a date field.
    To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

  • Time Series Graph Show Inappropriate Data for Continuous Analysis

    Hi All,
    I have marked Month as the Chronological Key in my BMM Layer but still I am unable to view the data correctly in my Time Series graph because it shows Inappropriate Data for Continuous Analysis at the time of creating the Graph. Can anybody help me out with the same.
    Thanks

    What data type is your key? The chronological key is required for the time series formulas (ago etc.).
    The time series chart requires a date or datetime data type to work - perhaps a new column with the first of the month/period would help? Regards,
    Robret

  • How do I stop Imovie from automatically searching for videos when I open up program. I can't do anything when this happens. I checked my pref and it's not set to automatically do this.

    How do I stop Imovie from automatically searching for videos when I open the program. It will not allow me to do anything and I cannot start a new session.

  • I updated my ipad to ios 8 and now my ipad is locked asking for activation when i put it doesnt accept my apple id do you have a solution?

    i updated my ipad to ios 8 and now my ipad is locked asking for activation when i put it doesnt accept my apple id do you have a solution?

    Did you by this iPad new? Or used? If it was a used iPad, you'll need the Apple ID login for the original owner. If you bought it new, contact AppleCare with proof that you are the original owner and they may be able to help you.

  • Why doesn't the iPad pick up my camera videos when it syncs with my computer?

    Why doesn't my iPad pick up my camera videos when syncing with my PC?

    Some people have fixed this with a simple re-start of the phone, others needed to reset the Phone.
    Regards
    TD

  • Error 0x80090318 and lots of other errorsI live in Iran  Yesterday i wanted to use itunes store for windows ; when i have open itunes it gives me the error 0x80090318 .  I have search the wb alot and i have check lots of Iranian and English website but ha

    I live in Iran
    Yesterday I wanted to use iTunes store for windows ; when i have open iTunes it gives me the error 0x80090318 .
    I have search the web alot and i have check lots of Iranian and English website but have not find any solution for
    this problem . Today I have find a software called "Hide my IP" i have opened up that
    when this software was opened , itunes have said "iTunes can't verify the identify of the server "init.itunes.apple.com"".
    then i have click on "continue" then iTunes said "iTunes could not connect to the iTunes Store. An unknown error occurred (310)."
    And theres a matter that i think that have a connection with this topic and thats , that when i want to go to the lots
    of websites like Google Yahoo! Mail and lots of other website my both browser ( FireFox and IE ) will say" This connection is untrusted " .
    I think the solution of my second problem is the solution of my first problem too !

    Tried all the rest on this site did not work for me
    Follow the link below & this one sorted it for me, it was a conflict in programs using Winsock & I got rid of my old program,
    Sorted.
    http://support.apple.com/kb/TS4123
    Tom Ireland

  • Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

    Since ios 6 update hotmail fetches or push on its own. I have hotmail set to manual. Best I can tell its only hotmail and not yahoo. Is this a known problem? How do I make hotmail stop checking for mail when I have it set to manual?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • After installing IOS5 my iPad runs slower and crashes often when I have safari or any application opened. Is apple working on fixing this issue? is it happening to most of you or just me?

    After installing IOS5 my iPad runs slower and crashes often when I have safari or any application opened. Is apple working on fixing this issue? is it happening to most of you or just me?
    I appreciate any information you can provide. Using this device is getting annoying !

    I'm using mine right now to answer you and I've not had the issues you are having. Have you tried a Restore from Backup?

  • Ipad loses album artwork for purchases when syncing with iTunes?

    I have the latest software upto date for iTunes and my ipad.
    I usually purchase music directly from the iTunes app on my ipad as I find this a lot more convenient, however every so often I need to connect my ipad to my dell laptop to transfer non-iTunes songs.
    When I do so my ipad will always sync with my iTunes and when it does it comes up with a stage saying "copying album artwork", when this happens all my artwork from my most recent purchases on my ipad is deleted.
    The only way I have of rectifying the issue is to delete all the songs with missing album artwork and re-download them which is a lot of hassle.  I'd say the problem happens almost every time I connect my ipad to the laptop.
    Does anyone know why this is or if there's anyway I can turn of this part of the syncing process.  Or if I can just turn of the sync and back up all together, I much preferred it when all this was manual on old iPod classics and that.
    Thanks

    Hey, I was having this problem, too. The solution I've found is to go ahead and plug your iPad (this works with iPhones and iPod touches, too, I think) into your computer and check "Manually Manage Music and Videos." Then you want to click the "On this iPad" tab and scroll to the albums that are missing album artwork. Delete these manually and sync. Then you can uncheck "Manually Manage Music and Videos," check to sync music in the "Music" tab, and apply. After the sync your newest albums that you've downloaded directly on your iPad should be back in your library in the Music app with their album artwork displaying correctly.
    Not sure what causes this, but it seems to almost always happen to me when I use iTunes on my iPad or iPhone to buy things. Sometimes it also happens to items I've purchased from iTunes on my computer as well and that have automatically downloaded to my iOS devices.
    Hope this helps.

  • Search Item drop-down does not show any data for Advanced Search.

    Hi,
    I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
    1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
    2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
    3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
    Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
    I am using OAF version 12.1.1.
    Thanks, Suresh

    Hi,
    I faced the same situation but i still waiting for the solution.. this is my problem's thread..
    Addition of LOV Search Filter using Personalization
    But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
    I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
    Thanks
    Renu

  • Error Message for Videos when using 2 computers and 1 iPod Nano 5th Gen

    I have a 5th Gen iPod Nano and a PC (XP) and Laptop (Vista). I store my free digital copies of movies on the Laptop and all other media on the PC. I have both computers set to share iTunes libraries. When I tried to sync some TV shows from the PC to the Nano I got this error message: The iPod "xxxx" is currently linked to another iTunes library on the computer "xxxx". In order to copy the TV Show "xxxx" to this iPod you must link this iPod with this iTunes library. Doing so will remove 3 movies including 'xxxx' from this iPod.
    Questions: 1)Why only videos and not music or podcasts? No problems with any other syncing and don't lose my music from the PC when I sync movies from the laptop. 2)Is there a fix for this?
    I was able to do a work-around by copying the TV shows to a USB memory device and then transfering them to the iTunes on the laptop. I could then sync both the movies and the TV shows to the Nano.
    I'm new at this iPod stuff and would appreciate your input.
    Thanks.

    Does this problematic song play okay in iTunes?  Have you tried removing and resyncing it to your device via iTunes?
    B-rock

Maybe you are looking for

  • Excise invoice for goods return

    Hi We are working on ECC 6.0. When we try to create Excise Invoice through J1IS for Ref doc Type MATD for Material Doc of 122 Movement Type we are getting the following error - "GL account has not been assigned for PLA AT1 in customisation" Can anyon

  • Editing magento blog in dreamweaver

    Hello, I would like to create a blog for www.minhoticaonline.com.br and was wondering if anyone managed to use dreamweaver to edit/tweak the blog of a magento shop? tks

  • Fast moving stock list

    i would like to get fast moving stock items for monthly random checking ,please if you know any transaction code for that, i used the T-code MC46 for slow moving items but i couldn't generate any good report from it,please advice for tutorial how to

  • Link Between KONV and EKPO/EKKO (RFQ)

    Hi Experts! We are developing a canvass sheet and the customer requires that the discount amount (both item and header) be displayed in the report. We know that the table for conditions is KONV. However we cannot find the link between KONV and EKPO/E

  • Non-printing text frame for use in exported pdf

    Hi everyone, I have a couple of words in a text frame and I've set the text frame to be be non-printing in the attributes panel. I was hoping that by doing this, that when I exported to pd, it would show in the pdf file but not print, but as it happe