IPad stuck after doing a restore to Factory settings.

I bought an iPad from someone and they didnt restore it to factory settings. So I went to general settings on the iPad. I selected erase memory and rest settings. It has been running for about 20 hours. Is this normal and if not ,what do I do? Thanks

No, a restore to factory setting takes but a few minutes. So something is wrong. I would force quit the iTunes app and disconnect the iPad from the computer.
Then run Apple Software Update on your PC and make sure that you are using the most up-to-date version of the iTunes app. If Software Update shows new versions of both iTunes and QuickTime, do not install them together. Windows users report issues with this, especially with XP. Install QuickTime first. Restart your PC. Then install iTunes second and restart your PC.
While doing the above, try to fully reset the iPad. Press the Power button and start the iPad. Then press & hold the Home and Power buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo appear.
With iTunes up-to-date, connect the iPad to the PC and try a factory restore again.
Let us know what happens. BTW, is this iPad 1 still under warranty?
Dah•veed

Similar Messages

  • Vista will not boot/install after performing a restore to factory settings on satellite l305

    I have a satellite l305 that i bought new thru walmart.com about a year & a half ago, and for the past few months it seems like there are more & more issues with this pc that are causing it not to work properly-everything from drivers failing-or even disappearing, in some cases-to  crashing into a blue screen everytime i insert a micro sd card into the slot.. My sound drivers are gone & even after i THOUGHT i downloaded them again, they still won't install or even recognize that they are there and then yesterday it suddenly stopped being able to fully load some of my fave games  that i play daily.. I have tried EVERY SINGLE SUGGESTION in EVERY  article, forum, help site, etc.,that i could find & even tried to get help over the phone from a pc tech here locally, and nothing has been able to fix my issues. I have done so many system restores from so many different restore points, installed updates, uninstalled updates, tried to install new drivers, rolled back drivers, started in safe mode to do diagnostics checks, entered BIOS & checked EVERY setting, reset all settings to default, checked error logs, etc., etc., etc...I have even completely disassembled my entire laptop & checked all wiring, fuses, etc., made sure everything was working, etc., So, finally yesterday I decided that it's gotta be something to do with a tech issue-probably with my vista home premium OS that came pre-installed at purchase, so i thought it best to just go ahead & go into the back up & restore & back up all my files onto an external hd using the file transfer wizard option inside the restore center, and then proceed into restoring the pc to it's factory, or "out of box", state. And i assumed i covered my bases by saving the back up-just in case...ohhh no-not the case at all!
    It did't even occur tp me to that i might need an actual BOOT disk for vista after the fact. I just assumed that "out of box" meant just how it originally came-WITH vista pre-installed & ready to set up-like it did the day i bought it! i also was under the assumption that, isnce it never asked for a product key or anyting to activate vista then, that it wouldn't need one now either. But anyway, so this is where i'm at now-after i did the factory restore & turned it back on, it said to wait while windows finishes installing-but it never finished, then finally about an hour later, it said that windows was unexpectedly interrupted during installation & did not complete, and for me to restart pc to try install again. But after i did that, it was the same thing over & over. it NEVER installs!
    So then i decided to go ahead & "restore windows using back up image" that i created on my external hd prior to  the factory restore, thinking that  it would just kinda pu **bleep** all back, but thats not working either. it recognizes the drive, and takes me to a menu where i can actually even view all the files on the drive and even tho they are known by my pc to be back up files, it still won't associate them to being back up files to MY PC!! I even got desperate enough to find a site that claimed to offer a free vista boot disk in the form of an iso image that i burned onto cd & tried to boot from as well. That actually took me to an install screen for windows & all the way to where it asks for product key-which DID NOT come locatedon any sticker anywhere on my laptop, and because they DID NOT include any OS utility, install, or boot disks with the purchase of my laptop, i don't know what the product key is OR where else i might be able to find that info, and i WILL NOT pay for ANOTHER ONE,  just because they were too lazy or cheap to send  the disks with the pc! so i tried to skip this step till later, but when i skip it, it shows anpther error saying that install was terminated & could not finish install & if i wish to continue, for me to restart my pc & re-attempt install..WHAT IS GOING NE WITH THIS AND WHAT CAN I POSSIBLY DO TO JUST BE ABLE TO USE MY LAPTOP AGAIN?? HELP ME PLEASE SOMEONE!!

    Hi,
    I do not really understand... Did you made a backup before restore to factory settings? And did you copy all backup files to an external device? If not, the data is gone!
    Why? Restoryng to factory does not mean a reinstallation. It means to fill the whole harddisk with an image of the first (factory) installation. All other data will be destroyd! Other partitions are deleted and normally you find only one big partition - the whole hdd.
    If you have a complete backup on external drive and it is corrupted during restore, try to open the files manually. Maybe you can restore some single files.
    Good luck
    kind regards
    Stefan

  • Is there anyway to reset ipad passcode without having to restore the factory settings?

    My little brother has locked himself out of his ipad. Although I am aware we can restore the factory settings he would very much like to save his photos.
    The ipad has never been synced or backed up.
    Is there anyway to do this?

    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

  • HT1551 How do I fix a 2nd generation Apple TV that does not restore to factory settings after a failed installation of software update 6.0?

    Yesterday, I got asked by my 2nd generation Apple TV if I wanted to update download and install the new software update. I clicked "Yes" and the download and installation process began. Nothing out of the ordinary happened and when the installation completed the Apple TV automatically rebooted itself, which is what has happened with previous software updates.
    Alas, after reboot, the only thing that appeared on screen was an old iTunes logo (the one with the CD in the background) and what looked like a USB cable. I went online and found out that other people had been experiencing similar problems with the newly released Apple TV 6.0 update and that they had also ended up with the same image on their screen.
    As it turns out, this image apparently means that you need to restore your Apple TV to factory settings by hooking it up to your computer using a micro-USB cable and then using iTunes to restore it in a way analogous to restoring an iPhone via iTunes.
    I followed all of the instructions to the letter such as disconnecting my Apple TV from all cables including the power cord and then hooking it up to my computer with the micro-USB cable. I opened iTunes and absolutely nothing happened. The Apple TV does not appear as a device so I am not able to restore it.
    I have attempted rebooting my computer and leaving my Apple TV disconnected for a while before hooking it up to my computer since it apparently has an internal baterry that keeps a charge for about 30 seconds after being disconnected. Nothing has worked.
    Any ideas on how to fix this?
    System configuration:
    Apple TV 2nd generation running update 5.3
    iTunes version 11.1 (126)
    Mac OS X 10.8.5 on an Intel Core 2 Duo

    Did you follow the instructions here:
    http://support.apple.com/kb/HT4367
    Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.
    Also some microUSB leads don't seem to work - try another if you can. Disconnect superfluous USB device/hubs too if possible.
    AC

  • Ipad mini needs to be restored to factory settings after ios7 what will i lose

    young daughter updated ipad mini with ios7.3. ipad now showing only itunes logo and image of connection to computer.  connected to computer and itunes saying that ipad is in recovery mode and must be reset to factory settings and i will lose all data.  It also says that ipad software is up to date. Not sure what to do, any suggestions?

    If it is showing that message, there is no other option other then to restore it in iTunes.  That process will wipe everything off it and return it to as it was out of the box.
    If you have backups in iTunes or iCloud, you can restore from those once it is working normally again.  Anything other than audiobooks purchased from the iTunes or App stores can be re-downloaded if needed.

  • IPad will not update or restore to factory settings.

    My iPad Air is stuck in recovery mode. I was using my iPad to watch Netflix when all of a sudden the screen display had lines going through it and then the device shut off. I plugged it in to charge, since it was almost dead and left it for a few hours. When I came back and tried to turn it on, it would not turn on. After a few attempts it did. and seemed to be working fine for about 5 minutes, until I tried to close a few apps, and same thing happened, lines through the display and then turned off. I tried to plug my iPad in to my computer to update it, but it must have malfunctioned while updating because then it went into recovery mode. I tried to restore the iPad to factory settings and I keep getting an error saying it can not update or restore.
    I then brought my iPad in to the Apple store for some technical support. The "technician" was less than helpful and only did what I had done at home: plug into computer and try to update & restore using itunes. Needless to say it did not work. He then told me it must be a hard drive problem and since I was 2 months out of warranty that I could get a replacement iPad for $299 +tax. I asked for the manager and of course "he was busy" and said this was my only option. I asked him how thsi could've happened and he told me he had no way of knowing and didn't know what caused these things to happen.
    I have been an Apple user for 10+ years and have enjoyed every product I have ever bought there. I am extremely disappointed that by me using my iPad normally, never dropping it, never spilling water on it and then their product failing that I have to pay almost $300 to get a replacement. It seems that this problem could not have been avoided, since they don't know what causes these things and that this was Apples fault for selling faulty products. I would have never bought the iPad to begin with had I known I would need to purchase a replacement only 13 months later.
    I am wondering if anyone has gone through something similar and if there are any other options for me.

    Did you put the iPad into Recovery Mode? Follow the steps in this Apple support document:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    It could be an internal hardware failure though, as the Apple technician explained. While not common these things do happen. If that's the case you options are to replace the iPad with an identical model using the Out of Warranty replacement process and paying the $299 fee or purchase a new replacement iPad.

  • I am selling my iPad 3, how do I restore to factory settings

    How do I restore my iPad 3 to original settings.  I purchased iPad Air, and am selling iPad 3.  thanks for your help. 

    Before Sellings iOS Device...
    If desired, move photos/videos off the Camera Roll: http://support.apple.com/kb/HT4083
    If desired, backup the device to iTunes or iCloud: http://support.apple.com/kb/ht1766
    Then, on the device...
    Settings > Messages > iMessage > Off
    Settings > FaceTime > Off
    Settings > iCloud > Delete Accout (this only unregisters and deletes it off the device)
    Settings > iTunes & App stores.  Tap the AppleID and sign out.
    Settings > General > Reset > Erase All Content and Settings
    Unregister your device at https://supportprofile.apple.com
    More Info... http://support.apple.com/kb/HT5661

  • HT4061 IOS6.1 corrupted during install. Ipad now wont boot, stuck in recovery mode. Wont restore to factory settings, get error 3194. HELP !!

    Hi.
    I have just tried to update Ipad to IOS6.1, but it failed during install. The pad now seems to be stuck in recovery mode.
    I have tried to restore to factory settings but I get a error code 3194
    During attempted restore the restore screen does not show the Ipad name, serial number or software version number.
    Any suggestions, I think it may need to be sent away to be repaired, and i fear this will be very expensive!!!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    From the above link:
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
        1.    Install the latest version of iTunes.
        2.    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
        3.    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
        4.    Try to restore from another known-good computer and network.
        5.    If the errors persist on another computer, the device may need service.
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • My iPad is glitching it goes from the Internet to the home screen with no warning I have completed a restore to factory settings still doing it. Please help

    My iPad is glitching it goes from the Internet to the home screen with no warning I have completed a restore to factory settings still doing it. Please help

    Setup as new (Factory Default)
    Settings>General>Reset>Erase all content and settings
    Note: if iPad still crash after setting up as new, it's time to make appointment with Apple.

  • My phone is stuck in recovery mode, and iTunes will only let me restore to factory settings.  My question: Can I restore from iTunes backup after restoring to factory settings?

    I attempted to update to iOS 8 and now my phone is stuck in recovery mode, and iTunes will only let me restore to factory settings.  My question: Can I restore from iTunes backup after restoring to factory settings?

    Hi, kformagg
    I would say yes. I once had the same problem (iPhone 5, IOS 7) and first restored to factory settings and after that from iCloud backup.
    It worked very well.

  • My ipad won't start up. I downloaded iTunes on my pc while my iPad was charging - could this have caused the problem? I don't want to restore to factory settings and lose data. Any ideas or solutions? Thanks, Linda

    My ipad won't start up.  I downloaded iTunes on my pc while my iPad was charging - could this have caused the problem? I don't want to restore to factory settings and lose data. I also recently successfully paired my ipad with a bluetooth keypad. Any ideas or solutions? Thanks, L

    FYI, your iPad will charge much faster if you plug it directly into an electrical outlet.
    When doing the reset, as Jackkcc suggests, make sure you let go of both buttons fairly promptly after the apple image appears, then wait another 10 seconds or so for the iPad to start up.  Note that a reset does not alter any data or settings.

  • I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them?  Can I back those up to iCloud?  My phone was very likely hacked (Apple's advice was to call the police!)

    "I need to erase the contents of my phone and restore to factory settings. Does anybody know how to save your texts so you don't lose them?  Can I back those up to iCloud?  My phone was very likely hacked (Apple's advice was to call the police!)"
    That was all I could put in the initial "box."  Then it brought me to this page with instructions on how to write a good sentence.
    Proceeding ...
    After going back and forth between Apple, AT&T and the police (all telling me to go to the other two) I took AT&Ts suggestion and got a new number. One tech warned against doing a backup, especially on my Mac, saying if my phone had been hacked then whatever bug was there would then invade my computer. But nobody knows how to determine if the phone has been hacked or a virus was planted there. Unfortunately I know who would have reason to do such a thing and all I can say is that he is at the top technologically and could easily do it. Almost impossible to prove, however.
    So I need to preserve my text messages and my emails as well. I backed up my photos to that Microsoft product (One-Drive) and it froze (Surprise, Surprise) with four short videos to go, and no way of stopping that (when I tried it crashed repeatedly) so I'm in crisis mode here.
    Help ...
    Running 8.0 on 5S
    Thanks!

    Betty I don't know if you fixed your hacking problem but I feel your pain. I've seen some strange things going on between my iMac and my iPhone and Apple has told me the same thing, call the police which I have done. The hackers have stole 500.00 out of my checking account have access to every internet account I use and no matter how often I change the password their right back on the account. I closed my FB account 3 times only to have someone reopen it. Right now I've got a link in my reading list (Safari) that if I click on it, it allows me to log onto my FB account anonymously.
    I've seen a green folder come out of no where while I was trying to delete my passwords out of keychain when that green folder was put into the key chain I was immediately locked out. I than went into system preferences to try to make changes to my security settings, when I clicked on the icon it wouldn't open. I've seen log files of automator receiving commands and sending out my personal information thats on my computer.
    I have a legitamate program called iExplorer that allows you to look at the contents of your iPhone back ups and saw a transaction someone made at the Apple store for some full length movies, some albums, ibooks and other apps but when I called the iTunes store and they said none of those items were showing up on my account. If their not on my account how can they be on my iPhone 6? One day someone was using my gmail account and unknowingly used google maps to search for an Italian restaurant, than a Mexican restaurant than a coffee shop and their search showed up on my iPhone but I didn't have my gmail account installed on my iPhone 6. Using my computer I logged onto my gmail account and looked at the maps history and sure enough there were the searches when I'd hover my curser over the link it gave me the longitude and latitude of the where the hacker was when he was using google maps. I know whoever reads this thinks Im crazy but I've documented everything and can prove the things that I have mentioned in this post actually happened.
    One day I had my laptop (pc) and my iMac next to each other as I was using both. when I clicked on airport it showed that my laptop and my iMac had made a connection and were actually communicating with each other. I know I didn't do it I don't know how. The iMac was logged into my iCloud account while my laptop wasn't. I have formatted my iPhone at least a dozen times, Apple and an Apple retailer have formatted my hard drive not to mention the numerous times I have formatted it but the hackers keep getting on my devices. Im formatting my lap top at this very second because during the course of the night I left the ethernet cable plugged into it and they locked me out of my c: drive, and configured the system so I can't download any updates from Microsoft, overtime I type in www.microsoft.com it changes to ww38.microsoft.com which takes me to a blank page. I right clicked on the page I was redirected to and read the java script and couldn't believe that someone had actually configured Internet Explorer to redirect me to a blank page when I tried to go to Microsoft. Apples answer to all this is there was nothing wrong with my iPhone or my iMac and if I thought there was a problem to call the police which I have done.
    Theres no doubt the hackers are reading this while I type it or will read it and I simply don't care anymore. I no longer email anyone, don't use my iCloud account and have taken precautions to protect my credit but if I ever find out who has invaded my privacy to this extreme the police are going to want to talk to me because Im going to hurt them like they've never been hurt before

  • Ipod wont show up in itunes after i restore to factory settings

    My ipod does not show up in my itunes list but it shows up in my computer as a drive
    it all started when i got my ipod back after getting it fixed ( it was a problem with the battery) well it said that i needed to restore the factory settings so i did then a message came up and said your ipod is now restarting it will come back to your iptunes list after it has restarted.... but it didnt
    and now when i plug my ipod in i get a bubble come up that says:
    "windows was unable to save all the data for the file F:\iPod_control the data has been lost the error may be caused by a failure of your computer hardware or netowrk connection please try and save this file elsewhere"
    i have done everything i can to try and fix this (5 R's and such) but i have gotten no results
    please help quickly as i use my ipod all the time and cant function without it =]

    I have a similar issue.
    Mine shows in iTunes and in PC. It will also allow me to sync.
    But when I do sync, it runs fine for about 10 minutes, then I get an error similar to yours with a directory location. It keeps syncing and will periodically show the errors. Then it will lock up.
    I have run chkdsk, awindows utility (chkdsk [driver letter]: /R /F) over the iPod when it has been restored and it found nearly 400mb of bad sectors.
    I though this would fix the problem but is has not. When I run chkdsk over it again, it does not find anymore bad sectors (it does however tell me that it has 400mb of bad sectors logged.)
    I am banging my head against a wall trying to fix this, or even find out what the issue really is. I assume it is a dodgey hard drive, but I do not want to replace it and still have the problem.

  • I tried to update my sons iPad and now it won't turn on or off just a picture of a cable and I tunes symbol. Can it be fixed or is it broken I've seen posts saying their iPads died after doing updates.

    I tried to update my sons iPad now it won't turn on or off it shows a cable and iTunes symbol tried holding down sleep button & screen button but no luck does this mean it's Broken I've seen posts saying their iPad died after doing updates.

    It's not broken, it just means that the iPad has gone into recovery mode : http://support.apple.com/kb/ht1808
    You will need to connect the iPad, via its cable, to a computer's iTunes (you will need an up-to-date version of iTunes installed on the computer), and you should then be able to reset the iPad and restore/resync the content to it.

  • My 4G Ipod shuffle does not play songs in the correct order? Already restored to factory settings and no success.. Can anybody help me?

    My 4G Ipod shuffle does not play songs in the correct order? Already restored to factory settings and no success.. Can anybody help me?

    I FINALLY GOT IT! after months of relentless synching/autofilling problems on my 4th generation i figured out the solution.
    this is what i did: plugged in ipod on off mode~>manually deleting my ipod's songs~>restored factory settings~>unchecked automatic synch~>made a new playlist with exactly the songs & order i wanted for my ipod (just dragged old playlists into the new one)~>then autofilled that new playlist into my ipod. came out like a charm! (before u autofill UNCHECK random add songs)
    my ipod always ended up autofilling/synching my customized playlists wrong or it would automatically do my music library (and that was way unorganized), so this worked.

Maybe you are looking for

  • JNI double trouble

    Hi, I have written a java application which sucessfully access the cryptoAPI functions. I am trying to convert it inot an applet. I get the following error when i open it in IE. before java.lang.UnsatisfiedLinkError: no Msgimpl in java.library.path a

  • Unable to Activate Photoshop Elements 12 Reinstallation

    I uninstalled and then reinstalled Photoshop Elements 12 during a clean-up of my Win 7 computer. Now I can no longer run the program.  What I get is a message saying "Please connect to the Internet or adjust your clock and try again".  I was connecte

  • Smartforms: SFSY-FORMPAGES = star very strange

    Hi, I have a very strange problem: In a smartform i use as usually &SFSY-PAGE&/&SFSY-FORMPAGES& for numer of pages/total pages. If the spool has less than ten pages all is right, if it has greater than ten pages (in the example 14) i get that: 1/* 2/

  • Usage of  DragDrop Tags

    Hi , I have read the documentation of wlp 10.3 regarding drag drop tags but have not got the idea as of yet. How do i use them exactly ? after initiating the basic structure in the jsp using <dragdrop:dragDropScript/> i create a draggable resource as

  • Cross-Site Mail Flow Through Internet

    Hi, I have typical Exchange 2013 servers deployed in 2 AD sites. Currently, mail flow between the 2 sites are going through our WAN. Is there a way to force mail flow between the 2 sites to go through the internet?