IPhine 3G S will no longer charge with my Alpine CDA 9887 car stereo cable.

It plays fine, just will not charge anymore. A warning comes up on the iphone screen stating "This accessory will not charge with this device." or something like that.
I never had a problem on my iPhone 1st gen.
Any ideas?
Thanks!

I had the same problem when I bought my Iphone 3G. The 3g has a different charging system than the first gen.. Here is a quick work around.
http://www.scosche.com/products/sfID1/210/sfID2/318/productID/1667

Similar Messages

  • Playlists no  longer work with my Alpine CDA-9887 Car stereo

    I updated to 2.2 and all of a sudden when i search for playlists on my stereo, the search button on the head unit doesn't do anything. It is not the head unit because i tried it with other other ipods just to make sure and it worked perfectly. I never had this problem until updating to 2.2. Anyone else experiencing this?

    I had the same problem when I bought my Iphone 3G. The 3g has a different charging system than the first gen.. Here is a quick work around.
    http://www.scosche.com/products/sfID1/210/sfID2/318/productID/1667

  • Alpine CDA-9884 car stereo won't charge iPhone 4. Worked fine with 1st gen

    Why can I not charge my iPhone 4 from my car stereo as I have done for the past couple of years with my 1st gen iPhone?
    Does the new battery charge differently?

    It's the iOS4.0 that is messing it up, I have a 3GS and work at a Car Audio Shop and 100% of every model of every manufacturer does not work with the OS4. Some of these radio were just release less then a month ago built specificaly for iPhones, and after the update to OS4 they no longer function. Same Phone, same radio, different OS different results. Sonys will just sit there frozen with Ipod displayed on the screen. Pioneer Radios will display searching then after a few mins give Error-19. Kenwoods flash Searching.... forever. Alpines display Device Error, the alpine thats made for iphone and pandora never recognize the phone or ipod even if you have the pandora alpine link app running. JVC displays Searching forever. So your going to have to wait 6 months or more before you can get a new radio that can work with the OS4 and iPhone 4. If you have an older iPhone and want to keep your radios working with them, just dont allow the upgrade. Hopefully apple can patch whatever is blocking the comunication ports these radios use, or put the old code they removed back in so they become backwards compatible, but I wouldn't bet on it, if they break your stuff and do nuthing about it you have to buy more stuff, which makes them more money. Just a Heads Up. Was hoping to come here and see some hadn't had the same problems but looks like theres alot of issues with OS4 tbh.

  • My new Ipod touch won't  work  with my Alpine CDE-125BT car stereo.

    I bought the new Ipod touch. I am dissapointed because I can't get it to work with my fairly new Apline car stereo. This radio has an ipod cable which worked with my ipod classic. I called alpine they told me to buy the Apple 30 pin to lightnig adapter, I did and it still didn't work. The radio also has bluetooth. I was able to connect  ipod through bluetooth, but music wouldn't play through the radio. Is anybody having the same issue as me and is there any advice. Thanks.

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    It could be that the car system is not compatible with the iOS on the iPod. Sometimes an iOS update breaks compatibility. I would pursue that with the car system manufacturer. Ask it they tested the car system with a 5G iPod with the adopter.

  • How can I get my iPhone 4 w/ iOS6 to Connect bluetooth with my Alpine CDE-133BT Car Stereo?

    My iPhone 4 with iOS6 will not send a bluetooth signal to the Alpine CDE-133BT Stereo I installed on my 2006 Toyota Tacoma. It had previously connected with iOS5. I contacted Crutchfield where I opurchased the stereo from and they said this is a common complaint with multiple brands of stereos not being compatible with the new iOS6 update. Has anyone had this issue and has a solution? Or is this something that Apple will have to fix?
    BTW, my phone recognizes my stereo as a bluetooth device but the stereo does not recognize the phone.
    Thanks.

    Hi I've had my CDE-133BT since July and recently updated to IOS6 on my iPhone 4 (not an S).
    I had to hold the BT phone button and forget all the devices paired to the 133BT.
    Then pair the phone again.
    I can stream music now however I can't control (change tracks, pause or play from the 133BT).
    This is because Alpine needs to update the firmware I believe.
    Hope that helped!

  • Apple bluetooth headset will no long charge with 2.0.1!

    So today I decided to update my iPhone (3G), I noticed that my Apple bluetooth headset was low on charge so I plugged in my headset to be told that "This accessory is not compatible with this iphone"!
    Not only did apple screw me on the shape of the new iPhone stopping me using the dock for my bluetooth headset but they have now stopped me from charging my headset with my phone! I am now officially going back to my old iPhone.

    Hello Kai.dean,
    Out of curiosity... I just tried mine, and its working just fine.
    Wonder what's up with yours not working?
    I'm using the "travel" cable that came with the Appple Bluetooth (since the 3G does not fit into the base any longer) and no problems at all? Charging... and still shows up on the 3G screen.
    I was able to make calls using my Apple Bluetooth, 3G, and the new 2.0.1 software.
    Doug

  • HT1476 my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?

    my iPhone 4 will no longer charge. It is also not recognised in iTunes. There seems to be a problem with the connector slot. I've tried other cables and other computers/plugs but the connection is not being made. Any suggestions?
    It seems to me that the connection port is faulty.
    George

    Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • Ipod will no longer charge on docking station or car dock

    My ipod will no longer charge while it is playing on my docking station or on the car dock. The only way I can charge now is with the genuine charger which means I can only listen for a couple of hours and then have to charge up again. Any ideas?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My 4thgen iTouch will no longer charge...

    My iTouch will no longer charge, at first I thought it was my charging dock on the alarm clock but it will not charge and is not recognized on the computer either. My pc says "the hardware plugged in has malfunctioned and is not recognized". Can I do anything or is this dead? I have only had it since November.
    Any help would be GREATLY appreciated!
    Thanks
    Kristie

    You can try a couple of things before you throw in the towel and take/send your touch in for service.
    First off, restart it - hold the Sleep/Wake button down until you see the red slider. Turn it off. To restart, hold down the Sleep/Wake button.
    Reset - hold the Sleep/Wake and Home buttons down at the same time. After about 10 seconds you will see the Apple logo - let go of the buttons.
    Also, make sure you are using the original USB cable when you plug your touch in to recharge.
    If the Restart/Reset doesn't work and you are close to an Apple store, make an appointment with a Genius and take it in. If you need to send it in, see the instructions on this site on how to obtain warranty service.

  • Iphone 5 will no longer charge after 7.1.2 update

    I updated my Iphone 5 to the latest software 7.1.2 a couple days ago and now it will no longer charge. I purchased a new cable thinking that was the case but it is still not taking a charge from my car, wall outlet, or computer.
    Apple Support told me it is the port, a $279 fix without warrenty or Apple Care. I have done nothing to the phone to cause this to stop working.  Now my phone is dead with no forseen reason other than the update causing something to go wrong.
    There must be some sort of issue as this is not the first post I've seen ragarding this.  I would appreciate not having to fork over a massive sum of money due to what I thought was a routine software update.
    Thanks

    I find it extremely hard to believe that a software update has caused your port to bad. This sounds more like port just gave up at the same time as the update.
    Allan

  • My daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck. help!

    my daughters ipod 4th gen will no longer charge past 20% and will not connect to a pc in order to back everything up. the cable is working fine, otherwise it would not even charge to the 20%. i have tried the reset to not lose any data and no luck, home+power for 10-15 seconds. I really would like to not lose everything she has, again, because I can't back it up this time. I have tried charging via a wall outlet and PC and both charge fine, just only to 20%. I am using the cable that came with it so no aftermarket issues there. Please help so I don't have to reset everything again.

    Because once it has charged enough to be powered on as soon as you turn it on it says battery is at 20% and will not charge anymore after that, it just runs for about 5-10 minutes before the battery dies again. The battery cycles discharge/recharge daily and its not on the charger at full charge for more than a couple hours and is never totally dead for more than a couple of hours.

  • HT201412 my phone will no longer charge, when i plug in the charger the phone says - charging is not supported by this accessory.

    My i phone3GS will no longer charge - when i plug in the charger the phone says "charging is not supprted with this accessory"

    do you have any other chargers? is it the charger that came with the phone? is it giving the same issue when plugged into the computer and into the wall? do you have an apple store near you to try the chargers there? can you buy a new charger at target or something? have you rebooted the phone?

  • My iPod Touch will no longer charge from a wall socket, only my computer. HELP!

    My 4th generation iPod Touch will no longer charge from a wall socket, only my computer. I tried buying a new cable and USB charging socket (and I bought one made by Apple), but that did not fix the problem. I restored it from iTunes, hoping that would work as well, but that failed. I am at my wit's end. Can anybody here help me? I've bought new equipment, tried rebooting, restoring, etc. but nothing so far has proven successful. If anyone's got a solution, please help!
    Thanks!
    Signed, a very frustrated iPod user in Ohio!
    <Edited By Host>

    All I can suggest is the standared fixes. It seems very strange
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Bring the cable and Apple wall charger too.
    Apple Retail Store - Genius Bar                                      

  • My 2nd gen IPOD touch will no longer sync with itunes.

    My 2nd gen IPOD touch will no longer sync with itunes.  it tells me it cannot read the contents of the ipod then it says the ipod software server cannot be contacted.  Any suggestions?

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem
    Then try restoring again.

  • My ipod nano will no longer sync with itunes since i have purchased an iphone 4s and synced it with itunes.

    My ipod nano will no longer sync with itunes since i purchased an iphone 4s and synced the phone with itunes.  When I plug my ipod into my imac, it does not even read or recognize my ipod.  What do i do?

    Are you using the original cable that came with Nano and not your iPhone's cable?  Have you worked through the troubleshooting in this Apple support document?
    http://support.apple.com/kb/TS1410
    B-rock

Maybe you are looking for

  • Need help in extracting value from an xml tag.

    Hi ALL, Good Morning to all, i have problem in fetching a value from a xml tag. I have created a xml schema based on the schema i have created a xmltype table and inserted a value to the table. When i am trying to fetch a value from a particular tag

  • When Installing iTunes I get an Error Message About A Registry Key

    It gives me this error message: Could not open key: HKEYLOCALMACHINE\Software\Classes\QuickTimePlayerLib.QuickTimePlayerApp\CLSID. Verify that you have sufficient access to that key, or contact your support personnel. I can't find that error listed a

  • Re: Out of Sync Audio and Muted Headphones

    when I play a DVD or watch Skygo my earphones do not cut out the volume, and I can not hear anything through the earphones. can you help

  • VERY URGENT:REGARDING ALV REPORT

    HI, I am making Interactive alv report in which i have to display 3 views in a single report i.e. 1.) I  have to display :- RAW MATERIAL      DAYS BOP                        DAYS Here days are the difference b/w the Material Doc. Date and Requsition

  • Failure obtaining db row lock: ORA-01157

    Hi, I have a client using The customer is using Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With the Partitioning, Real Application Clusters, Automatic Storage Management. Recently an application was installed wherein