IPad USB Code 43 in Windows 7

So I just got an iphone and upgraded the OS.   Now ever time I connect my Ipad to the Computer (Windows 7 Desktop), I get a code 43 error on the device.   Ipad and Ipod touch work ok as well.   Just the IPAD seems to not want to connect.
Seems to be a prevelant issue.  I have installed, uninstalled, power off (disconnecting the cord), no luck.  
Any real solutions?
thanks for the help

iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
 Cheers, Tom

Similar Messages

  • I am trying to set up my new iPad 2 and to begin I installed iTunes on my laptop and connected the iPad to the USB port. Neither Windows or iTunes recognizes the device. I did everything this site told me to try and still no luck. Help!

    I am trying to set up my new iPad 2 and to begin I installed iTunes on my laptop and connected the iPad to the USB port. Neither Windows or iTunes recognizes the device. I did everything this site told me to try and still no luck. Help!

    You will not be able to see what version you are running until the iPad is activated. It will be in Settings>General>About >Version when you can get to the settings app.
    The slider bar that you are describing sounds like the screen lock side switch and that has no bearing on setting up the iPad or connecting to WiFi.
    Why don't you try rebooting your router? Unplug it for about 30 seconds and then plug it in again and see if the iPad will recognize and join the network.

  • IPAD usb no longer recognized by itunes

    Why does the windows 7 PC not recognize USB from the iPAD in iTunes?

    Folks,
    I had this problem with my PC (windows 7, 64-bit) and my iPad. After messing with it for a long time, I finally found the answer (bad USB driver). The following two step process should help resolve these kinds of problems more quickly.
    The first step is to verify that the iPad (or iPhone) is really connected to your computer. This can be (really) checked using a program called USBDeview. You can get this (very small) program from http://download.cnet.com/USBDeview/3000-2094_4-10614190.html or http://www.nirsoft.net/utils/usb_devices_view.html. Don't worry, it's not Spyware or Malware.
    Just run the program and sort on the 'Connected' column. If your iPad or iPhone doesn't show up as Yes (under 'Connected') then your iDevice is not properly connected to your computer. Could be a cable problem. Could be an iDevice problem. Could be a USB hub problem. Note that your iDevice might be listed as what it is (iPad or iPhone) or it might be listed as 'Apple Mobile Device USB Driver' in the 'Description' column.
    Apple has a number of ideas to resolve this sort of basic connectivity issue, including switching USB ports, resetting your iDevice, rebooting your iDevice, rebooting your computer, etc. You will need to try them until your iDevice shows up in USBDeview as 'Yes' under Connected.
    If you iDevice shows up as 'Yes' under connected, it should also be visible in the Device Manager (found in the Windows 7 Control Panel under Hardware and Sound). You might find it under Portable Devices or it might be under Universal Serial Bus controllers.
    The iDevice may or may not show up in the Windows Explorer. On some machines it does, on others it does not. Why is not clear.
    If the Idevice is properly known to Windows and iTunes can't see it, then any number of other things could be wrong. Apple has a list. See the very useful page over at http://support.apple.com/kb/TS1538. Testing shows that the Apple Mobile Device service must be running. Check this using Task Manager (started by right clicking the taskbar). Note that the iPod service and the iphlpsvc service must also be running. These services have different names under the Processes table versus the Services tab of Task Manager.
    AppleMobileDeviceService.exe - Apple Mobile Device
    iPodService.exe                      - iPod Service
    ItunesHelper.exe                     - iphlpsvc
    Step 4 of http://support.apple.com/kb/TS1538 checks if the Apple Mobile Device USB is installed. This is essential and a common source of problems. In at least some cases, Windows will install the 'MTP USB' driver. Indeed, Windows will reinstall this driver if you uninstall it. The MTP USB driver is essentially a Windows bug (possibly caused by Microsoft). You must replace the MTP USB driver with the Apple Mobile Device USB Driver. Step 4 explains how to do this. Note that you must use the 'Have Disk' approach. Otherwise, Windows will just reinstall the invalid MTP driver.
    The Apple doc indicates that you can find the correct driver at C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. Perhaps this is correct on some systems. You may find the correct driver in C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
    iTunes could make this a lot easier by checking if the iDevice is known to Windows (what USBDevier does) and if the Apple Mobile Device USB driver is properly installed for the iDevice. Sadly it doesn't perform either check. Note that iTunes does if some of the related services (see above) are actually running.

  • My bluetooth keyboard (Macnus 3.0) is recognised by my iMac but will  not pair?  I have paired it with my iPad using code 8310 but it still will not pair with my iMac.  Can someone help please?

    My bluetooth keyboard (Macnus brand - bought recently in Thailand)(similar to Mac small keyboard) will pair with my iPad using code 8310,and is recognized by my iMac but will not pair?
    There are very scant instructions with the keyboard and no mention of any code (the code was prompted by my iPad).
    I have followed the instructions but it still will not pair with my iMac!
    Can anyone help please?
    My iMac is 20 inch  Mid 2007 OSX10.9.1 4GB RAM

    Hi All, thank you for you suggestions.  I have been unable to find any website for the maker, but have looked at several Thai/cambodian sites incl <http://www.buycoms.com/Article/8435/index.asp>  which mentions the keyboard being suitable for tablet or windows.  No mention of iMac!  although the box is branded to indicate Mac compatable.
    I'm thinking that maybe it just will not pair with an iMac.
    Ill keep looking for the maker website, which might come on later in the future? maybe?
    thanks again.

  • TS3221 Ipad error code 0xE8000024

    I tried to restart my Ipad last night and now it won't turn back on. When I tried to connect it to Itunes this morning I got this error code 0xE8000024. Any idea what could be wrong with my iPad?

    If connecting to Windows, look at this link...
    http://support.apple.com/kb/TS3221

  • Itunes not recognising 4S phone but iPad 2 is OK in Windows 7

    I have an iphone 4S, iPad 2 and iTunes for Windows 7. The phone is not recognised by itunes, but the ipad IS recognised. All devices have the the latest software versions. I have followed the troublesooting steps on the support forum, but nothing has changed the situation. In Device Manager, the Apple mobile USB driver is present ONLY when the iPad is connected. It disappears when the iPhone is connected. Any ideas? The phone is charging when connected to the PC, but that is the only communication occurring.
    The only thing I haven't yet done is the total re-install option. I'm reluctant to do this given all is OK with he iPad.
    Desperate for help!!

    https://discussions.apple.com/message/25631599#25631599
    we are a few with this problem. not a single reaction from the PC what so ever, exept the charging. may be just the iphone 4 and 4S, what i have red so far.

  • HT1296 I have a question about transferring files, photos etc, from my ipad air to my PC Windows XP and visa versa

    I want to know how to transfer files between my ipad air and my pc Windows XP.  I know I can't use icloud because my windows is XP, but there must be some easy way, I hope to transfer files back and forth.  If you know of a way or an app, is it user friendly?

    The way that you can transfer apps can vary depending upon the apps themselves. Many apps use iOS file sharing with iTunes. Read about file sharing here.
    iOS: About File Sharing - Support - Apple
    Some people use DropBox to move photos, videos and other files back and forth.
    Dropbox - Dropbox for iPad
    There are apps that will move files back and forth using USB and WiFi.
    File Manager - Folder Plus on the App Store on iTunes
    And of course  files can be transferred via email.

  • How can i print all the contect of the code in sapscript window ? ?

    how can i print all the contect of the code in sapscript window ? ?

    Hi,
    Do you mean that you want to print the ABAP code to SAPscrip form ?
    Svetlin

  • How to install USB flash drive in windows 7

    Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.   

    Hi,
    Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
      http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&​cc=us&docname=c00033108
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can I use a time capsule as a usb drive on a windows 7 machine?

    Can I use a time capsule as a usb drive on a windows 7 machine?

    No, but you can use it as an Ethernet or wireless drive.
    (60698)

  • Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

    Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
    Sorry for the long title, first time poster here.

    This thread is pretty old, are you still having this issue?

  • IPhone is not appearing in iTunes 12, USB not recognized by Windows 8.1

    S.O.S
    My iPhone 5s is not appearing in iTunes 12.
    Windows 8.1 says "USB Not Recognized".
    iPhone not appearing in iTunes 12 on iMac and MacBook Pro as well
    iPhone can charge with no problem.
    Try different cables and same problem nothing changed.
    I had tried;
    Reset and Restart iPhone.
    Cleaned the charging input.
    Tried in 3 different computers.
    I can't perform the method like uninstall/reinstall the USB driver on my Windows because in my Windows the USB showed unrecognized instead of "Apple USB/iPhone USB" on Device Manager.
    P L E A S E    A D V I S E

    Hi Since ios 7 almost everything can be dropped over your WiFi When you charge your phone if Automatically backs up to iCloud If you have problems backup to iCloud over your WiFi Then Restore iPhone back to Factory Settings Use same Apple ID Then you will get all your apps & data back. We have 2 iPhones & 3ipads & have not used a pc for over a year with them. Cheers Brian

  • Printer is asking for an user acces code instead of windows login and password?

    I have been seeing the HP printers asking(LaserJet M4555 MFP, LaserJet 500 color MFP M575 etc) for user access code instead of windows login and password.
    One thing i have noticed  is that when this happens there is a slight change in the EWS page configuration at security -> access control.The device administrator tabe is unchecked as you can see below ehen this happens
    Have tried cold resetting the printer and restore facory settings but this does not works and some thimes it does works for a while but the issue is returing back.
    We do not need this access code promt instead we need the usual windows login and password that used be there originally.
    alsothis is how the settings look like after a cold reset somtimes when it does not  asks for user access code , the problem is cold rese does lways works and it reverts back ois original settings

    @munish259272 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • HP 5550 Deskjet + USB Print server under Windows 7

    I have a HP deskjet 5550 which still runs fine.  I use the printer as a network printer, at  first connected to my router. However, my latest  Thomson TG789 vn router does not support network printers anymore, so I switched to a dedicated network-to-USB print server set-up, using a separate Ethernet to   USB 2.0 Print Server device.  The printserver is connected to my network switch, and gets an IP address via DHCP.
    This works fine for  machines running Vista (and XP before) but for some reason not for Windows 7, while  the HP5550 Deskjet when directly connected via a USB cable to a Windows 7 machine works OK too.   When a print job is sent to the HP 5550 via the print server over the network, it looks like the printing is about to start, but the process halts at this point without further messages.
    Also the HP Print and Scan Doctor -  often a very useful tool - is in this case not able to make contact with the printer via the print server and to resolve the issue.
    This may just require a small tweak; Perhaps anyone else encountered this issue and has the solution?
    Thanks for sharing.
     Jan Dijckmeester

    I have a HP deskjet 5550 which still runs fine.  I use the printer as a network printer, at  first connected to my router. However, my latest  Thomson TG789 vn router does not support network printers anymore, so I switched to a dedicated network-to-USB print server set-up, using a separate Ethernet to   USB 2.0 Print Server device.  The printserver is connected to my network switch, and gets an IP address via DHCP.
    This works fine for  machines running Vista (and XP before) but for some reason not for Windows 7, while  the HP5550 Deskjet when directly connected via a USB cable to a Windows 7 machine works OK too.   When a print job is sent to the HP 5550 via the print server over the network, it looks like the printing is about to start, but the process halts at this point without further messages.
    Also the HP Print and Scan Doctor -  often a very useful tool - is in this case not able to make contact with the printer via the print server and to resolve the issue.
    This may just require a small tweak; Perhaps anyone else encountered this issue and has the solution?
    Thanks for sharing.
     Jan Dijckmeester

  • I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected.  I have to re-boot after and extended period of time please help

    I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected.  I have to re-boot after an extended period of time please help.  Thanks!

    I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected.  I have to re-boot after an extended period of time please help.  Thanks!

Maybe you are looking for

  • Is there a difference between the "teacher" and "normal" versions of CC?

    Hi, Are there any differences in the feature set (ie - less filters, not as feature rich, etc, etc) of Adobe Creative Cloud education version (in this case, I'm a teacher), and the "normal", more expensive version of Adobe Creative Cloud (ie - what a

  • Lightroom PSD export inconsistencies and other quirks...

    We are  a  professional imaging organization,  photoshop and lightroom experts (well, at least to our clients we are ..LOL)     We have been battling two very troublesome problems they seem to have been present in every version of LR3 we've used and

  • [SOLVED] pm-suspend doesn't work since Linux 3.7.6-1

    Hi, I have 8 GB RAM and no swap partition and use thus pm-suspend, but since Linux 3.7.6-1-ARCH, it doesn't work properly anymore. Suspending works fine, but if I want to resume, my external monitor stays black (my laptop monitor is always deactivate

  • When will new version of BI Beans be available?

    We'd very much like to have Query Builder and Calculation Builder functionality in the thin-client implentation of BI presentations. From other posts in this forum I've learned that the next version of BI Beans will have both of these. However, these

  • How to assign default cost center and G/L account in Purchase requisition

    Hi, While creating the  purchase requisition ME51N in account assignment we have to enetr cost center name and G/L account but every time we have to enter this how to assign this as defaut value , like cost center : MSMISC and account 42XXXXX.   REGA