Ipad use of dropbox and fonts

i just upgraded the new operating system for my ipad. I have then prepared a word document on my macbook and transferred it to dropbox so I can use it on my ipad later. the font has defaulted to times roman instead of futura i did it in. does the new ops system have specific fonts that will transfer to dropbox and be read the same on the ipad?

Is Sonic Wall an authenticated proxy?
If so, say good bye to most apps, many apps either fail silently on connecting or even crash behind authenticated proxies - even when the authentication details are supplied in the wireless config
I have iPads behind a smoothwall proxy (non-auth) and we have a proxy.pac file on our managment server.
This proxy.pac (http://ipad/proxy.pac - set in Auto ) directs all iPad traffic to the smoothwall proxy, rather then our default auth proxy.
Smoothwall can insert the authentication, and then direct it to your Sonic Wall

Similar Messages

My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?

My itunes on windows7 pc does not recognize new ipad. using same cable and usb port that works for my ipod. what to do?
Thanks

Have you updated iTunes with the absolute latest software? If you have not in a long time, your iPad won't be recognized.

When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

When I try to print from Numbers on my ipad using fingerprint app, the font size change automatically from document to document

FingerPrint is not listed as supported on this page: AirPrint Basics
You might check with the makers of FingerPrint.

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed. The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."

I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed.
The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."
Is there a way to get the Apple Configurator to try to re-download iOS 8?

Apple Support had me delete the image file from the following location:
~/Library/Containers/com.apple.configurator/Data/Library/Caches/com.apple.confi gurator/firmware/
The file name was iPad3,4_8.0_12A365_Restore.ipsw
I deleted this file and ran the prepare again and it download the iOS 8 ok and successfully prepared the iPad.

HT5192 unable to download ios 5.0 for ipad using windows 7 and itunes 10.1

I am unable to upgrade to ios 5.0 for my ipad. I am using windows 7 and my itunes is updated 10.1 it keeps timimg out and i get error message 3259. I already tried diacbling antivirus software

You've tried turning off all firewall and antivirus software ? If that doesn't work then you could try downloading the 5.1.1 update via a browser :
original iPad
iPad 2 wifi
iPad 2 gsm/sim
iPad 2 CDMA
iPad 2 new
iPad 3 wifi
iPad 3 gsm
iPad 3 CDMA
When it's finished downloading, in your computer's iTunes press and hold the shift key on Windows (command key on Mac) when clicking the Check For Updates button which should let you navigate to the downloaded file.

Can wife's iPad use my music and apps if authorized?

We have a new iPad for my wife but set up under my name to get all our apps and music already purchased under my name. Can I authorize her iPad so she can use my music and apps but set it up under her name on iPad? Since it is currently under my name we can't use FaceTime. I think the iPad FaceTime thinks I am trying to call myself when I try to FaceTime my iPhone. Please advise. Thank you

Tbox17 wrote:
So, I should keep the ipad signed in as me and then just change Facetime to have her email.
Yes. You can add another email address as her "contact at" email address (Apple will verify the email address) and then you can uncheck (remove the checkmark) next to your Apple ID email address on her iPad and she can begin using the new email address for FaceTime.
I have 4 devices setup using my Apple ID for shared purchases (including my Mac) and I can FaceTime with all 4 of them - from all 4 of them.

Is it possible to scan on iPad using iPrint app and then e-mail or upload resulting files?

I have an iPad2 with the latest iOS 4.3.2 update. My printer/scanner is the Deskjet 3050 / J610.
Scanning works great and the quality is very good. After saving the scan as a "document" (it actually got saved as a PDF file which I was very happy about) I have to do something with that document - I can either upload it to Dropbox, an FTP server, or anyplace else, or as plan B I could e-mail the document. But I can't figure out how to do anything with the resulting PDF after saving it to the Documents folder in iPrint.
Scans saved as images can be moved into the Photo Album and e-mailed from there - it's an unnecessary, clumsy step, but at least it's possible to get the image off the iPad. How do I get the PDF?
Thanks in advance for any suggestions.

you can definitely look into the Google Cloud Print as an alternative.
Here is the link where you can find out more information about Google Cloud Print
Thanks
Josh.C
Click on the BLUE KUDOS button on the left to say "Thanks"
Although I am an HP employee, I am speaking for myself and not for HP.

Using Other Languages and fonts in Photoshop and Illustrator

I would like to be able to type in romanian as well as english, and do not know how to type using special characters in photoshop and illustrator.
1)How would I go about doing this?
2) How do I upload new fonts to these programs?
Would very much appreciate some guidance, thanks!!

Crossposted in multiple places.
Answered here: [http://forums.sun.com/thread.jspa?threadID=5374086&messageID=10645087#10645087]

Sent Mail from IPAD using Mobile Iron and Exchange 2010

Hi all,
Not sure you can help me with this one but i thought i would give it a shot.
I am running Exchange 2010. Users can access email using iPad and other approved devices using Mobile Iron (onboarding app).
I had a user who received a HTML message wiht an embedded image, when he forwarded that image on (adding some comments) the recipients of that email where not able to the image as intended. the image was no longer embedded it was added as an attachment.
where the embedded image used to be it said;
"THe linked image cannot be displayed. The file may have been moved, renamed or deleted. Verifiy that the link points to the correct file location"
When the message was resent from a Windows 7 Outlook client it was received as intended.
I have not been able to reproduce the issue since. the email was received and forwarded in HTML format.
under Settings > Mail, I think there’s a setting called “Load remote images”, This is turned on.
Im pretty sure this is not a mobile iron issue but an message format issue.
Thanks in advance.

Hi,
Sorry for my interrupting.
Based on your description, I understand that forward an email with an embedded image from mobile devices, then
the image will display a “red x” (with error message as you find) when we receive this email in Outlook. Would you please let us know edition information of the Outlook which you use to receive the email? Meanwhile, please refer to following KB and
check if it’s suitable for current situation.
Images in email message disply a "red x" instead
of the image if the Cache value in the registry is incorrectly configured
If anything I misunderstand or any update, please don’t hesitate to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

IPad using Kindle App and Dictionary

I am using the Kindle App on my iPad and like the dictionary function there. I am reading books in english and italian and wonder if there is a way to change the dictionary so that I get english with english and italian with italian.
I downloaded an italian dictionary as a separate App, but that isn't currently "synced" to the kindlebooks.
Any thoughts??
Bob E.

The dictionary function is part of the Kindle app itself - it doesn't connect to any dictionary apps you mave have downloaded. It doesn't appear to be configurable at all. You may want to contact Amazon support for more information (or submit a suggestion which you can do via email direct from the app)

I uploaded a document from my PC to one of my iPads using the Cloud and Pages. It appeared on both my iPads as it should have. But when I deleted that document from one of my iPads, it did not delete from the other iPad. Anyone know why?

I have no other info to add other than it is my understanding that if both my iPads are connected through the Cloud, if I delete a document from one of them, it should automatically be deleted off the other one. Thanks

Use the Office for Mac and ignore using Parallels for that. If you have PC only apps you have to run that are MS Windows only then consider Parallels. Just transfer your main PC, using Migration Assistant. If you don't know how then simply read over Pondini's article called Lion or Mountain Lion Setup Assistant tips and look for the section on migrating from a PC. Millions have done what you are about to, it's far from leading edge these days, if you go to an Apple Store to purchase they will offer this as a service, something you might be interested in.

Text transitions and fonts disappear on iPad

I created a Keynote Presentation with text transitions and sans serif fonts. When i emailed it to iPad, the text transitions and fonts disappeared. It also viewed it as pdf attachment. The Keynote presentation was created on Apple desktop on iOS X 10.8.4 and saved down as Keynote presentation. Why does it destroy the text transitions and fonts when brought into iPad. The iPad does not have Keynote installed.

Why does it destroy the text transitions and fonts when brought into iPad. The iPad does not have Keynote installed.
Keynote for iOS must be installed on the iPad to play presentations.
Purchase it from the App Store: App Store

How to use filters on ios mobile devices (iPhone/iPad) using GPU rendering (Solved)

Many moons ago I asked a question here on the forums about how to use filters (specifically a glow filter) on a mobile devices (specifically the iPhone) when using GPU rendering and high resolution.
At the time, there was no answer... filters were unsupported. Period.
Well, Thanks to a buddy of mine, this problem has been solved and I can report that I have gotten a color matrix filter for desaturation AND a glow filter working on the iPhone and the iPad using GPU rendering and high resolution.
The solution, in a nut shell is as follows:
1: Create your display object... ie: a sprite.
2. Apply your filter to the sprite like you normally would.
3. Create a new bitmapdata and then draw that display object into the bitmap data.
4. Put the new bitmapdata into a bitmap and then put it on the stage or do what you want.
When you draw the display object into the bitmapdata, it will draw it WITH THE FILTER!
So even if you put your display object onto the stage, the filter will not be visible, but the new bitmapdata will!
Here is a sample app I created and tested on the iphone and ipad
var bm:Bitmap;
// temp bitmap object
var bmData:BitmapData;
// temp bitmapData object
var m:Matrix;
// temp matrix object
var gl:GlowFilter;
// the glow filter we are going to use
var sprGL:Sprite;
// the source sprite we are going to apply the filter too
var sprGL2:Sprite;
// the sprite that will hold our final bitmapdata containing the original sprite with a filter.
// create the filters we are going to use.
gl = new GlowFilter(0xFF0000, 0.9, 10, 10, 5, 2, false, false);
// create the source sprite that will use our glow filter.
sprGL = new Sprite();
// create a bitmap with any image from our library to place into our source sprite.
bm = new Bitmap(new Msgbox_Background(), "auto", true);
// add the bitmap to our source sprite.
sprGL.addChild(bm);
// add the glow filter to the source sprite.
sprGL.filters = [gl];
// create the bitmapdata that will draw our glowing sprite.
sprGL2 = new Sprite();
// create the bitmap data to hold our new image... remember, with glow filters, you need to add the padding for the flow manually. Should be double the blur size
bmData = new BitmapData(sprGL.width+20, sprGL.height+20, true, 0);
// create a matrix to translate our source image when we draw it. Should be the same as our filter blur size.
m = new Matrix(1,0,0,1, 10, 10);
// draw the source sprite containing the filter into our bitmap data
bmData.draw(sprGL, m);
// put the new bitmap data into a bitmap so we can see it on screen.
bm = new Bitmap(bmData, "auto", true);
// put the new bitmap into a sprite - this is just because the rest of my test app needed it, you can probably just put the bitmap right on the screen directly.
sprGL2.addChild(bm);
// put the source sprite with the filter on the stage. It should draw, but you will not see the filter.
sprGL.x = 100;
sprGL.y = 50;
this.addChild(sprGL);
// put the filtered sprite on the stage. it shoudl appear like the source sprite, but a little bigger (because of the glow padding)
// and unlike the source sprite, the flow filter should acutally be visible now!
sprGL2.x = 300;
sprGL2.y = 50;
this.addChild(sprGL2);

Great stuff dave
I currently have a slider which changes the hue of an image in a movieclip, I need it to move through he full range -180 to 180.
I desperately need to get this working on a tablet but cant get the filters to work in GPU mode. My application works too slow in cpu mode.
var Mcolor:AdjustColor = new AdjustColor();   //This object will hold the color properties
var Mfilter:ColorMatrixFilter;                           //Will store the modified color filter to change the image
var markerSli:SliderUI = new SliderUI(stage, "x", markerSli.track_mc, markerSli.slider_mc, -180, 180, 0, 1);   //using slider from http://evolve.reintroducing.com
Mcolor.brightness = 0; Mcolor.contrast = 0; Mcolor.hue = 0; Mcolor.saturation = 0;            // Set initial value for filter
markerSli.addEventListener(SliderUIEvent.ON_UPDATE, markerSlider);                          // listen for slider changes
function markerSlider($evt:SliderUIEvent):void {
    Mcolor.hue = $evt.currentValue;
    updateM();
function updateM():void{
    Mfilter = new ColorMatrixFilter(Mcolor.CalculateFinalFlatArray());
    all.marker.filters = [Mfilter];
how would I use your solution in my case
many thanks.

My bluetooth keyboard (Macnus 3.0) is recognised by my iMac but will not pair? I have paired it with my iPad using code 8310 but it still will not pair with my iMac. Can someone help please?

My bluetooth keyboard (Macnus brand - bought recently in Thailand)(similar to Mac small keyboard) will pair with my iPad using code 8310,and is recognized by my iMac but will not pair?
There are very scant instructions with the keyboard and no mention of any code (the code was prompted by my iPad).
I have followed the instructions but it still will not pair with my iMac!
Can anyone help please?
My iMac is 20 inch Mid 2007 OSX10.9.1 4GB RAM

Hi All, thank you for you suggestions. I have been unable to find any website for the maker, but have looked at several Thai/cambodian sites incl <http://www.buycoms.com/Article/8435/index.asp> which mentions the keyboard being suitable for tablet or windows. No mention of iMac! although the box is branded to indicate Mac compatable.
I'm thinking that maybe it just will not pair with an iMac.
Ill keep looking for the maker website, which might come on later in the future? maybe?
thanks again.

My friend downloaded iOS 5 to his iPad from my computer and all of my info including email went onto his iPad. How do I get it off his iPad and restore his stuff back on?

I was trying to download iOS 5 onto my friends iPad using my computer and all of my info including emails etc. synced onto his and erased all of his stuff. How can I get my stuff off of his iPad using my computer (he doesn't have one) and restore his apps etc?

If he doesn't have a computer and had no backup for his iPad he may be SOL. The entire time that the iPad has been on the market it was designed to be used in conjunction with a computer and iTunes - where all of the content should have been stored. The update to iOS 5 changes that now, but if your friend did not have a backup on a computer he may be out of luck with regard to app data, documents, settings, some saved photos, notes, calendar entries and more.
He can download all purchased content again as long as he uses the same Apple ID that he used to buy the content originally. You can also see if iTunes created a backup of his iPad contents on your computer from which you can restore his iPad. He will still have to download all apps, books, TV Shows, and music again. If he bought any movies, he will have to buy those again, they are not available as free downloads.
Launch iTunes on your computer and go to Edit>Prefernces>Devices and see if there is a backup of his iPad on your computer and start there.
But for the most part, your friend will have to start all over again - erasing all of your content - downloading all of his content - and then setting his iPad up again from scratch.

Ipad use of dropbox and fonts

Similar Messages

Maybe you are looking for