IPad touch-screen sensor the does not work on one part of displey

I have problem with a part of the screen on my iPad. It seems like the sensor on the screen does not work. When draging items or webpages through that section, the dragging stops. It looks like the screen is not detecting my fingers on that part. Part of the screen that is not working is about 1 cm wide. iPad is 1 month old.
Message was edited by: micronola

Had the same issue with a 1cm strip from top to bottom (portrait) not responding. I did a backup, a complete factory reset, and then a restore of the backup. So far it seems to be working again!!

Similar Messages

My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphon

My iPhone's screen black, it does not work and I tied to hold press power and home press but it did not work? By the way for seconds I saw iTunes cabal simple, but unfortunately, I do not have backup for my iPhone in my mac, so how can I restore my iphone without loss my date?
Thanks

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

Why my ipod touch 5g crashes, it does not work and the touch after a type is loaded and will be locked?

why my ipod touch 5g crashes, it does not work and the touch after a type is loaded and will be locked?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Power /screen lock button does not work

Hello
I've bought an İphone 5 on january 2013 from NY,USA.But it's power/ screen lock butto does not work since last week. Now I'm in Turkey. What can I do for service support?Is it possible to get guarantee benefit in Turkey?I'm so desperate about this issue battery runs out so quickly, unwilling calls...please guide me to solve this problem...

Hi aslsfr,
If you are looking for more information on the service options for your iPhone in Turkey, you may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=Turkey&product=iphone
Regards,
- Brenden

Flash player does not work under one user account.

Flash player does not work under one of my user accounts.
My system: I work with a mac mini with Mac OS X 10.6.8.
What I have done:
I installed the flash player maybe one year ago under my "first" user account. At that time this user account had had administrator authorization. In the meantime I had to change this "first" user account in an account without administrator authorization and created an administrator user with which I installed different programms. Lately, the message came up that it would be necessary to update the flash player. I did it; under the "first" user account, but of course with the administrator's password for installing. The installation had been "successful" - so I was told. But it did not run. I tried it again and again. Each time with "deinstallation" first. No way; it did not work.
After asking Adobe for the reason of the problem, they suggested to install the programm directly under the administrator user. I did that (of course after deinstalling under the "first" user account) with the result, that flash player runs under my administrator and my "second" user account, but not under the first user account. There I am always told to update my flash player.
With this result, I talked to Adobe. So they told me to contact the producer of the operating software, since this would be a mistake of the operating software.
And here I am - full of hope to get help from you.
Thanks for reading. And thanks in advance for helping me.
Nanny FS

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

HT1409 I have done this but it does not work with one of my albums and I dont know why??

I have done this but it does not work with one of my albums and I dont know why??

That would be it. Sometimes you can tweak the album & artist names enough for iTunes to download matching art from the store, or you could add a bonus track featuring 1 second of silence and attach artwork to that, or you could convert the files to Apple Lossless.
tt2

HT201359 Paid for item on a game, got a receipt for payment, never received what i paid and the link to payment screen from itunes does not work

Paid for an item on a game, cost 55.00 quid, moneys out of my account yet what i paid for i have nothing.
On the email that was sent to me via itunes, the link does not work to discuss the problem.
Any help please would be great, cheers

You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

My ipod touch start/reset button does not work and the ipod is stuck on the apple restarting logo. what can i do?

.

If that does not work, try the other actions specified here:
iOS: Not responding or does not turn on

Thinkpad Helix - Screen auto rotation does not work (Issue 3/3)

Hi,
I have installed a clean Windows 8.1 on the Helix and have several issues. Putting them into several threads so they can be answered independently.
The first thing I did after installing the system (and critical Windows Updates) was running the Lenovo System Update tool and downloading everything.
Screen rotation does not work. In “Device Manager” I can see “C5621 gw Mobile Broadband Geolocation Sensor” and “Hid Sensor Collection”. The HID one has an exclamation mark next to it. Are there some drivers I need to download to make this work. I did of course check if screen rotation is not locked – it is not (I did turn it on/off a couple of times, without any effect). Manual rotation (using display settings) works fine.
Thank you in advance for any help,
Łukasz
Solved!
Go to Solution.

Hi Lukasz,
Try, in device manager, right click on HID Sensor Collection then uninstall. Reboot, and see if the driver is loaded properly, if not click on scan for hardware changes.
Vince.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

TS2634 After I updated my iPod touch with iOS6, it does not work with my Logitech docking station. Is this a problem with iOS6?

Does updating the 4th generation iPod touch with iOS6 keep it from working with a Logitech docking station/boombox? Nothing is wrong with the boombox.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
If it still does not work that means that the update broke compatibility. That happens sometimes. You will have to wait for an update to either iPod's iOS or the dock's firmware.

Search does not work in one of the site collections

The Search in one of the site collections in my extranet sites is not working. When I search it the does return any results, it's not finding anything. I went to search just the documents library it does not work as well. I didn't find any errors in the
log or event viewer. All other site collections the search work fine. There is no exclusion in the search rule. The site collection is set as searchable. The site has no crawlog log.
Any help?

No. I added pdf. The site collections is not being crawled it doesn't exist in any of these tables .msscrawlhistory
.msscrawlcontent
.msscrawlurl

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

Bookmark bar does not work on one of my computers - w XP

Firefox 4.0 - the bookmark bar does not work. It appears but will not accept drags.
PC w Windows XP - 3.
Another thing too - The open new tab does not show up at all, in order to open a new tab I had to put the "open new tab" tab into the navigation toolbar.
(Works fine on my other computer, & it drives me nuts to have to use Firefox w 2 different setups...)

What's the URL of your site so we can examine it first hand? Have you tried republishing your site with the File ➙ Publish Entire Site menu option?
OT

Tried to update the software on my i pod touch and now it does not work at all and wont restore either

tried to update software on i pod touch but would not work and now ,wont restore back to factory setting or anything

Without more information all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Share Screen on ARD Does not work unless the user is logged on

Since Upgrading to Lion, I have been unable to get the Share Screen in Apple Remote Desktop fuction working from Any machine. All Clients are on the latest agent of ARD and are completely upto date.
When i try running the task when the clients are at the login screen, They just get a grey bar at the top of their screens. So it is recieveing the share screen task but not updating the image on the client machines.
The only alternative is to get the users to login before we start the share screen task in ARD. The issue with this is teachers prefer to be able to put work onto the screens before the pupils have a chance to log in and mess around on the machines.
I have tried downgrading to ARDagent 3.4 on the clients, i have also tried turning off remote management and enabling again, like some have suggested.
It would be great if someone has found a solution to this.
Thanks.

To get better help sooner, post a [_Short, Self Contained, Compilable and Executable, Example Program (SSCCE)_|http://mindprod.com/jgloss/sscce.html] that clearly demonstrates your problem.
To post code, use the code tags -- [code]Your Code[/code] will display asYour CodeOr use the code button above the editing area and paste your code between the {code}{code} tags it generates.
db

IPad touch-screen sensor the does not work on one part of displey

Similar Messages

Maybe you are looking for