Ipad will not start after problems with update to ios5

Hi all,
after some problems with update to ios 5 my ipad 2 will not start anymore...
in itunes it is not visible - So restore is not possible... :-(((
there are only "reboots" on the ipad screen...
thank you for help....

Nothing works...
It is still the same since 7 hours :
apple logo appears then an empty progress bar and after that the spinning wheel for about 5 minutes...
apple logo appears then an empty progress bar and after that the spinning wheel for about 5 minutes...
apple logo appears then an empty progress bar and after that the spinning wheel for about 5 minutes...
and so on...
No chance to switch of the ipad...
No connection to itunes possible (Laptop and Dektop PC)
after several resets it's the same problem..........
ipad 2 | 32gb | WLan + GSM

Similar Messages

  • HT201263 Help.  My wife's iPad will not start up.  I updated it two nights ago (Nov 12) to the latest  IOS.  It seemed to update normally. However, today it will not start or give any response.  I tried to do a restore, but it will not let me do that.

    Help!!!!!!  My wife's iPad will not start up.  I updated two nights ago to the latest IOS and today it will not do anything.  It is charged and I've tried to access it through itunes to no avail.

    From your text, it's difficult to determine if the problem lies with the iPad or the cable.
    If the iPad still works, but you're having a problem with the sync, you may want to check all the cables and connections. If the iPad doesn't work (frozen or unresponsive), post and we'll go through the checklist together.

  • My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError     P1 : c000009c     P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Firefox will not start after a software update

    After software installation Firefox will not start and displays a message box that says that it crashed and can't start

    Installed latest Firefox v. 6 software.
    Drop box saying that Firefox could not start and had to shut down upon start.
    Yes, Firefox started with Shift and click of icon.
    I uninstalled software, re-installed and it seems to be working fine.
    Thank you for your help

  • IPad will not charge after IOS 7 update unless the brightness is dimmed,..Why?

    I recently updated my 4th gen IPad 64Gb to ios7. Previous to the update I loved my iPad and it worked flawlessly. Since updating the iPad now will not charge unless I dim the brightness of the screen, and slowly when it does. Why? Is there a way to remedy this?

    I do not know if it's iOS7 related or not. My 2 is still working. However, my first 2 was returned to best buy after the charging port on it died. So that can happen. ANd it happens with little to no warning. CHarges monday, doesn't on tuesday.
    As far as I know the issues with 'unsigned' lightning devices is just the cable, not the power brick, but there's no official word (nor do I expect one)
    Lightning cables have a little chip in them and if that chip isn't signed by Apple then your device kicks up an error but should still work.
    However since this is an iPad 2, that's not the case since 2's use 30 pin chargers, not lightning.
    Usually when a 2 doesn't charge, common troubleshooting is to swap out the charger, cable and outlet, to confirm or rule those out. Also to do the reset. (the soft reset that's holding down the sleep and home keys until it reboots). Also to look in and blow out the port in case there's some lint or such in there.
    Usually those things fixes it. If not, then it could be the port.

  • MacBook will not reboot after problem with Address Book

    I was using AB today.... I tried to go into preferences and it quit on me. The option came up for me to send a message to Apple but that disappeared too. I relaunched AB again - same thing. The next time I tried to go into preferences the application would not respond - force quitting would not work. I had to shut machine off and now it will not reboot at all.... Any suggestions?

    I am having a problem with getting the data on want on the address label and only that data.
    ie. I just want the name of the husband and wife along with their last name and mailing address.
    IF I have the spouse listed in the contact, and children listed in the contact I get an odd label printed.
    ie. instead of John and Mary Smith 1234 Hope Street Seattle, WA 98101 what ends up printing is:
    John and Mary Smith, Mary, Bill, Susan, Tom 1234 Hope Street SEattle, WA 98101.
    All those extra names makes the label font print smaller for those kinds of contacts. Is there a way to only put the information on the address label that I want?

  • My iPhone will not start after new software update. Freeze on apple screen

    I updated the phone software today through the new software update directly from the phone and it will not restart past the apple screen. I have tried a hard restart, no dice.
    wish I had waited.

    Got it back up and working by putting in recovery mode and restoring through itunes, but lost lots of settings and app. info. I took about 4 efforts to resync after restore, not sure why, certainly not smooth or intuitive. 2 hours of my life I wish I had back.

  • IPad will not start after reboot

    My iPad was sluggish this morning and would not make a Facetime call so I decided to reboot (hold power and home button until Apple logo appears)  Since then, my iPad stays on Apple logo and will not boot up.  This has been going on for the past 20 minutes.  Help...my iPad is vital to my work. 

    You need to put iPad in Recovery Mode.
    http://support.apple.com/kb/ht4097
    Note: Data will be lost

  • HT201210 my Ipad will not restore after trying to update what do I do?

    I tried to update my Ipad to 6.0 .  NOw I am getting an alert that was unable to restore!!!  What do I do?  All I was trying to do was add some music to my IPAD!!

    Did you get an error #? What iOS version are you currently running?
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • HT1695 Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown  and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

    Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown  and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?

    Hi! I am having the same problem. What's odd is that a few days ago- the ipad was connecting to the network fine. No changes made. Other devices can connect to this network. I have also been able to connect my ipad to other networks.
    I have reset all network settings, reset my ipad, reset the router, hard stop reboot, turn on/off wifi connection. what's interesting is that when i click the arrow next to the network i am trying to log onto- the ip address, router, and dns numbers come up automatically and the router number does not fill in (also- this process takes a long time- at least 5 minutes).
    any thoughts?

  • HT4623 my ipad will not start and i get a itunes message with a plug  and music note symble

    My ipad will not start up and i get a plug and music note symble displayed what can i do I already tried the soft boot

    You are in Recovery Mode; follow the instructions to recover iPad.
    http://support.apple.com/kb/ht4097

  • HT201274 My ipad will not start

    My ipad will not start. 
    I have to do a hard reboot inorder for it to turn off.
    It just get the start white apple and then it restarts after a few minutes. 
    I also cannot access the ipad via itunes and therefore I cannot do a restore.  I could access it before the problem happened.
    This occured after I updated an app and did a reboot.   The update never completed itself (Flipboard)
    The itunes is the lastest version.

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • HT2693 My Pages App will not open after I recently updated it. I'm afraid to lose all my docs if I delete the App and re-install.

    My Pages App will not open after I recently updated it. I'm afraid to lose all my docs if I delete the App and re-install.

    First of all - you are running the proper iOS in order to use the latest version of Pages - correct? You need iOS 6 now.
    If so ....See if this helps. Maybe Pages will open after you try this.
    Quit the Pages app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or ..... Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that didn't help backup and send your files into iTunes with file sharing.
    You could lose all of your files if you delete and reinstall the app. That is precisely why you should backup your iPad and send your files into iTunes using files sharing on the iPad. Do you backup or use file sharing?
    Backup your iPad, send the files from the iPad into iTunes using file sharing and then delete the app and reinstall it.
    Start here ..... How to backup and restore from a backup
    http://support.apple.com/kb/HT1766
    iOS: About file sharing.
    http://support.apple.com/kb/HT4094

  • Firefox will not start, after reboot.

    For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
    == This happened ==
    A few times a week
    == Around the time 3.5 was released

    Hello Tom.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • SLD will not start after I upgraded Netweaver 2004s Portal

    SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
    It gives me the following J2EE error:
    Application error occurred during request processing.
      Details:   java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
    Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]

    Hi ,
    as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
    See the threads below for more information
    NetWeaver 2004s upgradation problems
    Could not run WebDynpro Tutorial - NoClassDefFoundError
    Points are welcome if it is useful
    Koti Reddy

Maybe you are looking for

  • Error in saving Web Templates

    I am currently seeing a problem in creating new Web Templates in Web Application Designer in SMD. The error occurs when a Web Template is newly created or when an existing Template is modified but clicking the OK button in the error dialog screen all

  • Spreadsheet Services won't save settings

    <p>I'm selecting some settings in the Spreadsheet Services throughTools->Preferences such as styles and color for parent members.But when I logout and login it doesn't save those settings. Is thisa known issue with the tool because I'm sure this does

  • Automate PO Complete from SRM to ECC

    Hi All, To Automate PO Complete from SRM to ECC i am using BADI BBP_ECS_PO_OUT_BADI. In ECC I have to update the following indicators. EKPO-LOEKZ = S (Deletion Indicator in Purchasing Document) EKPO-EREKZ = X (Final Invoice Indicator) EKPO-ELIKZ = X

  • EPrintCenter: "Photo files will always be printed in 4x6". Huh?

    ePrintCenter states "Photo files will always be printed in 4x6".  Is there a workaround?  It seems presumptuous and restrictive to assume everyone wants to print jpg/gif pics on 4x6/PhotoPaper.  I have a black&white scanned drawing that needs to be o

  • Dynamic action - default values

    Hi guys, Anybody knows if it is possible to set a dynamic action in order to default P0001-WERKS field in the Infotype 0001? Thank you very much!