IPad2 3G does not recgonize SIM card after ios5 upgrade.

Recenlty upgraded to ios5 on my iPad2 Wifi + 3G. Was working perfectly until the ios5 upgrade. After the upgrade, it no longer recognizes the sim card.
Tried all the following things, but no success -
1. Rebooted the ipad2
2. Replaced with new SIM
3. Did a system restore of the iPad
Contine to get the following message on start up :
No SIM card installed!
Also, top left hand corner shows No SIM instead of 3G.
When I go to the Settings page, Cellular Data section is disabled.
By the way, tried the same SIM card on another iPad which had not upgraded to ios5 and the SIM card worked fine.
Pls help. Really frustrated right now with this ios5 upgrade.
Chetanovsky

Finally found the solution. New iPad!. The apple authorised service Center replaced my iPad with a new one. Not many questions asked! New one is preloaded with iOS5 and recognizes my SIM card.
Recommend people to do the same (i.e. get a replacement) if you have the same problem as mine. Do remember to backup your stuff before sending in your iPad to the service Center.

Similar Messages

  • I bought an iPhone 5 but does not accept sim card.How to do?

    I bought an iPhone 5 but does not accept sim card.How to do?

    Exactly, what do you mean by "does not accept sim card"? Are you saying you purchased a carrier locked iPhone & you can't use a sim from a different carrier? If so, that's the way it works. Carrier locked iPhones can only be used/activated on the carrier's network the phone is locked to. Either return it for a refund or contact the carrier the phone is locked to to see if they offer official unlocking.

  • Ipad2 wakes up to a blank screen after iOS5 upgrade

    I have noticed two  peculiar issues after iOS5 upgrade. My ipad2 screen awakens to a blank black screen after password input; this only happens when an app or a program was open when it locks. I have to close and reopen the cover and reenter password to get to the usual screen. 
    Additionally I have noticed the icons for several of my iapps become invisible, the name of the icon is visible and the app/program opens up if I click on the name
    any suggestions?
    thx

    I had a similar thing on an old MacBook Pro where if I closed the lid, then reopened it before the sleep cycle took over, it would have a blank screen. I had to close the lid until the power light pulsed, then it would wake normally.
    Any similarities?

  • IPhone 3GS can not detect SIM Card after upgraded to iOS 6.0.1

    Guys I really need your advice please...
    I upgraded my iPhone 3GS 32GB from iOS 5.1.1 to 6.0.1 a couple weeks ago and since then it can not detect the my SIM Card ever. Before it's been upgraded, the phone was working just fine, but now it's just like a gameboy to me. I've been trying to find solution and some stores want me too pay quite amount of money to fix it but I refused.
    By the way, it has been jailbroken with RedSnow, tethered of course... and all the features are working perfectly, the WiFi is working, syncing is working, Bluetooth is working, downloading apps from App Store is okay, but only Mail and Safari won't work. I haven't got a chance to go to Apple Service Center to fix it yet, but the store I went said that Apple may say the same.
    Thanks in advance.
    ps to Admin: I'm a newbie, so if I posted this in the wrong room please forgive me.

    rzulfikar wrote:
    Thanks Chris for your solution.
    But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
    The problem is not about upgrading an iPhone to a newer version of iOS.  Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes.  You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
    Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it.  Your choice, your decision, your consequences.

  • HT201210 not reading sim card after upgard to ios5.1

    I bought an uncontract Iphone 4s in Los Angeles, and actived it in Beijing China by using my sim card of China mobile, and everything works perfect. One day when I connected with Itunes, it asked me to upgard to IOS5.1, I pressed OK, after the upgrade, the iphone could not reading the sim card, I tried restart the 4s and re-insert the sim card, but all failed, and Beijing Apple store said they can not help, I have to go back to US to solve this, quite annoyed.

    http://support.apple.com/kb/TS4148

  • Droid Pro does not recognize sim card

    All of a sudden today my Droid Pro, which I have had less than a year is not recognizing the sim card.  It is up to date on software.  I can still receive text messages as well as phone calls.  One other thing it has started to do at the same exact time, is that my text message will freeze and I will have to force close or turn off my phone and restart.  I can't get through a whole text.  Is anyone else having this problem? I've had way too many problems with the Droid Pro and Verizon never seems to take care of it, so hopefully someone here can help me out.  

    Hello,
    I would like to assist you.  Have you attempted to remove the sim and re-insert it?  Has the sim been replaced before?  Please let me know so I know what steps have been attempted.  To address the text messaging concern I have a few questions as well.  Have you cleared the keyboard cache and data under Settings>Applications>Manage Applications>All>Keyboard?  Have you ever complete a factory reset?  Please advise.  I would also like to provide a suggestion.  Navigate to the Google Play Store (formerly known as Android Market) and search for Gingerbread Keyboard and download it.  Once downloaded go to Settings>Language and Keyboard and enable the Gingerbread Keyboard and exit the settings.  Enter the text message application and long press on an empty text field and choose the Gingerbread input method and test.  Please respond with your results and the answers to the questions above.  Thank you. 
    TominqueBo
    VZW Support
    Follow us on Twitter at @VZWSupport

  • External USB keyboard does not work with T60 after BIOS upgrade

    External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
    It does the same with or without the docking station.
    Anyone else bumped into this problem yet? 
    Has someone found any fixes for this?
    t

    Hi and welcome the forum!
    Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
    v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • SMS Alerts Not Ringing on 3GS After iOS5 Upgrade?

    Hi folks,
    Odd issue with SMS ringtones after upgrading to iOS5. Despite the phone not being in silent mode and a text message tone being set up, my phone does not play the new text tone when I receive a new iMessage (seems to work for standard SMS messages though). This is for when the phone is locked, by the way; I know that there are no sound alerts configurable for the main notification area.
    This is annoying as it seems to only pop up an alert on the lock screen without actually giving me any audio notification. So if my phone's in my pocket or even if I'm just not looking at it, I don't know that I've gotten a new message.
    Any idea what I might have configured wrong?

    Can you explain what you mean by a full restore? Do you mean wiping the phone and restoring from iTunes?

  • Ibooks not working on iphone4 after ios5 upgrade

    Hi folks,
    the ibook application is not working anymore after upgrading to ios5.
    It all appears to be ok but no book can be open. The books appears correctly, others may be downloaded but still none of them can be open.
    It looks like lacking a kind of  authentication.
    I removed it , restarted the phone, installed it again and it still does not work.
    Am I alone with this problem or someone else also got it?
    Marco Aurélio

    Hi.. I have problem wth hotspot too. But i still use it via wifi. I cant use cable as medium anymore. My experience, hotspot connection vis wifi sometime need to resert the connection several time before stable. Just try this: unplug the phone from usb connection. let your wifi turn off. Then set the personel hotspot on via usb only. After that back to the wifi setting. Turn it on. Again back to the personel hotspot setting. Turn it off, on it back (wifi connection automaticly selected when usb cable unplug). Now you can search your phone from ur wifi service on pc. Hope it works..

  • Can not send e-mails after iOS5 upgrade

    I upgraded my wifes iPhone to iOS 5. After the upgrade she can receive e-mails but can not send them. All the composed e-mails end up in her outbox. I click on the error and it says "The connection to the outgoing server "smtp.***.com" failed. Additional Outgoing Mail Servers can be configured in Setting>Mail, Contacts, Calenders."
    Anyone have any suggestions?

    Go to Settings => Mail,Contacts,Calenders => select the account and may have to click account again => should be viewing username and password, Scroll down and Select - Outgoing Server => Tap on Primary Server => try entering Username and Password in there even though it says optional... Also try port 25 if that doesn't work and try toggling SSL on/off if that doesn't work.

  • HP Slate 7 does not see SD card after update

    My tablet also just installed Android update and it will no longer recognize the SD card. I tried another SD card and it also is not recognized.Tablet model is Slate 7 4601It shows Android version now as 4.1.1Build number HP_slate v1.05.17_userI have my music and some movies on the sd card and it always worked flawlessly before the update.i also Tried to reboot,but nothings happen pls help.Any siggestions? Is HP listening? It sounds like others have suffered the same issue, pls make an action...many of us suffered same issue....

    Hi!, djaulbryan: Your problem is the same what many users, in tablets with OS Android 4.1.1, when actualized compilation number v1.05.17_user.  You can download and install the apk File Manager HD, for use Cloud, FTP (File TRansfer Protocol), LAN, etc ... HP know this problem and IMHO, this problem, will be solved, soon.

  • 3 finger swipe does not work in finder after mavericks upgrade

    I used to navigate in finder by swiping with 3 fingers left or right. This still works in Safari. It even works when navigation through system preferences but not in finder. I looked at the options in the track pad preferences and all the gesture options are the same as before. I loved the 3 finger gesture because it made navigation through folders a breeze.

    Go to System Prefernces and Trackpad or Mouse, depending on which you are using, and see that the gestures you want to use are all checked.

  • Purchased Music on iTouch does not appear in iTunes after IOS4 upgrade.

    Subject line says it all. My son purchased a bunch of songs on his iTouch and did not sync these with iTunes. I upgraded the OS today on the Touch, and now he can't find any of the songs he bought on his touch. iTunes says I have no downloads available.
    How do I get these purchased songs to download to my iTunes library?

    I'm guessing that when you connected the shuffle to the second computer, a dialog box came up and asked (in essence) if you wanted iTunes to erase all the music that was currently on the shuffle, and that you said "no!".
    However, the shuffle can only be in sync with one computer at a time.
    srb

  • Audigy FX Control Panel does not recognize my card

    I have Windows 7 Pro, 16gb Ram, Intel i5-2400 processor. I just installed my new Blaster card and software two days ago.
    When I click the Taskbar icon for the Audigy FX Control Panel, I get the message "The current selected audio device is disabled, not present, not supported by the application, or has unplugged jack connections".
    When the Control Panel does open and I click on Menu and select Audio Device Selection, I get the message "There is no supported audio device available".
    When I go to Control Panel>System>Device Manager>Sound, video and game controllers>Sound Blaster Auditgy FX>Properties it shows "This device is working properly."
    Today, Windows Update included the following:
    Creative - Audio Device - Sound Blaster Audio Controller
    Installation date: ‎12/‎18/‎2014 1:17 PM
    Installation status: Successful
    Update type: Optional
    Creative Audio Device software update released in November, 2014
    More information:
    http://sysdev.microsoft.com/support/default.aspx
    Help and Support:
    http://support.microsoft.com/select/?target=hub
    SB Audigy FX Control Panel still does not recognize my card after this update. Help please.
    Screen shots.
    soundblaster_error.jpgsoundblaster_audigy_properties.jpgsoundblaster_properties.jpg

    Originally Posted by SHS
    My question no you mean you I don't understand my answer
    HTML Code:
    <This sentence makes no sense>
    It simple you shouldn't have install those windows update driver
    HTML Code:
    <How would I know that?>
    The simple fix is to uninstall the Sound Blaster software from the Control Panel and then re-install it that should fix the problem.
    HTML Code:
    <Done. Did not fix the problem>
    OK, so you don't understand my original post. I installed the card and software two days ago, 12/16/14. The problem was present at that time. Then today at 1:47pm, I installed the Windows update. The problem persists, that means I still have the problem. The problem exists BEFORE and AFTER Windows update. I did follow your suggestion and uninstall and re-install the Audigy FX software and STILL have the problem.

  • HT2417 my ihone 4s does not have good reception after i downloaded the new ios 6

    my iphone does not have good reception after i upgrade the new ios6 version

    no, and i have spent my entire spring break with a dead iphone 4s, no access to my iphone mail accounts, can't get into my text service app, and can't get into notes. oh yeah, all of my music is gone. thanks a bunch for this wonderful upgrade.
    i am never upgrading again until i am sure all the bugs are out. this is a waste of my time and what's the use of having a cellphone if it only stays charged for two hours?
    one of the apple forums said that iox is "expanvie" and gave us tips on how to lengthen battery life. i was already doing all that stuff. so it seemed to me that apple was just taking the stand that  ios is just more "expansive." this is lipservice hogwash. if that is the case, then we need to get new phones with batteries strong enough to accommodate running these power apps and updates.
    my iphone makes a **** good coaster though. right now i am just ready to start sending smoke signals!

Maybe you are looking for

  • Video Converter Cable - VGA to Composite Video (RCA and S-Video)

    Hi, I have HP G60-125CA laptop (Windows Vista) and I am trying to transfer laptop image from laptop to TV (regular sony TV not HDTV) using Video Converter Cable - VGA to Composite Video (RCA and S-Video). But for some reason it's not happing. Please

  • Iphone 4 will not sync or appear in itunes

    I plug my iphone in to my macbook and it wont sync.  I have already done the troubleshooting on apples support website. 

  • Function that return Company Code given an Org Unit ID

    Hi folks, As per subject, is there any such function? I seem unable to find. Straightforward way is just select bukrs from hrp1008 using the Org Unit OBJID. However, that table only stores direct assignment. I.e. many Org Unit actually have the compa

  • Best way to export

    Hello everyone. I need some help exporting a video in final cut pro. I have a 1 hour long hd video that I need to export down to at most 8gb. I also need it to export some what fast. I have a 2011 MacBook. I use final cut all the time, but I just don

  • Adobe XI 11.0.06

    I can not remove it and then reinstall it