IPad won't turn on after update to ios7
After updating to ios7 on my iPad, it would keep resetting itself and show the apple logo until finally starting up. Over a few days this got worse and worse and eventually stopped working where I would have to hold the home and on/off buttons to reset it. I have now reached a point where it no longer starts up. Having went to an apple store they say they can't identify the issue as they can't start it up and offered me to pay £199 to have it replaced (how very nice of them). I have had online chats with an advisor and a senior advisor who have diagnosed this as a 'hardware' issue!!!
Guess what apple, no it is not, this is a result of the updgrade to ios7!!! My iPad worked perfect before and I will not be paying £199 to replace it!!!
If anybody else has had similar problems please let me know.
Thanks.
Try this reset ...
Tap Settings > General > Reset > Reset All Settings
If that doesn't help, restore the iPad > Tunes: Restoring iOS software
Similar Messages
-
My Ipad air won't turn on after the new IOS7 update
my Ipad Air won't turn on after updating to the new IOS 7.1.1. It ask me for my password I put it in, the apple logo appear and then it want off now it won't come back on. need help please
Did you try this?
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
IPad won't turn on, cvcles update bar and apple logo
Hi guys
My iPad won't turn on after I tried to charge it last night. What happens is I'll try and turn it on and it will go on to the Apple Logo, then the little bar will appear as if it is updating. The bar will get to about 2% of the way across, then the bar will disappear. Sometimes it will get to the lock screen for a brief moment before going straight back to the Apple Logo. This will just repeat persistently. I have tried holding the home button and lock button together, and all this does is get rid of the update bar, but the logo screen cycles. Any ideas on why this is happening and how to fix it?Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
Mac 10.6 won't turn off after update
Macbook air a1304 won't turn off after updating unless you push on/off button.
Phone your nearest HP Support to request warranty service. Worldwide contact info can be accessed here>Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Ipad air wont turn on after update today?
ipad wont turn on after update today. cannot do a hard reset either...
tried holding the power and home at the same time, still won't turn on suggestions?How long did you hold the power and home buttons? You need to do that for about 30 seconds, sometimes even more before the apple logo appears.
-
Ipad won't turn on after 4.2.1 upgrade
After I upgraded my Ipad to the new os 4.2.1 it won't turn on. Before upgrading we all know that you turn it on by clicking the on and off switch or pushing the belly button in the middle, but now nothing happens at all. I have found that if I hold both for 10 seconds or so it does boots up but this can't be the norm for everybody is it? Does anybody have a fix for this? Any help would be appreciated.
I posted the same thing on another thread. Everything else was working fine and the for sure I had lots of power.
But, and I know it makes me sound like a *******......., it's back working again.
I "think" I did the following.
At the home screen, I started the photo frame and that's when it worked. Not sure what triggered it.
This is totally bizarre as I had restored the entire system and it still wasn't working. Maybe something internal is a little "loose" but I doubt there's much that ain't solid state or hard wired in there.
I am absolutely dumbfounded by this. Last one to touch it was me, my son was playing the MX Mayhem, he went swimming and left the iPad on the sofa. I retrieved it, screwed around with it and nothing. Came back to the iMac and was searching the forums. Pressed the home button activated the photoframe (somewhat accidentally) and wham, it just worked.
Strange things are afoot at the circle K.
BTW, last app I added was SBS Tour de France Tracker if that caused anything. -
On my computer (using windows) I tried to update my iPod touch 5th gen to iOS 8 using iTunes, using this website http://www.gottabemobile.com/2014/09/17/the-secret-to-skipping-long-ios-8-downlo ads-and-problems/ as a guide.
It kept coming up with this error http://support.apple.com/en-us/HT201442 after the update.
Now my iPod won't turn on and it shows the charger with the lightening with an arrow above it pointing to the iTunes logo.
So i plugged it into iTunes but i don't know what i'm supposed to do, any help?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Q10 Won't Turn On After Update
I am currently on Windows Phone and wanted to try Blackberry 10 as I am fan of my old Blackberry. I wanted to try it out cheap so I bought a Q10 on Ebay for $50 even though the seller said the phone had a water damaged sticker thinking I could fix it. I also bought a brand new battery from Amazon to go with it.
So my issue is when I got the phone, it was having trouble connecting to Link and reloading the OS would fail due to connection loss, so I nuked the phone with a program to clear the phone. I also soaked the phone in isopropyl alcohol after reading that soaking it could get rid of mineral deposits on water damaged phones. After the nuke and clean, the phone does the two quick blinking red lights which (I think) means the phone has no OS on it which is what I wanted after the nuke.
So, I plug the phone into the computer and Link recognizes it as a Q10. I have BB OS 10.2 downloaded and went to reload it. It completes the update all the way with a green LED on the whole time it is updating. When Link says to unplug the phone to let it reboot, the phone does nothing. Holding down power for any length of time can't turn on the phone. Plugging the phone into a wall charger causes the orange charging LED to flash on like it's going to start charging before quickly turning to a red LED while it stays plugged in.
I nuked the phone and tried Autoloader which does the same thing in the end as the phone won't turn on when it unplugs from the computer after updating. Seeing as how the phone is recognized by Link, seems to update correctly with the green LED on, and can be nuked fine, is there any way I can get this phone to work? It seems as though the battery isn't charging because once I unplug from the computer / wall, nothing seems to do anything and the LED doesn't flash. It is a new battery, so could the water have caused an issue on the circuit board which is not letting the battery charge?
Any help is appreciated, and I am willing to try pretty much anything and have decent knowledge of software / hardware. I have done tons of searching for similar issues to no success, but have not found this exact problem. Thanks in advance for any help!OK, you bought a new battery which I would recommend, and it still is NOT charging or powering on.
You've done this already >> Make sure you let it charge with the wall outlet charger for several hours and then with it still connected to the wall outlet charger, remove the battery and reinsert... what happens?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
How to restore my iphone 5 that won't turn on after updating to iOS 7.0.2
I have my iphone 5 and recently tried to update to the new iOS 7.0.2 but it appears to have frozen with a black screen as the background and an apple with a little progress bar. My lock screen is broken and so there is no way to hold the home button and lock screen at the same time to attempt to reset it. Is there any other way to restore my iphone. Please i'm so worried about it, it has been in this freeze for over 4 hours!!
screen won't turning on
-
IPad Won't turn on after it was dropped
My iPad fell off the sofa and hit the ground, now it won't turn on. When I plug it in to charge, nothing happens. HELP!!!!
Visit an Apple Retail Store
Find an Apple Authorized Service Provider -
Ipad won't turn on after trying to backup from ICloud
I need help getting my Ipad to turn on after trying to restore from an ICloud backup. My Ipad is up to date on software. I went back to factory setting and that worked. Then when I tried to restore from an ICloud backup, it started the process and somehow got frozen in the process. After a few hours, I pressed the button athe the top and the home button simultaneously and turned it off. When I turned it back on all that comes on is a black screen with an apple in the middle of the screen with a bar below it that is only about a quarter complete. Please help me.
It sounds like you need to restore your iPad and you will probably need recovery mode now.
Recovery mode - Support - Apple
You could try resetting the iPad one more time, but I don't think it is going to work.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
IPhone won't turn on after update
I tried to do an update on my iPhone4 and now the phone won't turn back on and iTunes isn't saying that it's in recovery mode.
I have already tried that, and it just comes back to the screeen that says I need to connect to iTunes, which I am.
-
IPad won't turn on after restoring from backup
I restored my iPad 2 running iOS 6 from a backup I made this past Sunday (on iTunes 10.7 for Windows). I left it alone and let it do it's thing. When I came back my iPad 2 was off. When I tried to turn it on, the Apple logo appeared for about 20 seconds and then it simply shut off.
I can't get my iPad 2 to turn on. Any ideas?Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
IPad won't turn on after I tried to update it.
Hey. So I tried to update my iPad to 7.0.6 I think but it said there was an error and now my iPad screen is stuck on the iTunes Logo and the cable. I've tried turning it off by holding down the lock button and the home button but when it turned back on, it was the same screen and iTunes won't recognise my iPad. Help please!
Your iPad is in Recovery Mode.
Follow the instructions here carefully:
http://support.apple.com/kb/ht1808
Maybe you are looking for
-
Itunes for windows 7 won't load?? Please Help
I've tried loading iTunes after restarts and re-installations but for some reason it won't load. I've never had this problem before and can't seem to solve it. Any help would be much appreciated Thanks Trickster
-
Wich one of these or any FM Transmitter's work with a NANO?
I am looking for a good FM Transmitter and i saw this Monster iCarPlay Wireless FM Transmitter for Apple iPod with Dock Connection at Best Buy and i was woundering if it will work with a NANO, this transmitter is Ipod Mini compatible. If not then the
-
In single Jtable colum can have Textfield as well as Combobox
Hi guys My requirement is I want comboboxes in some rows and textfield in some rows of SAME column. I searched lot on net but everywhere I found solution for setting editor as well as renderer for ENTIRE column. I hope you guys understand my problem.
-
I'm running iPhoto '08 on an eMac G4 using OS 10.5.8 and have lost my photo library. Any ideas as to how to find it and /or rebuild it? I know it is there on my disk.
-
11i (11.5.3) New Functionality and Enhancements information
Hello All, Can you send me a link or doc. that lists out all the 'new functionality' (enhancements) that are in 11i and not in previous version? We're doing an analysis to see, whether small customizations we're doing are really worth doing, if they'