Ipad2, i have repeatedly done recovery steps...am stuck at picture of cable and arrow with itunes logo...what am i missing?
ipad 2, disabled connect to itunes
i have never synced with pc
i am currently trying to do a recovery or whatever needs to be done, and i beleive i am missing a step somewhere
like connect to itunes or something
i tried to do recovery and am at the point where it shows the power cable along with an arrow towards itunes and logo.
but, it just sits there. i researched and saw where i was to go into itunes and select my device....somebody help, please...
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.
Similar Messages
-
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
I have connected my ipad to my computer and logged into iTunes website. On my iPad to restore my my data Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to restore from the website. Can you help me please? the 2 replies, I thank you, but this has not helped with my problem.
Your post is somewhat confusing. To restore your iPad you use the iTunes application on your computer and connect your iPad. Select your iPad in the left column of iTunes on your computer and select General in the right column. You should find the restore choice there.
-
I have a 2007 macbook that is stuck on the loading page and after a while it shuts down by itself. I don't know what to do anymore please help!!!
Hello Sebas4224
Start with the article below to troubleshoot issues with your MacBook starting up and staying on. Let me know how it goes in case it does not help and I or others can assist you further.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Regards,
-Norm G. -
After updating my Iphone 4s to os 7.1.1 from 7.1 over the air, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset. Make sure your network settings are correct and your network is active, or try again later. My phone has the itunes logo and charger symbol on it, as well as an arrow pointing at the Itunes logo. After holding the sleep button down or even doing the hard reset the same screen comes up on my phone regardless of whether it is plugged in or not to my computer. I have turned my computer off and on again. It is plugged in and charging as it's battery life is very short. I also reset my modem and the same error message pops up. The only option on my computer when my phone is plugged in is to restore it. My firewall also allows Itunes through it. I have literally tried everything I know being someone who knows very little about technology. I also do not want to hear about how the update worked for other people. My phone has been in recovery mode for 5 hours at least now so it will just make me more frustrated if a bunch of people post about how the update worked for them.
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
I tried to download tI tried to download iOS 7.0.4 and have been stuck on a screen with iTunes logo and up arrow and a picture of charger plug. It has been this way for 2 hours. Help??
doreen329 wrote:
... have been stuck on a screen with iTunes logo and up arrow and a picture of charger plug. .
Your Device is in Recovery Mode and needs to be connected to the Computer you Usually Sync with.
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
iphone 4s will not turn on, you can not restore with itunes. What to do? Phone lit white screen and nothing can be done?
Reboot computer. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Click the Restore button of iTunes. If still problem, all iPhone 4S have full Warranty. Make Genius reservation and take to Apple for resolution.
-
All of these steps were followed corectly. But a warning popped up and said that it could not be restored because it is locked with a pascode, and it said we must enter a pascode before we can use it with itunes. What should I do?
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
MY I PHON 16GB TRYED TO TO RESET BUT I AM GETTING ERROR 1015, WITH RECOVERY MODE with itune sign, what should i do??
Not much you can do. Your phone is most likely permanently "bricked" Error 1015 occurs when trying to restore a previously jailbroken phone. This usually leaves the phone in a state where it can not be recovered as you are experiencing.
Discussion of jailbroken phones is prohibited by the Terms of Use of this forum. You'll have to get help elsewhere. Ask the lovely people who helped you jailbreak your phone. -
iPhone 4 frozen with screen image of usb connector with arrow to iTunes logo. iTunes doesn't recognize my iPhone message says in recovery mode must restore. Try to restore and get - 1 error. What do I do now??
Hi there beee19,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
-Griff W. -
my iphone 3gs is charging on the wall charger but wont charge on the pc, have cleaned it, yet it can sync and update with itunes easily, but it still wont charge, have tried several cables as well same effect.
1) authorize iTunes on your wife's user account for her iTunes store account(s)
2) connect the device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred her purchases in the previous step, your content will be in her library and you can re-populate the iPhone with it. -
I just installed iTunes on my computer, where I already have all my music. I went to Edit > Preferences > Advanced, and changed the iTunes Media Folder Location to where I have all my music, in the "Local Disk." But iTunes wont import all my music. Help?
Have you looked in the Music App on your iPhone? On the iPhone music is played by the Music App not iTunes.
-
This is beyond frustrating. I just wasted 70 dollars between a new battery and gas for my ipod 80gb classic. It was having major issues syncing and freezing with itunes. I tried everything possible and noticed that a lot of people have been having the same issues with their ipod classics as well. I must have restored it several times and now it just totally bit the dust. Now I have to shell out 130 dollars to send it in to apple to be rebuilt/fixed. This is nonsense and I just cant believe apple isn't doing anything to address this issue. My ipod was doing great for about nearly 5 years and now this. I even down-graded to itunes 10.7, but by the time I had it set up to try, that's when my ipod totally failed and will not even come on. Grrrrrrrrrrrrrrr
Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
I have several old email addresses and accounts with itunes where the email is no longer working, and i have forgotten my password, how do i activate the songs
Welcome to the Apple Community.
The following article(s) may help you.
Look up your old and forgotten Apple ID -
I'm signed up to the Cloud and itunes match - the whole game. But I cam getting annoyed with having to delete songs one by one on my iPhone once dowloaded from the cloud as I only have a 16GB phone....yes I listen to music non-stop! So, I am thinking about getting an iPAD as I rarely use my MacBook Pro for anything other than surfing and music now... so the question is: "On an iPad with iTunes, do you know if you can edit/delete all your tunes on your device with a "clear all" button rather than having to delete a song one by one like you have to do on an iPhone (if not synching via a MacBook/ PC with iTunes account where I know you can clear down and refill with ease)????
Have you tried
Settings > General > Usage > Music > Edit > Delete
Maybe you are looking for
-
Dropped iPhone - Now my screen is blurry
I dropped it from about pocket height and now everything on my screen is really blurry, everything works, but it is pretty hard to text because the letters are blurred together. Is this warrantyable? Could they fix it at an apple store? You can't tel
-
How do I get rid of empty space left at the end of my project?
My first posting here - I'm glad to find this community! I've been working on a project . . . editing it down from its original length, but the empty space still exists at the end of my timeline. I want to remove it, since I'm posting the project onl
-
DB 10gR1 in a zone on solaris10/x86
Hi, i'm trying to install Oracle10g R1 on solaris 10 ( 6/06 ) x86 ( 32 bit ) -- thus i can't load R2 on it. ( only x86-64 supported ). Moreover i'm trying to install in a dedicated zone with inherited /usr,/var, /opt etc. there aren't any resource po
-
How to use the current connection when calling db procedure ?
dear all, Am using Jdevleoper 11.1.1.3 , I have a java class that call a database procedure , now everything is going fine with me but a bit slow bcoz am openning a new connection I think it would be definitely faster if am using the current connecti
-
Hi all, Hi All, I need to maintain 0vendor one time vendor master data from EKKO , ADRC . It doesnt allow duplicate records. For example: In PSA: Packet1 31 records.(20 + 11) Packet2 11 records. THis Pack2 records are already maintained in packe