Ipad2 name change
how do i change the name of my ipad2 . research says right click on the ipad name in itunes but the option is not there
Click the iPad under Devices left side of the iTunes window in the source list.
Then type in the name.
Similar Messages
-
Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?
Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/ -
Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.
-
All,
Has anyone faced a scenario where you need to change the logical name for any SAP system?
For instance:
System Logical Name System Logical name B
BW A system is pointing to ECC B
ECC will be upgraded and system name will changed to C
Is that possible? If so do you forsee any issues? Can we switch ECC B to ECC C with no issues?
I appreciate any help.
RegardsHello Mike,
please elaborate a little more your inquiry. Are you talking about the ALE logical name changing? For this, please check the following notes:
#544509 ALE: Converting the name of the "logical system"
#121163 UTI: Logical System names
If you're referring to a domain name changing (like a Windows domain name change) or a hostname change, please refer to the following notes:
#96317: Host names during R/3 upgrade, tips & tricks
#1275273: Hostname change on 7.10/7.11 java stacks
#757692: Changing the hostname for J2EE Engine 6.40/7.0 installation
#8307: Changing host name on R/3 host: What do you do?
#1070561: SMD: Best practice for planned domain name changes
and on the following SDN threads:
/message/9196590#9196590 [original link is broken]
Re: Domain name change
Re: Change the Domain Controller
How to change hostname
Change Domain Controller
Or, lastly, you're talking about a SID change? On this case, you must perform a system copy to change de SID, please refer to the following note:
#11692: Renaming the system ID
(Sorry for the long and generic answer)
I hope this information helps.
Best regards,
Tomas Black -
Batch rename, name changes after frame 99
Hi, I put a folder into bridge to do a batch rename and called the text MILAN/SYRIA and gave for first number 00.
After frame 99 the name changed to a weird Adobe Bridge Batch Rename Temp 10037
Which you can see better in the RAW windows, the 99 and the following one.
Photoshop doesn't like to open a name like that, can't blame her.
of course I strongly suppose that I should have given 3 digits in Batch rename, and l am looking for your confirmation, and while I am here
why was my card full at 0485 pictures when a folder I think takes as many as 9999, how do you finish a folder if your card is full?
i suppose you change card and you keep going with the same folder? Sorry about the camera question, couldn't keep it, thanks donano,no, i started with 00 two digits only, batch rename changed to 623 after i put the folder back in just in order to take the screenshot, i dont know why but that always happens if i put the folder back in after usage, but i do know for life now that if I am going to take over 100 shots, which is most of the time, i should start with 001 or 000.
See, this is the first number that was given to the first file, 01,WHICH actually became 00, i don't have it here.
So it rest to know where is "Preserve file name " in current metadata, and would that make it possible to revert to the original CR2 number?
Why not to change name straight from the new name? thanks -
Outlook does not connect to Exchange 2013 after name change due to marriage
When launching Outlook and clicking through the setup wizard to create a new profile, Outlook auto-discovers the correct email alias. When establishing a connection it successfully checks network connectivity and successfully searches the email settings.
When it attempts to logon to the mail server the error comes up.
"The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
Clicking "Check Name" gives the error:
"The name cannot be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
The same result occurs with a manual setup.
We are running Exchange Server 2013. User workstations are running Outlook 2013 on Windows 7 Pro. All updates have been applied as of March 31, 2015.
All name changes have been made in AD and Exchange. Old aliases and new aliases are set in Exchange. Offline Address books are updated daily. The local profile and registry settings have been updated on the workstation and the user is successfully logging
into the profile. The issue is only with Outlook 2013. User can access mail through OWA and ActiveSync on their mobile device.
Logging the user into another workstation and running the wizard returns the same results, which rules out the possible problem being with the workstation.Hi,
According to your description, I understand that failed auto-configure Outlook with error “The name cannot be resolved. The connection to Microsoft Exchange is unavailable…”, however OWA works fine.
If I misunderstand your concern, please do not hesitate to let me know.
Are all account or any special user experience this question?
If OWA works fine, it indicate that the mailbox database is mounted, and mailbox works well.
I notice that you have changed the account name before issue arise, because external access, the client locates the Autodiscover service on the Internet by using the primary SMTP domain address from the user's email address.
More details about Autodiscover service, for your reference:
https://technet.microsoft.com/en-us/library/bb124251.aspx?f=255&MSPPError=-2147217396
Please try below command to force update address list, GAL, OAB, then test again:
Get-AddressList | update-AddressList
Get-GlobalAddressList | update-GlobalAdressList
Get-OfflineAddressBook | Update-OfflineAddressBook
If the issue persists, please wait for some time to complete configuration.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
InDesign CS4: File names change to string of numbers
Occasionally, one of our users will save an InDesign CS4 file, only to have the file name change. For example, a file originally named "#kwn25501.bcbsNM.indd" was saved as "#kwn25501.bc157-1223857848."
If the user is not aware that this has happened, things can go horribly, terribly wrong in our production environment. The "numbered" file may be missing key elements, or be somehow be corrupt in some fashion. In one case, this led us to having to reprint a job because the "numbered" file was missing a photo; somehow, that file was used (and perhaps renamed after the fact) to create the final output.
We use Macs running InDesign CS4 6.0.5. Some of our Macs are running Tiger 10.4.11, while others are running Leopard 10.5.8. The problem seems to related to the Leopard machines, although that is not 100 percent certain at this point. All of these Macs are bound to Active Directory and save files to a Windows 2003 server. I know Adobe recommends against working on files over a network, but perhaps there is an explanation for this file renaming aside from network issues.
Any light that can be shed on this issue will be greatly appreciated. Thanks!
Kevin StaufferCheck to see if maybe your original filename is the problem.
You may need that particular name for a workflow reason, but some of the symbols in the middle of your filename are generally not a good idea. Especially working off of a server, file names should be ONLY alpha-numeric characters, no symbols, no periods (except for the file type) and only underscores or dashes to separate words, no spaces.
The reason is some of those symbols get picked up as machine language and all sorts of bad can happen as a result.
Message was edited by: Michael Riordan -
Problems with email account on ipad2 when changing from mobileme to icloud
Problems with email account on ipad2 when changing from mobileme to icloud
Would you please give us some more information about your problems.
-
E-mail Attachment Name Changes
I have a following problem with mail attachments: When I drag the attachment from my mail window onto my desktop, the attachment name changes to "unknown". So for example, "cat.jpg" would become "unknown.jpg". To make this a bit more complicated, the problem is a bit random and from this it follows that sometimes the file keeps the original and correct file name and sometimes it changes it. Also, this problem occurs only when I drag the attachment (which normally is image) from email window, but if I pull the attachment from above the message window, where it has a little arrow and it shows all the attachment icons, this problem does not happen. I am running Tiger and Mail 2.1. It would we really great if you could take a sec to answer this if you have any idea at all what this problem might to be. Thanks!
Best, RaunoHi Rauno, and a warm welcome to the forums!
Hmmm, since it's random, might try this...
Quit Mail, then In your home folder, try moving this +folder & file+ to the Desktop then reboot...
First, Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these files to the Desktop.
/Users/YourUserName/Library/Caches/Mail
Move to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
You can always move them back if it doesn't help. -
Display name of shared calendar in Outlook clients after name change on the Exchange Server
I have changed the name of a conference room resource calendar on the Exchange server but the name change is not being reflected in the end user's Outlook clients. I tested a remove/re-add and that worked but I cannot have everyone in the company do this.
Is there anyway to force the change down to the Outlook clients?I don't know for sure, but if this is the case, then it's highly likely that the GUID is used by the client after its first view of the calendar. From that point on, it appears it doesn't "revisit" the directory for updated names.
We'd need Outlook team feedback for confirmation. -
Why does the PDFs' name change when i view them in the iBooks app?
i have some past papers and marking schemes in my iTunes library....when i sync them to my iPad, they appear just fine....they are there just the way i named them and all...
but when i open them, the name changes to some coded-ish name with lots of numbers and all that....
is it possible for me to change some setting and save the name i want for those PDFs? Or am I going to have to live with this madness?
please help!Hello, I wanted to follow up on this issue after reviewing some of the changes with the current update. [https://bugzilla.mozilla.org/show_bug.cgi?id=1049521] This bug addressed some Windows HKEYs that are changed when Firefox is updated/or installed.
As an update, a patch has been made and changes are on the way for fresh installs of Firefox :-) -
MSA Conntrans fails after machine name change
Hi
I have 5 remote laptops that have had their name changed and conntrans will no longer work.
When I ran SELECT @@SERVERNAME on database it retunred old name so I then ran
sp_dropserver 'oldname'
sp_addserver 'newname' , local
Stop / start SQL server
SELECT @@SERVERNAME now returns new name . However Conntrans still failing. Is the machine name embedded anywhere else ?
The mobile application does open it appears to be just the conntrans process that will not function.
Has anyone done this before ? Is it possible ?
Best Regards MHi Melita,
Please check note 1253027. This should solve your problem.
regards
Vivek -
When downloading files the file name changes name?
When I download files from yahoo email account the file name changes from actual name to securedownlad.doc. Why is this happening and how do I stop it? Is it an email client issue?
Example:
Original file name in email to download is called GeorgiaTechstinks.doc
when downloaded the dl box pops up and file name has changed to securedownload.doc.
I have to go and manually change file name back to GeorgiaTechstinks.doc
any help would be greatly appreciatedSee here for information.
(24629) -
File Name Changes, Sorting Problem
Hi,
iTunes 10.5.1
MacBook Pro Snow Leopard
I am attempting to add a series of lectures to iTunes. These number about 100 and are sequential over 3 volumes. I obtained them in simple forlders labeled vol1, vol2 and vol3 and each track is named with a prefix such as "V1 Ch03 Relation of Physics to other Sciences.mp3". Oddly about half actually retain the full name and sort out properly but the rest do not. For instance the example in question becomes " Relation of Physics to other Sciences.mp3" and not sorting tricks can get them in order.
Before I starting fooling with the names is there somethign else I can do? I have turned off "automatically check for track names" option on iTunes but the same result. Are the spaces causing problems? I don't want to change the names as I would like to share these and others won't figure out the sequence.
There doesn't seem to be an option for date created sorting which may solve the issue. Also iTunes seems to be reading some meta data as the "album name" changes. It seems the lectures were originally released in a different series and recently compiled in the order created, the latter being preferrable.
Any help appreciated!
Happy Holidays!
WarrenOops, Just realised I put this n the wrong forum. Just to clarify this is prerecorded video files.
-
Photoshop Elements 3.0 Back-Up - File Name Change
I currently run Photoshop Elements 3.0. When I back-up the catalog from within Photoshop, the file names are changed (i.e 100_2424.JPG to BO00012). All of my Premiere Elements 7 projects point to the original file name. If I ever lost that original JPG file, the back-up file would be recovered, but would not be recognized by Premeiere Elements, and thus not be found. Why does the file name change after back-up? How can I retain the original file name during back-up? Thanks.
Once you have taken the backup, all the files are renamed as you mentioned in the post. Its only when you restore the catalog through File->Restore, the files are restored by the original name.
Maybe you are looking for
-
FCP XML to Premiere Different Frame Rate
Hello, I have imported an FCP 7 XML into Premiere 5.04. When my sequence was in FCP it was at a frame rate of 23.976 at 720P. When it came into Premiere, though, it had changed to 59.94 fps at 720P. I wonder how this has happened and if there is any
-
Can we provide new f4 help for a field in a list using grid display
Hi Gurus, Can I provide F4 help for field in edit mode for (which is not using any std. data type, uses only custom char field ) in the list displayed using CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'. I know this can be done using OOPS concepts but, I ne
-
I am trying to download the new Itunes but get a message saying I need 10.6 version and I only have 10.5. How do I download 10.6?
-
How do I get back to email summary screen from a message
I can't get out of the edit mode in my messages. I can not get back to a message summary screen no matter what I do. The options across the bottom of the screen are reply, trash, folder, flag and reply. Only since iOS 6 upgrade
-
Video Options won't let me select any options!
I have been trying to sync my video to my ipod. When I get to selecting preferences, iPod, and then videos... everything is light gray. I can't select anything. It won't let me update my videos automatically or select anything else either. What do I